Ages 18-24? Explore Prime for Young Adults and see if you are eligible

Direct vent gas systems demand exact component alignment to maintain clean combustion, dependable exhaust, and steady zone heat. Hearth owners maintaining a napoleon 28 park avenue direct vent gas fireplace often face worn thermocouples, pilot clogging, or ignition issues after seasons of continuous winter use. Sourcing replacement hardware requires verifying fuel types, mounting brackets, and venting integrity rather than relying on generic parts. While modern hearth setups might use a fireplace wall controller for electric convenience, sealed gas direct vent units need factory-spec pilot tubing, millivolt generators, and flame sensors.

Gas configurations differ strictly between natural gas and liquid propane setups, making precise part matching critical before ordering replacement assemblies or complete fireboxes. An exact component fit prevents gas leaks, weak pilot flames, and unexpected burner shutdowns during freezing weather. Evaluating manufacturer specifications, pilot brackets, and burner fittings helps keep your direct vent gas hearth running safely, comfortably, and reliably.

1
Best Seller

Napoleon WS-100-38 Natural Gas Pilot Assembly

Napoleon
9.9 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The Napoleon WS-100-38 Natural Gas Pilot Assembly is an OEM direct-fit replacement designed for side-mount installation in direct-vent gas fireplaces. It is best suited for homeowners and technicians looking to restore reliable natural gas pilot ignition using factory-spec 24-inch component leads.
Pros & Cons

Pros

  • Direct-fit OEM replacement engineered under Napoleon part number WS-100-38
  • Integrated 24-inch lead components allow easy routing to the gas valve manifold
  • Factory-configured specifically for direct-vent natural gas applications
  • Side-mount bracket matches original equipment mounting locations

Cons

  • Configured strictly for natural gas and cannot be used in propane systems without proper conversion
  • Requires verifying your specific Napoleon direct-vent fireplace model manual before purchase
  • Gas appliance servicing typically requires professional handling for leak checking and safe operation
Detailed Review

The Napoleon WS-100-38 Natural Gas Pilot Assembly is an OEM-specified replacement component designed for direct-vent gas fireplaces. Manufactured by Allparts Equipment to meet factory specifications, this pilot assembly is intended for homeowners, landlords, or maintenance technicians working to repair an existing direct-vent Napoleon fireplace that suffers from pilot lighting issues, loose connections, or worn ignition components.

This pilot assembly functions as the critical ignition and flame-sensing source within a natural gas fireplace system. Because it is specifically built for direct-vent natural gas applications, the orifice and burner hood are calibrated for standard natural gas delivery, avoiding the soot buildup or delayed ignition that can happen with mismatched fuel components. It features a side-mount design that positions the pilot flame properly against the main burner for smooth ignition cycles.

Construction details reflect durable black-finished metal housing and components sized to handle the continuous heat of an active direct-vent firebox. The overall package dimensions measure 8 x 2 x 5 inches, and the assembly is fitted with 24-inch components, providing ample reach for routing thermopile, thermocouple, or spark wiring down through the firebox base to the lower control valve area.

Installation requires access to the fireplace burner tray and gas valve manifold. The integrated side bracket aligns with existing screw locations on compatible direct-vent fireboxes, while the 24-inch lead lengths eliminate tension on the wiring during positioning. Working on fuel lines requires turning off the gas supply and ensuring leak-free connections according to the fireplace manufacturer's maintenance procedures.

A key consideration is fuel compatibility. This unit is strictly engineered for natural gas direct-vent fireplaces and is not compatible with liquid propane setups without explicit factory conversion kits. Additionally, because Napoleon produces diverse fireplace series with distinct mounting brackets and lead lengths, buyers should cross-reference part number WS-100-38 with their appliance's original user manual or parts list prior to purchase.

For homeowners maintaining an older or malfunctioning direct-vent Napoleon natural gas fireplace, the WS-100-38 assembly provides a dependable direct-fit solution. Its OEM specifications and pre-sized 24-inch components eliminate guesswork, making it a solid replacement choice to restore reliable seasonal heating and ambiance.

Replacement Compatibility

Confirming part numbers is essential before ordering gas fireplace hardware. The WS-100-38 assembly is designed specifically as an OEM replacement for compatible Napoleon direct-vent gas fireplaces. Check your fireplace model rating plate or owner manual to verify that WS-100-38 is listed under the replacement parts diagram.

This pilot assembly features a side-mounting bracket and 24-inch components. If your direct-vent fireplace uses a top-mount pilot bracket or requires longer leads to reach the gas valve, verify fitment against the appliance manufacturer specifications before starting installation.

Fuel & Venting

This pilot assembly is configured exclusively for direct-vent fireplaces fueled by natural gas. Natural gas and liquid propane operate at different manifold pressures and require different orifice sizes, meaning this pilot should never be installed on a propane system without certified conversion equipment.

