Ages 18-24? Explore Prime for Young Adults and see if you are eligible

Building a shared focal point between adjoining rooms brings an open, modern dynamic to your living space. Installing see through built in gas fireplaces lets you enjoy a clean flame presentation from two separate spaces, such as a living room and dining area or an indoor family room and covered patio. Careful planning makes all the difference because built-in units require precise rough framing, dedicated gas lines, and proper clearance to combustibles. Our editorial analysis examines manufacturer specifications, burner BTU capacities, and installation constraints to help you evaluate top models with confidence. Exploring multi-sided gas fireplaces highlights just how dramatic these double-sided flame presentations look when properly planned.

Venting pathways and fuel configurations dictate your installation options right from the start. Direct-vent systems route exhaust outside through dedicated pipes, while vent-free designs offer practical installation flexibility where exterior venting isn’t possible. Liquid propane and natural gas systems also operate on strictly separate fuel mechanics, meaning you can’t swap fuel sources without approved conversion hardware. Finding the right built-in see-through fireplace comes down to matching chassis dimensions, ignition reliability, and heat output to your home’s layout.

1
Best Seller

Empire Comfort Systems Boulevard 48-Inch

Empire Comfort Systems
9.8 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The Empire Comfort Systems Boulevard 48-inch see-through vent-free propane fireplace delivers 36,000 BTUs of supplemental warmth across two connecting spaces without exterior venting. It is an exceptional match for remodelers and homeowners seeking a modern double-sided focal point running on liquid propane.
Pros & Cons

Pros

  • Double-sided firebox provides simultaneous visual appeal and warmth to two separate rooms
  • Substantial 36,000 BTU supplemental heat output with no heat loss through a chimney or flue
  • Intermittent pilot saves propane over time and maintains operation during utility outages
  • Vent-free engineering offers broader framing flexibility in locations where venting cannot be routed

Cons

  • Configured strictly for liquid propane and requires verified gas line plumbing by a qualified technician
  • Decorative media, interior liners, and exterior trim packages are sold separately and required to complete the installation
  • Vent-free gas appliances are subject to regional building code restrictions and room-size limitations in certain jurisdictions
Detailed Review

The Empire Comfort Systems Boulevard 48-inch see-through vent-free fireplace is a contemporary linear gas hearth built for open-concept floor plans and shared interior walls. Engineered to provide an unobstructed view between two adjoining living areas, this double-sided unit acts as an architectural room divider while supplying substantial supplemental warmth. It is designed specifically for homeowners, remodelers, and builders with access to liquid propane who want the visual drama of a large linear fireplace without the structural hurdles of exterior vent pipe routing.

Equipped with a high-capacity burner, the unit is rated at 36,000 BTUs of supplemental heat output. Because it operates on a vent-free combustion platform, all generated heat remains inside the living envelope rather than venting outdoors, maximizing fuel-to-heat delivery. Operating this fireplace is managed by an intermittent pilot (IP) ignition system that saves fuel by avoiding the continuous gas consumption of a traditional standing pilot. The system also includes battery backup capability, ensuring the burner can be safely lit and operated during winter power outages.

In terms of construction, the Boulevard features a 48-inch linear firebox finished in durable black. The burner spans the interior to produce a broad, uniform flame presentation visible from either side of the wall. Empire Comfort Systems designs this model as a customizable foundation: decorative liners, exterior finishing trims, and top-surface media such as fire glass, reflective crushed glass, or decorative stones are sold separately. This modular approach allows buyers to match the interior finish to their specific room aesthetic rather than relying on a fixed factory appearance.

Installation requires careful planning around wall framing, clearances to combustibles, and dedicated liquid propane piping. Because no chimney, flue, or direct-vent pipe is necessary, the fireplace can be recessed into interior partition walls that would otherwise be impossible for a vented system. However, liquid propane requires correct supply line sizing and professional hookup. Buyers must also ensure adequate combustion air volume within the installation area as dictated by the appliance manual and local regulations.

A critical consideration before purchase is regulatory compliance. Vent-free gas appliances are strictly regulated, restricted, or prohibited in certain states, municipalities, airtight properties, and confined rooms such as bedrooms or bathrooms. Additionally, the base price covers only the bare chassis and burner, meaning buyers must factor in the additional cost of approved trim kits and decorative media to complete the final build.

