Drafty fireboxes and poor room circulation often turn a cozy hearth evening into a frustrating chore. Getting genuine heating performance from heatilator wood burning fireplaces requires checking flue sizing, combustion ratings, and opening dimensions before buying any stove, insert, or accessory. Open hearths can draw conditioned indoor air straight up the chimney if components don’t match the opening. Exploring a dedicated radiant wood burning firebox or an EPA-compliant insert helps convert that open opening into a functional heating asset. That upgrade makes a noticeable difference when winter supplemental warmth is your main goal.
Plate steel construction, cast-iron doors, and proper outside air shields ensure your setup burns clean without smoke spilling into living spaces. Modern secondary combustion systems and heat-powered fans spread warmth across spaces up to 1,200 square feet without extra wiring. Checking the model tag on your firebox wall prevents expensive ordering mistakes on custom-fit glass doors or log lighters. Matching parts to your exact setup keeps maintenance simple and fires burning efficiently.
Pros
- EPA 2020 compliant clean-burn design reduces smoke and particulate emissions through secondary combustion
- Comes standard with both the 100 CFM air-circulating blower and the decorative surround faceplate
- Accommodates standard 18-inch firewood logs to minimize cutting and reloading chores
- Built with rugged 3/16-inch plate steel, an interior firebrick lining, and a solid cast-iron door
Cons
- Overall dimensions require careful pre-purchase measurement of existing fireplace cavity depth and height to ensure proper fit behind the faceplate
- Flue liner diameter and venting connection specifications are not detailed in the basic product data and must be verified prior to installation
- Heating rating of 1,200 square feet is intended for supplemental zone heating rather than large whole-home coverage
The Comfort Glow CGWI1800 is an indoor wood-burning fireplace insert designed to convert traditional, drafty open masonry fireplaces into sealed, high-efficiency heat sources. Standard open fireplaces often pull more warm air out of the home through the chimney than they provide in radiant heat. This unit addresses that issue directly, making it a compelling option for homeowners who have an existing fireplace opening and want cleaner, more effective supplemental wood heating.
Heating capability centers on an EPA-compliant secondary combustion system that meets 2020 particulate emissions standards. By re-burning smoke and volatile gases before they exit the chimney, the insert extracts more heat from cordwood while significantly reducing emissions. Comfort Glow rates this unit to heat up to 1,200 square feet, which makes it well suited for mid-sized living rooms, open floor plans, or finished basements. Air circulation is supported by an included 100 CFM blower, which actively pulls room air around the hot steel firebox and discharges it back into the living area.
Build quality is rugged, utilizing reinforced 3/16-inch plate steel for the primary firebox body. The interior is lined with protective firebrick, which shields the steel structure from extreme temperatures while improving heat retention. A sturdy cast-iron loading door houses a large ceramic glass window that keeps the flames visible, while a cool-touch spring handle helps ensure safer operation when opening the door to add wood.
Log loading is practical for everyday winter use because the firebox accommodates logs up to 18 inches long. This generous capacity means less time spent cutting split cordwood down to unusual sizes. For aesthetic finishing, the unit includes a black decorative faceplate. The overall listed dimensions of 20 inches deep, 44 inches wide, and 31 inches high reflect the assembly with its surround, helping conceal rough masonry gaps around the existing fireplace opening.
Prospective buyers should carefully plan the installation process before ordering. While the exterior faceplate measures 44 inches wide by 31 inches high, the inner firebox dimensions and exact cavity depth requirements must be verified against your masonry opening. In addition, installing a wood insert into an existing chimney requires a properly sized, code-compliant stainless steel flue liner, which is not included and must be sourced separately based on manufacturer installation instructions.
For homeowners looking to eliminate hearth drafts and regain useful heat from their cordwood, the Comfort Glow CGWI1800 provides substantial value. With heavy-gauge plate steel construction, EPA 2020 clean-burning compliance, an included 100 CFM blower, and an integrated decorative faceplate, it delivers a comprehensive upgrade package for existing fireplace owners.
The Comfort Glow CGWI1800 is engineered around an EPA-compliant secondary combustion burn system that satisfies 2020 federal particulate standards. This design introduces preheated oxygen above the fuel bed, re-igniting volatile smoke particles and increasing heat extraction while lowering chimney emissions.