Because direct-vent fireplaces utilize a sealed combustion chamber, proper pilot alignment and tight sealing around wiring penetrations are critical for maintaining draft integrity and safe combustion.

2
Editor's Pick

Lennox Superior H4080 Direct Vent Natural Gas

IHP Superior Lennox Hearth by Allparts Equipment
9.9 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The H4080 Natural Gas Pilot Assembly is an original-equipment replacement component designed for Lennox and Superior direct-vent fireplaces equipped with electronic ignition systems. It suits fireplace owners and technicians looking to restore reliable burner ignition using an exact-fit replacement part.
Pros & Cons

Pros

  • Direct OEM part number H4080 match for Lennox and Superior fireplace models
  • Integrated electronic ignition pilot with igniter simplifies component replacement
  • Configured specifically for natural gas direct-vent hearth appliances
  • Reliable solution for restoring spark and pilot function on compatible units

Cons

  • Engineered strictly for natural gas and incompatible with liquid propane systems without approved conversion
  • Requires exact part-number verification against the fireplace manual or appliance rating plate
  • Installation involves gas lines and electrical connections that generally require professional service
Detailed Review

The H4080 Lennox Superior Direct Vent Natural Gas Pilot Assembly is a specialized replacement component engineered for select direct-vent gas fireplaces. This part serves homeowners, property managers, and hearth service technicians who need to fix an unreliable ignition system on compatible Lennox and Superior gas appliances. Instead of considering an expensive firebox overhaul, installing the designated replacement pilot assembly restores proper ignition function.

Functionally, this pilot assembly is designed specifically for electronic ignition systems operating on natural gas. It houses both the pilot burner structure and the electronic igniter to deliver a dependable spark and establish the pilot flame necessary to ignite the main burner. Direct-vent hearth systems rely on exact flame placement and stable ignition within a sealed glass-front enclosure, making a proper replacement assembly essential for safe, everyday fireplace operation.

In terms of construction, the unit is distributed by Allparts Equipment for IHP Superior Lennox Hearth products under part number H4080. It features durable metal mounting hardware, an integrated electrode igniter, and factory-set orifice geometry designed for natural gas line pressure. Because it arrives as an integrated electronic ignition pilot assembly, technicians do not have to piece together separate ignition pins or mounting clips.

Installation and maintenance require careful alignment with factory procedures and local building codes. Because this assembly interfaces directly with the fireplace gas feed and electronic control module, the gas supply must be shut off and electrical power disconnected before service begins. Homeowners should plan to work with a licensed gas fitter or certified hearth professional to ensure leak-free fittings, secure wiring, and correct pilot flame rectification.

The most important consideration before ordering is verifying appliance compatibility. This component is strictly intended for natural gas systems and must not be installed on liquid propane setups. It is also engineered exclusively for electronic ignition direct-vent units and will not replace standing millivolt pilot assemblies or fit models from unrelated hearth manufacturers.

For owners of compatible Lennox or Superior gas fireplaces struggling with a pilot that fails to spark or stay lit, the H4080 natural gas pilot assembly provides a direct, reliable replacement. Checking the fireplace rating plate or parts manual to confirm part number H4080 ensures a smooth installation and dependable heat during cold weather.

Fuel & Venting

This pilot assembly is configured exclusively for natural gas (NG) applications. Natural gas and liquid propane operate at different line pressures and require distinct orifice sizes, meaning this part must not be connected to a propane supply without verified, manufacturer-approved conversion hardware.

Additionally, the H4080 assembly is built for direct-vent gas appliances, which draw outdoor air for combustion and exhaust flue gases outside through a sealed venting system. It is not suitable for vent-free, natural-vent, or B-vent fireboxes unless explicitly designated by the manufacturer.

Replacement Compatibility

Compatibility depends entirely on matching the manufacturer part number H4080 to your specific Lennox or Superior fireplace model. You can locate this information on the appliance rating plate, usually found behind the lower control louvers or inside the fireplace valve compartment.

Do not attempt to install this assembly on standing pilot (millivolt) fireplaces or units with continuous-match lighting. It is designed solely for electronic ignition controls that utilize an electronic spark igniter to light the pilot flame automatically.