For homeowners and designers with compatible layouts, compliant regional building codes, and a dedicated propane line, the Empire Boulevard 48-inch see-through fireplace provides a high-impact room transition. It combines reliable zone heating, modern linear aesthetics, and the convenience of battery-backed electronic ignition into a flexible vent-free platform.

Fuel & Venting

This model is engineered strictly for liquid propane (LP) fuel sources. Propane delivery systems require proper tank storage, regulators, and piping installed according to national and local fuel gas standards. Fuel switching between propane and natural gas should never be assumed possible without specific manufacturer-approved conversion hardware and certified labor.

Operating as a vent-free appliance, this fireplace discharges its combustion products directly into the room rather than using an exterior venting flue. While this provides near-total heating efficiency and wide placement flexibility, buyers must verify that vent-free gas appliances are permitted under local municipal codes and that the intended room meets minimum required volume thresholds.

Ignition & Controls

The Boulevard utilizes an Intermittent Pilot (IP) ignition system that only ignites the pilot flame when a call for heat is initiated. By eliminating the traditional standing pilot light, this system prevents continuous propane consumption during idle periods, saving money over months of regular use.

To safeguard against cold-weather utility outages, the electronic ignition includes battery backup functionality. This ensures homeowners can still ignite the burner and maintain supplemental zone heat during winter storms and severe electrical disruptions.

Customization & Media

The base unit includes the 48-inch double-sided steel chassis and the contemporary linear burner. Interior liner kits, perimeter decorative trims, and fireplace media are not bundled with the fireplace and must be ordered separately.

Owners can customize the visual presentation by choosing manufacturer-approved fire glass, crushed reflective glass, ceramic stones, and specialized interior liners. Always ensure that any chosen media is explicitly listed as compatible with the Empire Boulevard 48-inch series to maintain proper burner performance and safe combustion.

2
Editor's Pick

Empire Carol Rose 48-Inch Outdoor Linear

Empire Comfort Systems
9.8 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The Empire Carol Rose 48-Inch OLL48SP12SP is a heavy-duty stainless steel outdoor see-through propane fireplace delivering a powerful 55,000 BTU output alongside multicolor LED accent lighting. It is an ideal centerpiece for homeowners and landscape remodelers building a custom outdoor living space or dividing patio seating areas with two-sided flame visibility.
Pros & Cons

Pros

  • Striking see-through linear layout creates dual-sided visual ambiance between adjacent patio spaces
  • High 55,000 BTU propane burner output delivers noticeable outdoor supplemental heat
  • All-weather stainless steel construction with a concealed tilt-up control cover protecting components
  • Built-in multicolor LED accent lighting illuminates the burner pan independently or with fire

Cons

  • Decorative fire glass is not included and requires purchasing up to 20 pounds separately
  • Substantial weight of 198 pounds and built-in framing requirements demand careful site preparation
  • Configured specifically for propane gas; local outdoor codes and propane line clearances must be verified
Detailed Review

The White Mountain Hearth by Empire Carol Rose 48-inch outdoor linear see-through fireplace (model OLL48SP12SP) is a dedicated exterior propane hearth designed for open-air living areas. Featuring a dual-sided viewing window and a modern linear footprint, this unit suits homeowners, landscape designers, and outdoor remodelers looking to divide patio zones, poolside structures, or open pavilions while maintaining continuous sightlines and flame ambiance.

Heating performance centers around a robust 55,000 BTU propane burner engineered to cut through cool evening outdoor air. The unit pairs this thermal output with an integrated multicolor LED lighting system featuring red, blue, green, and white lighting modes that illuminate the burner bed. Because it is an outdoor vent-free appliance, the system releases its heat directly into the open surroundings without requiring a dedicated chimney stack or flue run, simplifying enclosure framing.

Construction focuses heavily on exterior durability, utilizing weather-resistant stainless steel throughout the exterior housing and burner pan. To safeguard the manual electronic ignition components and mechanical dials from moisture, dirt, and windblown debris, Empire incorporates a weather-shielded tilt-up cover that completely conceals the controls during everyday outdoor exposure.

