Ages 18-24? Explore Prime for Young Adults and see if you are eligible

Masonry chimney flues often leak conditioned indoor air straight through traditional cast-iron throat dampers that warped decades ago. Cold drafts, chimney odors, and rainwater spill into open hearths whenever bad weather rolls through the neighborhood. Upgrading your flue cap to a us fireplace 9 x 13 det913 energy top damper stops this thermal siphon right at the roofline. Unlike leaky lower dampers, an energy-saving top-sealing unit creates an airtight boundary across your clay flue tile, locking costly indoor heat inside during bitter winter months.

Homeowners moving away from drafty open wood hearths often weigh options detailed in an electric fireplaces guide, but fixing a traditional wood-burning flue is surprisingly straightforward. The us fireplace 9 x 13 det913 energy top damper line pairs a cast-aluminum lid with durable gaskets, functioning as both an active damper and a protective chimney cap. Reviewing exact dimensions, flue opening compatibility, and assembly specs ensures your masonry hearth stays sealed against outdoor elements all year long.

1
Best Seller

US Fireplace Products Energy Top Plus 13" x 13"

US Fireplace Products
9.9 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The US Fireplace Products Energy Top Plus 13" x 13" is a top-sealing damper and cap that stops drafts and energy loss in open wood-burning masonry fireplaces. With its cast-aluminum lid and pliable rubber gasket seal, it is ideal for homeowners replacing an inefficient throat damper with an airtight rooftop seal.
Pros & Cons

Pros

  • Dual-action design functions as both an airtight damper and a weather cap
  • Pliable rubber gasket creates a conforming, draft-stopping seal at the top of the chimney
  • Sturdy cast-aluminum lid and heavy-duty spring allow smooth, low-effort operation
  • Comes completely assembled for streamlined placement on existing clay flue tile

Cons

  • Not compatible with chimneys serving vented gas log sets
  • Strictly sized for nominal 13-inch by 13-inch masonry flue dimensions
  • Requires safe rooftop access and cable routing down the chimney for proper setup
Detailed Review

The US Fireplace Products Energy Top Plus 13-inch by 13-inch damper is a top-sealing chimney cap and damper combination engineered exclusively for open wood-burning masonry fireplaces. For homeowners struggling with room drafts, foul chimney odors, or rusty, leaky throat dampers, this rooftop assembly provides a modern sealing solution. By relocating the closure point from the firebox throat all the way to the top of the flue, it seals the entire chimney against unwanted air exchange whenever the fireplace is inactive.

Performance relies on a pliable rubber gasket mounted directly to the frame, which compresses snugly against the lid upon closure. This airtight seal prevents heated winter air or cooled summer air from leaking up the flue, noticeably reducing household energy loss. At the same time, the closed damper keeps harsh exterior downdrafts, rain, and debris from entering the chimney. The integrated heavy-duty spring ensures that opening the lid before lighting a fire remains smooth and dependable.

In terms of construction, the unit features a durable cast-aluminum lid combined with a stainless-steel finish. This combination delivers weather resistance against heavy rain, snow, and sun exposure without adding unnecessary bulk to your chimney crown. Its low-profile structure maintains the clean aesthetic of traditional brick and stone chimneys, avoiding the excessive height typical of standard add-on chimney hoods.

Regarding dimensions and setup, the damper measures 13 inches by 13 inches by 9.75 inches and weighs approximately 3 pounds. It arrives fully assembled out of the box, which avoids the frustration of assembling small hardware components while standing on a roof. Installation involves securing the frame to the top clay flue tile and routing the control cable down the flue to a bracket mounted inside the firebox for convenient hearthside operation.

Important limitations must be taken into account before purchase. The manufacturer explicitly states that this damper is intended solely for open wood-burning masonry fireplaces and is not suitable for chimneys serving vented gas logs. Vented gas sets require a permanently open flue for carbon monoxide safety. Buyers should also verify the exact external dimensions of their clay flue tile to ensure the 13-inch by 13-inch size is an accurate match.

For owners of open wood-burning masonry fireplaces looking to eliminate chimney drafts and protect their flue from moisture, the US Fireplace Products Energy Top Plus is a solid, well-built choice. Confirm your flue dimensions and verify you are burning cordwood rather than gas, and this top-sealing damper will provide an airtight seal and dependable draft control for years to come.