3
Limited Time

WS-100-38 Direct Vent Natural Gas Pilot Assembly

Generic
9.9 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
This WS-100-38 natural gas pilot assembly is an aftermarket SIT side-mount replacement designed for compatible direct-vent gas fireplaces and Napoleon stoves. It includes the pilot tubing, spark electrode, thermocouple, and thermopile, making it a practical complete kit for homeowners and repair technicians troubleshooting pilot outage or ignition failure.
Pros & Cons

Pros

  • Includes every core ignition component: pilot hood, gas line, electrode, thermocouple, and thermopile
  • Matches an extensive list of direct-vent replacement part numbers across Napoleon and SIT systems
  • Cost-effective aftermarket alternative to purchasing individual flame sensors separately
  • Dedicated natural gas orifice setup ensures appropriate pilot flame pattern when installed in compatible appliances

Cons

  • Configured strictly for natural gas and cannot be used with propane systems without verified conversion components
  • As an unbranded replacement part, exact bracket alignment and connector threads must be matched against your existing unit prior to ordering
  • Working with gas lines and combustion components requires careful safety precautions or professional installation
Detailed Review

The WS-100-38 natural gas pilot assembly is an aftermarket replacement part engineered for direct-vent gas fireplaces, gas fireplace inserts, and freestanding gas stoves that utilize a side-mount SIT pilot bracket. This component is specifically aimed at existing gas fireplace owners, property managers, and repair technicians dealing with common pilot issues, such as a pilot flame that will not stay lit, weak millivolt output to the gas control valve, or a failed spark igniter.

In gas fireplace operation, the pilot assembly serves as the foundational safety and ignition hub. This particular unit includes the spark electrode for ignition, a thermocouple to keep the safety magnet open in manual valves, and a thermopile (generator) that produces the electrical current required to operate main burner valves and wall switches. When installed in compatible natural gas appliances, it produces the targeted pilot flame required to envelop both sensor probes while smoothly bridging the flame to the main burner tube.

The build consists of a durable metal side-mount bracket finished in silver, designed to hold the pilot hood, sensors, and ignition lead rigidly in place against combustion draft and thermal cycles. Because direct-vent fireboxes undergo repeated heating and cooling, the pre-crimped sensor leads, threaded thermocouple connection, and flexible aluminum pilot tubing provide standard mechanical connections that correspond to standard SIT gas train layouts.

Installation involves removing the glass door barrier of the direct-vent fireplace, disconnecting the old pilot tube and wiring leads from the gas valve, unbolting the side-mount bracket from the burner base, and securing this unit in the identical orientation. Because it replaces several individual components simultaneously, it eliminates the need to diagnose whether an ignition failure stems from a deteriorating thermocouple, an oxidized thermopile, or a cracked ceramic electrode insulator.

Important limitations center on fuel and mechanical fit. This pilot assembly is explicitly manufactured for natural gas fuel supplies and direct-vent setups; it must not be used on liquid propane systems without verified, appliance-approved conversions. Furthermore, while the manufacturer lists cross-compatibility with several part numbers including 30200, 700-088, 69L17, 904405, H3466, RPA020, WS100-38, 0199702, and 910-034, buyers should physically compare the mounting bracket configuration and pilot hood angle against their original equipment to verify a precise match.

Overall, this replacement pilot assembly offers a practical, budget-friendly repair solution when an existing Napoleon or SIT-equipped natural gas direct-vent fireplace suffers from pilot failure. For homeowners comfortable with gas appliance maintenance, or technicians seeking an all-in-one replacement package, it provides the essential components needed to restore reliable hearth heating without the expense of full burner replacement.

Replacement Compatibility

Compatibility verification is essential before purchasing replacement gas fireplace components. This SIT side-mount pilot assembly is listed to replace OEM part numbers 30200, 700-088 (700088), 69L17 (69L1701, 69L17_0), 904405, H3466, RPA020, WS-100-38 (WS100-38), 0199702, and 910-034.

It is commonly matched to select Napoleon gas burning stoves and direct-vent gas fireplaces utilizing standard side-mounting SIT pilot brackets. Buyers should check their appliance rating plate, owner manual, or existing pilot bracket geometry to confirm that both the mounting footprint and the natural gas designation match before beginning repairs.

Fuel & Venting

This pilot assembly is designated exclusively for natural gas direct-vent appliances. Natural gas and liquid propane operate at different line pressures and require specific orifice dimensions to maintain correct air-fuel combustion, meaning this assembly cannot be installed in propane fireplaces without factory-approved adjustments.

Because direct-vent fireplaces operate with sealed combustion chambers, maintaining an airtight firebox seal and leak-free gas connections after installing this pilot assembly is mandatory for safe operation. A gas leak test should always be performed on all fittings prior to reigniting the appliance.