At 51.75 inches wide, 24.31 inches high, 22.31 inches deep, and weighing 198 pounds, this fireplace represents a substantial structural addition to any outdoor kitchen island or masonry divider wall. Framing plans must account for these outer dimensions as well as manufacturer non-combustible clearances. The burner pan is designed to hold up to 20 pounds of decorative fire glass, which must be purchased separately before initial operation.

Buyers should account for several practical factors prior to ordering. The unit operates strictly on propane gas as configured, meaning buyers must arrange an adequate propane tank hookup and ensure compatibility with local outdoor fire codes. In addition, prospective buyers need to budget separately for the required 20 pounds of burner-approved fire glass, and recruit sufficient physical assistance to safely maneuver the nearly 200-pound stainless steel chassis into its framed structure.

For property owners seeking a high-output, dual-sided focal point to anchor an upscale outdoor living room, the Empire Carol Rose 48-inch see-through model delivers exterior materials, flexible LED visual effects, and serious heat output. Providing that proper outdoor clearances and propane fuel supply lines are planned in advance, it stands as a solid built-in investment for custom patio architecture.

Fuel & Venting

This Carol Rose linear fireplace is engineered exclusively for liquid propane operation, featuring a dedicated burner that produces up to 55,000 BTUs of heat output. The propane connection requires a dedicated exterior supply line or properly configured tank enclosure according to outdoor gas guidelines.

As an outdoor vent-free appliance, this model does not require an exterior flue, chimney, or specialized pipe run. However, it must be installed in an exterior location that complies with manufacturer outdoor clearance standards and local municipal fire codes governing open-air gas hearth appliances.

Fit & Dimensions

The exterior housing of the OLL48SP12SP measures 51.75 inches in width, 24.31 inches in height, and 22.31 inches in depth. These overall dimensions reflect the outer frame and do not represent the final rough opening, which must be built to the exact specifications provided in the manufacturer framing manual.

Weighing 198 pounds, the unit requires a sturdy structural foundation such as concrete, block, or properly reinforced non-combustible framing. Because it is a see-through design, framing must accommodate full access and viewing apertures on both front and rear facades.

Flame & Ambiance

Visual appeal is highlighted by an integrated multicolor LED lighting system capable of cycling through red, blue, green, and white hues. This under-bed illumination can accentuate the flames or provide nighttime patio lighting when relaxing outdoors.

The linear burner pan accommodates up to 20 pounds of decorative fire glass to distribute the flame and reflect the LED colors. Decorative glass media is not included with the fireplace and must be ordered separately prior to commissioning the burner.

3
Limited Time

Sierra Flame Palisade 36-Inch See-Thru Linear

Sierra Flame
9.8 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The Sierra Flame Palisade-36-LP is a 36-inch double-sided linear direct-vent gas fireplace running on liquid propane with electronic ignition. Featuring included fire glass, rock media, and a handheld remote, it is an excellent architectural choice for homeowners and remodelers looking to divide spaces with two-sided flame visibility.
Pros & Cons

Pros

  • See-thru linear design provides dual-room flame ambiance through two viewing sides
  • Direct-vent configuration exhausts outdoors for closed-combustion safety
  • Comes complete with remote control, fire glass, and a rock media set
  • Electronic ignition provides modern, dependable burner start-up
  • Clean-face aesthetic with black trim pairs cleanly with modern home designs

Cons

  • Requires professional direct-vent piping, gas line fitting, and dedicated wall framing
  • Configured strictly for liquid propane; natural gas users must verify conversion compatibility separately
  • BTU heating output and exact rough opening tolerances are omitted from specifications and require manual verification
Detailed Review

The Sierra Flame Palisade-36-LP is a 36-inch see-through linear direct-vent gas fireplace designed specifically for liquid propane (LP) fuel hookups. Featuring dual-sided viewing panels, this built-in model suits homeowners, remodelers, and custom home builders aiming to connect two adjoining spaces - such as a master suite and bathroom or an open living and dining area - with an eye-catching, shared linear flame presentation.

Operating on liquid propane, the Palisade fireplace utilizes electronic ignition for straightforward burner management without the continuous consumption of a standing pilot light. The included handheld remote control allows you to engage the fireplace conveniently from across the room. To complete the interior burner aesthetic, the package includes both decorative fire glass and a rock media set, letting you style the flame bed to match contemporary or transitional decor.

