Ages 18-24? Explore Prime for Young Adults and see if you are eligible

Updating a drafty hearth or building a modern media wall often brings builders face to face with tight framing dimensions and venting demands. A sleek napoleon ascent linear series 36 direct vent gas fireplace offers the clean lines homeowners crave, combining sealed direct-vent safety with dedicated zone heating. But getting the installation right means checking whether your setup runs on natural gas or liquid propane before ordering, since gas valves and pilot assemblies are fuel-specific. You will also want to plan for proper wall finishes, framing clearances, and matching surround accessories for linear fireplaces to protect nearby drywall.

Reliable ignition makes all the difference when cold weather hits, which is why keeping up with genuine pilot assemblies and remote receivers matters. A quality Napoleon Ascent Linear Series 36 Direct Vent Gas Fireplace setup gives you independent flame control, backed up by battery-powered ignition systems that keep flames burning even during unexpected winter power outages. Matching burner media, like glowing ember beds or tempered fire glass, turns any 36-inch firebox into an eye-catching focal point without sacrificing everyday heating performance. Taking time to verify gas line sizing, vent run paths, and manufacturer clearance guidelines helps you avoid costly drywall rework down the road.

1
Best Seller

WS-100-38 Direct Vent Natural Gas Pilot Assembly

Generic
9.9 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
This WS-100-38 natural gas pilot assembly is an aftermarket SIT side-mount replacement designed for compatible direct-vent gas fireplaces and Napoleon stoves. It includes the pilot tubing, spark electrode, thermocouple, and thermopile, making it a practical complete kit for homeowners and repair technicians troubleshooting pilot outage or ignition failure.
Pros & Cons

Pros

  • Includes every core ignition component: pilot hood, gas line, electrode, thermocouple, and thermopile
  • Matches an extensive list of direct-vent replacement part numbers across Napoleon and SIT systems
  • Cost-effective aftermarket alternative to purchasing individual flame sensors separately
  • Dedicated natural gas orifice setup ensures appropriate pilot flame pattern when installed in compatible appliances

Cons

  • Configured strictly for natural gas and cannot be used with propane systems without verified conversion components
  • As an unbranded replacement part, exact bracket alignment and connector threads must be matched against your existing unit prior to ordering
  • Working with gas lines and combustion components requires careful safety precautions or professional installation
Detailed Review

The WS-100-38 natural gas pilot assembly is an aftermarket replacement part engineered for direct-vent gas fireplaces, gas fireplace inserts, and freestanding gas stoves that utilize a side-mount SIT pilot bracket. This component is specifically aimed at existing gas fireplace owners, property managers, and repair technicians dealing with common pilot issues, such as a pilot flame that will not stay lit, weak millivolt output to the gas control valve, or a failed spark igniter.

In gas fireplace operation, the pilot assembly serves as the foundational safety and ignition hub. This particular unit includes the spark electrode for ignition, a thermocouple to keep the safety magnet open in manual valves, and a thermopile (generator) that produces the electrical current required to operate main burner valves and wall switches. When installed in compatible natural gas appliances, it produces the targeted pilot flame required to envelop both sensor probes while smoothly bridging the flame to the main burner tube.

The build consists of a durable metal side-mount bracket finished in silver, designed to hold the pilot hood, sensors, and ignition lead rigidly in place against combustion draft and thermal cycles. Because direct-vent fireboxes undergo repeated heating and cooling, the pre-crimped sensor leads, threaded thermocouple connection, and flexible aluminum pilot tubing provide standard mechanical connections that correspond to standard SIT gas train layouts.

Installation involves removing the glass door barrier of the direct-vent fireplace, disconnecting the old pilot tube and wiring leads from the gas valve, unbolting the side-mount bracket from the burner base, and securing this unit in the identical orientation. Because it replaces several individual components simultaneously, it eliminates the need to diagnose whether an ignition failure stems from a deteriorating thermocouple, an oxidized thermopile, or a cracked ceramic electrode insulator.

Important limitations center on fuel and mechanical fit. This pilot assembly is explicitly manufactured for natural gas fuel supplies and direct-vent setups; it must not be used on liquid propane systems without verified, appliance-approved conversions. Furthermore, while the manufacturer lists cross-compatibility with several part numbers including 30200, 700-088, 69L17, 904405, H3466, RPA020, WS100-38, 0199702, and 910-034, buyers should physically compare the mounting bracket configuration and pilot hood angle against their original equipment to verify a precise match.

Overall, this replacement pilot assembly offers a practical, budget-friendly repair solution when an existing Napoleon or SIT-equipped natural gas direct-vent fireplace suffers from pilot failure. For homeowners comfortable with gas appliance maintenance, or technicians seeking an all-in-one replacement package, it provides the essential components needed to restore reliable hearth heating without the expense of full burner replacement.