With a manufacturer-listed heating area of up to 1,200 square feet, this insert provides practical supplemental zone heat. The integrated 100 CFM circulating blower prevents heat from stagnating near the ceiling or escaping up the masonry, actively distributing warm airflow across the living space.
The exterior footprint of this insert is listed at 31 inches high, 44 inches wide, and 20 inches deep, which includes the decorative faceplate trim. The faceplate functions to frame the fireplace opening cleanly, bridging the transition between your existing masonry and the steel firebox.
Internally, the firebox accepts firewood logs up to 18 inches long, allowing owners to burn standard cordwood. Because existing fireplace openings vary widely, always measure your inner hearth width, height, and depth to ensure the firebox body clears your fireplace cavity while the faceplate adequately covers the outer opening.
Pros
- Operates completely free of cords and batteries using thermal energy from your stove
- Very quiet performance rated under 25 dB, making it barely audible in family spaces
- Includes a handy magnetic thermometer to keep track of stove surface heat
- Durable aluminum blade and compact footprint suitable for small to mid-sized stove tops
Cons
- Requires a hot, flat metal surface and will not work on cool-touch, electric, or pellet stove tops
- Does not create its own heat, serving strictly as a passive air distribution tool
- Specific CFM airflow volume and exact start-up temperature thresholds are not listed
The JossaColar heat-powered wood stove fan is an unpowered air-movement accessory designed specifically for freestanding wood burning stoves, log burners, and compatible heating appliances. For wood stove users, a common issue is heat rising directly to the ceiling and pooling around the firebox, leaving the outer perimeter of the room noticeably colder. This self-powered thermal fan addresses that problem by pushing warm air outward horizontally into the living space, making it a great fit for homeowners seeking better room-level warmth without running up electric bills.
Thermal circulation is the core function of this unit, requiring no batteries, external wiring, or wall plugs. As the stovetop heats up, the thermoelectric base converts heat into electrical energy that turns the fan blades. The manufacturer specifies an operating noise level of less than 25 dB, which ensures near-silent running in bedrooms, living rooms, or home offices. To assist with proper stove operation, the package includes a magnetic thermometer, allowing you to easily track surface temperatures directly from the stove pipe or stovetop body.
In terms of construction, the unit features an upgraded black curved aluminum blade assembly designed for extended longevity and consistent airflow. Aluminum provides good thermal conductivity and resistance to warping under regular wood stove heat. Measuring roughly 6.5 inches wide, 3.35 inches deep, and 7.68 inches tall, the fan is compact enough to fit on narrow top plates while remaining stable at just 1.1 pounds.
Setting up the fan is straightforward because it requires zero assembly or electrical installation. You simply set it on a flat, smooth section of your stove top, ideally toward the back or side rather than directly in front of the flue pipe, to allow proper airflow intake. Routine maintenance is minimal, requiring only an occasional dusting with a soft, dry cloth once the stove and fan are completely cooled down.
A realistic limitation of this fan is that it relies entirely on high surface temperatures to function. It will not work on electric fireplaces, gas units with insulated cool tops, or pellet stoves that do not radiate sufficient exterior metal heat. Furthermore, the manufacturer does not provide exact CFM (cubic feet per minute) ratings or precise minimum and maximum temperature limits, meaning buyers must rely on the included magnetic thermometer to verify safe operating conditions.
For owners of traditional wood stoves or log burners looking for a simple, budget-conscious way to boost supplemental heat circulation, the JossaColar fan is a practical addition. Between its quiet operation, cordless design, bundled thermometer, and 1-year replacement warranty, it delivers reliable day-to-day utility for seasonal heating comfort.
The JossaColar wood stove fan features a compact profile measuring 3.35 inches deep, 6.50 inches wide, and 7.68 inches tall. With a total weight of approximately 1.1 pounds, it has a minimal footprint that fits conveniently on most flat metal wood stoves.
Before purchasing, check the top surface of your wood burner to ensure you have at least 3.5 inches of flat depth and adequate overhead vertical clearance for the 7.68-inch height, especially if your stove is set inside an existing fireplace opening or under a low mantel shelf.