The unit features a clean-face black surround accented by tempered glass viewing panes on both sides. Weighing 105 pounds, the firebox is engineered with a compact 10.87-inch depth, 39.5-inch width, and 32-inch height. This shallow depth makes it practical when planning an interior dividing wall, where minimizing overall wall thickness is a major structural and design priority.

Because this is a direct-vent gas appliance, it requires approved direct-vent pipe routing to draw outside air for combustion while venting exhaust gases through an exterior wall or roof. Installation involves running a dedicated propane supply line, coordinating framing clearances, and providing electrical service for the electronic ignition system. Product dimensions must not be substituted for rough framing dimensions; always consult the manufacturer installation guide for framing cutouts and combustible clearances.

A critical consideration for prospective buyers is fuel specificity. The Palisade-36-LP is dedicated to liquid propane out of the box, meaning homes using natural gas would require verified conversion kits, which are not noted in the basic product specifications. Furthermore, specific BTU ratings and room heating square-footage guidelines are not listed in the summary data, so buyers should review technical submittal sheets to ensure the heat profile aligns with their space.

For homeowners and renovators looking for a contemporary double-sided propane fireplace, the Sierra Flame Palisade-36-LP delivers a striking two-way visual display. Its included media options, remote control, and clean-face styling make it a compelling choice for upscale dividing-wall projects, provided you plan for professional gas, electrical, and direct-vent installation.

Fuel & Venting

The Sierra Flame Palisade-36-LP is configured explicitly for liquid propane (LP). Natural gas hookups should not be used without confirming verified manufacturer conversion hardware and procedures. Ensure proper supply line sizing and tank pressure regulation prior to connection.

As a direct-vent gas appliance, this fireplace operates on a sealed combustion system. It pulls combustion air directly from the outdoors and expels combustion byproducts through dedicated venting pipe, avoiding indoor air depletion. Vent runs, elbow maximums, and termination clearances must be planned strictly according to the installation manual.

Installation & Dimensions

This linear see-thru model measures 10.87 inches deep by 39.5 inches wide by 32 inches high, with a total weight of 105 pounds. The relatively slim depth makes it well-suited for framing into double-sided interior partition walls or peninsula structures.

Do not use the exterior dimensions as your rough framing cutouts. Adequate clearance to combustible wall materials, non-combustible facing requirements around the tempered glass, and access for the electronic ignition system must all be verified before framing begins.

4
Top Rated

Majestic 48-Inch Linear See-Through Direct-Vent

Majestic
9.7 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The Majestic 48-Inch Linear See-Through Direct-Vent Gas Fireplace is a dual-sided architectural hearth designed to connect two rooms with ambient flames, interior LED lighting, and direct-vent efficiency. It is best suited for remodelers and homeowners seeking an expansive see-through centerpiece with customizable firebed media.
Pros & Cons

Pros

  • Dual-sided viewing design allows two adjacent rooms to share a single linear gas fireplace installation
  • Interior LED lighting enhances hearth aesthetics even during warmer seasons when flames are not needed
  • Includes two bronze clean-face trims for a cohesive look on both finished wall surfaces
  • Supports optional heat management systems to direct warmth into specific living areas

Cons

  • Requires professional framing, gas-line plumbing, and direct-vent exhaust routing through an exterior wall or roof
  • Decorative media accessories like driftwood logs and reflective black glass panels are sold separately
  • Specific fuel configuration, gas pressure requirements, and BTU ratings must be verified in the manufacturer manual prior to installation
Detailed Review

The Majestic 48-inch Linear See-Through Direct-Vent Gas Fireplace is a specialized built-in appliance designed to function as an open architectural room divider. By offering dual-sided visibility across a 48-inch viewing span, this fireplace allows homeowners to introduce the ambiance of a modern linear flame into two adjoining spaces simultaneously, such as a great room and dining area or a bedroom and sitting room.

Regarding heating and ambiance, this model combines direct-vent gas technology with interior LED accent lighting. The built-in LEDs illuminate the internal glass bed, providing a glowing decorative element regardless of whether the gas burner is active. For heat management, the unit supports optional heat distribution systems, which give homeowners the flexibility to direct warmth to adjacent living areas rather than trapping all heat in a single zone.