Replacement Compatibility

Compatibility verification is essential before purchasing replacement gas fireplace components. This SIT side-mount pilot assembly is listed to replace OEM part numbers 30200, 700-088 (700088), 69L17 (69L1701, 69L17_0), 904405, H3466, RPA020, WS-100-38 (WS100-38), 0199702, and 910-034.

It is commonly matched to select Napoleon gas burning stoves and direct-vent gas fireplaces utilizing standard side-mounting SIT pilot brackets. Buyers should check their appliance rating plate, owner manual, or existing pilot bracket geometry to confirm that both the mounting footprint and the natural gas designation match before beginning repairs.

Fuel & Venting

This pilot assembly is designated exclusively for natural gas direct-vent appliances. Natural gas and liquid propane operate at different line pressures and require specific orifice dimensions to maintain correct air-fuel combustion, meaning this assembly cannot be installed in propane fireplaces without factory-approved adjustments.

Because direct-vent fireplaces operate with sealed combustion chambers, maintaining an airtight firebox seal and leak-free gas connections after installing this pilot assembly is mandatory for safe operation. A gas leak test should always be performed on all fittings prior to reigniting the appliance.

2
Editor's Pick

Sierra Flame Newcomb 36 Direct Vent Linear Natural

Sierra Flame
9.9 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The Sierra Flame Newcomb 36 is a 36-inch direct-vent natural gas linear fireplace featuring electronic ignition, clean face tempered glass, and included fire media and remote control. It is a solid choice for homeowners and remodelers looking to build a sleek, contemporary gas fireplace into an interior living space.
Pros & Cons

Pros

  • Clean-face linear design with tempered glass offers an uncluttered modern hearth profile
  • Includes both decorative fire glass and rock media as well as a digital remote control
  • Direct-vent configuration exhausts outdoors while drawing outside air for sealed combustion
  • Electronic ignition eliminates the fuel waste of a standing pilot
  • Substantial 115-pound build quality with a clean black enclosure finish

Cons

  • Requires professional natural gas plumbing and direct-vent pipe routing through an exterior wall or roof
  • Specific BTU heat output and rough framing cutout dimensions are not listed in the basic product data and must be confirmed in the manual
  • Configured specifically for natural gas without an included or verified propane conversion kit
Detailed Review

The Sierra Flame Newcomb 36 is a dedicated 36-inch direct-vent linear natural gas fireplace tailored for homeowners, builders, and remodelers creating a modern focal point. Designed to be built into a wall or custom enclosure, this unit replaces traditional bulky hearth formats with a streamlined horizontal profile. If you have an accessible natural gas line and desire authentic gas flames with modern electronic operation, this fireplace provides a comprehensive package with media and controls included.

In terms of daily operation, the Newcomb 36 uses an electronic ignition system to initiate the flame, avoiding the continuous fuel consumption associated with older standing pilot designs. The sealed direct-vent combustion system pulls air from outside and vents exhaust outdoors, helping protect indoor air quality. Ambiance is immediately customizable out of the box because the fireplace ships with both decorative fire glass and natural-style rock media. The included deluxe digital remote control lets you operate the burner without having to open the front glass or access internal controls manually.

The build quality centers around a durable black chassis weighing 115 pounds, reflecting heavy-duty construction suited for permanent wall integration. A clean-face surround frame sits flush against your finishing materials, while the tempered front glass provides a clear view of the linear burner bed. The clean lines allow tile, non-combustible facing, or stone to frame the glass directly, creating a sleek appearance common in contemporary living spaces.

Regarding physical footprint, the exterior dimensions measure 15.5 inches deep, 38 inches wide, and 33.5 inches high. Because this is a built-in direct-vent gas appliance rather than a freestanding or plug-and-play unit, planning is essential. You must account for appropriate direct-vent pipe runs through an exterior wall or roof, route a dedicated natural gas line to the chassis, and adhere to manufacturer clearances to combustibles. Buyers should verify exact rough framing cutouts and electrical requirements for the ignition system in the official installation manual prior to cutting into wall framing.

A realistic limitation is that specific BTU output ratings, thermal efficiency figures, and room heating square-footage guidance are not provided in the basic product data. While gas fireplaces naturally deliver supplemental heat, you will need to review manufacturer documentation to confirm exact heat specifications for your climate and room volume. Additionally, the unit is configured for natural gas; anyone hoping to use liquid propane must verify conversion compatibility before purchasing.

For homeowners and remodelers seeking a contemporary 36-inch linear natural gas fireplace with clean-face aesthetics, electronic ignition, and included digital controls, the Sierra Flame Newcomb 36 is a practical, feature-complete option. Its bundled media and remote make setup straightforward once gas and venting lines are properly routed by a licensed professional.

Fuel & Venting

The Sierra Flame Newcomb 36 is engineered specifically to operate on natural gas. Natural gas configurations require connection to a household gas utility line. Liquid propane is not interchangeable, and fuel conversion should never be assumed without explicit manufacturer kits and instructions.