4
Top Rated

Napoleon WS-100-39 Propane Gas Pilot Assembly

Napoleon
9.8 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The Napoleon WS-100-39 is a dedicated replacement propane gas pilot assembly engineered for compatible Napoleon direct-vent fireplaces utilizing a side-mount configuration. It is an ideal fix for homeowners and technicians seeking to restore reliable ignition and stable pilot flame performance on LP-fueled direct-vent hearth systems.
Pros & Cons

Pros

  • Genuine Napoleon part engineered to match factory side-mount specifications and alignment
  • Configured specifically for liquid propane direct-vent fireplace installations
  • Complete assembly format simplifies swapping out aging, corroded, or malfunctioning pilot parts
  • Restores consistent pilot flame generation and smooth main burner ignition

Cons

  • Restricted exclusively to propane gas systems and cannot be used for natural gas configurations
  • Requires fireplace owners to verify part number WS-100-39 against their specific model manual prior to purchase
  • Gas supply line connection typically requires installation by a qualified service professional
Detailed Review

The Napoleon WS-100-39 Propane Gas Pilot Assembly is an authentic replacement part designed specifically for select Napoleon direct-vent gas fireplaces fueled by liquid propane (LP). This complete assembly is intended for homeowners, property managers, and hearth technicians who need to resolve recurring pilot outages, weak ignition flames, or worn thermocouple and thermopile components on an existing side-mounted pilot bracket.

As an essential ignition component, this pilot assembly delivers the steady pilot flame required to safely ignite the main gas burner and energize the millivolt safety circuit. Because the assembly is factory-configured for liquid propane, the internal orifice is sized precisely for propane operating pressures. In sealed direct-vent fireplaces, having an exact-fit pilot assembly is vital for maintaining balanced combustion airflow and dependable flame-sensing operation.

Constructed with durable metal brackets and high-temperature ignition leads, the unit features a classic black bracket finish and measures approximately 8 by 2 by 5 inches with an overall weight of roughly 0.81 pounds. The side-mount design matches designated Napoleon firebox footprints, keeping the pilot hood and flame sensor positioned at the correct angle relative to the burner ports for smooth flame transfer.

Installing this side-mount pilot assembly requires accessing the lower firebox, shutting off the gas supply, and disconnecting the pilot tubing and wiring harnesses from the gas control valve. Because this replacement component connects directly to a pressurized gas line inside a sealed combustion chamber, leak testing is mandatory, and installation by a qualified gas technician or certified hearth professional is strongly recommended.

The main limitation of this assembly is its strict fuel and mounting specificity. It is engineered exclusively for liquid propane direct-vent models and cannot be adapted for natural gas systems without proper manufacturer conversion hardware. Furthermore, the side-mount bracket will not work in Napoleon fireplaces requiring a top-mount or rear-mount pilot bracket. Buyers should inspect their fireplace rating plate and owner manual schematics to verify that part number WS-100-39 matches their appliance requirements.

For owners of compatible Napoleon direct-vent propane fireplaces struggling with ignition failure or an uncooperative pilot flame, the WS-100-39 pilot assembly provides a direct, cost-effective replacement. It restores reliable pilot operation and burner ignition without the expense of replacing the entire fireplace burner assembly.

Fuel & Venting

The Napoleon WS-100-39 is engineered strictly for liquid propane (LP) applications. Propane operates under significantly higher manifold pressure than natural gas and requires a smaller pilot orifice to ensure clean, safe combustion. This assembly should never be connected to a natural gas line.

Direct-vent fireplaces utilize a completely sealed combustion chamber that draws fresh air from outdoors and vents exhaust outside through dedicated venting pipe. Maintaining an exact factory-spec pilot assembly inside this sealed environment ensures that draft pressures remain balanced and the pilot flame does not pull away from the sensor during operation.

Replacement Compatibility

Compatibility for the Napoleon WS-100-39 relies on three critical factors: brand, fuel type, and mounting geometry. This component is designed specifically for Napoleon direct-vent gas fireplaces that use liquid propane and call for factory part number WS-100-39.

Before ordering, check the user manual or exploded parts diagram on the appliance data plate located inside your fireplace control compartment. Verify that your unit utilizes a side-mount pilot bracket rather than a rear or bottom bracket, as bracket styles are not interchangeable across different firebox designs.

5

Comfort Glow GFD3840T Vent-Free Gas Fireplace

Comfort Glow
9.8 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The Comfort Glow GFD3840T is a vent-free dual-fuel gas fireplace paired with a Pewter Oak mantel, delivering up to 26,000 BTUs of supplemental heat for spaces up to 900 square feet without requiring a chimney or household electricity. It is an ideal fit for homeowners seeking dependable backup heat and traditional hearth ambiance with the flexibility of natural gas or liquid propane.
Pros & Cons

Pros

  • Dual-fuel flexibility allows switching between natural gas and liquid propane hookups
  • Reliable supplemental heat source that functions completely without electricity during outages
  • Freestanding mantel cabinet design creates an instant hearth focal point without masonry work
  • Integrated thermostat dial simplifies heat output and room comfort management

Cons

  • Vent-free gas appliances are prohibited or restricted by building codes in certain regions and room types
  • Circulation blower is not included and must be purchased separately if active airflow is desired
  • Requires professional gas-line installation and verification of minimum room-size clearances
Detailed Review

The Comfort Glow GFD3840T is a freestanding vent-free gas fireplace suite featuring an integrated Pewter Oak mantel, engineered for homeowners seeking powerful supplemental heat without installing a chimney or exterior flue. Rated at 26,000 BTUs, this heating appliance is well suited for primary living rooms, finished family spaces, or open floor plans up to 900 square feet where no existing fireplace infrastructure exists. Because it operates on dual-fuel engineering, it easily accommodates households plumbed for utility natural gas as well as rural or suburban homes using exterior liquid propane storage.

