Recessed wall framing and cutout dimensions present real challenges during a hearth renovation. Homeowners evaluating a napoleon elevation 36 built in electric fireplace setup often seek the architectural depth of traditional masonry without chimney flues or gas hookups. Reviewing published specifications helps confirm whether a 36-inch firebox fits your wall depth and electrical wiring. Many renovators weigh modern linear units against traditional electric fireboxes to create a flush, built-in centerpiece that complements surrounding cabinets.
Supplemental heating capacity is another key consideration, with standard 120-volt models delivering 4,400 to 5,000 BTUs via a 1,500-watt heating element. Running flame effects independently lets you enjoy the ambiance in warm seasons without producing unwanted heat. Pairing your unit with compatible electric fireplace insert accessories further personalizes the ember display. Verifying required clearances and electrical circuits before starting ensures a safe, trouble-free installation.
Pros
- Front heat discharge requires only 8 inches of clearance below a wall-mounted TV or mantel
- Smart connectivity enables hands-free voice commands through Alexa or Google Home and app operation
- Flexible mounting options include in-wall recessed framing, surface wall hanging, or existing fireplace openings
- Dual media package includes both faux wood logs and glass crystals for custom aesthetic styling
- Independent flame operation provides full visual ambiance without turning on the heating element
Cons
- Pulls up to 12 amps at peak operation, which may require a dedicated 15-amp or 20-amp circuit
- Designed strictly for supplemental zone warmth and cannot serve as a home primary heat source
- Wireless IR remote control requires AAA batteries that are not included in the box
The Touchstone Sideline 36 is an electric fireplace engineered for recessed in-wall installation, direct wall mounting, or placement within an existing masonry or zero-clearance fireplace opening. Measuring 36 inches wide, 21.4 inches high, and 5.5 inches deep, it best suits homeowners, apartment residents with allowable modifications, and remodelers designing custom media walls. Its ventless configuration eliminates the need for gas lines or chimney venting, offering a practical way to add an electric hearth to standard living rooms, family rooms, or master suites.
Heating performance centers on a 1,500-watt heating element paired with an integrated thermostat, designed to help take the edge off cool rooms or finished basements. Because the heating vent faces forward from the upper fascia, warm air projects outward into the living space rather than upward toward the wall. This specific airflow design allows the fireplace to be positioned safely with as little as 8 inches of clearance below a flat-screen television, artwork, or mantel shelf. For warmer months, the heater can be shut off entirely to run the visual flame effects on their own.
Visual customization and build quality are key highlights of the Sideline 36 firebox. The heavy-gauge chassis weighs 38 pounds and is bordered by a minimalist black front frame. Inside, Touchstone provides 30 distinct flame and ember color combinations paired with five flame intensity settings that range from a soft glow to a vivid blaze. The unit ships with both a molded faux-wood log set and contemporary glass crystals, giving buyers the freedom to install either media set or combine both for a layered aesthetic.
Electrical configuration and setup offer valuable flexibility during installation. The fireplace comes equipped with a 6-foot power cord configured for standard 110-120V household outlets, while the chassis is also prepared for hardwiring directly inside the wall cavity. Drawing a maximum of 12 amps, the fireplace can operate on a standard 15-amp branch circuit, though a 20-amp circuit is recommended if other electronics share that electrical run. Control options include a multi-function IR remote, a smart mobile app, and voice control compatibility through Alexa and Google Home devices.
Buyers should keep a few practical limitations in mind before beginning an installation project. Touchstone explicitly notes that this fireplace provides supplemental heat and will not replace a primary central heating system. Furthermore, while overall chassis dimensions are clearly stated, buyers must measure their framing depth, height, and width carefully prior to cutting drywall, as rough framing requirements differ slightly from total exterior trim dimensions. Additionally, the wireless remote control requires standard AAA batteries, which are not provided in the package.
For homeowners and remodelers looking to build a clean media feature wall, the Touchstone Sideline 36 offers an excellent blend of smart controls, versatile mounting options, and strong visual appeal. Its front-venting clearance advantages and dual-media hearth options make it a dependable, practical choice for adding ambiance and supplemental warmth to any contemporary living space.
Installing the Touchstone Sideline 36 can be completed as a fully recessed in-wall build or as a surface wall mount using the included bracket. The metal chassis can be secured directly to standard wall framing studs, and the sides and back of the housing remain cool to the touch while the heater operates. It can also be retrofitted into existing fireplace openings, provided any legacy gas lines or vents are properly decommissioned by a professional.