As a direct-vent appliance, this fireplace uses a sealed combustion system. It draws outdoor air for combustion while safely venting exhaust gasses outside through specialized venting pipe routed through an exterior wall or roof. This design preserves indoor air quality compared to vent-free designs. Professional installation by a licensed gas technician is recommended to ensure gas line pressures and direct-vent clearances meet all local building codes.

Fit & Dimensions

The overall exterior dimensions of the Sierra Flame Newcomb 36 are 15.5 inches deep, 38 inches wide, and 33.5 inches high, with a total unit weight of 115 pounds. The nominal 36-inch width refers to the viewing and burner tier, while the 38-inch total width encompasses the chassis housing.

Because product dimensions do not equal rough framing dimensions, remodelers must consult the official manufacturer installation guide to determine exact stud spacing, framing header heights, platform requirements, and non-combustible wall clearances. Ensuring your planned wall cavity provides sufficient depth for both the 15.5-inch chassis and the required rear direct-vent elbow is critical before framing begins.

3
Limited Time

Napoleon WS-100-39 Propane Gas Pilot Assembly

Napoleon
9.8 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The Napoleon WS-100-39 is a dedicated replacement propane gas pilot assembly engineered for compatible Napoleon direct-vent fireplaces utilizing a side-mount configuration. It is an ideal fix for homeowners and technicians seeking to restore reliable ignition and stable pilot flame performance on LP-fueled direct-vent hearth systems.
Pros & Cons

Pros

  • Genuine Napoleon part engineered to match factory side-mount specifications and alignment
  • Configured specifically for liquid propane direct-vent fireplace installations
  • Complete assembly format simplifies swapping out aging, corroded, or malfunctioning pilot parts
  • Restores consistent pilot flame generation and smooth main burner ignition

Cons

  • Restricted exclusively to propane gas systems and cannot be used for natural gas configurations
  • Requires fireplace owners to verify part number WS-100-39 against their specific model manual prior to purchase
  • Gas supply line connection typically requires installation by a qualified service professional
Detailed Review

The Napoleon WS-100-39 Propane Gas Pilot Assembly is an authentic replacement part designed specifically for select Napoleon direct-vent gas fireplaces fueled by liquid propane (LP). This complete assembly is intended for homeowners, property managers, and hearth technicians who need to resolve recurring pilot outages, weak ignition flames, or worn thermocouple and thermopile components on an existing side-mounted pilot bracket.

As an essential ignition component, this pilot assembly delivers the steady pilot flame required to safely ignite the main gas burner and energize the millivolt safety circuit. Because the assembly is factory-configured for liquid propane, the internal orifice is sized precisely for propane operating pressures. In sealed direct-vent fireplaces, having an exact-fit pilot assembly is vital for maintaining balanced combustion airflow and dependable flame-sensing operation.

Constructed with durable metal brackets and high-temperature ignition leads, the unit features a classic black bracket finish and measures approximately 8 by 2 by 5 inches with an overall weight of roughly 0.81 pounds. The side-mount design matches designated Napoleon firebox footprints, keeping the pilot hood and flame sensor positioned at the correct angle relative to the burner ports for smooth flame transfer.

Installing this side-mount pilot assembly requires accessing the lower firebox, shutting off the gas supply, and disconnecting the pilot tubing and wiring harnesses from the gas control valve. Because this replacement component connects directly to a pressurized gas line inside a sealed combustion chamber, leak testing is mandatory, and installation by a qualified gas technician or certified hearth professional is strongly recommended.

The main limitation of this assembly is its strict fuel and mounting specificity. It is engineered exclusively for liquid propane direct-vent models and cannot be adapted for natural gas systems without proper manufacturer conversion hardware. Furthermore, the side-mount bracket will not work in Napoleon fireplaces requiring a top-mount or rear-mount pilot bracket. Buyers should inspect their fireplace rating plate and owner manual schematics to verify that part number WS-100-39 matches their appliance requirements.

For owners of compatible Napoleon direct-vent propane fireplaces struggling with ignition failure or an uncooperative pilot flame, the WS-100-39 pilot assembly provides a direct, cost-effective replacement. It restores reliable pilot operation and burner ignition without the expense of replacing the entire fireplace burner assembly.

Fuel & Venting

The Napoleon WS-100-39 is engineered strictly for liquid propane (LP) applications. Propane operates under significantly higher manifold pressure than natural gas and requires a smaller pilot orifice to ensure clean, safe combustion. This assembly should never be connected to a natural gas line.

Direct-vent fireplaces utilize a completely sealed combustion chamber that draws fresh air from outdoors and vents exhaust outside through dedicated venting pipe. Maintaining an exact factory-spec pilot assembly inside this sealed environment ensures that draft pressures remain balanced and the pilot flame does not pull away from the sensor during operation.

Replacement Compatibility

Compatibility for the Napoleon WS-100-39 relies on three critical factors: brand, fuel type, and mounting geometry. This component is designed specifically for Napoleon direct-vent gas fireplaces that use liquid propane and call for factory part number WS-100-39.