Chimney & Flue Accessories

Unlike traditional throat dampers situated just above the firebox, top-sealing dampers shut off the chimney at its rooftop termination point. Sealing the flue at the very top keeps the entire chimney structure within the thermal envelope of the home, preventing cold air pockets and damp downdrafts from penetrating the masonry.

When pulled shut, the Energy Top Plus effectively doubles as a chimney cap, shielding the open flue against rainfall, nesting birds, and outdoor debris. When you are ready to use your fireplace, opening the mechanism from inside the firebox releases the lid fully, allowing unimpeded draft and smoke exhaust.

Fit & Dimensions

The Energy Top Plus unit is designed with a nominal footprint of 13 inches by 13 inches and has an overall height of 9.75 inches. The assembled unit weighs approximately 3 pounds, making it easy to carry and maneuver safely on top of the chimney.

Because clay flue tiles vary across different masonry constructions, buyers should physically measure the exterior width and length of their chimney liner before ordering. Proper sizing is critical to ensure the damper frame seats correctly and seals securely around the entire perimeter.

2
Editor's Pick

US Fireplace Products Energy Top Damper 13" x 13"

US Fireplace Products
9.9 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The US Fireplace Products Energy Top Damper is a 13-inch by 13-inch stainless steel chimney cap and top-sealing damper designed to stop downdrafts and heat loss in wood-burning fireplaces. It is a practical upgrade for homeowners seeking to eliminate cold chimney drafts, block rain and pests, and prevent heated indoor air from escaping through an unsealed flue.
Pros & Cons

Pros

  • Combines animal, rain, and downdraft defense with an energy-saving top-sealing damper
  • Constructed from resilient stainless steel to withstand outdoor rooftop conditions
  • Low-profile design offers a clean, discreet rooftop appearance
  • Black finish blends seamlessly with most residential chimney architectures

Cons

  • Sized specifically for 13-inch by 13-inch flues, requiring exact measurement of outer flue tile dimensions before purchase
  • Rooftop installation requires safe roof access and confirmation of control cable routing to the firebox
  • Designed for wood-burning chimneys and should not be used with unvented or certain gas-log installations requiring permanently open flues
Detailed Review

The US Fireplace Products Energy Top Damper is an exterior rooftop chimney cap featuring an integrated top-sealing damper designed specifically for wood-burning fireplace flues. It serves homeowners and remodelers looking to replace failing traditional throat dampers or eliminate energy loss through open flues. Measuring 13 inches by 13 inches with an overall height of 9.75 inches, this unit directly caps the chimney top to establish a tight thermal barrier at the very exit of the chimney structure.

Unlike traditional cast-iron throat dampers located just above the firebox, this top-sealing design stops heat loss at the rooftop. When the wood fireplace is not in use, the tight-sealing lid prevents warm room air from migrating up the flue and blocks cold downdrafts from dropping into the home. In addition to thermal conservation, the low-profile cap functions as a physical barrier that keeps precipitation from deteriorating flue masonry while preventing wildlife like birds and raccoons from nesting.

Long-term weather exposure makes build quality critical for any rooftop chimney accessory. This cap is constructed from stainless steel, providing robust resistance to rust, thermal cycling, and rooftop moisture. Finished in black, it maintains a discreet, low-profile appearance that does not overwhelm the roofline or detract from the aesthetic of traditional brick or stone chimneys.

The unit is sized for nominal 13-inch by 13-inch chimney openings, measuring 13 x 13 x 9.75 inches. Homeowners planning an installation must measure their existing flue tile exterior dimensions accurately before purchase to verify an exact fit. Because this is a rooftop-mounted accessory operating via a top-sealing mechanism, buyers should verify the included operating mechanism, mounting hardware, and installation clearance required on their chimney crown.

While top dampers provide an effective seal, installation requires accessing the roof and correctly routing the control hardware down to the hearth firebox. Buyers must confirm that their chimney tile has sufficient projection above the crown to accommodate mounting. Additionally, the manufacturer specifies this damper cap for wood-burning fireplaces; it should not be applied to gas-log fireplaces or appliances requiring permanently open flue ventilation without verifying local building codes and appliance requirements.

For owners of wood-burning fireplaces struggling with persistent winter drafts, moisture infiltration, or animal intrusion, the US Fireplace Products Energy Top Damper represents a focused, durable upgrade. If your flue matches the 13-inch by 13-inch sizing and you want to reduce household heating loss when your fireplace sits idle, this stainless steel damper cap offers reliable rooftop protection.