This thermal fan operates entirely without an electric motor plug or batteries, relying solely on heat energy transferred from the top of the stove to activate blade rotation. This makes it an energy-free solution for circulating trapped stove heat.
Operating at an ultra-low sound output under 25 dB, the fan provides quiet, passive warm air distribution without the loud whirring or mechanical hum often associated with high-powered electric blower units.
The manufacturer provides a 30-day no-reason refund policy alongside a 1-year replacement warranty covering any product quality or manufacturing defects. Direct customer support is available for troubleshooting and product inquiries.
Pros
- Accommodates logs up to 22 inches long, reducing firewood cutting and preparation time
- Functional flat cooktop provides dependable off-grid cooking and water-boiling utility
- EPA certification confirms compliance with clean-burning indoor emissions standards
- Standard 6-inch flue collar matches common stovepipe and chimney venting systems
Cons
- Heating coverage is limited to 900 square feet, making it unsuitable as a primary heat source for large homes
- Specific clearance-to-combustibles and floor protection hearth pad requirements must be verified in the product manual before installation
- Requires routine manual ash removal and regular chimney flue maintenance
The Comfort Glow Cast Iron Wood Stove is a freestanding solid-fuel indoor heater engineered for small to medium-sized living spaces, cabins, cottages, and off-grid homesteads. For property owners seeking dependable heat without relying on municipal utility grids, this stove pairs classic cast iron thermal mass with an EPA-certified clean-burning firebox. Its space-saving footprint makes it a sensible addition to workshops or secondary residences where floor area must be used efficiently.
Heating capability is rated by the manufacturer for spaces up to 900 square feet. A primary functional advantage is its firebox capacity, which accommodates firewood logs up to 22 inches long. Being able to load full-length cordwood saves considerable labor on firewood splitting while supporting longer, more consistent burn cycles between reloads. The cast iron body absorbs internal firebox heat and radiates warmth smoothly into the surrounding room, sustaining thermal output even as active flames subside.
Built from heavy-duty cast iron, the stove structure is tailored for long-term thermal cycling without warping. The top surface is designed as an integrated flat cooktop, giving owners the ability to boil water, fry in skillets, or keep soup warm directly on the stove body. This functionality makes it particularly useful during winter power outages or in off-grid rustic setups. For user safety during routine wood loading, the door features a two-piece spring handle engineered to stay cool to the touch.
In terms of dimensions, the stove measures 32.5 inches wide by 20 inches deep by 23.5 inches high. It features an industry-standard 6-inch flue collar, which connects directly to standard 6-inch single-wall or double-wall connector pipes and approved chimney venting. Because it is an indoor wood-burning appliance, proper chimney draft and compliant flue installation are critical to ensure safe exhaust ventilation and clean combustion.
Buyers should evaluate their square footage carefully, as the 900 square foot rating will not heat larger, open-concept floor plans without secondary support. Furthermore, exact appliance weight and minimum clearances to combustible walls or mandatory hearth pad dimensions are not specified in the basic product summary and should be verified in the installation manual prior to placement.
Supported by clean-burning EPA certification and a 1-year manufacturer warranty, the Comfort Glow Cast Iron Wood Stove represents a practical, dual-purpose heating and cooking option. It is well-suited for rural homeowners, camp owners, and preparedness-focused buyers who value radiant warmth and emergency cooking independence.
This stove burns cordwood fuel and accepts cut logs up to 22 inches in length, accommodating standard firewood sizes without extensive re-cutting.
Venting is handled via a standard 6-inch flue collar, allowing direct connection to code-compliant 6-inch stovepipes, insulated chimney systems, or properly sized chimney liners.
The integrated flat cast iron cooktop provides direct conductive heat, enabling users to prepare food, boil kettles, or warm pans during emergencies without electricity.
Dense cast iron construction serves as a thermal reservoir, holding onto heat and continuously emitting steady radiant warmth long after coals begin to die down.
