Routing exhaust through a roof line requires matched flue pipes to maintain safety and balanced combustion airflow. Fireplace upgrades stall quickly when homeowners realize standard horizontal wall kits cannot handle upward vertical terminations through ceiling joists. Selecting the proper empire vertical vent kit for direct vent fireplace dvvk5vp ensures that your appliance vents combustion gases safely while drawing fresh outdoor air directly into the sealed firebox. Installing dedicated components like an Empire fresh air kit or a vertical coaxial pipe helps prevent draft issues across multi-floor configurations.
Direct-vent appliances depend on tight connections, so matching pipe diameters with your firebox collar is critical before cutting ceiling holes. A sealed coaxial system prevents dangerous fumes from entering living spaces and protects interior framing from radiant heat buildup. Whether you plan to vent a new Empire Comfort Systems hearth or evaluate venting for a direct-vent gas fireplace insert, manufacturer flue guidelines dictate allowable run heights and required elbow offsets. Checking your fireplace installation manual against listed vent accessories saves hours of jobsite adjustments and avoids costly framing reworks.
Pros
- Direct compatibility with designated Empire top-vent appliances
- Sturdy steel construction built for long-term venting duty
- Simplifies through-wall horizontal vent routing for remodelers and builders
- Lightweight 12-pound kit format facilitates easier staging and placement
Cons
- Specific to compatible Empire models and not intended as a universal venting solution
- Designed strictly for top-vent through-wall paths, excluding vertical roof venting runs
- Requires verifying wall thickness, clearances, and local gas venting codes prior to purchase
The Empire DVVK4TSP Direct Vent Fireplace Vent Kit is a specialized venting component package designed specifically for through-the-wall horizontal termination on compatible Empire gas heating appliances. Homeowners and remodelers adding or replacing a direct-vent Empire gas fireplace often encounter strict venting requirements that demand matched components. This kit provides the dedicated hardware needed to route flue gases safely outside while drawing fresh combustion air from outdoors through a sealed top-vent setup.
Venting performance in direct-vent gas systems depends entirely on reliable air intake and balanced exhaust draft. The DVVK4TSP supports proper appliance operation by establishing a stable, sealed passage through an exterior wall. Because direct-vent systems isolate indoor living areas from combustion byproducts, using a manufacturer-tailored venting solution like this kit helps maintain appliance efficiency and proper indoor air safety.
Constructed from durable steel, the kit is designed to withstand high exhaust temperatures and exterior exposure. The steel material provides rigid structural integrity, reducing the risk of sagging or warping along the horizontal wall penetration. With a total weight of 12 pounds, the assembly remains substantial enough for durable service while staying easy to stage and handle during installation.
Planning your installation requires careful review of dimensions and wall construction. The kit components arrive in a 15 x 17 x 21-inch package, designed to align with the top-exit exhaust collar of compatible Empire units. Because through-wall runs require exact wall thimble positioning, minimum clearances to combustible materials, and specific exterior termination clearances, matching this kit to your building envelope is essential before cutting into framing or exterior siding.
The primary limitation of the Empire DVVK4TSP is its specialized application. It is not a universal venting kit for other fireplace brands, nor is it configured for vertical roof terminations. Homeowners must check their specific Empire fireplace manual to verify model compatibility, permissible horizontal vent lengths, and wall-thickness limitations before ordering.
For homeowners and contractors installing a compatible top-vent Empire gas fireplace with a direct exterior wall path, the DVVK4TSP provides a secure, purpose-built venting pathway. Verifying your appliance model number and framing thickness ensures a clean, code-compliant install that delivers reliable venting performance.
Compatibility for the Empire DVVK4TSP depends on your exact appliance model and wall layout. This kit is engineered exclusively for Empire Comfort Systems appliances that support a top-exit horizontal venting configuration. Always consult the venting section of your fireplace installation manual to verify that the DVVK4TSP is listed as an approved venting accessory for your specific model number.
Direct-vent gas systems require strict adherence to local mechanical codes, framing clearances, and manufacturer-specified horizontal run limits. Installing this kit requires proper framing of the wall pass-through, sealing against exterior weather penetration, and maintaining clearances away from windows, doors, and walkways. Professional installation by a licensed gas fitter or qualified fireplace technician is strongly recommended to ensure safe combustion airflow and proper exterior termination.