Heating performance centers on a 99.9% fuel-efficient burner system that generates substantial radiant and convective warmth while requiring zero household electricity. This off-grid capability makes the unit a practical heating safeguard during winter storms and grid power outages. The system integrates an adjustable thermostat control dial alongside a battery-assisted electric igniter, allowing users to initiate the burner with a single push and maintain consistent room temperatures throughout the colder seasons.

Surrounding the firebox is a pre-finished wooden mantel in a transitional Pewter Oak finish, delivering the traditional aesthetic of a built-in hearth without the structural expense of custom masonry. Measuring 16 inches deep, 38.75 inches wide, and 38 inches tall, the cabinet presents a balanced, grounded profile against standard flat walls. The internal firebox and burner setup are built to operate cleanly within standard vent-free guidelines, though buyers seeking active heat distribution across expansive layouts will need to acquire the optional circulation blower (model 20-6140) as a separate accessory.

Setup and assembly involve straightforward furniture construction combined with precise fuel-line planning. While the exterior mantel comes ready to assemble using standard hand tools, the gas connection must comply strictly with local plumbing codes, fuel pressures, and ventilation guidelines. Prospective owners should verify that the selected installation room meets the necessary cubic-foot volume requirements for an unvented 26,000 BTU appliance, and utilizing a certified gas technician is strongly advised to ensure tight fittings and proper fuel selection.

A critical consideration for prospective buyers involves regional code restrictions and room-specific suitability. Vent-free appliances discharge combustion warmth and moisture directly into the living space, which means certain state codes, local municipalities, and specific living areas such as small bedrooms or tightly sealed rooms restrict or forbid their use. Buyers should confirm local ordinances prior to ordering, install appropriate carbon monoxide and smoke alarms, and note that active fan-driven airflow requires an additional equipment purchase.

For homeowners wanting an attractive, high-output supplemental heating solution that remains completely functional when electrical service fails, the Comfort Glow GFD3840T provides strong utility and classic style. Its dual-fuel capability, generous 900-square-foot heating coverage, and self-contained mantel design make it a dependable heating upgrade for properly sized, code-compliant living areas.

Fuel & Venting

This Comfort Glow fireplace features a dual-fuel burner capable of operating on either natural gas or liquid propane, providing valuable flexibility depending on your home fuel infrastructure. Because it is engineered with a 99.9% efficient vent-free design, it operates without an exhaust chimney, exterior flue, or direct vent pipe.

Prospective buyers must verify that vent-free gas appliances are permitted by local building codes in their municipality and specific room type before purchasing. Adequate fresh air makeup and room volume must be maintained according to manufacturer specifications to ensure clean, balanced combustion.

Heating Output & Controls

With a maximum output of 26,000 BTUs, the GFD3840T is rated to heat spaces up to 900 square feet. The mechanical thermostat system allows users to set and maintain desired room temperatures without continuous manual adjustment, automatically regulating heat delivery to prevent overheating.

Startup is handled via an electric igniter and simple one-button push control. Because the heating mechanism does not require line-voltage electrical power, the unit will continue delivering full supplemental heat during winter storms and electrical outages. An optional electric blower fan (model 20-6140) can be added to circulate warmth more rapidly through larger rooms.

Dimensions & Installation

The assembled mantel and fireplace cabinet measures 16 inches deep, 38.75 inches wide, and 38 inches tall, presenting a compact yet substantial footprint suitable for living room focal walls. The unit is designed for flat-wall placement and comes ready to assemble with included hardware.

Installation requires connection to an appropriate natural gas line or regulated liquid propane supply. Always ensure that combustible clearances specified in the manufacturer instruction manual are maintained around the mantel cabinet, and retain a licensed professional for all gas plumbing and leak testing.

6

SIT Controls 0199724 OEM Natural Gas Pilot

Sit Controls by Allparts Equipment
9.7 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The SIT 0199724 is an authentic OEM CSA-certified natural gas pilot assembly designed for direct-vent fireplaces, freestanding stoves, and gas log sets. It is the best choice for homeowners and repair technicians seeking a factory-grade replacement to resolve pilot ignition failures and ensure safe operation.
Pros & Cons

Pros

  • Genuine OEM manufacturing avoids the fitment and flame stability issues common to generic aftermarket copies.
  • CSA safety listing confirms rigorous evaluation against fire, gas leak, and combustion risks.
  • Pre-tested construction helps guarantee a functional pilot flame right out of the box.
  • Backed by experienced USA-based technical assistance through Allparts Equipment.

