Ages 18-24? Explore Prime for Young Adults and see if you are eligible

Trapped heat inside a firebox cavity does little good when warm air never circulates into your room. Installing a reliable Majestic 160 Cfm Fireplace Fan pushes captured warmth across your living space, turning passive radiant heat into active convection. Gas fireplace owners often discover that while the glass gets scorching hot, distant seating areas stay chilly. Convection blowers pull cooler air beneath the firebox and push heated airflow forward. You can also pair airflow upgrades with heat distribution accessories to balance temperatures across adjoining zones.

Selecting the right blower motor replacement requires careful attention to physical dimensions, wiring harnesses, and thermostatic controls. Quality replacement units rated at 160 CFM fit various Majestic, Heatilator, and Quadra-Fire chassis, but clearance under the firebox is critical. Some kits supply a magnetic thermostat sensor and a rheostat speed control, while bare kits provide only the motor. Checking your model number and cavity depth ensures quiet operation and reliable warmth during cold winter stretches.

1
Best Seller

Aibabcue GFK-160A Fireplace Blower Fan Kit

Aibabcue
9.7 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The Aibabcue GFK-160A Blower Fan Kit is an aftermarket 160 CFM replacement blower that circulates warm air from compatible gas fireplaces directly into the living space. It is best suited for homeowners looking to improve room heat distribution on compatible Heat N Glo, Superior, Quadra-Fire, and Heatilator models.
Pros & Cons

Pros

  • Complete all-in-one replacement package with variable speed switch, magnetic thermostat, and 115V power cord
  • Automatic thermal switch eliminates the need to manually power the fan on or off during fireplace operation
  • Rubber dampening feet isolate the blower assembly to minimize metal-on-metal vibration noise
  • High 160 CFM airflow rating helps move warm air away from the chassis and out into the room

Cons

  • Product specifications list placeholder 1 x 1 x 1 inch exterior dimensions, requiring buyers to measure their existing cavity before ordering
  • Requires an accessible 115V grounded electrical receptacle inside the lower fireplace access area
  • Running the motor at its maximum 2700 RPM speed can create audible fan noise in quieter rooms
Detailed Review

The Aibabcue GFK-160A Blower Fan Kit is a specialized aftermarket convection air blower designed for factory-built gas fireplaces. Rather than letting heated air remain trapped behind the fireplace surround or within the lower and rear heat exchangers, this blower pulls ambient room air through the bottom louvers, routes it across the exterior of the hot firebox, and expels it into the living space. It is an ideal upgrade for homeowners seeking improved room comfort from compatible Heat N Glo, Superior, Quadra-Fire, Heatilator, or Majestic fireplaces without altering the primary gas combustion system.

Operational performance centers on an efficient 115-volt, 60-watt motor capable of producing up to 160 CFM of convective airflow at 2700 RPM. A significant benefit of this specific kit is its automated temperature control. The included magnetically mounted thermostat snap disc attaches directly to the underside or back wall of the firebox. It is calibrated to turn the blower motor on when chassis temperatures reach approximately 120°F (+/- 5°F tolerance) and shut off once the fireplace cools below approximately 90°F. This prevents the fan from circulating unheated air while the firebox is warming up or after the flames have been extinguished.

In terms of build quality, the blower utilizes a 100 percent sealed ball-bearing motor assembly intended to resist dust accumulation and handle elevated temperatures within the fireplace lower compartment. To manage operational sound, the housing includes rubber isolation feet that separate the spinning metal components from the fireplace floor pan. While running the blower at full speed will produce typical rushing air sounds, the included rheostat variable speed dial gives users manual control over the exact balance between thermal circulation and acoustic preference.

Installation is relatively straightforward for owners comfortable working inside the bottom access opening of a gas fireplace. The kit is supplied pre-wired with a standard 3-prong grounded plug, a wire harness, the magnetic thermostat, and the rheostat speed controller. Homeowners must verify that a powered 115V electrical junction box or outlet is present in the lower cavity. The magnetic snap switch adheres without drilling, and the rubber feet hold the fan in place through gravity and friction, simplifying routine removal for cleaning and vacuuming seasonal dust.