Pros
- Exact replacement fit for HHT part numbers 33271 and SRV33271
- Specifically sized for 3-15/16-inch intake ducting tubes
- Multi-brand compatibility covers wood and gas models from Quadra-Fire, Heatilator, Heat N Glo, and Majestic
- Sturdy build intended to handle outdoor weather and heat exposure
Cons
- Not a universal air shield; requires exact match with 3-15/16-inch tube systems
- Mounting screws and exterior sealing gasket materials are not listed and may need to be sourced separately
- Appliance parts manual verification is required before purchase to ensure proper model compatibility
The Total Hearth SRV33271 Outside Air Shield is an aftermarket replacement component specifically engineered for Hearth & Home Technologies (HHT) wood-burning and gas hearth appliances. This exterior intake shield replaces original manufacturer part numbers 33271 and SRV33271, making it an essential maintenance item for homeowners, property managers, and remodelers servicing Quadra-Fire, Heatilator, Heat N Glo, or Majestic fireplaces and stoves that draw external combustion air.
In hearth installations that utilize an outside air kit, the shield terminates the air intake duct on an exterior wall or approved foundation penetration. This component is designed to accommodate a 3-15/16-inch diameter intake tube, protecting the opening while permitting necessary airflow into the firebox. Maintaining a functional intake shield helps ensure that dedicated fresh combustion air reaches compatible wood or gas appliances without obstruction from debris or excessive weather intrusion.
According to the product specifications, the shield features durable construction designed to withstand outdoor environmental elements and heat. The exterior mounting plate measures 5-7/8 inches by 5-7/8 inches and comes in a white finish suitable for standard residential exteriors. Its compatible mounting plate design is intended to align with existing appliance mounting footprints, facilitating a straightforward replacement for damaged or corroded factory components.
Replacement generally involves securing the 5-7/8-inch square mounting plate over the exterior intake penetration and connecting the designated 3-15/16-inch intake tube. Because installation hardware, fasteners, and sealants are not detailed in the product specifications, buyers should plan to inspect their existing exterior setup to determine whether existing mounting hardware can be reused or if exterior-grade fasteners and weather sealant should be acquired separately.
A critical limitation of this part is its application-specific sizing. It is not an adjustable or universal intake cap and will not fit systems configured for standard 3-inch, 4-inch, or 6-inch ducting without modification. Homeowners should consult their fireplace or stove parts list, confirm part number 33271 or SRV33271, and measure their existing intake tube collar to verify the 3-15/16-inch fit requirement before purchasing.
For owners of compatible Heatilator, Heat N Glo, Majestic, or Quadra-Fire wood and gas units, the Total Hearth SRV33271 Outside Air Shield offers a targeted, practical solution for exterior venting maintenance. Verifying your appliance part number and duct dimensions will ensure a clean, dependable fit that restores proper combustion air intake performance.
This Total Hearth outside air shield directly replaces Hearth & Home Technologies (HHT) part numbers 33271 and SRV33271.
Supported brands under the HHT umbrella include Quadra-Fire, Heatilator, Heat N Glo, and Majestic across select wood-burning and gas fireplaces, inserts, and stoves.
Always verify your specific appliance model number and original parts diagram in the owner manual to ensure this part number matches your factory air kit specifications before ordering.
Mounting Plate Dimensions: 5-7/8 inches by 5-7/8 inches square.
Tube Size: Configured for connection to a 3-15/16-inch outside combustion air intake tube.
Color: White exterior finish.
Confirm that your rough exterior wall opening and existing intake pipe diameter match these specific dimensional requirements prior to installation.
Pros
- Precise compatibility profile tailored to specific Heatilator 42-inch models
- Clean black finish integrates smoothly with existing fireplace trim and surrounds
- Restores the original factory aesthetic of compatible zero-clearance hearths
- Avoids the need for custom metal fabrication or risky universal-door adaptations
Cons
- Strictly non-universal with zero compatibility for unlisted fireplace models or brands
- Requires physical inspection of the interior firebox model plate before purchasing
- Product dimensions, glass thickness, and mounting hardware specifics are not detailed in manufacturer data
This Burgess Manufacturing Corporation Fireplace Glass Door Set is a specialized replacement door assembly designed specifically for select Heatilator manufactured fireplaces. It serves homeowners, property managers, and remodelers who need to replace damaged, tarnished, or missing doors on compatible factory-built fireboxes without resorting to costly custom metal fabrication or ill-fitting universal kits.