Construction quality focuses on a sleek linear firebox engineered for clean-face installation. The package includes two bronze clean-face trim kits, ensuring both sides of the wall opening present a coordinated, modern border. Inside the firebox, the design allows for personalized aesthetics, supporting optional reflective black glass interior panels, driftwood branch sets, natural stone accents, and alternative glass firebed media.

Installation requires comprehensive advance planning around structural wall framing, dedicated electrical connections, and gas line runs. Because this is a direct-vent appliance, it must be vented using approved direct-vent pipe routed to an exterior termination cap. The installation of gas lines, safety clearances, and electrical supply for the LED lights necessitates the work of a licensed gas technician and qualified hearth installer to comply with local building codes.

A realistic limitation is that this listing omits specific operational parameters such as exact BTU input ratings, burner orifice setups, and factory fuel configuration (natural gas versus liquid propane). Buyers must consult the official manufacturer documentation before purchasing to ensure fuel compatibility and confirm framing depth, non-combustible material clearances, and venting allowances.

For homeowners and remodelers designing a custom two-sided wall feature, the Majestic 48-inch Linear See-Through Direct-Vent Gas Fireplace provides a visually compelling focal point. It delivers versatile ambiance, contemporary clean-face trim styling, and optional heat redistribution capability when planned carefully with a qualified installation specialist.

Fuel & Venting

This fireplace utilizes a direct-vent architecture, which draws combustion air from outdoors through a sealed coaxial pipe system while venting exhaust gases safely outside. Direct venting helps maintain indoor air quality compared to vent-free designs, as the combustion chamber remains sealed behind protective glass.

Buyers must verify whether the unit is pre-configured for natural gas or liquid propane before ordering, as gas appliances require specific manifold pressures and burner orifices. Conversion kits, venting pipe runs, and exterior terminations must adhere strictly to the manufacturer specifications and local mechanical codes.

Flame & Ambiance

The linear format provides an expansive 48-inch horizontal view of the flame from two separate living areas at once. This see-through layout adds depth to interior architecture while maintaining an open, connected feel between adjacent rooms.

Interior LED lighting is integrated beneath the glass bed to illuminate the firebox independently of the gas flame. Homeowners can customize the aesthetic further by adding optional driftwood logs, tumbled natural stones, or reflective black glass panels to match their interior decor.

Installation & Trim

The inclusion of two bronze clean-face trims allows the fireplace to achieve a flush, contemporary finish on both sides of the partition wall. These trims frame the viewing area cleanly without the need for bulky traditional louvers or overlapping metal hoods.

Framing a see-through fireplace requires careful verification of wall thickness, framing stud placement, and non-combustible facing requirements around the perimeter of the opening. Because electrical wiring is required for the internal LEDs and optional heat routing kits, rough-in electrical work must be coordinated during framing.

5

Empire 60-Inch Outdoor Linear Natural Gas

Empire Comfort Systems
9.6 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The Empire 60-inch outdoor linear fireplace delivers 65,000 BTUs of natural gas heat paired with weather-resistant stainless steel construction and customizable multicolor LED accent lighting. It is best suited for homeowners and outdoor remodelers building a wide, modern patio focal point with an existing natural gas line.
Pros & Cons

Pros

  • High-output 65,000 BTU natural gas burner engineered specifically for exterior outdoor comfort
  • All-weather stainless steel construction helps resist outdoor corrosion and exposure
  • Multicolor LED accent lighting provides striking visual effects alongside live fire
  • Concealed tilt-up weather cover keeps the manual control panel protected from the elements

Cons

  • Substantial 253-pound weight requires planned framing support and multi-person handling during placement
  • Decorative fire glass is not included in the box and requires purchasing up to 20 pounds separately
  • Operates via manual ignition rather than a wall switch, timer, or handheld remote control
Detailed Review

The Empire 60-inch outdoor linear natural gas fireplace is a heavy-duty, modern exterior hearth unit designed for homeowners, remodelers, and landscape designers planning an open-air gathering space. Measuring over five feet in width, its clean horizontal profile serves as a prominent focal point for covered terraces, pool decks, and custom backyard kitchens connected to a residential natural gas line.