Potential buyers should be aware of a few practical limitations. The product listing lists placeholder dimensions of 1 x 1 x 1 inches, so buyers must physically check their fireplace manual or measure the lower cavity and original blower before ordering. While cross-referenced for dozens of models across brands like Heat N Glo, Superior, and Quadra-Fire, it is not a universal kit for every fireplace brand or non-listed chassis size. Additionally, this accessory solely moves warm air and does not generate heat or modify burner output.

For owners of compatible factory-built fireplaces experiencing poor heat distribution or replacing a noisy, failed OEM blower, the Aibabcue GFK-160A kit offers a practical and budget-conscious solution. Its combination of an automatic thermal switch, sealed bearings, and variable speed adjustment makes it a functional replacement part for maximizing supplemental zone heating.

Replacement Compatibility

Cross-referencing part numbers and verifying internal cavity clearances is essential before purchasing this replacement blower. The Aibabcue GFK-160A kit is designed to replace factory part numbers GFK-160, GFK-160A, and GFK-160B, as well as OEM references including Heat N Glo 7002-1241, 7002-2944, 7102-2944, 7002-2311, 7002-2143, 7002-1615, 7102-1615, 7002-2152, 7102-2152, and 7058-1221. It also matches aftermarket cross-references such as Royal GFK-160, Rotom HB-RB168, R7-RB168, Regency 846515, 490-917, Fasco A133, 45KC49, and UPPCO 1601881.

Supported fireplace models include Heat N Glo units such as the 4000GDV, 4000TV, 5000GDV, 5000TV, 6000CBV, 8000CBV, 8000CF, 8000CL, 8000CLX, 8000 DVTFL, PierTRC, STTRC, LCornerTRC, RCornerTRC, ST36TR, ST36TRLP, and PIER36TR. Compatible Superior models include CF5500CMN, CF5500CMP, CF6500CMN, CF6500CMP, CFPFCMN, VF4000CHN2, VF4000CHP2, VF4000CMN2, and VF4000CMP2. Compatible Quadra-Fire models include 7100FP-BK-B, 7100FP-GD-B, 7100FP-NL-B, QFP38-LP, QFP38-NP, QFP44, QV32, QV32A, QV32B, QV32B-A, and QV36.

Blower & Fan

The core mechanism is a 115-volt alternating current motor rated at 60 Hz and 60 watts of power consumption. The fan assembly generates up to 160 CFM of forced air at a maximum rotational speed of 2700 RPM, which helps circulate air around the exterior walls of the metal firebox.

Airflow volume can be adjusted smoothly using the included rheostat dial. The motor is equipped with sealed ball bearings to prevent premature mechanical wear caused by ambient room dust and warm under-chassis operating temperatures. Noise reduction rubber isolation feet are positioned at the base of the frame to isolate operational resonance from the sheet-metal chassis.

Installation & Wiring

The kit arrives pre-wired to simplify setup, including a standard 3-prong electrical cord that plugs directly into a standard 115V grounded wall or fireplace junction box. The wiring harness connects the motor, the rheostat speed controller, and the magnetic thermostat snap disc.

The magnetic thermostat switch attaches directly to the metal underside or rear wall of the firebox where heat conducts rapidly. Wiring must be kept neatly tucked away from sharp chassis edges and clear of direct burner flames or excessive heat zones. Because physical dimensions in the listing are placeholders, owners should measure their existing blower opening and compare clearance around gas lines and control valves prior to installation.

2
Editor's Pick

Criditpid GFK-160A Fireplace Blower Fan Kit

Criditpid
9.6 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The Criditpid GFK-160A Fireplace Blower Fan Kit is a dual-blower heat-circulation assembly designed to replace or upgrade factory blowers in compatible Heat N Glo, Quadra-Fire, and Heatilator fireplaces. Delivering 160 CFM of airflow with an automated magnetic thermostat and rheostat variable-speed control, it is an ideal retrofit for fireplace owners wanting to push trapped convective heat out into living spaces.
Pros & Cons

Pros

  • Complete kit with pre-wired harness, magnetic thermostat, rheostat dial, and 83-inch power cord.
  • Dual sealed ball bearings and Class H insulation (392°F) support high-heat longevity.
  • Hands-free magnetic snap thermostat automatically cycles the fan on at 120°F and off at 90°F.
  • Rubber mounting feet reduce vibration noise against the sheet-metal firebox floor.
  • Direct fit for multiple major brands including Heat N Glo, Quadra-Fire, and Heatilator.

