Ages 18-24? Explore Prime for Young Adults and see if you are eligible

Stopping Downdrafts And Hearth Heat Loss

Cold air dumping down an open chimney flue quickly turns a cozy living room into a drafty, uncomfortable space. Traditional cast-iron throat dampers often warp or rust, allowing furnace heat to escape outside all day long. Investing in a Us Fireplace 13 X 18 Det1318 Energy Top Damper mounts directly on top of your clay flue tile to create a tight seal right at the chimney exit. Homeowners considering supplemental heat often check out Napoleon wall-mount electric fireplaces, but protecting an existing wood-burning hearth starts by capping off that open escape route.

Factory-built units such as Heatilator Caliber fireplaces use dedicated vents, while masonry hearths demand robust top-sealing caps to block downdrafts and wet weather. A reliable top-sealing damper acts as both a draft stopper and an all-weather chimney cap. Models from US Fireplace Products feature durable cast-aluminum lids, stainless steel frames, and pre-assembled hardware that simplifies rooftop setup. Checking your flue tile outer dimensions ensures a snug, weather-resistant fit that prevents costly air leaks.

1
Best Seller

US Fireplace Products Top Damper Plus 13x13

US Fireplace Products
9.9 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The US Fireplace Products Top Damper Plus (13x13) is an airtight, top-mounted chimney damper and cap designed to stop conditioned air loss and block cold drafts. It is an ideal energy-saving upgrade for wood-burning fireplace owners with a compatible 13-inch by 13-inch flue looking to replace an inefficient throat damper.
Pros & Cons

Pros

  • Airtight top-sealing design helps reduce home heating and cooling loss compared to leaky throat dampers
  • Durable cast-aluminum lid and stainless steel construction withstand harsh rooftop weather exposure
  • Comes completely pre-assembled without requiring an additional fusible link or safety latch
  • Includes a manufacturer-backed limited lifetime warranty for added peace of mind

Cons

  • Requires physical access to the chimney top and roof for proper positioning and cable routing
  • Dimensions are fixed at 13 inches by 13 inches, requiring precise flue tile measurement before purchase
  • Relies on manual cable pull operation rather than automated or motorized opening
Detailed Review

The US Fireplace Products Top Damper Plus (13" x 13") is a top-mounted chimney damper and protective cap engineered for masonry fireplace owners looking to upgrade their home energy efficiency. Unlike traditional throat dampers situated just above the firebox, which frequently warp, rust, or leak, this unit seals the flue at the very top of the chimney stack. It is best suited for homeowners dealing with persistent downdrafts, unwanted odor migration, or rising heating and cooling bills caused by an open, unsealed chimney flue.

By establishing a tight seal at the chimney termination point, the damper helps trap conditioned indoor air inside your living space while blocking cold winter drafts and humid summer air from descending. The unit features an airtight cast-aluminum lid activated by a reinforced spring mechanism that compresses securely against the top frame. When opened prior to lighting a fire, the lid swings upward cleanly, allowing full clearance for exhaust smoke to draft naturally through the chimney.

Construction quality centers around corrosion-resistant materials engineered for harsh rooftop conditions. The combination of a cast-aluminum lid and stainless steel framing allows the damper to withstand high heat, acidic chimney exhaust, and year-round outdoor weather. Unlike older designs that require delicate fusible links, the Top Damper Plus does not require a fire safety link device, resulting in fewer fragile parts and dependable mechanical movement over time.

In terms of installation and fit, the damper features a 13-inch by 13-inch footprint designed to mount directly on top of standard clay flue tiles of matching dimensions. Because the unit arrives completely assembled from the factory, mounting involves securing the base to the flue tile and dropping the control cable down the interior length of the flue into the firebox. A handle and bracket are mounted inside the fireplace, allowing you to easily pull down to seal the damper shut or release tension to let the lid spring open.

A realistic limitation is that rooftop installation requires comfort with heights and proper safety precautions, or the assistance of a professional chimney sweep. Furthermore, flue tile dimensions must be carefully measured across the exterior edges before ordering, as nominal 13x13 flue tiles can vary slightly in real-world masonry builds. An incorrect size will prevent a secure seat and compromise the air seal.