Functionally, these glass doors are designed to match the specific cabinet openings of Heatilator models E42, E-42I, EC42, EC-42I, and EL42. Installing dedicated glass doors on a compatible factory-built firebox provides a clean, enclosed appearance when the hearth is not in use, helping to conceal interior ash or soot while completing the visual presentation of the room.
The assembly is finished in a standard black coating that matches traditional fireplace trims and surrounding hearth components. The glass panels are set in a rigid frame configured to align with original factory mounting provisions, ensuring the doors fit the intended aesthetic lines of the original Heatilator firebox design.
Proper installation relies entirely on accurate initial verification. Heatilator manufactured fireplaces feature a metal rating plate or specification tag typically riveted or stamped on the interior sheet metal wall of the firebox. Buyers must inspect this plate to confirm their exact model number before purchasing, as prefabricated fireplaces require precise mechanical tolerances.
The primary limitation of this product is its strict lack of universal compatibility. Burgess Manufacturing explicitly notes that this set will not fit unlisted models, alternative sizes, or units from other manufacturers. Furthermore, detailed glass thickness and mounting hardware specifications are omitted from the product data, making reliance on the model number match essential.
For owners with confirmed Heatilator E42, E-42I, EC42, EC-42I, or EL42 units, this replacement door set represents a practical, focused upgrade. It restores the factory look and enclosure function of the fireplace as long as the buyer verifies their interior model tag prior to ordering.
Compatibility for this door set is limited to exact factory matches: Heatilator models E42, E-42I, EC42, EC-42I, and EL42. It is not designed to accommodate other 42-inch units from Heatilator, nor will it mount correctly to masonry openings or products from other fireplace manufacturers.
To verify compatibility, check the inside sheet metal wall of your firebox for a metal identification tag. This tag typically lists the manufacturer name, model number, and date of fabrication. Ordering should only proceed if one of the five approved model designations is clearly displayed on that rating plate.
Prefabricated zero-clearance fireplaces require specific door assemblies designed to fit within factory-punched mounting holes and designated air-clearance channels. Generic aftermarket doors frequently fail because they block crucial airflow louvers or require drilling that can compromise firebox integrity.
This Burgess Manufacturing set is engineered to respect the factory clearances of the specified 42-inch series, maintaining the correct perimeter spacing when installed according to original manufacturer standards.
Pros
- Solid iron pipe construction withstands high firebox temperatures and falling embers
- Convertible straight or 90-degree inlet fits versatile fireplace pipe layouts
- Adjustable air-gas shutter allows fine-tuning for a clean, sharp blue flame
- Standard 1/2-inch NPT inlet integrates easily with existing gas supply plumbing
Cons
- Requires an upstream listed gas shutoff valve, which is not included with the kit
- Designed strictly for wood ignition and cannot be used as a continuous decorative flame or heater
- Requires professional installation by a qualified gas technician to ensure code compliance and safety
The Midwest Hearth Natural Gas Log Lighter is a dedicated burner pipe assembly engineered specifically to assist wood-burning fireplace owners in starting natural firewood quickly. Instead of relying on paper, kindling, or chemical fire starters, this burner sits under your fireplace grate to deliver a steady gas flame directly against wood logs. It is designed specifically for homeowners with a plumbed natural gas supply in their masonry or factory-built wood fireplace who want a simpler ignition process.
Ignition performance centers on an adjustable air and fuel mixing chamber located at the pipe inlet. The integrated shutter allows users or installers to fine-tune the intake of combustion air, producing a sharp, clean blue flame that efficiently transfers heat to seasoned logs. The manufacturer clearly states that this component is strictly an ignition tool rather than a decorative gas burner or space heater. Once firewood catches and sustains its own flame, the gas line must be shut off completely and the key removed to a safe location.
Constructed from solid iron pipe with a gray finish, the assembly is built to withstand the demanding conditions and falling coals inside a wood firebox. The assembly measures 19.5 inches in overall length, consisting of a 17-inch ported burner pipe and a 2.5-inch mixer section, with a total weight of approximately two pounds. Connections are threaded for structural integrity, utilizing 3/8-inch threads between the burner pipe and the air mixer, and a standard 1/2-inch NPT inlet for connecting to gas plumbing.