Cons

  • Requires manual clearance measurement in the fireplace lower cavity prior to ordering.
  • Requires a functional 120V grounded electrical outlet located inside or adjacent to the fireplace lower compartment.
  • Running the motor at maximum 3000 RPM setting can produce noticeable air movement sound.
Detailed Review

The Criditpid GFK-160A Fireplace Blower Fan Kit is an aftermarket convection-fan assembly designed for homeowners seeking to improve room-level heat circulation from compatible factory-built gas and wood fireplaces. Built to replace or add onto equipment from brands such as Heat N Glo, Quadra-Fire, Heatilator, Superior, and Majestic, this complete blower kit is ideal for users whose fireplaces generate high firebox temperatures that otherwise remain trapped behind louvers or sheet metal.

Air movement is generated by a dual-squirrel-cage blower system capable of producing up to 160 CFM of airflow at 3000 RPM, discharged through twin 4.75-inch air outlets. Operation is automated by an included magnetic snap-disc thermostat that engages the fan once the firebox reaches approximately 120 degrees Fahrenheit and cuts power when the firebox cools down to 90 degrees Fahrenheit. For customized comfort, an inline rheostat rotary switch allows users to dial in continuous fan speed between low and high settings.

Construction features sealed ball bearings on both the motor and outboard positions to reduce mechanical friction and ensure balanced rotation over long heating cycles. The motor windings carry a Class H insulation rating certified up to 392 degrees Fahrenheit, offering the necessary thermal protection required inside compact, high-heat fireplace cavities. Rubber mounting feet are affixed to the base to dampen rotational vibration against sheet-metal fireplace floors, helping minimize chassis resonance.

Installation utilizes a pre-wired harness that simplifies electrical connections, ending in a standard 83-inch, 3-prong grounded plug. The unit operates on standard 120V, 60 Hz electrical service drawing 1.3 amps. The overall dimensions measure 12 13/16 inches in length, 4 5/16 inches in width, and 4 5/16 inches in height, fitting into the lower mechanical service access space found under the floor of compatible fireboxes.

Prospective buyers should verify that their fireplace model has sufficient physical clearance in the lower compartment before ordering, as gas supply lines, valve assemblies, or control modules can reduce available space. Additionally, this kit relies on an accessible, powered 120-volt outlet within reach of the 83-inch power cord to function, which may require checking your fireplace's internal junction box wiring.

For owners of compatible Heat N Glo, Quadra-Fire, Heatilator, or Majestic fireplaces wanting to push warm air across a living room or family room without paying OEM equipment prices, the Criditpid GFK-160A offers a dependable, fully equipped solution. Its combination of dual ball bearings, high-temperature Class H motor insulation, and automated thermal cycling provides a reliable way to optimize home zone heating.

Blower & Fan

The GFK-160A features a dual-wheel blower layout that produces up to 160 CFM of circulating airflow at an operating speed of up to 3000 RPM. Dual 4.75-inch air discharge ports direct convective air upward and around the outer firebox mantle louvers.

Mechanical performance relies on sealed ball bearings installed at both the motor and outboard bearing locations to maintain balance, reduce resistance, and resist thermal wear. The electrical motor is engineered with Class H insulation rated to withstand temperatures up to 392 degrees Fahrenheit.

Vibration-dampening rubber feet are integrated into the lower brackets, decoupling the high-RPM fan motor from the fireplace bottom plate to reduce humming and rattle during operation.

Replacement Compatibility

This kit is designed as an aftermarket replacement for factory part numbers GFK-160, GFK-160A, and FAB-1600. It cross-references with Heat N Glo part numbers including 7002-1241, 7002-2944, 7102-2944, 7002-2311, 7002-2143, 7002-1615, 7102-1615, 7002-2152, 7102-2152, and 7058-1221.