Before ordering, check the user manual or exploded parts diagram on the appliance data plate located inside your fireplace control compartment. Verify that your unit utilizes a side-mount pilot bracket rather than a rear or bottom bracket, as bracket styles are not interchangeable across different firebox designs.

4
Top Rated

Empire Comfort Systems 36-Inch Direct-Vent Liquid

Empire Comfort Systems
9.8 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The Empire Comfort Systems 36-inch direct-vent liquid propane fireplace is a built-in gas hearth appliance featuring a reliable millivolt ignition valve and an included heat circulation blower. It is an ideal fit for homeowners and remodelers building out propane-fueled living spaces who want off-grid heat capability during electrical outages.
Pros & Cons

Pros

  • Direct-vent closed system pulls combustion air from outside to preserve indoor ambient air
  • Millivolt control system functions without household electrical power for emergency winter heating
  • Factory-included circulation blower assists in distributing warm air outward into the room
  • Pre-configured from the factory for dedicated liquid propane supply lines

Cons

  • Factory-set for liquid propane (LP); buyers needing natural gas must verify conversion kit availability
  • Requires professional gas plumbing, leak testing, and dedicated direct-vent pipe termination
  • Rough framing openings, mantel clearances, and decorative media components should be verified prior to installation
Detailed Review

The Empire Comfort Systems Premium 36-inch Direct-Vent LP Fireplace with Blower is a built-in gas hearth appliance tailored for living rooms, family rooms, and cabins that utilize liquid propane. Engineered as a permanent heating fixture, this unit is well suited for homeowners, builders, and remodelers who want the convenience of clean-burning gas heat paired with off-grid reliability.

Functionally, the direct-vent setup provides a sealed combustion system that brings in fresh outdoor air for the burner while exhausting combustion byproducts straight to the exterior of the home. This configuration helps protect indoor air quality and eliminates the room drafts often associated with open masonry hearths. Operating on a millivolt gas valve, the fireplace utilizes a standing pilot light to generate small amounts of electricity, which allows the main burner to cycle on and provide supplemental warmth during winter storms and power outages. The factory-included blower actively moves air across the heated firebox walls to distribute warm air throughout the living space.

Regarding build quality, Empire Comfort Systems constructs this 36-inch platform around a heavy-gauge steel firebox with a sealed glass viewing assembly. The millivolt control valve and gas connections are located behind the lower access panel, keeping mechanical components protected while maintaining straightforward access for maintenance. The integrated blower motor is positioned within the chassis to channel airflow around the perimeter of the firebox.

Installation requires careful planning around gas lines, framing dimensions, and venting pathways. Because this unit uses nominal 36-inch sizing, buyers must consult the manufacturer rough framing diagrams before building out wall studs, non-combustible facing materials, or mantel shelves. The direct-vent pipe must follow approved vertical or horizontal clearance paths to an exterior termination cap. Professional installation by a licensed gas fitter or qualified hearth technician is necessary to ensure proper fuel line pressure, venting seal integrity, and safe operation.

A few practical considerations exist with this specific configuration. Because this model is configured at the factory strictly for liquid propane (LP), homeowners with municipal natural gas utilities cannot use it out of the box and must verify if a compatible conversion kit is available. In addition, base product documentation focuses on the core firebox, valve, and blower, meaning buyers should confirm which decorative log sets, firebox liners, or wall switches are included or need to be ordered separately.

Overall, the Empire Comfort Systems 36-inch LP direct-vent fireplace offers a balanced combination of traditional gas reliability and active convection heating. For property owners heating with dedicated propane tanks who value storm-ready millivolt operation, this fireplace serves as an attractive, functional heating center for the home.

Fuel & Venting

This fireplace is engineered specifically for liquid propane (LP) fuel systems, making it suitable for rural, suburban, or vacation properties running on exterior bulk propane tanks. Liquid propane operates under different supply pressures than natural gas, requiring dedicated factory-sized orifices and regulator settings.

The direct-vent exhaust system uses a sealed venting run that draws outdoor air directly into the firebox for combustion while expelling exhaust fumes outdoors. This eliminates heat loss through open dampers and requires strict adherence to manufacturer horizontal and vertical venting length requirements.

Blower & Controls

The millivolt valve system uses a standing pilot light to generate its own micro-voltage across a thermopile. This self-powered control circuit allows the fireplace burner to ignite and operate via a wall switch or millivolt thermostat even when municipal electric power is down.

The integrated circulation blower actively propels convection heat out of the upper louvers and into the living space. Buyers should verify electrical outlet requirements behind the lower fireplace surround to provide power for the blower motor.