Fit & Dimensions

The US Fireplace Products Energy Top Damper features nominal dimensions of 13 inches by 13 inches, with an overall product profile measuring 13 x 13 x 9.75 inches. The low-profile height is engineered to stay discreet on the roofline while providing adequate clearance for flue venting when opened.

Before ordering, measure the outside dimensions of your clay flue tile at the chimney top. Top-sealing dampers require proper seating over the flue tile perimeter, so verifying the exact outer dimensions and tile height above the crown is necessary for an airtight and secure fit.

Chimney & Flue Accessories

This accessory serves a dual purpose as both a protective chimney termination cap and a functional top damper. By placing the damper seal at the top of the chimney rather than at the throat, the entire flue remains sealed against outdoor elements and cold air when closed.

When operating a wood-burning fireplace equipped with a top damper, the damper must always be locked in the fully open position before lighting a fire to ensure unrestricted exhaust of smoke and combustion gases. Regular flue cleaning and seasonal inspections help ensure the seal and opening mechanism remain free of creosote accumulation.

3
Limited Time

US Fireplace Products Top Damper Plus 13x13

US Fireplace Products
9.9 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The US Fireplace Products Top Damper Plus (13x13) is an airtight, top-mounted chimney damper and cap designed to stop conditioned air loss and block cold drafts. It is an ideal energy-saving upgrade for wood-burning fireplace owners with a compatible 13-inch by 13-inch flue looking to replace an inefficient throat damper.
Pros & Cons

Pros

  • Airtight top-sealing design helps reduce home heating and cooling loss compared to leaky throat dampers
  • Durable cast-aluminum lid and stainless steel construction withstand harsh rooftop weather exposure
  • Comes completely pre-assembled without requiring an additional fusible link or safety latch
  • Includes a manufacturer-backed limited lifetime warranty for added peace of mind

Cons

  • Requires physical access to the chimney top and roof for proper positioning and cable routing
  • Dimensions are fixed at 13 inches by 13 inches, requiring precise flue tile measurement before purchase
  • Relies on manual cable pull operation rather than automated or motorized opening
Detailed Review

The US Fireplace Products Top Damper Plus (13" x 13") is a top-mounted chimney damper and protective cap engineered for masonry fireplace owners looking to upgrade their home energy efficiency. Unlike traditional throat dampers situated just above the firebox, which frequently warp, rust, or leak, this unit seals the flue at the very top of the chimney stack. It is best suited for homeowners dealing with persistent downdrafts, unwanted odor migration, or rising heating and cooling bills caused by an open, unsealed chimney flue.

By establishing a tight seal at the chimney termination point, the damper helps trap conditioned indoor air inside your living space while blocking cold winter drafts and humid summer air from descending. The unit features an airtight cast-aluminum lid activated by a reinforced spring mechanism that compresses securely against the top frame. When opened prior to lighting a fire, the lid swings upward cleanly, allowing full clearance for exhaust smoke to draft naturally through the chimney.

Construction quality centers around corrosion-resistant materials engineered for harsh rooftop conditions. The combination of a cast-aluminum lid and stainless steel framing allows the damper to withstand high heat, acidic chimney exhaust, and year-round outdoor weather. Unlike older designs that require delicate fusible links, the Top Damper Plus does not require a fire safety link device, resulting in fewer fragile parts and dependable mechanical movement over time.

In terms of installation and fit, the damper features a 13-inch by 13-inch footprint designed to mount directly on top of standard clay flue tiles of matching dimensions. Because the unit arrives completely assembled from the factory, mounting involves securing the base to the flue tile and dropping the control cable down the interior length of the flue into the firebox. A handle and bracket are mounted inside the fireplace, allowing you to easily pull down to seal the damper shut or release tension to let the lid spring open.

A realistic limitation is that rooftop installation requires comfort with heights and proper safety precautions, or the assistance of a professional chimney sweep. Furthermore, flue tile dimensions must be carefully measured across the exterior edges before ordering, as nominal 13x13 flue tiles can vary slightly in real-world masonry builds. An incorrect size will prevent a secure seat and compromise the air seal.