Heat generation and outdoor visual impact are central to this model, featuring a natural gas burner rated at 65,000 BTUs. This high thermal output helps push warmth into open patio zones where ambient air moves freely. Integrated multicolor LED lighting surrounds the burner base, giving users the flexibility to enhance the flame bed with dynamic, vivid colors during evening gatherings.

Exterior durability is supported by full stainless steel construction, which offers resilience against rust, moisture, and temperature fluctuations across different seasons. To keep the burner mechanisms and ignition hardware clean, Empire equips the unit with a weather-shielding tilt-up cover that completely conceals the control compartment when not actively being adjusted.

Planning the installation requires accounting for substantial physical dimensions: 63.75 inches in width, 19.13 inches in depth, and 30.88 inches in height. At 253 pounds, the firebox calls for solid structural framing and multiple people for safe placement. The burner pan requires up to 20 pounds of approved fire glass media to properly disperse flames and reflect the multicolor LEDs, which must be sourced separately.

Because the unit uses a manual ignition system and is configured specifically for natural gas, buyers should verify their outdoor fuel line supply, proper clearance to combustibles, and local exterior ventilation codes prior to framing. It does not include remote control functionality or electronic automation, which keeps operation simple but strictly manual.

For homeowners looking to anchor an outdoor living area with an eye-catching, high-output linear fire feature, this Empire 60-inch model offers dependable stainless steel construction, striking supplemental LED lighting, and substantial natural gas heat output.

Fuel & Media Details

This linear outdoor fireplace is engineered exclusively for natural gas hookups and produces up to 65,000 BTUs of heat. Fuel conversion kits or liquid propane provisions are not documented in the base specifications, making pre-installation verification of your gas line essential.

The wide burner tray requires up to 20 pounds of outdoor-rated fire glass to achieve proper flame dispersion and visual depth. Fire glass is not supplied in the carton and must be purchased separately before running the burner.

Dimensions & Build

Exterior chassis dimensions measure 63.75 inches in width, 19.13 inches in depth, and 30.88 inches in height. These dimensions require an adequately sized custom enclosure, outdoor kitchen island, or masonry surround.

The complete assembly weighs 253 pounds and features heavy-gauge stainless steel construction, providing long-term structural integrity and stability in outdoor residential installations.

6

Sierra Flame 48-Inch See-Through Direct Vent Gas

Sierra Flame
9.6 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The Sierra Flame 48-inch See-Through Direct Vent Gas Fireplace is a dual-sided liquid propane firebox designed to deliver two-room flame visibility with a clean-face aesthetic. It suits homeowners and remodelers building an architectural divider who want convenient electronic ignition and digital remote operation.
Pros & Cons

Pros

  • Two-sided see-through glass creates a dramatic focal point connecting two spaces
  • Packaged with essential accessories including fire glass and a deluxe digital remote
  • Clean-face framing provides a modern, uncluttered built-in look
  • Borosilicate glass offers dependable heat resistance across both viewing panes
  • Electronic ignition eliminates the need for a continuous standing pilot flame

Cons

  • Configured specifically for liquid propane; buyers needing natural gas must verify conversion kit options separately
  • Requires professional gas-line routing, direct-vent piping, and precise framing due to the 150-pound weight
  • BTU rating and specific heating area are not stated in product specifications and should be verified in the installation manual
Detailed Review

The Sierra Flame 48-inch See-Through Direct Vent Gas Fireplace is a premium dual-sided architectural appliance built for homeowners and remodelers looking to connect two rooms with a single fire feature. By offering a transparent view straight through the firebox, this fireplace functions well in dividing walls between living rooms, dining rooms, primary suites, or expansive open-concept great rooms. Operating on liquid propane, it delivers targeted ambiance for homes running on dedicated LP tank systems.

Visual presentation is the primary highlight of this 48-inch model. The see-through configuration opens visual sightlines across living zones, while the included fire glass media scatters flame reflections across the burner bed. Startup is managed through an electronic ignition system, providing fast lighting without requiring a wasteful continuous pilot flame. The included deluxe digital remote control gives you immediate handheld command over the unit without having to access concealed controls inside the firebox opening.