Cons

  • Configured strictly for natural gas appliances and cannot be used in propane setups without proper conversion.
  • Requires cross-referencing your fireplace model number and owner manual before ordering to ensure correct bracket match.
  • Safe installation typically requires a licensed gas technician or experienced hearth professional.
Detailed Review

The SIT 0199724 OEM Natural Gas Pilot Assembly is a factory-original replacement component designed to restore reliable ignition in direct-vent gas fireplaces, freestanding stoves, heaters, and gas log sets. Distributed by Allparts Equipment, this assembly is engineered specifically for homeowners, property managers, and service technicians facing pilot light outages, weak pilot flames, or main burner startup failures on SIT-equipped hearth appliances. Choosing an authentic SIT Controls part ensures factory-calibrated flame geometry that aftermarket generic components often fail to match.

In direct-vent gas hearth appliances, a dependable pilot assembly is critical for safe burner ignition and continuous operation. This component delivers the exact pilot flame pattern required to properly envelop the safety sensors, signaling the main gas valve to open smoothly. Because it is calibrated strictly for natural gas, it maintains the appropriate gas flow and air mixture to prevent sooting, flame lifting, or nuisance outages during regular heating cycles in family rooms and living areas.

Construction quality aligns with strict OEM manufacturing standards and is backed by official CSA certification. The Canadian Standards Association mark confirms that the assembly has passed demanding safety evaluations covering hazards such as gas leaks, structural degradation, and explosion risks. Rigorous pre-packaging inspection by the manufacturer further minimizes the likelihood of receiving a defective component, giving buyers peace of mind when repairing closed-combustion fireboxes.

Installation requires careful alignment with the appliance manufacturer guidelines and original equipment documentation. Because delicate pilot tubes, gas fittings, and electrical leads are involved, the part demands careful handling to avoid kinking supply lines or damaging thread connections. Due to the inherent safety considerations of working with residential gas lines, homeowners should verify their appliance manual and rely on a qualified gas fitter or hearth technician to complete the installation and perform necessary leak testing.

A primary consideration for buyers is verifying fuel type and specific part cross-references before ordering. This assembly is designed exclusively for natural gas systems and cannot be installed in liquid propane setups. Furthermore, while the SIT 0199724 and related reference number 0.199.702 are widely used across multiple hearth brands, bracket configurations and wire lead lengths can vary by fireplace model, making a direct check of your appliance manual essential before purchasing.

For property owners troubleshooting an unreliable natural gas fireplace or servicing an older direct-vent heating stove, the SIT 0199724 OEM Pilot Assembly offers a dependable, certified solution. With authentic OEM tolerances and USA-based technical support from Allparts Equipment, it delivers the safety, compatibility, and durability needed to bring warmth and comfort back to your hearth.

Replacement Compatibility

Before ordering this pilot assembly, verify the exact part number listed in your fireplace, stove, or heater owner manual. The SIT 0199724 (also referenced under SIT 0.199.702) is widely utilized by numerous direct-vent gas appliance manufacturers, but physical brackets, tube bends, and sensor orientations vary across specific firebox designs.

This pilot assembly is configured strictly for natural gas (NG) applications. It is not compatible with liquid propane (LP) systems, as orifice sizing and gas pressure requirements differ significantly between fuel types. Ensure your appliance fuel supply matches the natural gas designation of this assembly.

Safety & Support

This pilot assembly holds CSA certification, confirming that the component has undergone thorough evaluation to meet North American safety standards against gas leaks, structural failure, and fire hazards. CSA testing ensures that replacement parts perform with the same reliability as original factory equipment.

Distribution is handled by Allparts Equipment & Accessories in Southwest Michigan, providing buyers with access to USA-based technical support. While technical guidance is available for product identification, all gas line connections, burner repairs, and pilot installations should follow local building codes and be completed by a qualified hearth professional.

7

IHP Lennox Superior 69L18 Propane Gas Pilot

Allparts Equipment & Accessories
9.6 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The IHP Lennox Superior 69L18 is an authentic OEM propane gas pilot assembly designed specifically for direct-vent gas fireplaces equipped with SIT control systems. It is the ideal replacement part for homeowners and service technicians needing to restore reliable pilot ignition on compatible IHP, Lennox, or Superior hearth appliances.
Pros & Cons

Pros

  • Authentic OEM component built for SIT controls rather than a generic aftermarket copy
  • Exact fit for specified IHP, Lennox, and Superior direct-vent propane systems
  • Compact factory dimensions ensure proper alignment on the burner pan pilot bracket
  • Restores dependable ignition and flame sensing for reliable fireplace start-ups

Cons

  • Configured strictly for propane gas and cannot be used in natural gas installations without proper modification
  • Installation involves gas lines and sealed direct-vent assemblies, often requiring professional service
  • Compatibility is model-specific and requires checking appliance manuals to verify part number 69L18
Detailed Review

The IHP Lennox Superior 69L18 is an original equipment manufacturer (OEM) propane gas pilot assembly designed specifically for direct-vent fireplaces utilizing SIT control valves. This component is tailored for existing fireplace owners, property managers, and hearth technicians who need a direct factory replacement to resolve pilot outage, weak pilot flame, or ignition failure in compatible gas hearth units.