A major design advantage is the 8-inch minimum clearance requirement between the top of the fireplace and a flat-screen TV, mantel, or ceiling. Because the 1,500W heater expels air through front-facing vents, rising heat bypasses the wall surface directly above the firebox. Homeowners must verify rough cutout measurements against their wall framing before cutting to ensure a flush, secure fit.
The Touchstone Sideline 36 operates on a standard 110-120V electrical supply and draws a maximum of 12 amps during full heating operation. It ships with a 6-foot grounded power cord for standard wall outlets and features integrated wiring preparation for direct in-wall hardwiring.
Due to its 12-amp maximum draw, the unit can be used on a standard 15-amp circuit, though a 20-amp circuit may be necessary if other high-draw electronics or lighting share the same line. The 1,500W supplemental heater includes an adjustable thermostat to maintain comfortable room temperatures, but it is engineered to take the chill off living areas rather than act as a whole-house heat source.
Operation of the Sideline 36 is highly versatile, featuring Wi-Fi connectivity that pairs with smart home platforms including Amazon Alexa, Google Home, and dedicated mobile apps. Users can adjust flame settings, set the shut-off timer, and modify the thermostat from across the room using voice commands or a smartphone. An infrared remote control is also included for standard handheld adjustments, requiring user-supplied AAA batteries.
Aesthetic customization includes 30 distinct ember color and flame combinations with five brightness levels. The fireplace comes complete with both traditional faux logs and modern glass crystals, allowing users to choose an authentic wood-hearth style, a modern reflective bed, or a hybrid blend of both media formats.
Pros
- Supplies 4,400 BTUs of supplemental heat covering up to 400 square feet for targeted zone warming
- Independent flame-only mode provides fireplace ambiance without generating heat during warmer months
- Offers broad temperature customization with an integrated 60°F to 90°F thermostat and five flame brightness levels
- Dual control options include a multifunctional remote and a wall-mounted thermostat
Cons
- At 67 pounds, positioning and securing the built-in unit into framing typically requires two people
- Rough opening and framing cutout dimensions are not listed in the summary specifications and must be verified in the manual
- Exact operational wattage and circuit draw details should be verified before connecting to shared electrical circuits
The ClassicFlame 36-Inch Traditional Built-In Electric Fireplace Insert is an architectural hearth solution created for homeowners, remodelers, and property builders who want the visual charm of a classic firebox without the venting, gas lines, or masonry work of conventional fireplaces. Finished in black, this 120-volt unit is specifically designed for permanent built-in installation into framed walls, custom cabinetry, or dedicated mantel surrounds.
For supplemental zone heating, the insert provides 4,400 BTUs of warmth, which the manufacturer rates for areas up to 400 square feet. Climate management is handled by an adjustable thermostat capable of regulating room settings from 60°F to 90°F, operated via the included multifunctional remote control or a wall-mounted thermostat. When additional warmth is not needed, the traditional rolling flame effect operates entirely independently from the heater across five selectable brightness levels, enabling year-round decorative use.
The unit features a substantial build, weighing 67 pounds with outer dimensions measuring 36 inches wide, 7.62 inches deep, and 24 inches high. Its 7.62-inch depth requires an adequately framed wall cavity or deep enclosure to achieve a flush, professional finish. The neutral black trim provides a classic aesthetic that integrates smoothly with stone veneers, shiplap, tile surrounds, or painted drywall.
Installation involves preparing a recessed opening to house the chassis and routing an appropriate 120-volt electrical supply. Because this is a recessed insert, routine maintenance is notably simpler than with wood or gas units, eliminating tasks like ash removal, chimney cleaning, and pilot maintenance. General upkeep centers primarily on keeping the exterior glass clean and ensuring air intake and heat discharge louvers remain free of household dust.
A practical limitation to consider is that the outer product measurements (36 x 7.62 x 24 inches) do not represent the rough framing cutout dimensions. Builders and homeowners must verify the exact rough opening requirements in the product manual before cutting studs or building an enclosure. Furthermore, because specific running wattage is not itemized in the primary data, verifying circuit loads is recommended when adding this heater to an existing household circuit.
This ClassicFlame 36-inch built-in electric insert is a dependable choice for anyone completing a living room remodel, media wall, or custom hearth build. Its combination of 4,400 BTU supplemental zone heat, broad thermostat adjustments, dual control formats, and flame-only operation makes it a versatile, low-maintenance centerpiece for everyday home comfort.