For homeowners looking to eliminate drafty living rooms and protect their chimney from weather intrusion, the US Fireplace Products Top Damper Plus 13x13 provides a durable, mechanical solution. Its dual function as an all-season cap and top-sealing energy damper makes it a smart, practical investment that pays dividends in comfort and HVAC efficiency, reinforced by a limited lifetime warranty.

Chimney & Flue Accessories

A top-sealing damper serves as both an air barrier and a defensive chimney cap at the top of your masonry flue. By sealing at the exit rather than the base, it keeps the entire length of the flue warmer and drier during cold weather, reducing condensation and moisture damage inside the chimney liner.

When open, the raised lid provides ample clearance for wood smoke to draft outward freely. When closed, it blocks downdrafts, outdoor pests, leaves, and rain from entering the chimney structure.

Build Quality

The Top Damper Plus utilizes a rugged cast-aluminum lid paired with stainless steel structural elements. This pairing resists rust and exterior weather wear far better than basic galvanized or painted steel components.

The heavy-duty internal spring is calibrated to open reliably even after exposure to seasonal temperature swings and soot buildup, ensuring the lid responds smoothly to manual cable tension adjustments from the hearth below.

Warranty & Support

This product includes a manufacturer-provided limited lifetime warranty, protecting against material defects and premature component failure under normal operating conditions.

Buyers should retain proof of purchase and follow manufacturer guidelines regarding correct installation and standard chimney cleaning practices to keep the warranty protection fully intact.

4
Top Rated

US Fireplace Products Top Damper Plus 9x13-Inch

US Fireplace Products
9.8 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The US Fireplace Products Top Damper Plus (9" x 13") is an energy-saving top-mounted chimney damper engineered to halt downdrafts and stop conditioned indoor air from escaping through an open flue. Constructed from cast aluminum and stainless steel, it is a practical upgrade for homeowners seeking an air-tight seal for compatible 9x13 masonry flues.
Pros & Cons

Pros

  • Creates an air-tight top seal that helps prevent costly heating and cooling loss through the chimney flue
  • Durable dual-metal construction featuring a cast-aluminum lid and stainless steel framing
  • Stronger spring design provides reliable, straightforward open-and-close handling
  • Comes fully assembled out of the box to streamline the installation process
  • Protected by a manufacturer limited lifetime warranty

Cons

  • Sized specifically for 9-inch by 13-inch flue tiles and will not fit alternative chimney opening dimensions
  • Requires safe access to the chimney top and roof for proper placement and securing
  • Does not eliminate the need for routine chimney sweep cleanings and annual flue inspections
Detailed Review

The US Fireplace Products Top Damper Plus (9" x 13") is a rooftop-mounted chimney damper designed to eliminate draft issues and prevent expensive indoor conditioned air from escaping up the flue. Traditional low-level throat dampers frequently warp, rust, or fail to seal completely over time, leaving an open conduit for heat loss in winter and cooled air loss in summer. This top-sealing unit is purpose-built for homeowners with compatible masonry fireplaces who want an effective, weather-resilient closure at the very top of the chimney.

In terms of performance, sealing the flue at the termination point provides distinct energy and drafting advantages. By closing off the chimney at the top, the damper prevents the entire chimney flue from filling with cold outside air during winter months, which often creates difficult start-up drafts and downdrafts. The air-tight seal helps maintain your home's conditioned environment when the fireplace sits idle, offering all-season protection against unwanted drafts and air exchange.

The build quality centers on resilient exterior materials meant to withstand continuous exposure to outdoor elements. This damper utilizes a cast-aluminum lid paired with stainless steel structural components to resist corrosion and weather wear. The design incorporates a reinforced, stronger spring mechanism that facilitates smoother opening and closing cycles compared to basic top dampers, ensuring the lid lifts cleanly when venting is required and pulls down securely to seat the gasket when closed.

Installation is streamlined because the unit arrives completely assembled and ready to install directly over the flue. Unlike some alternative damper setups, the Top Damper Plus does not require a fusible link or separate fire safety device, eliminating intricate fail-safe adjustments during the initial mount. However, because this accessory installs at the top of the chimney, homeowners must have safe roof access and appropriate chimney-crown mounting materials to complete the setup securely.

The most critical limitation to keep in mind is physical sizing. This damper is built strictly for a 9-inch by 13-inch flue opening, making accurate measurement of your chimney flue tile essential prior to purchase. It will not adapt to round metal liners or irregular rectangular masonry openings without proper adapters or sizing alignment. Regular chimney maintenance and professional sweeps are still necessary to keep the flue clean and the damper linkage operating smoothly.