Engineered for dedicated liquid propane (LP) setups, this assembly delivers the precise gas flow and flame pattern required to heat the safety sensors and reliably ignite the main burner. Because it is manufactured as an authentic OEM assembly for SIT controls rather than an untested universal copy, it maintains factory flame geometry and stable millivolt generation for smooth fireplace operation.

Construction quality matches original factory specifications, featuring durable metallic tubing, a precision-machined propane orifice, and robust ignition lead wiring packaged within a compact 2 x 3 x 3-inch footprint. The standardized mounting bracket ensures proper distance from the main burner port, which helps prevent delayed ignition and reduces soot buildup around the pilot hood.

Installation requires accessing the sealed firebox of a direct-vent appliance and disconnecting both the pilot gas supply line and electrical leads from the SIT valve. Due to the critical safety requirements of gas tightness and proper combustion air sealing on direct-vent systems, verification of gas connections and adherence to local mechanical codes are essential during replacement.

A notable limitation of this assembly is its strict fuel and system dependency. It is designed solely for propane gas and will not function correctly on natural gas systems; additionally, it is meant only for appliances configured with SIT controls matching part number 69L18. Buyers must cross-reference their fireplace rating plate and parts list before ordering to ensure full compatibility.

For homeowners and technicians maintaining a compatible Lennox, Superior, or IHP direct-vent propane fireplace, this genuine 69L18 pilot assembly provides dependable factory-grade performance. It eliminates the guesswork of aftermarket retrofits and restores consistent, safe ignition to your living-room zone heat source.

Replacement Compatibility

This pilot assembly directly replaces OEM part number 69L18 for direct-vent gas fireplaces manufactured under the IHP, Lennox, and Superior brand names. It is engineered specifically for units that utilize SIT control systems.

Because gas fireplace components are not universal, buyers must verify their fireplace model number, fuel type, and existing gas valve brand on the appliance rating plate or user manual prior to purchase.

Fuel & Venting

This component is calibrated exclusively for liquid propane (LP) direct-vent gas fireplaces. It features a propane-specific pilot orifice designed to operate at standard propane manifold pressures.

Propane and natural gas pilot assemblies are not interchangeable. Attempting to use this propane assembly on a natural gas supply without authorized conversion will result in improper combustion and potential safety hazards.

8

Napoleon Ascent B36 Direct Vent Clean Face Natural

AMS FIREPLACE INC.
9.5 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The Napoleon Ascent B36 (SKU: B36NTRE-1) is a direct-vent natural gas fireplace featuring a clean-face design, realistic PHAZER log set, and an electronic ignition with backup power-failure controls. It is an ideal built-in solution for homeowners and remodelers seeking a reliable, permanent gas hearth for living rooms or media spaces.
Pros & Cons

Pros

  • Louver-free clean face profile provides a modern look that integrates smoothly with custom hearth surrounds
  • Battery-backed control system provides dependable heat during winter storms and electrical power cuts
  • Adjustable flame and heat output lets you balance ambiance and supplemental warmth as conditions change
  • Exclusive PHAZER logs and glowing ember bed deliver an authentic wood-fire look without the mess of firewood

Cons

  • Configured specifically for natural gas; using liquid propane requires verifying a compatible conversion kit
  • Requires professional direct-vent pipe routing, custom framing, and licensed gas line installation
  • Product listing does not detail exact framing dimensions or BTU ratings, requiring verification with the manufacturer manual
Detailed Review

The Napoleon Ascent B36 (model B36NTRE-1) is a built-in direct-vent natural gas fireplace designed for homeowners, builders, and remodelers seeking an attractive, permanent hearth centerpiece. Styled with a clean-face frame that eliminates exterior metal louvers, this unit allows finishing materials like stone, tile, or drywall to frame right up to the firebox. It best suits property owners planning a permanent living room, family room, or media space installation connected to a residential natural gas line.

Burner performance and visual ambiance center on Napoleon's pan-style burner, which distributes gas evenly under the exclusive PHAZER log set and glowing ember bed. The included logs and ember media replicate the warm, organic glow of real firewood without requiring any ash disposal or chimney cleaning. Thanks to the built-in flame and heat adjustment controls, you can decrease the flame height on warmer evenings or increase output when supplemental comfort is needed.