For homeowners looking to eliminate drafty living rooms and protect their chimney from weather intrusion, the US Fireplace Products Top Damper Plus 13x13 provides a durable, mechanical solution. Its dual function as an all-season cap and top-sealing energy damper makes it a smart, practical investment that pays dividends in comfort and HVAC efficiency, reinforced by a limited lifetime warranty.

Chimney & Flue Accessories

A top-sealing damper serves as both an air barrier and a defensive chimney cap at the top of your masonry flue. By sealing at the exit rather than the base, it keeps the entire length of the flue warmer and drier during cold weather, reducing condensation and moisture damage inside the chimney liner.

When open, the raised lid provides ample clearance for wood smoke to draft outward freely. When closed, it blocks downdrafts, outdoor pests, leaves, and rain from entering the chimney structure.

Build Quality

The Top Damper Plus utilizes a rugged cast-aluminum lid paired with stainless steel structural elements. This pairing resists rust and exterior weather wear far better than basic galvanized or painted steel components.

The heavy-duty internal spring is calibrated to open reliably even after exposure to seasonal temperature swings and soot buildup, ensuring the lid responds smoothly to manual cable tension adjustments from the hearth below.

Warranty & Support

This product includes a manufacturer-provided limited lifetime warranty, protecting against material defects and premature component failure under normal operating conditions.

Buyers should retain proof of purchase and follow manufacturer guidelines regarding correct installation and standard chimney cleaning practices to keep the warranty protection fully intact.

2
Editor's Pick

US Fireplace Products Seal Tight Chimney Damper

US Fireplace Products
9.8 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The US Fireplace Products Seal Tight Damper (13" x 18") is a top-sealing chimney damper designed to eliminate drafts and retain heat in wood-burning masonry chimneys. Equipped with a dual-gasket air-tight seal and pre-assembled construction, it is an ideal energy-saving retrofit for homeowners with open masonry fireplaces who do not use vented gas logs.
Pros & Cons

Pros

  • Dual-gasket mechanism delivers an air-tight seal to prevent cold downdrafts and heat loss.
  • Comes completely pre-assembled and ready to mount on compatible masonry flue tiles.
  • Eliminates the draftiness common with warped or loose traditional throat dampers.
  • Designed specifically to fit standard 13-inch by 18-inch masonry flue dimensions.

Cons

  • Strictly prohibited for use on chimneys venting gas logs due to safety regulations.
  • Installation requires rooftop access and proper safety precautions on the chimney crown.
  • Dimensions are fixed at 13 inches by 18 inches, requiring precise flue tile measurement prior to purchase.
Detailed Review

The US Fireplace Products Seal Tight Damper 13" x 18" is a top-sealing chimney damper designed to replace or bypass inefficient traditional throat dampers in open, wood-burning masonry fireplaces. Installed at the very top of the chimney stack, this accessory closes off the entire flue when the fireplace is not in use. It is engineered for homeowners who experience persistent cold drafts dropping down into the hearth area or notice heated living room air escaping unchecked up an open flue.

The defining performance feature of this unit is its dual-gasket sealing system. Unlike metal-on-metal throat plates that frequently warp and leak, this damper provides an air-tight seal utilizing two distinct gasket elements. The primary gasket sits inside a formed channel within the damper frame, while a secondary liquid gasket rests beneath the front portion of the lid. When pulled shut, these components compress together to create a reliable barrier against air exchange, helping keep conditioned indoor warmth inside your living space.

In terms of construction, the unit comes finished in black and weighs 5.13 pounds, balancing structural durability with manageable rooftop handling. The design does not require an auxiliary fire safety device and is manufactured from heavy-duty materials intended to withstand outdoor rooftop exposure. The mechanical hinge and lid assembly are engineered for fluid operation, allowing smooth opening before lighting a fire and positive latching once the hearth has fully cooled.

Setup is facilitated by the fact that the damper arrives completely assembled and ready to install directly over a 13-inch by 18-inch masonry flue tile. With packaged outer dimensions of 24 x 24 x 12 inches, the hardware sits squarely atop the chimney crown. Because mounting requires working at the chimney termination point, homeowners should ensure comfortable roof access and appropriate adhesive or mounting hardware, or arrange for installation by a local chimney technician.