5

Sierra Flame Palisade 36-Inch See-Thru Linear

Sierra Flame
9.8 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The Sierra Flame Palisade-36-LP is a 36-inch double-sided linear direct-vent gas fireplace running on liquid propane with electronic ignition. Featuring included fire glass, rock media, and a handheld remote, it is an excellent architectural choice for homeowners and remodelers looking to divide spaces with two-sided flame visibility.
Pros & Cons

Pros

  • See-thru linear design provides dual-room flame ambiance through two viewing sides
  • Direct-vent configuration exhausts outdoors for closed-combustion safety
  • Comes complete with remote control, fire glass, and a rock media set
  • Electronic ignition provides modern, dependable burner start-up
  • Clean-face aesthetic with black trim pairs cleanly with modern home designs

Cons

  • Requires professional direct-vent piping, gas line fitting, and dedicated wall framing
  • Configured strictly for liquid propane; natural gas users must verify conversion compatibility separately
  • BTU heating output and exact rough opening tolerances are omitted from specifications and require manual verification
Detailed Review

The Sierra Flame Palisade-36-LP is a 36-inch see-through linear direct-vent gas fireplace designed specifically for liquid propane (LP) fuel hookups. Featuring dual-sided viewing panels, this built-in model suits homeowners, remodelers, and custom home builders aiming to connect two adjoining spaces - such as a master suite and bathroom or an open living and dining area - with an eye-catching, shared linear flame presentation.

Operating on liquid propane, the Palisade fireplace utilizes electronic ignition for straightforward burner management without the continuous consumption of a standing pilot light. The included handheld remote control allows you to engage the fireplace conveniently from across the room. To complete the interior burner aesthetic, the package includes both decorative fire glass and a rock media set, letting you style the flame bed to match contemporary or transitional decor.

The unit features a clean-face black surround accented by tempered glass viewing panes on both sides. Weighing 105 pounds, the firebox is engineered with a compact 10.87-inch depth, 39.5-inch width, and 32-inch height. This shallow depth makes it practical when planning an interior dividing wall, where minimizing overall wall thickness is a major structural and design priority.

Because this is a direct-vent gas appliance, it requires approved direct-vent pipe routing to draw outside air for combustion while venting exhaust gases through an exterior wall or roof. Installation involves running a dedicated propane supply line, coordinating framing clearances, and providing electrical service for the electronic ignition system. Product dimensions must not be substituted for rough framing dimensions; always consult the manufacturer installation guide for framing cutouts and combustible clearances.

A critical consideration for prospective buyers is fuel specificity. The Palisade-36-LP is dedicated to liquid propane out of the box, meaning homes using natural gas would require verified conversion kits, which are not noted in the basic product specifications. Furthermore, specific BTU ratings and room heating square-footage guidelines are not listed in the summary data, so buyers should review technical submittal sheets to ensure the heat profile aligns with their space.

For homeowners and renovators looking for a contemporary double-sided propane fireplace, the Sierra Flame Palisade-36-LP delivers a striking two-way visual display. Its included media options, remote control, and clean-face styling make it a compelling choice for upscale dividing-wall projects, provided you plan for professional gas, electrical, and direct-vent installation.

Fuel & Venting

The Sierra Flame Palisade-36-LP is configured explicitly for liquid propane (LP). Natural gas hookups should not be used without confirming verified manufacturer conversion hardware and procedures. Ensure proper supply line sizing and tank pressure regulation prior to connection.

As a direct-vent gas appliance, this fireplace operates on a sealed combustion system. It pulls combustion air directly from the outdoors and expels combustion byproducts through dedicated venting pipe, avoiding indoor air depletion. Vent runs, elbow maximums, and termination clearances must be planned strictly according to the installation manual.

Installation & Dimensions

This linear see-thru model measures 10.87 inches deep by 39.5 inches wide by 32 inches high, with a total weight of 105 pounds. The relatively slim depth makes it well-suited for framing into double-sided interior partition walls or peninsula structures.

Do not use the exterior dimensions as your rough framing cutouts. Adequate clearance to combustible wall materials, non-combustible facing requirements around the tempered glass, and access for the electronic ignition system must all be verified before framing begins.

6

Empire Boulevard 36-Inch Vent-Free Natural Gas

Empire Comfort Systems
9.5 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The Empire Boulevard 36-Inch Vent-Free Natural Gas Linear Fireplace delivers a sleek modern flame display without the structural need for exterior chimney venting. Featuring an intermittent pilot system and a thermostat variable remote, it is an ideal choice for homeowners and remodelers building a custom contemporary hearth wall where venting is impractical.
Pros & Cons

Pros

  • Vent-free architecture eliminates chimney construction, wall cutting, and exterior exhaust pipe installation
  • Includes an intermittent pilot system paired with a variable thermostat handheld remote control
  • Provides a wide, modern 36-inch linear firebox format for contemporary custom wall enclosures
  • Modular design accommodates separate decorative liners, trim surrounds, and media packages for personalized styling

Cons

  • Vent-free gas appliances are subject to regional code restrictions and are prohibited in certain U.S. jurisdictions and room types
  • Decorative liners, trim kits, and burner media are sold separately and must be purchased to complete the finished look
  • Framing dimensions, non-combustible clearances, and exact BTU output are not provided in the primary specifications and require manual verification
Detailed Review

The Empire Comfort Systems Boulevard 36-Inch Vent-Free Natural Gas Linear Fireplace is a built-in hearth appliance designed for remodelers, builders, and homeowners seeking a wide-format focal point without the structural complication of an exterior chimney. Operating as a vent-free natural gas system, this unit provides an installation pathway for interior walls and room layouts where running vertical venting through a roof or horizontal pipes through an outside wall is not feasible. It is tailored for households with a dedicated natural gas supply seeking a clean, horizontal flame presentation.