The exterior dimensions of the ClassicFlame insert measure 36 inches wide, 7.62 inches deep, and 24 inches high. With an overall weight of 67 pounds, the unit requires adequate structural framing and careful handling during recessed placement.
Because outer product dimensions do not account for clearance tolerances or mounting flange overlaps, rough opening dimensions must be confirmed against the manufacturer installation manual prior to framing wall cavities or cabinetry enclosures.
Heating is delivered via a 4,400 BTU heater rated for supplemental zone coverage up to 400 square feet. This helps warm primary living spaces directly without needing to raise the central thermostat for the entire house.
Temperature settings range from 60°F to 90°F via a wall-mounted thermostat and a multifunctional handheld remote. Visual settings include five flame brightness levels, and the flame effect functions with or without heat for continuous seasonal use.
Pros
- Includes both burnt oak logs and glass crystals for tailored traditional or modern hearth aesthetics
- Features dual heat settings including energy-saving Eco mode and high-output Boost mode with enhanced blower circulation
- Self-trimming flange simplifies recessed wall framing and existing fireplace cavity retrofits
- Rich visual customization with 3 flame color choices and 7 ember bed illumination shades
Cons
- Exact wattage, BTU rating, and square-footage heating coverage are not specified in the product data and must be verified in the manual
- Built-in depth of 7.75 inches requires adequate wall framing clearance or sufficient existing firebox depth
- Optional 3-piece or 4-piece trim kits for larger existing openings are sold separately
The Napoleon Cineview 30 (model NEFB30H) is a 30-inch built-in electric fireplace designed to serve either as an insert for existing fireplace openings or as a recessed unit in newly constructed walls. Sized at 30 inches wide, 20.25 inches tall, and 7.75 inches deep, this unit suits homeowners, remodelers, and apartment residents seeking supplemental zone warmth and ambient flame visuals without the soot, ash, or venting demands of wood or gas appliances.
Visual customization is a central highlight of the Cineview 30, which includes both crystal glass media and burnt oak logs in the box. Users can choose between a contemporary crystal ember look or a traditional log set aesthetic to complement living room or media wall decor. The display offers 3 distinct flame colors along with 7 ember bed color options, allowing for varied moods across different seasons.
For supplemental temperature control, the unit features dedicated Boost and Eco heating modes paired with an integrated blower. Boost mode engages maximum heat output alongside elevated blower speed to deliver swift warmth to the immediate living space, while Eco mode operates at half heat to conserve electricity. Because precise electrical draw and BTU ratings are not explicitly listed in the base specifications, buyers planning supplemental heating for specific room sizes should verify electrical requirements and circuit capacity with the manufacturer documentation.
Built with a sturdy chassis weighing 41.9 pounds and finished with a clean black glass front, the unit is engineered for sleek integration. The integrated self-trimming flange covers rough edges against wall materials or surrounding masonry openings. For retrofitting into oversized existing fireplace cavities, Napoleon supports optional 3-piece and 4-piece trim kits that provide a clean, finished appearance.
Potential buyers should consider the 7.75-inch overall depth requirement, which necessitates adequate framing clearance in newly constructed partition walls or sufficient depth within an existing firebox. In addition, trim kits for wider openings are optional accessories rather than standard inclusions, so opening dimensions should be measured carefully prior to installation.
Overall, the Napoleon Cineview 30 (NEFB30H) is a versatile, visually refined electric fireplace insert that combines modern flame customization with practical two-stage heating. It represents a solid investment for homeowners and renovators seeking a clean, vent-free focal point for family rooms, bedrooms, or media suites where flexible styling and straightforward operation are priorities.
The Napoleon Cineview 30 measures exactly 30 inches wide, 20.25 inches tall, and 7.75 inches deep, with a total product weight of 41.9 pounds.
Its self-trimming flange design helps create a flush perimeter against drywall, shiplap, tile, or masonry openings without requiring intricate custom finishing.
For installations inside larger existing masonry fireplace cavities, Napoleon offers optional 3-piece and 4-piece trim kits to conceal gaps and achieve a seamless fit.
The Cineview 30 provides comprehensive visual flexibility by including both burnt oak logs and glass crystal ember media inside the box.
Users can select from 3 distinct flame colors and 7 ember bed illumination hues, making it easy to coordinate lighting with seasonal decor or room ambiance.
The unit features a full black glass front that enhances flame contrast and provides a clean, contemporary aesthetic in any living space.
This electric fireplace features a multi-mode heater with an integrated blower to assist in distributing supplemental warmth.