A critical limitation to evaluate before buying is appliance compatibility. The manufacturer explicitly restricts the Seal Tight Damper to open, wood-burning masonry fireplace chimneys. It is not suitable for chimneys serving vented gas logs, which require a permanently open or mechanically blocked flue to prevent the accumulation of combustion byproducts. Verifying the exact outer dimensions of your clay flue liner is also essential, as it will not fit round metal liners or flues with differing cross-sections.

For owners of open wood-burning fireplaces with compatible 13-inch by 18-inch masonry chimneys, the US Fireplace Products Seal Tight Damper offers a direct, highly effective remedy for flue drafts. Its dual-gasket barrier provides a significant upgrade over worn cast-iron throat dampers, making it a sensible investment for whole-house draft reduction and seasonal energy conservation.

Compatibility & Flue Sizing

This chimney damper is built exclusively for open, wood-burning masonry fireplace chimneys with nominal 13-inch by 18-inch rectangular flue dimensions. It is not designed to fit prefabricated metal chimneys, round flue pipes, or zero-clearance factory-built fireplaces.

This damper must not be installed on any chimney serving vented gas logs. Vented gas sets produce combustion gases that require an unobstructed vent path at all times, making air-tight top-sealing dampers a code violation and safety hazard in those specific applications. Always measure the outside edge of your existing flue tile before ordering to ensure correct fitment.

Installation & Safety

Because the Seal Tight Damper mounts at the very top of your chimney, installation requires working on the roof. Proper rooftop fall protection, ladder stabilization, and basic masonry sealing materials are necessary to secure the frame to the chimney tile.

The unit ships completely assembled, eliminating on-site mechanical alignment. Once installed, the damper must always be checked and placed in the fully open position before lighting any fire in the hearth. Homeowners should only close the damper when the fire is completely extinguished and all ashes have cooled.

3
Limited Time

US Fireplace Products 13x18 Energy Top Chimney

US Fireplace Products
9.7 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The US Fireplace Products Energy Top Damper is a 13-inch by 18-inch top-sealing damper and low-profile cap designed for wood-burning fireplaces. It is an ideal solution for homeowners looking to stop cold downdrafts, prevent conditioned air loss, and protect their chimney flue from rain and animal intrusion.
Pros & Cons

Pros

  • Serves double duty as an energy-saving damper and an animal-blocking chimney cap
  • Stainless steel construction provides long-term weather and corrosion resistance
  • Low-profile aesthetic sits cleanly on the chimney crown without looking bulky
  • Helps stabilize room temperatures by sealing the flue at the roofline

Cons

  • Requires safe rooftop access and firebox cable routing for complete installation
  • Fits only 13-inch by 18-inch flues and will not accommodate round or mismatch-sized openings
  • Specified strictly for wood-burning fireplaces and not intended for gas log or pellet stove flues
Detailed Review

The US Fireplace Products Energy Top Damper is a dedicated combination chimney cap and top-sealing damper engineered for wood-burning fireplaces with 13-inch by 18-inch flues. This accessory directly serves homeowners dealing with drafty living rooms, high winter heating losses, or failing throat dampers that allow conditioned indoor air to escape straight up the chimney.

Operating at the top of the flue instead of inside the firebox provides distinct thermal benefits. Traditional throat dampers leave the entire masonry chimney column exposed to outdoor temperatures, chilling the brickwork and leaking drafts into the home. By sealing the chimney at the roofline, this top damper traps warm air inside the house, stops chilly downdrafts, and protects the entire length of the flue from freezing temperatures when no fire is burning.

Rooftop installations face direct weather exposure, and this damper cap is built from durable stainless steel with a black finish to ensure long-term durability against rain, snow, and sun. The low-profile silhouette provides a clean, understated aesthetic on the chimney crown while still leaving sufficient clearance for wood smoke to vent freely when the mechanism is open.

The unit measures 18 by 13 by 9 inches overall, matching standard 13-inch by 18-inch rectangular clay flues. Setup involves mounting the base to the chimney top and dropping an operational cable down the interior of the flue into the fireplace firebox, where a manual bracket allows you to open or latch the damper shut. Homeowners should physically measure both the outer and inner dimensions of their chimney flue tile before ordering to ensure proper seating.