Pros
- Eliminates chimney and ducting costs for flexible indoor placement
- Sturdy hem-bent seam construction ensures a clean interior and strong cabinet seal
- Customizable interior and exterior allow personalized log, liner, and trim choices
- Built-in louvered front assists natural heat distribution into the living space
Cons
- Requires separate purchase of burner, gas log set, and decorative accessories
- Vent-free appliances are restricted by building codes in certain regions and specific rooms
- Heavy 102-pound steel chassis requires planning for freight handling and recessed framing
The Empire Comfort Systems VFD42FB0L Deluxe 42-Inch Vent-Free Louvered Gas Firebox is a built-in steel enclosure created for homeowners, builders, and remodelers planning an indoor hearth without the expense of an exterior chimney or flue pipe. As a dedicated firebox enclosure, it serves as the foundational structure for a customized gas fireplace installation. It is specifically designed for rooms and home layouts where direct-vent or B-vent chimney pipe cannot easily be routed through exterior walls or roof structures.
Because this unit uses a vent-free design, it provides exceptional placement flexibility throughout indoor living spaces. The front of the firebox features an integrated louvered layout designed to encourage natural warm air convection into the living area once an active burner is installed. It is engineered to house certified vent-free burner and log sets, allowing homeowners to select their preferred burner style, ignition system, and decorative wood-look media separately to match their room layout and aesthetic preferences.
The construction of the firebox highlights heavy-duty fabrication, weighing in at 102 pounds with a classic black finish. A key design attribute is the use of hem-bent seams, which fold the metal edges to create a tight structural seal. This manufacturing method minimizes the need for an excessive number of fasteners and screws, resulting in a cleaner interior appearance, improved cabinet rigidity, and dependable containment of the combustion area.
Regarding dimensions and setup, the cabinet measures 19 inches deep, 35 inches wide, and 24 inches high. Buyers should verify their rough framing dimensions, wall depth, and non-combustible material clearances against manufacturer documentation before beginning carpentry work. Because this is a zero-clearance-style gas firebox chassis, the final build can be finished with a variety of optional surrounds, decorative doors, custom louvers, interior liners, and mantels, which are available separately.
A primary consideration before purchasing is that the VFD42FB0L is an unequipped firebox and does not include a burner, gas valve, log set, or chimney. All operational heating components must be purchased separately as certified vent-free assemblies. Additionally, vent-free gas appliances are subject to state and local building codes, which may restrict installation in certain jurisdictions, tight building envelopes, or confined rooms. Verifying local code compliance and ensuring professional gas line installation are essential steps before ordering.
For homeowners and remodelers looking to build a clean, traditional gas fireplace from the ground up, the Empire VFD42FB0L delivers a solid, well-sealed chassis. Its louvered airflow format, durable hem-bent panel engineering, and broad compatibility with certified vent-free burners make it an adaptable centerpiece for custom living room hearth designs.
The Empire VFD42FB0L is engineered specifically as a vent-free firebox enclosure, eliminating the requirement for exterior chimneys, roof penetrations, or venting pipes. This setup allows for installation along interior walls or areas of the home where running venting to the outside is structurally difficult or cost-prohibitive.
Because the firebox itself does not contain a pre-installed burner, the fuel type, whether natural gas or liquid propane, is determined entirely by the certified vent-free burner system chosen by the buyer. Local building codes vary regarding vent-free appliances, making it essential to confirm municipal approval, room volume guidelines, and fresh-air requirements before purchase.
With listed dimensions of 19 x 35 x 24 inches and a designated 42-inch face format, this firebox provides a spacious opening suitable for standard residential living rooms and family spaces. The chassis is built to accept compatible certified vent-free gas burners and log arrangements to achieve the desired flame appearance and heat output.
To complete the fireplace aesthetic, the unit supports optional decorative liners, frames, louvers, doors, and cabinet mantels, all of which are sold separately. Buyers should consult the official manufacturer framing guides to ensure adequate wall recess depth and appropriate clearances to combustible construction materials.
Pros
- Millivolt valve operates without household power, providing continuous heat during electrical outages
- Direct-vent design provides a sealed firebox system venting through exterior walls or roofs
- Integrated protective safety barrier screen reduces direct contact risk with hot glass
- Popular 32-inch profile suits medium and compact living areas without dominating the room
Cons
- Configured specifically for Natural Gas; propane use requires a separate, verified conversion kit
- Venting pipe components, gas supply line, and professional installation are required and sold separately
- Exact rough framing dimensions and clearances must be verified in the manufacturer manual prior to construction
The Empire Comfort Systems Deluxe 32 Tahoe Direct Vent Millivolt Fireplace is a built-in natural gas hearth designed for homeowners, builders, and remodelers looking to install a permanent gas heating feature. Built around a 32-inch platform, this model is tailored for living rooms, family spaces, or finished basements that call for the warmth and ambiance of real gas flames without demanding excessive wall space. Designed specifically for natural gas hookups, it provides a dedicated heating solution for homes with an existing gas line or planned utility connection.