Additional cross-references include Rotom HB-RB168 and R7-RB168, Royal GFK-160, Regency 846515 and 490-917, Fasco A133 and 45KC49, and UPPCO 1601881.

Compatible fireplace models include Heat N Glo SL-750TR and SL-750TR-C, Quadra-Fire 7100, Hearth and Home DV3732, as well as select Superior, Majestic, and GTI gas fireplaces designed to accommodate GFK-160 blower configurations. Buyers must verify compartment dimensions (12 13/16" L x 4 5/16" W x 4 5/16" H) before ordering.

Installation & Controls

The kit includes a pre-wired harness to minimize wiring complexity during setup. Electrical power is supplied via an 83-inch, 3-prong grounded plug designed for standard 120-volt, 60 Hz household circuits drawing 1.3 amps.

Temperature automation is handled by a magnetic snap-disc thermostat that sticks directly onto the metal underside or back of the firebox. It automatically powers the blowers when the firebox heats up to 120 degrees Fahrenheit and shuts them off when the firebox cools below 90 degrees Fahrenheit.

An inline rheostat speed controller allows users to dial in continuous motor speeds between low and high, providing precise control over room air velocity and motor sound.

3
Limited Time

GFK160 GFK-160A Fireplace Blower Fan Kit for Heat

Hiorucet
9.5 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The Hiorucet GFK160 GFK-160A Fireplace Blower Kit is a dual ball bearing replacement fan designed to improve room heat circulation for compatible Heat N Glo, Quadra-Fire, Heatilator, and Majestic fireplaces. Delivering 160 CFM of airflow via a standard 115V 3-prong power cord, it suits homeowners needing a direct-fit replacement, though buyers should note that a thermostat and speed control switch are not included.
Pros & Cons

Pros

  • Delivers 160 CFM airflow to effectively circulate trapped warm air into living areas
  • High-temperature Class H insulation rated up to 392 degrees Fahrenheit for heat durability
  • Sealed ball bearings and rubber vibration-dampening feet promote smooth, stable running
  • Generous 83-inch 3-prong grounded power cord offers flexible routing to internal junction boxes
  • Direct cross-reference replacement for dozens of Heat N Glo, Heatilator, and Quadra-Fire part numbers

Cons

  • Does not include a temperature snap-disc thermostat or variable speed control switch
  • Operates at full speed continuously if plugged directly into an unswitched 115V outlet
  • Requires verifying lower firebox cavity dimensions and model compatibility prior to purchase
Detailed Review

The Hiorucet GFK160 GFK-160A Fireplace Blower Fan Kit is a replacement air circulation blower assembly engineered for compatible gas and wood-burning fireplaces from major brands such as Heat N Glo, Quadra-Fire, Heatilator, Monessen, Majestic, and Regency. This unit directly serves homeowners looking to replace a noisy, worn-out, or seized factory blower, as well as those adding forced-air convection to an existing compatible fireplace cavity.

Generating a listed 160 CFM of airflow at 3000 RPM, this dual-wheel blower pulls cooler room air across the exterior jacket of the firebox and propels warm air back through the upper louvers into your living room. While adding a blower fan does not alter the fireplace burner's raw BTU rating, circulating heated air by convection helps distribute warmth across seating areas much faster than natural radiant heat alone.

Because temperatures inside a lower fireplace cabinet can elevate significantly during extended burns, motor durability is crucial. This blower features Class H insulation rated up to 392 degrees Fahrenheit alongside dual sealed ball bearings on the motor and outboard brackets. The blower frame is fitted with rubber mounting feet designed to absorb motor vibration, minimizing the chance of rattles against the sheet metal base of the fireplace.

Operating on standard 115V, 60Hz residential electrical service, the kit arrives pre-wired with an 83-inch 3-prong power cord. The overall assembly measures 12 13/16 inches in length, 4 5/16 inches in width, and 4 5/16 inches in height, with two 4.75-inch discharge openings. Installation typically involves sliding the fan assembly into the lower access compartment below the burner pan, positioning the rubber feet flat against the base, and routing the power cord to the fireplace's integrated electrical outlet.

