Dividing an open-concept living space while preserving light and warmth often leads homeowners to multi-sided gas units. Planning an enclosure between a great room and dining area requires attention to framing depth, venting paths, and fuel supply. When comparing models like Empire Tahoe Peninsula And See Through Fireplaces, you notice that selecting between three-sided peninsula units and dual-sided see-through systems alters wall framing needs. Direct-vent configurations pull outside combustion air and vent through an exterior wall or roof. Pairing these setups with certified gas line installations helps deliver proper manifold pressure.
Understanding ignition types, such as millivolt standing pilots versus electronic intermittent pilots, prevents surprises during seasonal cold snaps. Many multi-sided units feature clean-face perimeters that allow tile or stone finishes right up to the firebox opening. Unlike standard chimney-free fireplaces, direct-vent setups maintain sealed combustion chambers for clean interior air. Checking rough dimensions, safety screens, and decorative log requirements beforehand keeps installation on schedule.
Pros
- Three-sided open viewing format creates a high-impact room divider for open-concept layouts
- Substantial 35,000 BTU natural gas heat output provides dependable supplemental zone warming
- Built-in dimmer accent lighting and banded brick liner offer attractive visuals year-round
- Direct-vent design ensures sealed combustion that protects indoor air quality
Cons
- Peninsula direct-vent framing, venting termination, and gas plumbing require careful professional installation
- Configured out of the box for natural gas, requiring verification if propane conversion is needed
- Substantial multi-sided footprint requires dedicated wall protrusion and clearance planning
The Empire Premium 36-Inch Direct Vent Peninsula Fireplace is engineered for homeowners, custom builders, and remodelers seeking to make a statement between adjoining living areas. With its three-sided peninsula configuration, this fireplace acts as a functional room divider, projecting out from a wall to distribute light, warmth, and visual interest into two or three distinct zones simultaneously, such as a great room, dining area, and kitchen.
Performance is anchored by a robust 35,000 BTU burner designed for natural gas operation. This output level provides substantial supplemental zone heat capable of warming large open spaces effectively. Complementing the flame presentation is a dimmer-controlled accent light system that highlights the interior firebox. This allows owners to enjoy ambient hearth illumination during warmer months or intimate evenings without running the main gas burner at full capacity.
Visually, the firebox is lined with a banded brick veneer that brings a classic masonry feel to modern gas technology. The textured brickwork contrasts nicely against the glowing flames and reflective glass panels, preventing the interior from looking hollow or industrial. Because the peninsula format exposes three sides of the firebox, the interior liner design remains visible from nearly every angle in the room.
As a direct-vent appliance, this fireplace utilizes a sealed combustion system. It pulls fresh outdoor air into the firebox for combustion and exhausts combustion byproducts directly outside through dedicated venting pipe, maintaining indoor air balance. Because direct-vent systems require specific pipe sizing, termination caps, and clearance to framing, planning the venting route through an exterior wall or roof is an essential early step during the construction or remodeling process.
Buyers should account for the installation scope associated with a multi-sided gas unit. Because it operates on natural gas, connecting to a dedicated fuel line and securing proper permits are standard requirements. If you intend to run this unit on liquid propane, verify factory compatibility and appropriate conversion components beforehand, as gas types are not interchangeable without proper manufacturer-approved hardware.
For homeowners and remodelers looking to unite adjacent rooms with an upscale architectural focal point, the Empire 36-Inch Peninsula direct-vent model offers an exceptional blend of substantial BTU output, durable construction, and multi-angle ambiance. Its classic banded brick aesthetic and flexible lighting controls make it a worthy centerpiece for any open-concept renovation.
This Empire Peninsula model is factory-configured for natural gas operation with an input rating of 35,000 BTUs. Natural gas provides a continuous, convenient fuel source without the need for tank refills or fuel storage on site. Buyers should never connect this unit to liquid propane unless utilizing the manufacturer-specified fuel conversion kit and procedures.
The direct-vent configuration utilizes a sealed glass front system that isolates the living area from the combustion chamber. It vents through a co-axial or designated direct-vent pipe assembly, pulling combustion air from the outdoors while venting exhaust gases safely outside. Verify local building codes, minimum venting lengths, and required exterior clearances before finalizing your venting layout.