Operation is centered on a contemporary burner controlled by an intermittent pilot (IP) ignition system and an included thermostat variable remote control. The intermittent pilot configuration sparks the burner only when heat or flame is requested, avoiding the continuous fuel use of an active standing pilot. Handheld remote control allows users to adjust flame height and manage room comfort via thermostatic control. Because exact BTU ratings and heating area limits are not detailed in the raw product specifications, buyers should verify the thermal output against the room cubic footage to ensure balanced warmth.

The outer firebox is constructed with a durable black finish, measuring 45 inches long, 15 inches wide, and 24 inches high, and weighs 95 pounds. The internal linear burner stretches across the 36-inch opening to create an even, horizontal flame pattern. Empire Comfort Systems builds this model as a customizable unit, leaving aesthetic finish selections open. Interior reflective or ceramic liners, finishing trim pieces, and decorative burner media such as fire glass or stone kits are sold separately, giving buyers freedom to personalize the interior aesthetic.

Installation involves framing the appliance into a wall cavity or custom enclosure and connecting it to a licensed natural gas supply line and appropriate electrical supply for the intermittent pilot control. The listed dimensions of 45 by 15 by 24 inches reflect the unit exterior, meaning rough framing dimensions and clearances to combustible materials must be confirmed directly from the manufacturer installation instructions. Because vent-free gas appliances release combustion air directly into the room, buyers must also ensure the installation space meets minimum room volume requirements.

Practical limitations focus on code compliance, fuel requirements, and out-of-the-box completeness. Vent-free appliances face strict local building code regulations across various U.S. states and municipalities, and they may be restricted in smaller spaces such as bedrooms or bathrooms. Additionally, this model is built for natural gas, so it cannot be used with liquid propane without verified factory conversion equipment. Buyers should also budget for essential finishing accessories, as trim, liners, and burner media must be purchased separately.

For homeowners planning a contemporary fireplace build where vent routing is structurally impossible, the Empire Boulevard 36-inch linear fireplace is a solid, feature-rich choice. It combines the aesthetic of modern linear flames with the energy efficiency of vent-free gas operation and remote thermostat control. Always check local municipal codes, verify required framing clearances, and budget for your selected decorative media to complete the setup.

Fuel & Venting

This Empire Boulevard fireplace is configured specifically for natural gas line hookups and cannot be used with alternative fuels unless an approved manufacturer conversion kit is verified. A licensed professional should handle the gas supply line connection to ensure correct operating pressure and leak-free performance.

The vent-free classification means this unit does not use a chimney, B-vent, or direct-vent pipe to exhaust byproducts outside. While this ensures virtually all heat stays within the living space, vent-free appliances must comply with strict local building codes. Homeowners must verify municipal legality and room volume guidelines before purchasing or framing this appliance.

Remote & Controls

This fireplace includes an intermittent pilot (IP) ignition system, which electronically lights the burner on demand. This setup prevents continuous gas consumption during off cycles compared to standard millivolt standing pilot lights.

A thermostat variable remote control is supplied with the unit, allowing handheld operation from anywhere in the room. The remote manages ignition, flame height adjustment, and temperature regulation to maintain a comfortable ambient room temperature.

Installation & Fit

The exterior chassis dimensions are 45 inches in length, 15 inches in width, and 24 inches in height, with a total weight of 95 pounds. These numbers represent the appliance itself and should not be used as rough framing opening dimensions.

Custom enclosures require strict adherence to the manufacturer clearance guidelines for non-combustible facing, mantel heights, and side wall clearances. Additionally, decorative interior liners, burner media, and outer trim kits are sold separately and must be planned into the final installation budget.