At the core of this fireplace is a direct-vent combustion design paired with a millivolt control valve. Direct-vent technology draws external air for combustion and expels exhaust directly outdoors through coaxial pipe, maintaining indoor air quality and room integrity. The millivolt standing-pilot system is particularly advantageous in colder climates or storm-prone areas, as it generates its own low-voltage electrical current to operate the gas valve, meaning you can maintain warmth even during severe electrical power outages.
Empire Comfort Systems packages this Deluxe 32 Tahoe unit with an integrated barrier screen. Because direct-vent fireplace glass reaches extremely high operational temperatures, the finely woven mesh barrier screen is a critical safety addition designed to reduce accidental contact with the glass. The clean, traditional firebox styling works well with a wide range of interior designs, whether you plan to finish the surrounding wall with stone, tile, or a classic wood mantel surround.
Installing a built-in direct-vent gas unit requires careful pre-planning and adherence to building codes. As a 32-inch class model, it requires a dedicated framed opening, gas supply line, and compatible direct-vent pipe termination through an exterior wall or roofline. Due to the precision required for gas line pressure testing, venting clearances, and combustible framing offsets, professional installation by a certified gas technician or hearth specialist is strongly recommended.
Potential buyers should note that this specific SKU is configured out of the box for natural gas rather than liquid propane. If you use LP tanks, you will need to verify whether an approved Empire conversion kit is available before purchase. Additionally, accessories such as decorative brick liners, blowers, wall switches, or remotes may not be included in the base package, so verifying included components and checking exact rough framing dimensions against the manufacturer specification sheet is essential.
Overall, the Empire Comfort Systems Deluxe 32 Tahoe Direct Vent MV Fireplace represents a solid, dependable choice for anyone wanting reliable natural gas ambiance. Its balance of power-free millivolt functionality, direct-vent safety, and protective barrier screen makes it an attractive focal point for modest to mid-sized home renovations.
This Empire Comfort Systems Tahoe model is factory-configured for Natural Gas (NG) fuel systems. It should never be connected to liquid propane without an approved conversion kit specified by Empire Comfort Systems. Direct-vent gas appliances utilize a sealed combustion chamber, pulling fresh outside air into the firebox while expelling combustion byproducts outdoors through specialized venting. Buyers must source compatible direct-vent pipe and adhere strictly to maximum horizontal run and vertical rise guidelines outlined in the installation manual.
The unit includes a factory-installed barrier screen positioned in front of the viewing glass to mitigate direct contact burns. As a built-in zero-clearance style appliance, it requires framing into an enclosure with precise clearances to combustible materials like wood studs, drywall, and mantel shelves. Because improper gas pressure or venting termination poses safety risks, installation should always be performed by a licensed gas fitter or certified hearth professional in compliance with local mechanical codes.
Pros
- Includes the burner, log set, tempered glass, and herringbone ceramic fiber liner in the box
- Features an integrated variable-speed blower with a temperature switch for active air circulation
- Millivolt control system allows standard fireplace operation even during electrical power outages
- Substantial 36-inch framing size delivers a prominent, traditional fireplace visual profile
Cons
- Requires a separate purchase of a mandatory fireplace barrier screen or door set to finish the unit
- Designed specifically for natural gas and requires dedicated direct-vent pipe installation
- At 138 pounds, handling and framing require careful planning and multi-person positioning
The Empire Comfort Systems Premium 36-inch Direct-Vent Natural Gas Fireplace (Model DVP36FP31N-DVP36D2H) is a built-in appliance built for homeowners and remodelers looking for a permanent natural gas hearth. It brings together essential heating and aesthetic elements, delivering an authentic masonry appearance inside a modern zero-clearance steel chassis.
Warm air delivery and basic heating operation are assisted by the included variable-speed blower, which features a thermal switch that activates based on firebox heat. The millivolt control valve provides reliable burner ignition and heat operation without relying on household electrical power, keeping the primary flame functional during storm-related power interruptions. As a direct-vent unit, it isolates combustion from the interior living space by venting exhaust gases through exterior-grade direct-vent piping.
Interior build quality centers on an authentic hearth aesthetic, highlighted by a molded herringbone ceramic fiber brick liner that lines the firebox walls. The package includes the dedicated gas burner, realistic log components, and tempered glass front panel designed to withstand regular operational temperatures while maintaining a clean view of the fire.