Boost mode engages full heat output alongside increased blower speed for rapid heating, while Eco mode operates at half heat to reduce energy consumption.
Because exact wattage, BTU metrics, and electrical connection specifications are not detailed in the standard product data, buyers should verify electrical circuit and voltage requirements in the installation manual.
Pros
- Broad 42-inch firebox width provides an attractive, prominent viewing area for large walls
- Solid 107-pound construction provides a sturdy, rigid built-in housing for permanent framing
- Electric configuration bypasses complex gas piping, venting pipes, and chimney masonry work
- Flush-mount built-in profile integrates cleanly into tile, stone, shiplap, or custom millwork surrounds
Cons
- Substantial 107-pound unit weight requires adequate wall framing support and two-person handling during placement
- Manufacturer rough framing dimensions, electrical requirements, and heating ratings are not provided in the basic data and must be verified in the manual
- Permanent recessed design requires opening wall cavities and is not suitable for portable or surface-mount applications
The Napoleon Element 42-inch built-in electric fireplace (model NEFB42H-BS) is an architectural electric firebox engineered for permanent wall installations. Designed specifically for built-in placement rather than surface wall-hanging or freestanding use, this wide-format unit suits homeowners, general contractors, and remodelers creating a dedicated focal point in living rooms, primary suites, or finished basements. Its flush profile allows seamless integration into custom surrounds such as drywall, stone, tile, or built-in entertainment cabinetry.
Because this model operates on electric power, it eliminates the structural constraints associated with gas supply lines, venting pipes, and chimney draft requirements. This provides great flexibility for single-family residences, condominiums, or townhomes where venting through exterior walls or roofs is impractical. While electric fireplaces typically provide supplemental zone heating alongside decorative flame visuals, specific BTU ratings, heating element wattage, and fan airflow details for model NEFB42H-BS are not detailed in the primary product data and should be verified directly against the manufacturer documentation.
Build quality is highlighted by the unit's substantial 107-pound weight, which points to a heavy-gauge steel housing rather than the lightweight, thin sheet metal common in entry-level appliances. Napoleon designed this Element series unit as a rigid, durable firebox meant to sit securely within a framed recess. The 42-inch viewing profile establishes a traditional hearth proportion that can comfortably anchor large feature walls or balance wall-mounted media setups when appropriate clearances are observed.
Installation and setup require thoughtful pre-construction planning. Moving and positioning a 107-pound steel chassis necessitates two capable adults to prevent damage or injury. Before beginning framing or ordering materials, buyers must review the official Napoleon installation manual to obtain exact rough-opening width, height, and depth requirements, as well as required clearances to combustible materials. In addition, an electrician should verify whether the unit utilizes standard 120-volt service or a dedicated circuit, along with whether it requires direct hardwiring or an approved receptacle inside the framing cavity.
A realistic limitation of this unit relates to information gaps in the basic listing. Crucial operational details such as included control remotes, thermostat adjustments, flame color selections, blower noise levels, and decorative log or crystal media beds are not stated in the raw specifications. Furthermore, because this is an architectural built-in firebox, it cannot simply be hung on a wall bracket or relocated easily, making it poorly suited for rental properties or temporary living situations.
For remodelers and homeowners planning a permanent architectural upgrade, the Napoleon Element NEFB42H-BS provides a robust, professional-grade electric hearth framework. The ideal purchase path involves downloading the official installation guide first, confirming electrical rough-in and wall cavity framing specs with your installer, and using this solid 42-inch chassis as the centerpiece for your custom fireplace build.
Installing the Napoleon Element 42-inch built-in electric fireplace requires framing a dedicated rough opening in your wall or custom enclosure. Because overall product dimensions do not automatically match required framing dimensions, you must consult the official manufacturer installation manual for exact cutout width, height, and recess depth before cutting studs.
With a total weight of 107 pounds, the unit requires structurally sound framing support along the bottom sill plate. Plan to have at least two people on hand during lifting, positioning, and fastening to ensure safe handling and prevent cabinet distortion.
Prior to completing drywall or cabinetry work, consult the manufacturer specification sheet to confirm the required electrical supply for model NEFB42H-BS. Built-in electric fireplaces typically require dedicated circuit planning to support heating elements safely without tripping breakers.
Verify whether this model uses a grounded 120-volt plug-in connection or requires direct hardwiring into a junction box. Any wiring should comply with local electrical codes and be handled by a qualified professional when required.