In terms of construction, Sierra Flame outfits this unit with a black clean-face surround designed to blend cleanly into finished drywall, tile, or stone surrounds. Both viewing sides are fitted with borosilicate glass, an engineered glass composition known for high thermal shock resistance under sustained gas combustion heat. With an overall product weight of 150 pounds, the fireplace features a robust structural chassis that requires sturdy framing support during installation.

Planning the installation requires careful attention to fuel supply, venting, and clearances. Because this is a direct-vent gas unit, it draws outside air for combustion and expels exhaust outdoors through approved venting pipe, preserving indoor air quality. It is built strictly for liquid propane, so buyers must have an adequate LP supply line ready at the framing location. As with any built-in gas appliance, professional installation by a licensed gas technician is strongly advised to verify gas pressure, venting runs, and combustible clearance parameters.

While the design offers high visual impact, buyers should verify a few missing specifications before purchase. The manufacturer does not list the specific BTU output or estimated heating square footage in the core product data, meaning you should consult the manufacturer manual if whole-room thermal performance is a primary buying factor. Additionally, anyone seeking to use natural gas will need to verify if an approved conversion kit exists, as this SKU is designated for liquid propane only.

For homeowners and builders seeking a modern, two-sided focal point that elevates an interior partition wall, the Sierra Flame 48-Inch See-Through Direct Vent Fireplace stands out as a high-end option. Its combination of clean-face framing, included fire glass, borosilicate viewing panels, and digital handheld control makes it a standout architectural centerpiece for liquid propane homes.

Fuel & Venting

This Sierra Flame 48-inch fireplace is configured specifically for liquid propane (LP) fuel. Propane and natural gas operate at different manifold pressures and orifice sizes, so this unit should only be connected to an approved liquid propane supply line. If you require natural gas operation, verify whether an official manufacturer-approved conversion kit is available before purchasing.

As a direct-vent appliance, the unit uses a sealed combustion system. It pulls outdoor air into the firebox for burning and vents exhaust gases directly outside through specialized coaxial or colinear venting components. Direct-vent systems must follow strict manufacturer guidelines regarding vertical rise, horizontal run limitations, and exterior termination clearances.

Installation Considerations

Weighing 150 pounds and spanning a nominal 48 inches, this see-through fireplace requires thorough framing and structural planning. The rough opening must account for the dual-sided depth and combustible clearance minimums outlined in the manufacturer instruction manual.

Because installation involves structural partition framing, high-pressure gas plumbing, electrical connections for the electronic ignition, and exterior venting penetrations, all hookups should be performed by qualified gas fitters or certified fireplace installers in accordance with local building codes.

7

Sierra Flame Palisade 36-Inch Direct Vent Natural

Sierra Flame
9.4 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The Sierra Flame Palisade 36-inch See-Thru Fireplace is a direct-vent natural gas linear unit designed to showcase an open flame between two adjoining rooms. Equipped with electronic ignition, included fire glass, rocks, and a remote control, it best suits remodelers and homeowners looking to build an architectural double-sided feature wall.
Pros & Cons

Pros

  • Double-sided see-through configuration enhances two living spaces with one fireplace
  • Bundled with both fire glass and stone rock media alongside a wireless remote control
  • Clean-face aesthetic with tempered glass fits seamlessly into contemporary drywall or tile surrounds
  • Electronic ignition simplifies day-to-day operation

Cons

  • Requires professional natural gas plumbing and dedicated direct-vent pipe routing
  • Manufacturer specifications do not list explicit BTU ratings or heating square footage guidance
  • Double-sided installation demands precise wall depth and structural framing planning
Detailed Review

The Sierra Flame Palisade 36-inch See-Thru Direct Vent Linear Fireplace is a built-in natural gas hearth appliance engineered to sit inside an interior partition wall. By featuring dual-sided tempered glass viewports, this unit is best suited for homeowners, remodelers, and custom home designers aiming to connect two adjoining living areas, such as a living room and dining room or a bedroom and sitting room, with a shared architectural hearth.