Framing and rough-in planning must accommodate overall dimensions of 37.62 inches high, 39 inches wide, and 19.87 inches deep, alongside a total weight of 138 pounds. Because this is a permanent built-in natural gas unit, rough opening clearances, gas supply lines, and outdoor vent terminations must follow manufacturer instructions and local mechanical codes closely.
A necessary limitation to prepare for is that the fireplace requires the separate purchase of an approved barrier screen or decorative door set with a barrier frame to complete the installation. Furthermore, specific BTU ratings and precise rough framing dimensions are not detailed in the summary listing and should be verified in the manufacturer installation manual prior to cutting wall studs.
For homeowners planning a living room remodel or custom media surround, this Empire Comfort Systems fireplace offers a dependable, well-accessorized natural gas foundation. The inclusion of the blower assembly, log set, and brick liner makes it a practical choice for buyers seeking traditional charm, provided they budget for the required decorative barrier trim.
This fireplace model is engineered specifically for natural gas supply lines and must be connected to an approved direct-vent chimney pipe system. Direct-vent technology uses a co-axial or co-linear pipe configuration to pull fresh combustion air from outside while exhausting spent gases directly through an exterior wall or roof termination.
Natural gas hookups must be planned with appropriate shutoff valves and pipe diameters matching local building codes. Because conversion kits or alternate fuel setups are not specified in the product data, buyers must confirm natural gas availability at their property before purchasing.
The included millivolt control valve uses a standing pilot and thermopile to generate small electrical currents that operate the gas valve, ensuring functional heat even during local electrical outages. This design allows reliable manual or wall-switch operation without complex electronic boards.
An integrated variable-speed blower assembly comes pre-packaged with the unit to improve warm air convection. The included temperature switch monitors firebox heat, preventing the blower from circulating cool air until the combustion chamber reaches an appropriate operating temperature.
The exterior chassis measures 37.62 inches in height, 39 inches in width, and 19.87 inches in depth, representing a standard 36-inch nominal fireplace opening class. The complete assembly weighs approximately 138 pounds, requiring sturdy framing and floor support.
Final framing dimensions and combustible clearance distances must be checked directly against the official Empire installation guide. Adequate perimeter clearance must also be reserved to accommodate the required decorative barrier screen or door kit chosen to complete the unit.
Pros
- Dedicated vertical venting solution engineered directly for compatible Empire direct-vent models
- Durable steel construction designed to withstand combustion temperatures in enclosed ceiling chases
- Standard 4x7-inch concentric direct-vent configuration supplies fresh outside air while exhausting flue gases
- Substantial 120-inch length provides generous coverage for standard vertical venting configurations
Cons
- Not universally compatible with non-Empire gas fireplaces or different direct-vent diameter systems
- Substantial 38-pound weight and rigid ducting require planned framing clearances and qualified installation
- Buyers must verify their specific fireplace manual for minimum and maximum allowable vertical rise before ordering
The Empire Comfort Systems DVVK4FV is a dedicated direct-vent vertical vent kit engineered for homeowners, contractors, and remodelers installing compatible Empire gas fireplaces. When floor plan constraints or architectural designs prevent running horizontal exhaust pipe through an exterior sidewall, a vertical run through the ceiling and roof is often the necessary route. This kit provides the primary direct-vent components needed to establish that vertical discharge path for approved Empire appliances.
Functioning as a 4x7-inch concentric system, this assembly simultaneously handles outgoing flue gases and incoming combustion air. Direct-vent gas appliances rely on a sealed combustion cycle that draws outside oxygen through the outer pipe while expelling exhaust through the inner pipe. This balanced design preserves indoor air quality and ensures the fireplace operates with stable drafting, provided the vertical run adheres to the height and elbow limitations specified by the appliance manufacturer.
Constructed with a durable steel finish and weighing 38 pounds, this venting assembly offers the physical rigidity and heat resistance necessary for concealed wall cavities and attic spaces. The heavy-duty steel build is engineered to withstand routine operating temperatures while maintaining a dependable, sealed air passage across its listed 120-inch total reach.
Measuring 7.5 by 4.5 inches across package dimensions with an extended reach of 120 inches, planning the installation requires careful coordination with ceiling joists, roof rafters, and firestop spacers. Proper direct-vent installation demands strict adherence to manufacturer clearances to combustible materials, appropriate roof flashing, and local mechanical codes. Because gas venting safety is paramount, installation should typically be handled by a qualified gas or hearth technician.