Peninsula fireplaces project perpendicular to an interior or exterior wall, which demands precise framing to create the three-sided enclosure. Product dimensions and rough framing cutouts are distinct measurements, so review Empire's official framing guide to ensure proper header support, side clearances, and non-combustible material placement around the opening.
Because installation involves gas line plumbing, electrical connections for the dimmer accent light, and structural vent runs, professional installation by licensed gas fitters and hearth technicians is strongly recommended. Proper clearances to surrounding mantels, side walls, and flooring must be verified prior to drywall finishing.
Pros
- Millivolt valve operates without household power, providing continuous heat during electrical outages
- Direct-vent design provides a sealed firebox system venting through exterior walls or roofs
- Integrated protective safety barrier screen reduces direct contact risk with hot glass
- Popular 32-inch profile suits medium and compact living areas without dominating the room
Cons
- Configured specifically for Natural Gas; propane use requires a separate, verified conversion kit
- Venting pipe components, gas supply line, and professional installation are required and sold separately
- Exact rough framing dimensions and clearances must be verified in the manufacturer manual prior to construction
The Empire Comfort Systems Deluxe 32 Tahoe Direct Vent Millivolt Fireplace is a built-in natural gas hearth designed for homeowners, builders, and remodelers looking to install a permanent gas heating feature. Built around a 32-inch platform, this model is tailored for living rooms, family spaces, or finished basements that call for the warmth and ambiance of real gas flames without demanding excessive wall space. Designed specifically for natural gas hookups, it provides a dedicated heating solution for homes with an existing gas line or planned utility connection.
At the core of this fireplace is a direct-vent combustion design paired with a millivolt control valve. Direct-vent technology draws external air for combustion and expels exhaust directly outdoors through coaxial pipe, maintaining indoor air quality and room integrity. The millivolt standing-pilot system is particularly advantageous in colder climates or storm-prone areas, as it generates its own low-voltage electrical current to operate the gas valve, meaning you can maintain warmth even during severe electrical power outages.
Empire Comfort Systems packages this Deluxe 32 Tahoe unit with an integrated barrier screen. Because direct-vent fireplace glass reaches extremely high operational temperatures, the finely woven mesh barrier screen is a critical safety addition designed to reduce accidental contact with the glass. The clean, traditional firebox styling works well with a wide range of interior designs, whether you plan to finish the surrounding wall with stone, tile, or a classic wood mantel surround.
Installing a built-in direct-vent gas unit requires careful pre-planning and adherence to building codes. As a 32-inch class model, it requires a dedicated framed opening, gas supply line, and compatible direct-vent pipe termination through an exterior wall or roofline. Due to the precision required for gas line pressure testing, venting clearances, and combustible framing offsets, professional installation by a certified gas technician or hearth specialist is strongly recommended.
Potential buyers should note that this specific SKU is configured out of the box for natural gas rather than liquid propane. If you use LP tanks, you will need to verify whether an approved Empire conversion kit is available before purchase. Additionally, accessories such as decorative brick liners, blowers, wall switches, or remotes may not be included in the base package, so verifying included components and checking exact rough framing dimensions against the manufacturer specification sheet is essential.
Overall, the Empire Comfort Systems Deluxe 32 Tahoe Direct Vent MV Fireplace represents a solid, dependable choice for anyone wanting reliable natural gas ambiance. Its balance of power-free millivolt functionality, direct-vent safety, and protective barrier screen makes it an attractive focal point for modest to mid-sized home renovations.
This Empire Comfort Systems Tahoe model is factory-configured for Natural Gas (NG) fuel systems. It should never be connected to liquid propane without an approved conversion kit specified by Empire Comfort Systems. Direct-vent gas appliances utilize a sealed combustion chamber, pulling fresh outside air into the firebox while expelling combustion byproducts outdoors through specialized venting. Buyers must source compatible direct-vent pipe and adhere strictly to maximum horizontal run and vertical rise guidelines outlined in the installation manual.
The unit includes a factory-installed barrier screen positioned in front of the viewing glass to mitigate direct contact burns. As a built-in zero-clearance style appliance, it requires framing into an enclosure with precise clearances to combustible materials like wood studs, drywall, and mantel shelves. Because improper gas pressure or venting termination poses safety risks, installation should always be performed by a licensed gas fitter or certified hearth professional in compliance with local mechanical codes.