7

Napoleon Ascent B36 Direct Vent Clean Face Natural

AMS FIREPLACE INC.
9.5 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The Napoleon Ascent B36 (SKU: B36NTRE-1) is a direct-vent natural gas fireplace featuring a clean-face design, realistic PHAZER log set, and an electronic ignition with backup power-failure controls. It is an ideal built-in solution for homeowners and remodelers seeking a reliable, permanent gas hearth for living rooms or media spaces.
Pros & Cons

Pros

  • Louver-free clean face profile provides a modern look that integrates smoothly with custom hearth surrounds
  • Battery-backed control system provides dependable heat during winter storms and electrical power cuts
  • Adjustable flame and heat output lets you balance ambiance and supplemental warmth as conditions change
  • Exclusive PHAZER logs and glowing ember bed deliver an authentic wood-fire look without the mess of firewood

Cons

  • Configured specifically for natural gas; using liquid propane requires verifying a compatible conversion kit
  • Requires professional direct-vent pipe routing, custom framing, and licensed gas line installation
  • Product listing does not detail exact framing dimensions or BTU ratings, requiring verification with the manufacturer manual
Detailed Review

The Napoleon Ascent B36 (model B36NTRE-1) is a built-in direct-vent natural gas fireplace designed for homeowners, builders, and remodelers seeking an attractive, permanent hearth centerpiece. Styled with a clean-face frame that eliminates exterior metal louvers, this unit allows finishing materials like stone, tile, or drywall to frame right up to the firebox. It best suits property owners planning a permanent living room, family room, or media space installation connected to a residential natural gas line.

Burner performance and visual ambiance center on Napoleon's pan-style burner, which distributes gas evenly under the exclusive PHAZER log set and glowing ember bed. The included logs and ember media replicate the warm, organic glow of real firewood without requiring any ash disposal or chimney cleaning. Thanks to the built-in flame and heat adjustment controls, you can decrease the flame height on warmer evenings or increase output when supplemental comfort is needed.

For everyday operation, the electronic ignition system provides straightforward, energy-conscious startups without keeping a standing pilot flame running constantly. A critical advantage of this control layout is the backup power system, which maintains functionality during electrical blackouts. For homeowners in cold-weather regions vulnerable to winter storm outages, this feature provides practical peace of mind by keeping an active heat source operational when the main grid fails.

Because the B36 Ascent is a direct-vent appliance, it operates within a sealed combustion loop, bringing in fresh outside air for burning while safely expelling exhaust outdoors via direct-vent pipe. Planning the installation requires proper rough-framing cutouts, gas supply line plumbing, and appropriate vent pipe clearances through an exterior wall or roof. Due to the technical nature of gas lines and sealed venting, installation should be handled by a licensed professional following local building and mechanical codes.

Buyers should keep in mind that this unit is dedicated to natural gas use, and any potential conversion to liquid propane requires verifying the availability of an approved conversion kit before purchase. Additionally, exact framing dimensions, clearances to combustibles, and specific BTU ratings are not detailed in the raw listing data and must be verified in Napoleon's official product documentation before framing begins.

For remodelers and homeowners looking for a reputable direct-vent gas fireplace that blends clean architectural lines with emergency power-outage readiness, the Napoleon Ascent B36 delivers dependable warmth and a classic fire view.

Fuel & Venting

The Napoleon Ascent B36 (SKU: B36NTRE-1) is factory-configured to run on natural gas and requires a dedicated gas supply line. Direct-vent technology uses a co-axial or co-linear sealed pipe system that pulls fresh combustion air from outside the home while venting combustion gases directly outdoors, protecting indoor air quality.

Because venting routes must conform to strict horizontal and vertical length limits specified by the manufacturer, buyers should verify framing depth, chase clearances, and exterior termination locations with a certified gas professional prior to installation.

Flame & Controls

This fireplace utilizes an electronic ignition mechanism paired with a pan-style burner for smooth, reliable ignition. Inside the sealed combustion chamber, Napoleon's PHAZER log set and glowing ember bed create a natural flame pattern with realistic depth and glow.

Flame and heat adjustment controls allow users to tailor both the flame height and heating output to match room comfort requirements. An integrated backup control system ensures that the fireplace remains functional during electrical outages, delivering dependable heat when household power is lost.

8

Sierra Flame Palisade 36-Inch Direct Vent Natural

Sierra Flame
9.4 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The Sierra Flame Palisade 36-inch See-Thru Fireplace is a direct-vent natural gas linear unit designed to showcase an open flame between two adjoining rooms. Equipped with electronic ignition, included fire glass, rocks, and a remote control, it best suits remodelers and homeowners looking to build an architectural double-sided feature wall.
Pros & Cons

Pros

  • Double-sided see-through configuration enhances two living spaces with one fireplace
  • Bundled with both fire glass and stone rock media alongside a wireless remote control
  • Clean-face aesthetic with tempered glass fits seamlessly into contemporary drywall or tile surrounds
  • Electronic ignition simplifies day-to-day operation

Cons

  • Requires professional natural gas plumbing and dedicated direct-vent pipe routing
  • Manufacturer specifications do not list explicit BTU ratings or heating square footage guidance
  • Double-sided installation demands precise wall depth and structural framing planning
Detailed Review

The Sierra Flame Palisade 36-inch See-Thru Direct Vent Linear Fireplace is a built-in natural gas hearth appliance engineered to sit inside an interior partition wall. By featuring dual-sided tempered glass viewports, this unit is best suited for homeowners, remodelers, and custom home designers aiming to connect two adjoining living areas, such as a living room and dining room or a bedroom and sitting room, with a shared architectural hearth.