Pros
- Integrated crackling sound speaker adds auditory realism missing from most standard electric inserts
- Selectable 750W and 1500W heat modes provide flexible supplemental heating options
- Sleep mode allows heating operation while turning visual display lights completely off
- Clear separation between overall flange dimensions and insert chassis dimensions simplifies framing planning
- Two-sided faux brick interior adds visual depth behind the tempered glass front
Cons
- Manufacturer does not state specific square-footage heating area or BTU ratings
- At roughly 8.84 inches deep and 55.56 pounds, it requires a relatively deep framing cavity and solid structural support
- Specific outlet, voltage, and circuit requirements are omitted from listed data and must be verified in the manual
The Benrocks 36-inch electric fireplace insert is a built-in supplemental heating and decorative hearth unit designed for recessed wall installations, entertainment centers, custom fireplace mantels, and bookshelf surrounds. It best suits homeowners, DIY remodelers, and media-console builders who want to replace an old hearth opening or build a modern living-room feature wall. By combining visual LED flames with built-in crackling audio and a classic two-sided interior brick pattern, this insert bridges the gap between traditional fireplace ambiance and modern electric convenience.
Heating performance relies on two distinct output levels: a 750-watt low setting and a 1500-watt high setting. While the manufacturer does not publish exact BTU ratings or square-footage coverage estimates, these wattages are standard for supplemental residential zone heating. The visual system operates with energy-saving LEDs that simulate glowing logs and dynamic flames across 5 brightness levels and adjustable flame speeds. You also get 3 selectable top light colors to shift the interior mood, alongside a practical sleep mode that keeps the heater running while extinguishing all display lighting for comfortable nighttime use.
Build quality centers around a black metal enclosure paired with a smooth tempered glass face panel. Inside the firebox, two-sided brick-patterned side walls provide textural depth that mimics traditional masonry construction. Weighing 55.56 pounds, the chassis feels sturdy and stays firmly seated once anchored into a framed opening. Controls are straightforward and accessible, offering both a discreet front touch screen and a multi-function wireless remote to manage power, heating levels, flame aesthetics, and the 1 to 9-hour automated shutoff timer.
Installation planning requires attention to two distinct sets of dimensions provided by the manufacturer. The exterior overall dimensions measure 35.63 inches wide, 8.84 inches deep, and 27.32 inches high, which include the front trim flange that overlaps your finished wall or cabinet face. The recessed insert section measures 32.23 inches wide, 7.70 inches deep, and 26.02 inches high. You will need a framing cavity that comfortably accommodates the 7.70-inch insert depth while providing adequate clearance for heat dissipation and electrical routing. Basic maintenance involves keeping the front glass clean and gently dusting the air intake and exhaust vents according to manual instructions.
The primary limitations involve missing electrical and room-size specifics in the raw product specifications. Because the manufacturer does not list exact voltage requirements, dedicated circuit specifications, or square-foot heating estimates, buyers should consult the included operating manual before finalizing electrical rough-ins. As with any supplemental electric heater, this unit is intended for supplemental zone warmth rather than replacing a primary household furnace.
For homeowners and remodelers looking for an electric insert with auditory crackling effects, traditional brick firebox aesthetics, and versatile dual heat output, this Benrocks unit offers a solid balance of features. As long as your framing space can accommodate an 8-inch cavity depth, it provides an attractive, low-maintenance centerpiece for living rooms and custom entertainment centers.
Careful measurement of your wall cutout or cabinet opening is essential before installing the Benrocks 36-inch fireplace insert. The product features an overall exterior measurement of 35.63 inches wide by 8.84 inches deep by 27.32 inches high, which represents the outermost front perimeter including the glass panel face.
The actual insert body designed to slide into your rough opening measures 32.23 inches wide by 7.70 inches deep by 26.02 inches high. Make sure your framing cavity provides enough internal depth to seat the nearly 8-inch-deep firebox flush against the finished wall. Weighing 55.56 pounds, the unit requires framing capable of supporting moderate weight, whether mounted in a drywall stud wall, media console, or existing masonry opening.
The Benrocks insert provides visual and acoustic customization to suit different times of day and room environments. Visual effects are powered by energy-efficient LEDs that project realistic flame motions and glowing ember log bed aesthetics without creating smoke or ash.
Users can tailor the display with 5 distinct flame brightness levels, adjustable flame speeds, and 3 top light color variations. A built-in internal speaker produces a simulated wood-crackling sound to complete the sensory atmosphere. For bedroom or evening media use, the sleep mode turns off all flame and overhead lights while allowing the heating element to continue warming the room.