For owners of masonry wood-burning fireplaces looking to replace a leaky throat damper or enhance household energy efficiency, the US Fireplace Products Top Damper Plus is a sensible and sturdy investment. Its robust cast-aluminum and stainless steel construction, combined with a manufacturer limited lifetime warranty, makes it a reliable solution for year-round draft protection on 9x13 flues.

Fit & Dimensions

This damper is designed specifically for chimneys with nominal 9-inch by 13-inch flue dimensions. Before ordering, verify both the outside and inside measurements of your clay or masonry flue tile at the chimney top.

Because flue tile dimensions can vary slightly among masonry installations, ensuring a level, undamaged tile surface is critical for establishing an air-tight seal. This model is not intended for round metal chimney pipes or non-rectangular flue configurations.

Chimney & Flue Accessories

Top-sealing dampers function fundamentally differently from standard cast-iron throat dampers located directly above the firebox. By placing the sealing mechanism at the chimney cap level, the entire flue volume remains sealed inside the home envelope, keeping the masonry warmer and preventing cold air pooling.

When the fireplace is in use, opening the damper provides an unobstructed exhaust path for combustion gases. The unit features an upgraded spring to ensure positive opening action, while the pre-assembled build avoids unnecessary complexity during rooftop placement.

Warranty & Support

The US Fireplace Products Top Damper Plus comes with a limited lifetime warranty from the manufacturer, providing long-term assurance against material and manufacturing defects under normal operating conditions.

For warranty terms and proper operational guidelines, reference the documentation supplied with the unit. Regular chimney maintenance and cleanings help preserve the mechanical linkage and spring performance over the lifetime of the product.

5

US Fireplace Products Energy Top Plus 9x13

US Fireplace Products
9.8 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The US Fireplace Products Energy Top Plus is a 9-inch by 13-inch top-sealing damper and cap engineered to eliminate room drafts and conditioned air loss in open wood-burning masonry fireplaces. It is an ideal upgrade for homeowners seeking an airtight rubber gasket seal at the flue top to replace drafty traditional throat dampers.
Pros & Cons

Pros

  • Dual-action design seals out weather and pests while acting as an energy-saving damper
  • Flexible rubber gasket provides a tighter seal than metal-to-metal throat dampers
  • Durable cast-aluminum lid resists rust and stands up to harsh outdoor exposure
  • Comes fully assembled out of the box for direct rooftop attachment

Cons

  • Strictly prohibited for use with chimneys serving vented gas log sets
  • Requires safe rooftop access and cable routing down the chimney flue to install
  • Sized specifically for 9-inch by 13-inch openings and will not fit round or oversized flues
Detailed Review

The US Fireplace Products Energy Top Plus is a low-profile, top-sealing damper and integrated chimney cap manufactured specifically for open wood-burning masonry fireplaces. Traditional metal throat dampers located directly above the firebox often warp, corrode, or fit loosely over time, allowing heated room air to escape up the chimney during winter and permitting hot outdoor air or downdrafts to infiltrate in summer. This top-mount assembly replaces or bypasses inadequate throat dampers by sealing the chimney system at its ultimate exit point.

Performance centers on an airtight closure system that utilizes a soft, pliable rubber gasket mounted along the outer frame. When the lid is pulled shut, the gasket compresses against the lid rim, creating a tight mechanical seal that blocks air currents, rain, debris, and animal entry. When opened for a fire, the lid swings upward to allow unrestricted draft and exhaust clearance. This dual functionality eliminates the separate need for an auxiliary chimney cap while sealing the entire flue volume inside the home's thermal envelope.

Construction quality emphasizes corrosion resistance and mechanical dependability. The assembly features a cast-aluminum lid designed to withstand continuous exposure to rain, snow, and sunlight without the rust issues typical of painted steel caps. Operating tension is managed by a heavy-duty spring mechanism engineered to open the lid cleanly upon release and maintain positive sealing pressure when closed. The overall frame uses durable materials suited for chimney crown mounting, keeping the total unit weight down to an easy-to-handle 3 pounds.

Installation occurs directly on the top clay flue tile or chimney crown. Because the Energy Top Plus arrives pre-assembled, preparation primarily involves positioning the base, securing it with appropriate sealant or hardware, and routing the control cable down the interior of the flue to the firebox bracket. The low-profile silhouette provides clean aesthetic integration on the chimney top without towering above the roofline.