A critical consideration is fireplace fuel compatibility. This top damper is designed specifically for wood-burning fireplace flues and should not be used on gas log sets with standing pilots or appliances that require continuous, unblockable venting according to local mechanical codes. Proper clearance from combustible roofing components and routine sweeping access must also be maintained.

For owners of open-masonry, wood-burning hearths seeking to solve draft issues and replace an inefficient throat damper, the US Fireplace Products Energy Top Damper offers a durable, dual-purpose solution. It delivers reliable weather protection and pest defense while helping preserve indoor heating efficiency throughout the year.

Chimney & Flue Accessories

Top-sealing dampers provide an effective barrier against chimney-related heat loss compared to low-mounted cast-iron throat dampers. When a traditional damper closes right above the firebox, the cold exterior air still fills the entire chimney liner, cooling down the surrounding interior walls of the home. Sealing the flue at the rooftop maintains warmer flue temperatures and helps eliminate cold-air siphoning into living spaces.

In addition to draft control, this unit acts as a permanent chimney cap. The exterior hood keeps rain, snow, downdrafts, and nesting wildlife out of the flue, protecting the masonry and chimney liner from water damage and blockages even when the damper is left open during fireplace use.

Fit & Dimensions

This chimney cap damper is sized for 13-inch by 18-inch rectangular flues, with overall product dimensions measuring 18 inches long, 13 inches wide, and 9 inches high. It is designed to mount directly to the top clay flue tile or chimney crown.

Always verify the exact dimensions of your existing chimney tile before ordering, as actual outer measurements can differ slightly from nominal trade sizes. A clean, structurally sound flue top and crown surface are necessary to ensure a secure mechanical fit and a tight rooftop seal.

4
Top Rated

US Fireplace Products Top Damper Plus 13" x 18"

US Fireplace Products
9.6 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The US Fireplace Products Top Damper Plus (13" x 18") is a top-sealing chimney cap and damper combination designed to seal in conditioned air and block downdrafts at the chimney flue exit. It is best suited for homeowners with compatible 13-inch by 18-inch masonry flues looking to replace leaky throat dampers and reduce household energy loss.
Pros & Cons

Pros

  • Airtight top-sealing design stops warm air escape far more effectively than traditional firebox throat dampers
  • Durable combination of cast-aluminum and stainless steel stands up to flue gases and harsh outdoor weather
  • Arrives fully assembled to minimize assembly time on the roof
  • Strong internal spring ensures reliable opening when tension is released at the hearth cable
  • Supported by manufacturer limited lifetime warranty coverage

Cons

  • Requires exact measurement because it is designed specifically for 13-inch by 18-inch flues and will not fit other sizes
  • Installation requires safe access to the chimney crown on the roof and dropping an operating cable down the flue
  • Does not eliminate the need for regular flue clearance checks and professional chimney sweeping
Detailed Review

The US Fireplace Products Top Damper Plus 13" x 18" is an exterior, top-sealing chimney cap and damper combination designed for wood-burning masonry chimneys. Traditional throat dampers located just above the fireplace firebox frequently warp, rust, or fail to seal completely, which allows heated interior air in winter and cooled air in summer to escape up the chimney column. This unit is tailored for homeowners looking to cap and seal their flue at the chimney top to reduce drafts, keep out external moisture and debris, and improve whole-home energy retention.

Operating at the flue termination rather than the hearth throat, this top-sealing damper establishes a tight physical barrier against outdoor weather extremes. When closed, the cast-aluminum lid sits securely to block cold downdrafts in the winter and humid exterior air in the summer, helping maintain stable living-space temperatures. The built-in spring assembly provides the necessary tension to lift the lid open fully when the fireplace is in use, facilitating natural draft flow while venting combustion gases safely out of the home.

Construction centers on a combination of a cast-aluminum lid and stainless steel hardware, offering corrosion resistance against precipitation and flue gases. The gray finish blends cleanly with exterior masonry crowns and clay chimney liners. The design incorporates a reinforced spring that facilitates consistent opening and closing action, minimizing sticking or binding common in older top-mounted dampers. Additionally, the manufacturer notes that this unit does not require a fusible link or specialized fire safety device, streamlining the mechanical assembly.