Installation flexibility is aided by the included mixer plug, which allows the assembly to configure into either a straight in-line setup or a 90-degree angled entry depending on where the gas stub enters the firebox. A listed gas shutoff valve is not included with this kit and must be installed upstream by a qualified gas technician prior to operation. Verifying firebox width, grate clearance, and gas line orientation before installation ensures proper placement directly beneath the log grate.
A critical limitation is that this model is factory-configured specifically for natural gas and must not be connected to liquid propane without the proper designated fuel variation. Because it does not come with mounting brackets, supply pipe extensions, or an emergency shutoff valve, buyers must plan for the complete gas line assembly. Additionally, this burner cannot be left burning unattended or used to supplement home heating, as it is engineered exclusively for intermittent fire starting.
For wood-burning fireplace owners looking to utilize an existing firebox gas line to simplify fire lighting, this Midwest Hearth starter pipe provides a sturdy, practical solution. Its convertible inlet layout and adjustable air shutter make it adaptable to most standard fireplace hearths. As long as it is installed with a certified shutoff valve by a qualified professional and operated strictly as an ignition aid, it offers dependable convenience for every wood fire.
This burner assembly is configured exclusively for natural gas (NG) systems and should not be used with liquid propane lines unless the designated LP model is purchased. Fuel compatibility must be verified prior to connection to avoid incomplete combustion or soot buildup.
The unit features a standard 1/2-inch NPT gas inlet that fits standard residential gas pipes, while 3/8-inch threading connects the burner pipe to the mixing body. The included mixer plug allows the gas feed to be oriented either straight into the back or at a 90-degree angle to accommodate various hearth plumbing layouts.
A listed upstream gas shutoff valve is required for safe operation but is not included in this package. Local building codes typically mandate that a qualified gas technician handle the pipe fitting, pressure testing, and final valve placement.
This device is engineered solely as an ignition aid for seasoned firewood and is not certified as a space heater or decorative gas log appliance. Leaving the gas supply open after the fire has started presents serious safety hazards and voids the intended use.
Once the wood fire is fully established, the upstream gas valve must be shut off completely, and the removable key should be stored in a safe, designated location away from children. Always maintain standard wood fireplace clearances, open dampers, and spark protection during operation.
Frequently Asked Questions
Can you put a wood-burning insert into existing Heatilator Wood Burning Fireplaces?
Only if the insert manufacturer lists the unit for zero-clearance prefabricated fireboxes and clearances allow it. Standard factory-built setups cannot accept every insert because flue alignment and hearth depth differ from masonry fireplaces. If insert fit is an issue, a freestanding electric heater offers alternative supplemental heat. Always verify firebox dimensions before purchase.
How do you verify replacement glass door compatibility for older firebox models?
Locate the metal rating plate attached to the firebox wall to confirm model numbers like E42, EC42, or EL42. Replacement glass doors engineered for specific firebox models will not latch or align properly on incompatible frames. Never order replacement doors based solely on opening measurements.
What is the purpose of an outside air shield on a wood stove or fireplace?
It directs outside air into the firebox while protecting the intake collar from debris and outdoor wind gusts. This component keeps negative room pressure from drawing cold air into the house when the hearth is unlit. Replacement shields fit specific intake tube sizes, such as 3-15/16 inch collars.
Do heat-powered stove fans help distribute heat from wood-burning appliances in 2026?
Yes, heat-powered thermal fans push rising warm air forward into the room without requiring electrical outlets. A built-in thermoelectric generator converts heat from the stove surface into motor power for the fan blades. With silent operation under 25 decibels, these fans help eliminate cold spots across living areas.
Can a natural gas log starter be kept burning continuously like a gas log set?
No, log lighter pipes are built solely to start firewood and must be turned off once logs ignite. Leaving the gas valve open during a sustained wood fire overheats the pipe and wastes fuel. The iron burner pipe and air mixer serve only to establish early ignition.


Write Your Review
No reviews yet. Be the first to share your experience!