The heating system features dual power modes, offering 750 watts on low and 1500 watts on high for tailored supplemental zone heating. An adjustable timer can be set between 1 and 9 hours to automate shutoff and avoid unnecessary power consumption.
For operational safety, the insert includes a built-in overheating protection system that automatically cuts power to the heating elements if internal temperatures exceed safe thresholds. Because specific circuit amperage and voltage ratings are not provided in the raw product data, always verify electrical supply compatibility in the manufacturer operating manual prior to installation.
Pros
- Offers two distinct installation options: straightforward surface wall hanging or seamless flush recessed mounting
- 5,000 BTU (1,500W) heating element provides capable supplemental zone heat for spaces up to 400 square feet
- Clean, nearly frameless black glass trim highlights the vibrant multi-color flames and crystal ember bed
- Comes complete with mounting bracket and dedicated remote control right out of the box
Cons
- Precise rough-opening framing dimensions and electrical rough-in specifications require consulting the product manual before wall cutouts
- At 36 inches wide, the unit may appear small on large feature walls or beneath wide-screen televisions over 55 inches
- Manufacturer-listed 400-square-foot heating coverage depends on room layout, ceiling height, and home insulation levels
The Napoleon Entice 36 (model NEFL36CFH-1) is a contemporary 36-inch linear electric fireplace designed for homeowners, remodelers, and apartment dwellers who want modern flame ambiance and supplemental heat without sacrificing floor space. Measuring 36 inches wide, 16.94 inches high, and 5.44 inches deep, this compact linear unit suits bedrooms, home offices, dens, and secondary living areas where larger 50-inch or 60-inch fireplaces would overwhelm the wall.
Heating capability is driven by an integrated 1,500-watt heating element that produces 5,000 BTUs of warmth. Napoleon rates this output to provide supplemental zone heat for rooms up to 400 square feet, making it useful for taking the chill out of everyday living zones. Visual ambiance is highlighted by an included glass crystal ember bed and multiple flame color settings, allowing you to match the display to your interior styling using the included handheld remote control.
Construction quality centers on a clean, modern aesthetic with a black, nearly frameless front glass panel. Weighing 40.8 pounds, the unit has a solid structural feel while remaining light enough for manageable handling during installation. The minimalist perimeter trim directs visual focus entirely toward the flame motion and crystalline media, delivering a contemporary built-in look whether surface hung or set into drywall.
Installation flexibility is one of the standout features of the Entice 36. You can choose a quick surface wall mount using the included hanging bracket and basic wall anchors, or recess the firebox fully into framed wall construction so the face sits flush without protruding into the room. Buyers planning a recessed buildout will need to check Napoleon's installation manual to confirm rough framing dimensions, stud spacing, and outlet placement.
A few practical limitations should be kept in mind prior to purchase. While the exterior depth is approximately 5.4 inches, exact framing cutout tolerances and circuit guidelines must be verified directly from manufacturer documentation before opening drywall. Additionally, 5,000 BTUs is designed strictly for supplemental zone warmth, so heating performance in larger or drafty open-concept layouts will be limited compared to a dedicated primary heating source.
The Napoleon Entice 36 is an excellent choice for buyers who want an established brand name, flexible mounting methods, and contemporary linear styling in a space-conscious 36-inch width. Its dual-mount versatility and vibrant crystal ember bed make it an appealing upgrade for modern master suites, home offices, and apartment living rooms.
Surface wall hanging is the quickest path to enjoying the Napoleon Entice 36. The included mounting bracket mounts directly to wall studs or reinforced drywall anchors, allowing you to hang the 40.8-pound unit securely much like a flat-panel television.
For a clean architectural finish, the fireplace can also be installed fully recessed into framing. This configuration allows the unit to sit completely flush with the surrounding wall, ensuring it does not protrude into your living space or walkways. Installers should always review the official manufacturer manual for required rough-opening dimensions, framing clearances, and power supply routing before construction begins.
The Entice 36 features a 1,500-watt heating system producing 5,000 BTUs, which the manufacturer lists for supplemental zone heating in rooms up to 400 square feet. Zone heating enables you to warm the immediate room you are using without adjusting central thermostat settings for the entire house.
Ambiance can be tailored to your mood through multiple flame color options that reflect against the included glass crystal ember bed. The supplied remote control provides convenient access to power, heat, and visual settings from the comfort of your couch or desk.