Installation involves securing the unit atop a 13-inch by 18-inch flue tile, running the operational cable down the interior of the chimney flue, and fastening the control bracket in or near the fireplace firebox. Because the unit ships completely assembled, rooftop assembly of individual linkages is eliminated. Daily operation is straightforward: releasing the hearth-mounted cable lever allows the heavy-duty spring to lift the lid open before lighting a fire, while pulling and latching the cable seals the lid shut once the fire and coals are completely cold.

Buyers must verify the exact outer and inner dimensions of their chimney flue tile prior to ordering, as a 13-inch by 18-inch damper will not seal correctly on flues with differing nominal dimensions or cracked clay liners. The installation also requires safe access to the roof and proper cable routing through any remaining throat damper assembly down to the hearth. As with any flue modification, homeowners should confirm chimney sweeping and structural soundness before mounting a top-mount damper.

For homeowners with a compatible 13-inch by 18-inch flue who want to eliminate stubborn fireplace drafts and upgrade leaky throat dampers, the US Fireplace Products Top Damper Plus offers a practical, heavy-duty solution. Backed by a limited lifetime warranty and durable dual-metal construction, it delivers reliable draft control and all-season protection when installed according to manufacturer instructions.

Fit & Dimensions

The Top Damper Plus is engineered specifically for chimneys with 13-inch by 18-inch nominal flue openings. Homeowners should measure the exterior and interior perimeter of their clay flue liner at the chimney top to verify compatibility before purchase. A proper fit ensures an airtight perimeter seal and prevents water or debris from bypassing the damper lid.

Chimney & Flue Accessories

As a top-mounted chimney damper, this accessory mounts at the flue exit on the chimney crown rather than inside the lower throat area above the firebox. It includes a cast-aluminum lid, a stainless steel mounting frame, and an internal spring mechanism designed for smooth cable actuation from the hearth below. When properly installed, it functions as both an energy-saving seal and a protective weather cap.

Warranty & Support

US Fireplace Products backs this 13x18 Top Damper Plus with a limited lifetime warranty covering manufacturing and material defects. Buyers should consult the included manufacturer documentation for specific installation guidelines, operational care, and warranty claim procedures.

Frequently Asked Questions About Chimney Dampers

How does a top damper like the Us Fireplace 13 X 18 Det1318 Energy Top Damper differ from a throat damper?

A top damper seals the chimney at the roofline rather than directly above the firebox. Traditional throat dampers leave the entire masonry flue open to frigid air, soot odor, and moisture. Capping the top keeps the flue warmer and stops downdrafts from cooling down the house.

What flue size fits a 13 by 18 inch top damper?

A 13 by 18 damper fits nominal 13 inch by 18 inch rectangular clay flue tiles on masonry chimneys. Homeowners must measure the outer perimeter of the protruding clay flue liner to confirm mounting clearance before securing the base with silicone adhesive.

Can the Us Fireplace 13 X 18 Det1318 Energy Top Damper be installed on chimneys serving vented gas logs?

No. Manufacturer instructions explicitly state that the Seal Tight damper is built only for open wood-burning masonry chimneys. It cannot serve vented gas logs or units like Heatilator Novus 36 natural gas fireplaces, where safety codes demand open ventilation to prevent carbon monoxide buildup.

Does the Top Damper Plus require a fusible fire safety link?

No, the US Fireplace Products Top Damper Plus does not require a fusible safety link. It ships fully assembled for uncomplicated rooftop installation. A stainless steel cable drops down the flue, allowing homeowners to operate the spring-loaded lid from the firebox bracket.

What materials are used in the Us Fireplace 13 X 18 Det1318 Energy Top Damper and Top Damper Plus?

US Fireplace Products constructs these dampers using high-grade stainless steel frames and cast-aluminum lids. This combination provides weather resistance against rain, rust, and seasonal downdrafts throughout 2026. The low-profile design also stops debris and animals from dropping down the chimney.

How does the dual-gasket system stop air loss?

Dual gaskets create an airtight barrier by compressing against two distinct sealing surfaces. The primary gasket sits inside the damper frame channel, while a secondary liquid gasket rests beneath the lid edge. This design prevents heated indoor air from escaping when the fireplace sits idle.