Important functional limitations apply to fuel and venting configuration. This unit is strictly engineered for open, wood-burning masonry fireplaces. It is expressly prohibited for use on chimneys connected to vented gas log sets, where codes and safety standards require permanent, fixed ventilation to prevent carbon monoxide buildup. Homeowners must also physically measure the outside dimensions of their top clay flue tile to confirm that a 9-inch by 13-inch profile matches their specific setup prior to purchase.

For owners of open masonry wood fireplaces dealing with noticeable room drafts, foul chimney odors, or leaking throat dampers, this top-sealing assembly offers a well-constructed and energy-conscious replacement. Its robust spring hardware, cast-aluminum cover, and rubber gasket provide dependable draft prevention when the fireplace is out of use.

Chimney & Flue Compatibility

The Energy Top Plus is designed strictly for open, wood-burning masonry fireplaces. It cannot be used on factory-built prefabricated metal chimneys, pellet venting, wood stove pipes, or chimneys connected to vented gas log sets. Gas log installations require an open flue pathway at all times to ensure exhaust gases escape safely, making tight-sealing top dampers incompatible with vented gas appliances.

Before ordering, inspect the chimney top to verify that the clay flue liner extends cleanly above the chimney crown and matches nominal 9-inch by 13-inch rectangular measurements. The mounting surface must be flat, stable, and free of cracked masonry to ensure the damper frame seats evenly and maintains an effective weather seal.

Fit & Dimensions

This damper model is sized for nominal 9-inch by 13-inch rectangular masonry flue tiles. The unit itself weighs approximately 3 pounds, making it easy to maneuver during ladder or roof work. Packaging measurements are listed at 10 by 12 by 16 inches, but the operating footprint is engineered to seat directly over standard 9x13 clay flue tops.

Always verify both inside and outside flue tile dimensions before ordering. Clay tile liners can vary slightly in wall thickness and exterior profile, so ensuring adequate perimeter clearance on the chimney crown will guarantee that the cast-aluminum lid can open and shut without binding against surrounding brickwork.

6

US Fireplace Products 9x13 Seal Tight Damper

US Fireplace Products
9.6 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The US Fireplace Products 9" x 13" Seal Tight Damper is an airtight, top-mounted chimney damper designed to eliminate draft loss and retain heat in open masonry wood-burning fireplaces. Featuring a specialized dual-gasket system, it is an ideal energy-saving upgrade for homeowners seeking to replace leaky cast-iron throat dampers.
Pros & Cons

Pros

  • Airtight dual-gasket design seals the flue tightly to maximize indoor heat retention and block drafts
  • Arrives fully assembled and ready to install directly onto compatible masonry chimney tops
  • Does not require the addition of a separate fire safety device for wood-burning installations
  • Lightweight design at just under 3 pounds facilitates easier handling and mounting

Cons

  • Strictly prohibited for use on chimneys serving vented gas log sets
  • Requires physical rooftop access and accurate chimney flue measuring for proper installation
  • Restricted exclusively to open masonry fireplaces matching the 9" x 13" nominal size
Detailed Review

The US Fireplace Products 9" x 13" Seal Tight Damper is an exterior, top-sealing chimney cap damper designed for homeowners looking to eliminate draftiness and reduce conditioned air loss through open masonry fireplaces. Traditional wood-burning fireplaces frequently lose valuable indoor warmth through warped, ill-fitting, or missing throat dampers located just above the firebox. By sealing the chimney flue tightly at the very top of the stack, this damper stops the escape of heated indoor air and prevents cold downdrafts from entering the living space.

Energy retention centers on the manufacturer's specialized high-tech dual-gasket sealing configuration. The primary gasket sits embedded within a channel inside the damper frame, while a secondary liquid gasket is placed directly underneath the front portion of the damper lid. When closed, this two-part seal creates an airtight barrier that delivers superior thermal efficiency compared to traditional metal-to-metal throat dampers, keeping living areas more comfortable when the fireplace is not in active use.

Crafted with durable materials in a standard black finish, the unit weighs an accessible 2.98 pounds, making rooftop handling straightforward. The damper comes completely assembled right out of the box, eliminating the need to piece together loose hardware before securing it to the chimney top. In addition, the manufacturer specifies that the damper does not require an auxiliary fire safety device, ensuring simple, unobstructed operation through standard manual controls.