Powered specifically by natural gas, this linear fireplace relies on a direct-vent system to draw combustion air from outside while safely venting exhaust gases outdoors. Ignition is controlled through an electronic ignition assembly, eliminating the constant gas consumption of an older standing pilot. While the manufacturer does not supply specific BTU heat ratings or square-foot heating estimates in this listing, the direct-vent linear burner provides focused ambiance and flame warmth across both viewing faces.

Construction quality centers around a 105-pound black steel chassis with a clean-face surround. This border design minimizes visible sheet metal trim, directing visual attention straight onto the linear flame and decorative interior bed. To help tailor the hearth to your interior decor, Sierra Flame packages the fireplace with both contemporary fire glass and a natural rock media set.

Regarding dimensions and installation, the Palisade measures 10.87 inches deep, 39.5 inches wide, and 32 inches high. Installing a see-thru direct-vent fireplace requires exact framing cutouts to account for both finished wall surfaces, properly sloped venting pipes, and a plumbed natural gas line. Day-to-day operation remains effortless thanks to the included handheld remote control, allowing users to start and manage the fireplace from the couch.

Buyers should verify several logistical details before ordering. The product data does not specify rough framing dimensions, BTU output limits, or whether a liquid propane conversion kit is supported. Because gas line sizing, combustible clearances, and venting lengths are dictated by manufacturer manuals and local building codes, planning the installation with a certified gas professional is essential.

For homeowners planning an open-concept partition wall, the Sierra Flame Palisade 36 provides an eye-catching focal point. Its included media options, modern clean-face look, and remote convenience make it a solid choice for dual-room ambiance.

Fuel & Venting

The Sierra Flame Palisade operates exclusively on natural gas as listed. It is not configured for liquid propane in this specification, so buyers must verify whether official conversion kits exist if propane is their primary fuel source.

Because this is a direct-vent fireplace, it utilizes a sealed combustion chamber. Direct-vent pipes must be routed through an exterior wall or roof following manufacturer draft and clearance guidelines, maintaining indoor air quality by isolating combustion gases from the room.

Fit & Dimensions

The exterior product dimensions measure 10.87 inches deep, 39.5 inches wide, and 32 inches high, with a total unit weight of 105 pounds.

Because these numbers represent the fireplace body rather than the rough framing opening, remodelers must consult the official Sierra Flame framing manual to confirm required stud spacing, header heights, and non-combustible finishing clearances for both wall sides.

Frequently Asked Questions About See Through Built In Gas Fireplaces

What is the difference between direct-vent and vent-free see through built in gas fireplaces?

Direct-vent units route exhaust outdoors through dedicated sealed piping, while vent-free models burn gas cleanly enough to operate without an exterior chimney or vent. Direct-vent setups, similar to traditional direct vent gas fireplace units, completely isolate indoor air behind sealed glass. Vent-free models offer more placement flexibility, but local municipal codes may restrict their installation in specific jurisdictions.

Can a see through built in gas fireplaces model run on both natural gas and propane?

No, gas fireplaces are engineered for one specific fuel type at the factory and cannot switch fuels without an approved conversion kit. Linear models come in dedicated liquid propane or natural gas configurations with factory-matched orifices and valves. Running propane through a natural gas valve creates severe sooting and combustion hazards. Always verify your home’s fuel supply before ordering a unit.

How much heat do see-through built-in gas fireplaces produce?

Listed heat output generally ranges from 36,000 BTU for indoor units up to 65,000 BTU for heavy-duty outdoor linear models. Because these fireplaces radiate warmth into two rooms at once, heat distributes across a wider footprint than single-sided models. These units provide supplemental zone warmth rather than whole-home central heat.

Do see-through gas fireplaces require electricity to operate?

Most modern units require a 120-volt electrical circuit to power electronic intermittent pilot ignition systems, remotes, and accent lights. Intermittent pilot systems save energy by eliminating a continuous standing pilot flame, and many include battery backups for power outages. Basic manual ignition outdoor burners can operate without power, but optional LED lights still need electricity.

Can you add custom trim or fire glass to a see through built in gas fireplaces?

Yes, but you must only use decorative media and accessories certified by the manufacturer for your exact firebox. Using unapproved media or mismatched fireplace trim kits can obstruct burner ports and create carbon buildup. Many models include factory-approved fire glass and rock kits to ensure safe draft and flame performance.