Pros
- Masonry-style interior panels and textured log set deliver a traditional, built-in aesthetic
- Independent flame and heat operation allows year-round decorative use
- Four flame intensity settings provide flexibility for varying room lighting conditions
- Generous 36-inch class firebox opening creates a balanced centerpiece for custom hearth designs
Cons
- Rough framing cutout dimensions, electrical voltage, and wattage ratings are not specified in the basic data and must be verified prior to installation
- Heavy 82-pound unit requires two-person lifting and secure structural framing
- Specific heating coverage area in square feet is not provided by the manufacturer
The SimpliFire 36-Inch Built-In Electric Fireplace (model SF-BI36-EB) is a recessed electric firebox designed for homeowners, builders, and remodelers seeking a traditional masonry hearth appearance without the maintenance of a wood or gas chimney. Built with a black exterior enclosure, this unit is engineered for permanent installation inside framed walls, custom mantel surrounds, or media chases.
Visual ambiance is one of the standout aspects of this firebox. The interior features a masonry-style brick-pattern lining paired with a textured log set to create authentic hearth depth. Users can adjust the flame display across four distinct intensity levels, making it easy to match the brightness to daytime sunlight or softer evening relaxation. Because the flame system functions independently of the heater, you can enjoy flickering flames during warmer months without adding unwanted heat to the room.
Heating capability comes from an integrated heater designed to provide supplemental warmth on chilly days. While the heater can be engaged alongside the visual display or switched off completely, the manufacturer does not list exact wattage or BTU specifications in the initial product data. Consequently, this unit should be planned as an auxiliary zone-heating supplement rather than a standalone primary heat source for large living areas.
In terms of physical dimensions, the outer chassis measures 37 inches in width, 31.22 inches in height, and 11.75 inches in depth, with a total weight of 82 pounds. It is critical to recognize that overall product dimensions do not equal rough framing cutouts. Anyone framing a new enclosure or retrofitting an existing cavity must consult the manufacturer installation manual to confirm rough-in tolerances, stud spacing, and minimum clearances to combustible materials.
Before moving forward with an installation, buyers must also verify the electrical requirements. The product specifications do not state whether this model utilizes a standard 120-volt plug-in connection or requires direct hardwiring on a dedicated circuit. Additionally, control methods such as handheld remotes or compatible wall switches should be confirmed to ensure the operating setup matches your room layout.
Overall, the SimpliFire SF-BI36-EB is an appealing option for homeowners who want the stately look of a traditional brick fireplace in a clean, electric format. Its masonry interior, detailed logs, and flexible flame intensity make it an attractive architectural centerpiece, provided you verify the rough opening dimensions and electrical supply requirements before construction begins.
The SimpliFire SF-BI36-EB features outer dimensions of 37 inches wide by 31.22 inches high by 11.75 inches deep, with an overall weight of 82 pounds. These measurements reflect the external casing of the unit.
Because this model is intended for built-in mounting, rough opening dimensions will differ from the unit dimensions. Verify the required framing width, height, and depth in the manufacturer documentation before building or modifying your enclosure.
This electric firebox utilizes a masonry-style interior lining and an integrated textured log set to capture the visual appeal of a traditional wood hearth. Four flame intensity settings allow you to dial in the appropriate level of firebox illumination.
With independent heating controls, the flame effects can run with or without the heater turned on, providing year-round visual ambiance regardless of the season.
Pros
- True two-sided see-thru firebox visually unites two separate living spaces
- Switchable privacy glass allows instant control over sightlines between rooms
- Wide visual customization with 3 flame colors, 5 speeds, and 15 ember bed tones
- Clean black surround integrates smoothly into contemporary wall builds
Cons
- Heavier unit at 101.2 pounds that requires dedicated structural framing support
- Product data omits heating wattage, BTU ratings, and recommended heating square footage
- Electrical supply requirements and wiring configurations must be verified in the product manual prior to framing
The Napoleon Clearion NEFBD50HE is a specialized 50-inch see-through electric fireplace engineered for homeowners, interior designers, and remodelers looking to bridge two spaces with a single architectural feature. By utilizing a true two-sided firebox layout, it delivers an open hearth aesthetic between living rooms, primary suites, or dining areas. This configuration bypasses the complex chimney drafting, gas lines, and masonry work required by traditional double-sided fireplaces.
Visual customization and privacy control represent the core strengths of this model. The built-in privacy glass allows users to electronically shift between transparent, semi-transparent, and fully opaque settings. This capability gives you the flexibility to maintain an open, interconnected feel between rooms or establish complete visual separation whenever desired. Visual settings are further expanded by three selectable flame colors, five flame speeds, and fifteen ember bed color choices for tailored ambiance.