Proper installation requires exact sizing verification prior to ordering. Designed specifically for 9" x 13" masonry chimney flues, the unit mounts directly to the top clay flue tile. Homeowners should verify their exterior tile dimensions and wall thickness to confirm the frame will seat cleanly without gaps. Because chimney top installation involves working at roof height, property owners should take appropriate safety precautions or consult a chimney professional if comfortable rooftop access is not available.

A critical operational restriction is fuel compatibility. The manufacturer explicitly states that the Seal Tight Damper is made exclusively for open, wood-burning masonry chimneys and is not suitable for chimneys serving vented gas logs. Vented gas hearth appliances require a permanent flue opening or fixed damper clamp to prevent combustion byproducts from accumulating in the home, making airtight dampers unsafe for vented gas applications.

For homeowners operating standard open masonry wood fireplaces, the US Fireplace Products 9" x 13" Seal Tight Damper provides an effective way to resolve persistent winter drafts and seasonal energy loss. As long as flue measurements match the 9" x 13" specification and the fireplace strictly burns cordwood rather than vented gas logs, this pre-assembled damper serves as a practical, high-efficiency sealing upgrade.

Chimney & Flue Accessories

Top-sealing dampers function as both an energy-saving closure and an environmental barrier for masonry flues. By locating the seal at the chimney termination rather than inside the throat, the entire chimney flue remains warmer and protected against cold exterior drafts when closed.

The dual-gasket system on this model utilizes both a channel-mounted primary gasket and a forward liquid gasket. This configuration stops the chimney from acting as a giant exhaust vent for central household heating when the firebox is dark.

Note that this accessory is solely intended for masonry chimneys serving open wood-burning fireplaces. It must never be installed on flues connected to vented gas log sets, as gas appliances require continuous or mechanically restricted flue pathways to meet safety standards.

Fit & Dimensions

The US Fireplace Products Seal Tight Damper is manufactured to fit nominal 9" x 13" rectangular masonry chimney flue tiles. Before purchasing, verify the exterior length, width, and lip profile of your existing chimney tile.

Weighing approximately 2.98 pounds, the unit is lightweight enough to transport safely up a ladder to the chimney crown. It arrives completely assembled, minimizing work needed while positioned on the roof.

Ensure your chimney structure is a traditional open masonry build. This damper is not designed for factory-built zero-clearance metal chimneys or chimneys venting alternative fuel appliances.

7

US Fireplace Products 9" x 13" Top Damper Chimney

US Fireplace Products
9.6 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The US Fireplace Products 9" x 13" Top Damper is a top-sealing cap designed to shut out downdrafts, rain, and snow at the flue exit of a wood-burning fireplace. It is an ideal replacement for leaky throat dampers, giving homeowners a durable, rust-resistant seal made from cast aluminum and stainless steel.
Pros & Cons

Pros

  • Cast-aluminum and stainless steel construction eliminates rust runoff and stains on chimney brick
  • Seals the chimney at the top to stop cold downdrafts and weather before entering the flue
  • Low-profile design keeps your roofline clean and is barely noticeable from ground level
  • Comes fully assembled to save time and effort during rooftop installation

Cons

  • Fits only 9-inch by 13-inch flue sizes and will not work on round or larger rectangular flues
  • Requires safe roof access and proper installation down the flue to the firebox
  • Designed strictly for wood-burning chimneys and not intended for gas logs without verifying local codes
Detailed Review

The US Fireplace Products 9" x 13" Top Damper is an exterior chimney cap and top-sealing damper combination engineered for wood-burning masonry chimneys. Traditional throat dampers located just above the firebox often warp, rust, or fail to seal completely over time, allowing conditioned indoor air to escape and outside drafts to enter. This unit addresses that issue by sealing the chimney at the very top of the flue, making it a reliable solution for homeowners dealing with cold chimney drafts, moisture buildup, or damaged lower dampers.

In terms of practical performance, sealing a chimney at the top prevents cold outdoor air, rain, and sleet from descending down the entire length of the flue structure. Because the lid is built from lightweight cast aluminum, the damper mechanism opens significantly higher than heavier steel caps, ensuring optimal exhaust airflow when burning wood. When shut, the snug perimeter seal blocks out exterior elements, helping to keep the fireplace dry and prevent energy loss throughout the winter months.