Powered specifically by natural gas, this linear fireplace relies on a direct-vent system to draw combustion air from outside while safely venting exhaust gases outdoors. Ignition is controlled through an electronic ignition assembly, eliminating the constant gas consumption of an older standing pilot. While the manufacturer does not supply specific BTU heat ratings or square-foot heating estimates in this listing, the direct-vent linear burner provides focused ambiance and flame warmth across both viewing faces.

Construction quality centers around a 105-pound black steel chassis with a clean-face surround. This border design minimizes visible sheet metal trim, directing visual attention straight onto the linear flame and decorative interior bed. To help tailor the hearth to your interior decor, Sierra Flame packages the fireplace with both contemporary fire glass and a natural rock media set.

Regarding dimensions and installation, the Palisade measures 10.87 inches deep, 39.5 inches wide, and 32 inches high. Installing a see-thru direct-vent fireplace requires exact framing cutouts to account for both finished wall surfaces, properly sloped venting pipes, and a plumbed natural gas line. Day-to-day operation remains effortless thanks to the included handheld remote control, allowing users to start and manage the fireplace from the couch.

Buyers should verify several logistical details before ordering. The product data does not specify rough framing dimensions, BTU output limits, or whether a liquid propane conversion kit is supported. Because gas line sizing, combustible clearances, and venting lengths are dictated by manufacturer manuals and local building codes, planning the installation with a certified gas professional is essential.

For homeowners planning an open-concept partition wall, the Sierra Flame Palisade 36 provides an eye-catching focal point. Its included media options, modern clean-face look, and remote convenience make it a solid choice for dual-room ambiance.

Fuel & Venting

The Sierra Flame Palisade operates exclusively on natural gas as listed. It is not configured for liquid propane in this specification, so buyers must verify whether official conversion kits exist if propane is their primary fuel source.

Because this is a direct-vent fireplace, it utilizes a sealed combustion chamber. Direct-vent pipes must be routed through an exterior wall or roof following manufacturer draft and clearance guidelines, maintaining indoor air quality by isolating combustion gases from the room.

Fit & Dimensions

The exterior product dimensions measure 10.87 inches deep, 39.5 inches wide, and 32 inches high, with a total unit weight of 105 pounds.

Because these numbers represent the fireplace body rather than the rough framing opening, remodelers must consult the official Sierra Flame framing manual to confirm required stud spacing, header heights, and non-combustible finishing clearances for both wall sides.

Frequently Asked Questions

Can a napoleon ascent linear series 36 direct vent gas fireplace run on both natural gas and liquid propane?

No, direct vent gas fireplaces require factory-configured valves and burner orifices for either natural gas or propane, unless an approved manufacturer conversion kit is installed. Using propane in a natural gas valve creates severe sooting, high carbon monoxide risks, and irregular burner pressure. If you order a natural gas model, verify your supply line before setting the unit into the framing. Always check the rating plate on the chassis to confirm fuel type compatibility before lighting the pilot.

How does direct venting work on a 36-inch linear gas fireplace?

Direct vent systems use a sealed coaxial pipe that pulls combustion air from outdoors through the outer sleeve while exhausting flue gases through the inner pipe. This balanced exhaust design maintains indoor air quality because no room air is consumed for combustion. It allows horizontal venting directly through an exterior wall or vertical venting through the roof, depending on framing layouts. Make sure to maintain all manufacturer-specified clearances between the vent pipe and combustible wall studs.

Can you mount a flat-screen television directly above a Napoleon Ascent Linear Series 36 Direct Vent Gas Fireplace?

Yes, but only when you follow strict mantel depth and heat clearance guidelines to prevent damaging sensitive television electronics. Rising heat from the clean-face glass opening can overheat screens mounted too low on the wall. Installing a non-combustible mantel shelf or a protective firebox canopy helps deflect hot air away from electronics. Always consult the fireplace framing manual for minimum vertical spacing before drilling wall mounts.

Will a napoleon ascent linear series 36 direct vent gas fireplace operate during an electrical power outage in 2026?

Yes, models equipped with battery backup packs or millivolt ignition systems will light and provide heat even when household power fails. The electronic ignition control module switches to battery power automatically to spark the pilot flame. Wall switch controls and manual flame adjustments function normally during an outage, though optional electric blowers will stay offline without standard 120-volt current. Keep fresh backup batteries installed in the receiver pack every heating season so you are never caught unprepared.

Which replacement pilot assembly fits a 36-inch direct vent gas fireplace?

Compatibility depends strictly on the exact fireplace model number and fuel configuration, such as the WS-100-38 assembly for natural gas or WS-100-39 for propane. These side-mount SIT assemblies include the pilot tubing, thermocouple, thermopile, and ceramic spark electrode. Generic pilot units should never be installed unless part numbers match OEM specifications like 30200 or 700-088. If you want to enhance the interior view, consider adding approved decorative lava rock media or glowing glass designed specifically for linear burners.