Regarding build and form factor, the unit features an exterior measuring 50 inches wide, 18.38 inches high, and 8.06 inches deep, framed in a clean black enclosure. Weighing 101.2 pounds, the unit has a substantial, rigid build meant for permanent installation in an interior partition wall. The dual glass viewing panels maximize the visibility of the internal flame and ember bed components from both sides of the wall opening.
Proper structural planning is essential when preparing for installation. Because the Clearion NEFBD50HE is designed to penetrate a dividing wall with its 8.06-inch chassis depth, contractors must account for framing dimensions, wall thickness, drywall finish, and surrounding clearances. Because the supplied specifications do not state whether the unit uses a standard plug or requires direct hardwiring, prospective buyers should verify electrical circuit requirements and connection types before framing the rough opening.
A primary consideration for potential buyers relates to heat performance details. The manufacturer data highlights the multi-color flame system and privacy glass, but it does not specify British Thermal Units (BTU), total heating wattage, or listed square-foot heating coverage. Homeowners seeking a fireplace specifically for supplemental zone heating will need to check the official technical manual to confirm heat capabilities and thermostat controls.
For renovators and homeowners seeking a modern room divider with flexible privacy options and multi-color flame effects, the Napoleon Clearion 50-inch fireplace serves as an attractive solution. Its unique privacy glass and customizable lighting make it a distinctive centerpiece for shared spaces where traditional venting is not an option.
The Napoleon Clearion NEFBD50HE provides extensive ambiance options tailored for contemporary home decor. With three selectable flame colors and five flame speeds, you can set the movement and visual tone to match the occasion. In addition, fifteen ember bed color options provide flexible accent lighting along the bottom of the firebox.
A standout attribute is the adjustable privacy glass. Users can cycle between clear transparency to connect two rooms, semi-transparency for a frosted effect, and fully opaque for complete seclusion. This feature allows the fireplace to serve either as an open window between rooms or as a private hearth on each side.
The fireplace measures 50 inches in width, 18.38 inches in height, and 8.06 inches in depth, finished in a modern black frame. Because it is engineered as a two-sided see-through unit, it is built to be recessed through an interior wall partition rather than mounted flat against a single surface.
With a total weight of 101.2 pounds, this model requires adequate framing support within the wall cavity. Buyers and installers should review the manufacturer rough opening guidelines and wall depth requirements to ensure a seamless flush-finish installation.
Frequently Asked Questions
What rough opening dimensions are needed for a 36-inch electric firebox?
Framing cutouts must match the exact chassis dimensions provided in the product manual rather than the outer trim width. While a unit is labeled 36 inches, the internal metal firebox typically requires a specific recess depth between 7.7 and 9 inches. Measure height, width, and framing depth carefully before securing any wall studs.
Can a napoleon elevation 36 built in electric fireplace be installed directly below a television?
Yes, as long as you follow the manufacturer-specified vertical clearance guidelines. Most front-discharge electric fireplaces require at least 8 inches of space between the top grille and the bottom edge of a television. Front-facing blowers direct warm air into the room rather than upward against the TV frame.
Does a 36-inch electric fireplace require a dedicated circuit?
Usually, a dedicated 15-amp or 20-amp electrical circuit is strongly recommended. Most 1,500-watt electric fireplaces pull around 12 amps at maximum heat. Sharing that electrical line with other high-power devices can trip the breaker during cold winter days.
How does an electric firebox differ from direct-vent gas units?
Electric units supply supplemental zone heating for up to 400 square feet without venting, chimneys, or gas connections. In contrast, direct vent linear gas options require dedicated venting and fuel lines while producing higher overall heat outputs. Electric models also permit flame-only operation without activating the heater.
Can you recess an electric insert into a masonry fireplace?
Yes, built-in electric inserts can fit into existing masonry openings once the chimney flue is sealed and gas lines are capped. Installing draft stopper fireplace blockers stops outdoor drafts from chilling the interior firebox. Always verify that a grounded 120-volt power outlet is accessible nearby.
Can the flame visuals run without activating the heat?
Yes, independent flame operation is standard on built-in electric units, allowing year-round fireside ambiance without any heat output. The LED lighting system runs on minimal power, keeping glass fronts comfortable to touch while letting you customize ember colors and flame brightness during warmer months.


Write Your Review
No reviews yet. Be the first to share your experience!