Buyers should keep in mind that this specific kit includes only the blower motor assembly and the power cord. It does not include an automatic magnetic thermostat switch or a variable rheostat speed dial. If connected to a live, unswitched receptacle, the fan will run constantly at maximum RPM. Homeowners who want automated on/off cycling tied to firebox heat or custom speed adjustments will need to connect this unit to existing fireplace controls or purchase those components separately.

For owners seeking a direct, budget-friendly replacement for an aging GFK-160 or Rotom HB-RB168 motor who already have functional fireplace controls, this kit provides a straightforward solution. Always verify the physical opening dimensions in your fireplace hearth cavity and confirm your exact model cross-reference numbers before ordering.

Compatibility & Cross Reference

This kit is designed as a direct replacement for part numbers GFK-160A, GFK-160, GFK-160B, Royal GFK-160, Rotom HB-RB168, R7-RB168, Regency 846515, 490-917, Fasco A133, 45KC49, and UPPCO 1601881.

It also replaces common Heat N Glo part numbers including 7002-1241, 7002-2944, 7102-2944, 7002-2311, 7002-2143, 7002-1615, 7102-1615, 7002-2152, 7102-2152, and 7058-1221.

Compatible fireplace lines include Heat N Glo (6000CLX, 6000 DVTFL, SL-550TR, DV3732, DV3732-B), Quadra-Fire (7100 series, QV32, QV36, Topaz, Twilight II), Heatilator (A36, A42, ADI Series, BCDV36, BE-36, CB4842, CD4842, CNXT series, DV3732, DV4136, GBi25, GCBC, GCDC, GNTC, MAX60, NOVi, SC60, Titan, Twilight), Monessen (WMC36, WMC42), GTI (33 DV 88, 6000GDV, SL-36, SL-42), and Majestic (G330, G336, G342 series).

Blower & Electrical Specs

Airflow Performance: 160 CFM at 3000 RPM.

Electrical Specifications: 115 Volts, 60 Hz, pre-wired with an 83-inch grounded 3-prong power cord.

Motor Details: Dual sealed ball bearings with Class H insulation rated to withstand temperatures up to 392 degrees Fahrenheit.

Overall Dimensions: 12 13/16 inches long by 4 5/16 inches wide by 4 5/16 inches high, featuring two 4.75-inch air discharge lengths.

Vibration Management: Equipped with rubber isolation mounting feet to dampen cabinet resonance.

Buyer Questions About Fireplace Blower Fans

How does a Majestic 160 Cfm Fireplace Fan improve room heating?

A Majestic 160 Cfm Fireplace Fan improves heating by circulating convective warmth that otherwise remains trapped behind the firebox. The dual blower draws cooler floor air under the appliance, routes it past hot exterior walls, and vents heated air into the room. This active movement balances temperatures and improves practical heating efficiency in large living spaces.

What is the difference between a complete kit and a standalone blower?

Complete kits include a thermostatic switch and a rheostat speed dial, while standalone blowers provide only the dual motor and power cord. Full packages turn on automatically at roughly 120°F and shut off near 90°F. Bare motors suit owners who already have functional wall switches or existing speed controls.

How do you verify fireplace fit before purchasing a Majestic 160 Cfm Fireplace Fan?

Verify fit by comparing your lower compartment dimensions with the blower dimensions, typically 12 13/16 inches long by 4 5/16 inches wide. Cross-reference your model tag with supported part numbers like GFK-160. If you also protect your hearth using a protective fireplace screen, ensure lower louvers stay accessible for maintenance.

Why does a fireplace blower use rubber mounting feet?

Rubber mounting feet isolate motor vibration from the metal fireplace housing, preventing annoying hums or rattling sounds. Fireplace fan motors spin up to 3000 RPM, generating natural vibrations. Soft rubber pads keep your majestic 160 cfm fireplace fan running quietly during extended heating cycles.

Can you install this blower in any wood or gas fireplace?

No, this blower style requires a compatible lower cavity and an active 115V or 120V grounded outlet. While it matches numerous Majestic and Heatilator gas models, it is not universal. If you operate other units like a wood burning fireplace insert, always verify approved part numbers inside your owner guide.