For everyday operation, the electronic ignition system provides straightforward, energy-conscious startups without keeping a standing pilot flame running constantly. A critical advantage of this control layout is the backup power system, which maintains functionality during electrical blackouts. For homeowners in cold-weather regions vulnerable to winter storm outages, this feature provides practical peace of mind by keeping an active heat source operational when the main grid fails.

Because the B36 Ascent is a direct-vent appliance, it operates within a sealed combustion loop, bringing in fresh outside air for burning while safely expelling exhaust outdoors via direct-vent pipe. Planning the installation requires proper rough-framing cutouts, gas supply line plumbing, and appropriate vent pipe clearances through an exterior wall or roof. Due to the technical nature of gas lines and sealed venting, installation should be handled by a licensed professional following local building and mechanical codes.

Buyers should keep in mind that this unit is dedicated to natural gas use, and any potential conversion to liquid propane requires verifying the availability of an approved conversion kit before purchase. Additionally, exact framing dimensions, clearances to combustibles, and specific BTU ratings are not detailed in the raw listing data and must be verified in Napoleon's official product documentation before framing begins.

For remodelers and homeowners looking for a reputable direct-vent gas fireplace that blends clean architectural lines with emergency power-outage readiness, the Napoleon Ascent B36 delivers dependable warmth and a classic fire view.

Fuel & Venting

The Napoleon Ascent B36 (SKU: B36NTRE-1) is factory-configured to run on natural gas and requires a dedicated gas supply line. Direct-vent technology uses a co-axial or co-linear sealed pipe system that pulls fresh combustion air from outside the home while venting combustion gases directly outdoors, protecting indoor air quality.

Because venting routes must conform to strict horizontal and vertical length limits specified by the manufacturer, buyers should verify framing depth, chase clearances, and exterior termination locations with a certified gas professional prior to installation.

Flame & Controls

This fireplace utilizes an electronic ignition mechanism paired with a pan-style burner for smooth, reliable ignition. Inside the sealed combustion chamber, Napoleon's PHAZER log set and glowing ember bed create a natural flame pattern with realistic depth and glow.

Flame and heat adjustment controls allow users to tailor both the flame height and heating output to match room comfort requirements. An integrated backup control system ensures that the fireplace remains functional during electrical outages, delivering dependable heat when household power is lost.

Essential Direct Vent Gas Fireplace Answers

How do you know if a pilot assembly fits a Napoleon 28 Park Avenue Direct Vent Gas Fireplace?

Check the exact part number and fuel type listed in your appliance manual. Direct vent units like the Napoleon 28 Park Avenue Direct Vent Gas Fireplace rely on side-mount pilot brackets with designated thermocouple, thermopile, and electrode lengths. A natural gas pilot cannot run safely on liquid propane without the proper orifice. Always cross-reference OEM part numbers such as WS-100-38 or certified SIT Controls components to ensure a safe gas seal.

Can you convert a natural gas pilot assembly to propane for this fireplace?

No, you cannot safely run a natural gas pilot on propane without an approved manufacturer conversion orifice. Liquid propane operates under higher delivery pressure and requires a much smaller orifice than natural gas. Operating the wrong pilot orifice causes heavy soot buildup and hazardous gas accumulation. Purchase a dedicated propane assembly like the WS-100-39 to ensure safe operation.

What is the difference between direct vent and vent-free gas fireplaces?

Direct vent fireplaces pull combustion air from outdoors and vent exhaust outside through a sealed pipe. Vent-free appliances draw indoor room air and exhaust directly into the living space. Direct vent units maintain a sealed glass front to isolate indoor air completely. For outdoor fire features, options like decorative fire table stones follow separate burner clearances.

Why does the pilot light go out immediately after releasing the control knob?

A worn or misaligned thermocouple is the main reason a pilot goes out when you release the knob. The pilot flame must engulf the thermocouple tip to generate the millivolts needed to hold the internal gas valve open. Carbon buildup, loose wiring, or a failing sensor prevents proper voltage flow. Cleaning the sensor or replacing the pilot assembly resolves this issue for 2026 setups.

Do direct vent gas fireplaces require routine hearth maintenance?

Yes, annual inspection of the burner ports, pilot assembly, and glass gasket ensures proper operation. While wood hearths need ash cleanup with a durable fireplace tool set, gas fireplaces require checking millivolt connections and clearing lint from the pilot hood. Ensuring a tight ceramic glass gasket prevents exhaust from leaking into the living area.

Can direct vent gas units operate during a home power outage?

Yes, direct vent models with standing pilot millivolt systems function normally during a power failure. The thermopile generates adequate electrical current directly from the pilot flame to operate the main gas valve switch. Optional circulation blowers and modern electronic ignition setups will need backup battery packs or grid power to circulate forced air.