Build quality is focused on exterior durability and weather resistance. The primary components utilize cast aluminum and stainless steel, two metals well-suited for acidic flue gases and harsh outdoor exposure. These materials will not rust, which is crucial for preventing unsightly orange rust streaks down exterior chimney brick or stone masonry. Furthermore, the low-profile profile ensures the unit remains virtually invisible from the ground when closed, preserving the architectural look of your home.

Installation and setup are simplified by the fact that the unit ships completely assembled out of the box. Designed to fit standard 9-inch by 13-inch rectangular flue tiles, it does not require an auxiliary fire safety device per manufacturer guidelines. Homeowners will need to ensure safe access to the chimney crown and plan for routing the operating cable down through the flue to the firebox interior, where the opening and closing bracket is mounted for convenient daily use.

The main limitation of this top damper is its strict sizing requirement. It is built specifically for 9-inch by 13-inch rectangular flues, so precise measurement of your clay flue tile exterior dimensions is essential before ordering. Additionally, while ideal for standard open wood-burning fireplaces, flues converted for use with vented gas logs often have different damper stop requirements under local building codes, which buyers must verify before installation.

For owners of wood-burning fireplaces with matching 9-inch by 13-inch flues, the US Fireplace Products Top Damper provides an efficient, long-lasting replacement for inefficient cast-iron throat dampers. Its pre-assembled design, corrosion-resistant metals, and effective top-sealing lid make it a dependable upgrade for weather protection and home comfort.

Chimney & Flue Accessories

Top-sealing dampers function fundamentally differently than standard throat dampers by sealing the chimney at the ultimate termination point rather than inside the firebox. This keeps the flue tile warmer during winter, minimizes interior moisture damage from rain and sleet, and prevents debris from accumulating in the chimney shaft.

Before purchasing, always measure the exterior length and width of your existing clay flue tile projecting from the chimney crown. A 9-inch by 13-inch nominal designation must match your flue structure for a proper, secure fit. Homeowners should also inspect the chimney crown mortar to ensure a level, sound base for mounting.

Frequently Asked Questions

How does the us fireplace 9 x 13 det913 energy top damper prevent home heat loss?

Top-sealing dampers stop heat loss by creating a gasketed barrier at the chimney rim rather than inside the lower firebox. The us fireplace 9 x 13 det913 energy top damper features a flexible rubber gasket attached to the frame that compresses tightly against the cast-aluminum lid when closed. This design keeps warm indoor air from rising into the chimney stack and prevents freezing exterior drafts from sinking down your flue.

Can this top damper be used with vented gas logs?

No, top-sealing dampers are engineered strictly for open, wood-burning masonry chimneys and cannot be used on chimneys serving vented gas logs. Gas log systems require permanent draft openings to vent combustion exhaust safely, which differs from sealed systems seen on direct vent fireplaces. Installing a sealing damper on a chimney with gas logs risks trapping carbon monoxide inside the living room.

What flue size is required for the 9 inch by 13 inch damper?

The damper frame requires a nominal 9 inch by 13 inch clay chimney flue liner. Because clay flue tiles vary slightly in actual inside dimensions, measure the interior opening of your flue tile at the chimney crown before ordering. The mounting base adheres directly to the flat top edge of the chimney flue tile using heat-resistant adhesive sealant.

Does the Energy Top Plus damper require a fire safety fusible link?

No, manufacturer specifications state that this damper does not require a fire safety device or fusible link mechanism. The unit arrives completely assembled and ready to install at the top of the chimney. Spring tension holds the cast-aluminum lid fully open during wood-burning fires, ensuring smooth exhaust flow without extra mechanical release devices.

Does the top damper double as an effective chimney cap?

Yes, the cast-aluminum lid shields the flue opening from rain, sleet, snow, and nesting animals whenever the damper is closed. While traditional throat dampers leave the upper chimney flue exposed to weather, the us fireplace 9 x 13 det913 energy top damper provides all-season weather protection. In its closed position, the low-profile lid remains discreet from ground level while stopping water damage inside the flue.

How is a chimney top damper operated from inside the home?

A stainless steel cable drops down the entire length of the chimney flue to a handle mounted in the firebox. Pulling the handle pulls the cable downward, compressing the damper lid against the gasket to seal the flue shut. Releasing the handle from its bracket allows the heavy-duty upper spring to push the lid open before lighting a fire.