A critical consideration with any direct-vent pipe is component compatibility. Venting systems are not universal, and direct-vent pipes from different manufacturers or different model series cannot be mixed. Buyers must cross-reference their Empire appliance manual to ensure the model requires a 4x7-inch vertical configuration and that the DVVK4FV kit is listed as an approved venting accessory.
For homeowners and builders completing an Empire direct-vent gas fireplace project that requires vertical roof discharge, the Empire DVVK4FV kit provides an OEM-matched venting solution. Its solid steel construction and designated 4x7-inch direct-vent profile provide the reliable, sealed performance necessary for a safe and code-compliant fireplace installation.
This kit is specifically designed for direct-vent gas hearth appliances, supporting both natural gas and liquid propane units where the appliance utilizes a 4-inch exhaust and 7-inch air intake format. Direct-vent technology draws 100 percent of its combustion air from outside the home and vents all combustion byproducts directly outdoors, maintaining indoor air quality.
Vertical venting requires strict compliance with the minimum and maximum vertical vent heights detailed in your specific gas fireplace manual. Operating within the approved height parameters ensures proper drafting and prevents flame lift or pilot outages.
The Empire DVVK4FV is intended for compatible Empire Comfort Systems direct-vent fireplaces and inserts engineered for 4x7-inch pipe connections. It should not be used with B-vent appliances, wood-burning stoves, or direct-vent models from other manufacturers requiring different locking mechanisms or pipe dimensions.
Always check your appliance model number against the manufacturer installation manual to verify that the DVVK4FV vertical vent kit is explicitly listed as an approved venting accessory before starting your project.
Frequently Asked Questions About Empire Vertical Vent Kit For Direct Vent Fireplace Dvvk5vp
What is the primary function of the Empire Vertical Vent Kit For Direct Vent Fireplace Dvvk5vp?
This kit directs combustion exhaust vertically through the roof while drawing outside air to support closed-loop combustion. Coaxial venting systems utilize an inner flue for exhaust and an outer pipe for intake air. This vertical configuration allows direct-vent gas fireplaces to operate safely in rooms without existing masonry chimneys or exterior wall access. Always verify flue collar dimensions and permissible vertical rise limits in your Empire appliance manual before securing components.
Can a vertical vent kit be converted into a horizontal termination?
No, dedicated vertical vent packages include roof flashing, storm collars, and vertical termination caps designed exclusively for upward roof runs. Horizontal runs require dedicated through-wall kits like the Empire DVVK4TSP with appropriate wall thimbles and side-wall caps. Mixing components between horizontal terminations and vertical rooftop systems voids manufacturer certifications and creates moisture or backdraft hazards. Always purchase the specific kit geometry specified for your framing layout.
How do direct-vent kits differ from vent-free systems?
Direct-vent packages use sealed coaxial pipe that isolates combustion completely from indoor room air, whereas vent-free fireboxes release heat and combustion products directly into living spaces. Vent-free units like the Empire VFD42FB0L require specific room volume calculations and no external flue pipes whatsoever. In contrast, direct-vent systems preserve indoor air quality and prevent room oxygen depletion. If you need specialized exterior venting protection, inspecting durable roof venting caps helps maintain proper draft conditions.
Does this kit fit all Empire direct-vent fireplace models?
Compatibility depends strictly on the collar diameter specified on your fireplace data plate. Empire produces appliances that utilize different vent sizing, such as 4×7-inch or 5×8-inch coaxial pipes, depending on heat output and firebox dimensions. Attempting to force an incompatible vent diameter onto a fireplace collar risks exhaust leakage and fire hazards. Always cross-reference the exact part number listed in your fireplace manual before purchasing replacement venting.
What clearances to combustibles are required around vertical direct-vent pipe?
Manufacturer specifications typically demand a dedicated air-space clearance, commonly one to three inches, between the outer vent pipe and combustible building materials. Interior framing, insulation, ceiling joists, and roof decking must stay clear of the outer pipe wall along the entire vertical rise. Firestop spacers and ceiling supports are required at every floor penetration to preserve this gap. Always review the clearance charts provided in the fireplace installation guide to satisfy local building codes.
Can flexible venting be substituted for rigid vertical pipe sections?
Flexible direct-vent piping may only be used if explicitly listed as an approved accessory in the manufacturer installation manual for that specific model. While kits like the Empire DVVK4FV utilize flexible runs for easier routing through tight stud bays, improper support can cause sagging and dangerous heat traps. Rigid pipe sections are generally preferred for straight, tall vertical runs through multi-story buildings. Always check model-specific vent charts before substituting flexible components.


Write Your Review
No reviews yet. Be the first to share your experience!