Pros
- See-through linear format delivers flame ambiance to two rooms at the same time
- Vent-free design avoids the cost and structural complexity of venting pipes or chimneys
- Substantial 60-inch viewing length provides a true luxury statement for wide divider walls
- Pre-configured specifically for homes operating on dedicated liquid propane systems
Cons
- Vent-free gas appliances are restricted or prohibited by local building codes in certain jurisdictions
- Requires a dedicated liquid propane supply line and professional gas-fitter installation
- Large framing footprint demands strict adherence to non-combustible clearances and enclosure specifications
The Empire Boulevard 60-inch see-through vent-free fireplace (model VFLB60SP90P) is an architectural, double-sided linear gas appliance designed specifically for liquid propane. It targets homeowners, custom builders, and remodelers looking to anchor a dividing wall between adjoining areas, such as a great room and dining room, with an open double-sided flame presentation. Its elongated horizontal profile provides a modern aesthetic that traditional box-style units cannot replicate.
Because this model carries a vent-free designation, it operates without exterior flue piping, chimneys, or rooftop vent terminations. Operating on liquid propane, the burner directs supplemental warmth directly into the living space without heat escaping through a chimney. Vent-free appliances rely on interior room air for combustion, so buyers must verify that total room volume guidelines and local indoor air quality standards support an unvented propane fireplace of this scale.
Structurally, the Boulevard 60-inch chassis provides an elongated firebox constructed for modern interior installations. The see-through configuration requires specialized framing that accommodates open viewing on both sides, allowing sightlines and natural light to pass uninterrupted between rooms. Surrounding wall construction, headers, and decorative wall finishes must follow the manufacturer non-combustible material guidelines to maintain proper thermal safety during extended operation.
Installing this fireplace requires coordinated work between framing contractors and certified gas professionals. The unit is dedicated to liquid propane, requiring a properly sized LP supply line, regulator, and adequate fuel storage. Because double-sided framing depths, chase construction, and clearance to combustible drywall require exact planning, obtaining the manufacturer framing manual prior to rough-in work is critical.
Realistic limitations revolve around local regulations and site preparation. Vent-free gas hearth appliances face restrictions in certain states, municipalities, and confined spaces such as bedrooms. Furthermore, decorative burner media, liners, and decorative trim fronts are frequently sold as separate accessories depending on the final aesthetic chosen, making it important to confirm exactly what components are bundled with the VFLB60SP90P chassis prior to project kickoff.
For remodelers planning a contemporary partition wall and seeking substantial double-sided ambiance without the complexity of routing exterior venting, the Empire Boulevard VFLB60SP90P provides an impressive architectural solution. As long as a reliable liquid propane supply is available and regional building codes permit unvented installations, this 60-inch linear model serves as an exceptional design element.
This unit is factory-configured specifically for liquid propane (LP) fuel. It must be connected to an approved propane supply line with appropriate inlet pressure and regulation provided by a licensed gas installer.
The vent-free (VF) engineering allows operation without exhaust pipes, chimneys, or power vents. However, vent-free appliances have strict combustion air requirements, room volume minimums, and local jurisdiction rules that must be checked prior to purchase and installation.
A 60-inch see-through linear fireplace requires a custom framing cutout accessible from both sides of the wall structure. Precise framing dimensions, header heights, and cavity depths must be verified against Empire technical documentation.
Non-combustible facing materials such as tile, stone, or cement board are typically required immediately surrounding the viewing openings. Always consult the manufacturer installation guide for clearance rules regarding mantels, televisions, and electrical wiring placed above the unit.
Pros
- Exact model-specific design for 36-inch Empire Tahoe Deluxe fireplaces
- Detailed aged brick pattern provides a traditional masonry appearance behind the burner
- Ceramic composition handles routine fireplace heat exposure without warping
- Official Empire component ensures alignment with factory interior dimensions
Cons
- Strictly limited to 36-inch Tahoe Deluxe models and will not fit other fireplace sizes or brands
- Ceramic panels are brittle and require cautious handling during unpacking and positioning to avoid chips or cracks
- Does not include mounting brackets or hardware beyond what is specified in the fireplace manual
The Empire DVP-2-SA Aged Brick Ceramic Liner is an interior decorative liner kit created specifically for 36-inch Empire Tahoe Deluxe fireplaces. For homeowners, property managers, and remodelers seeking to refresh an existing living room hearth, this accessory upgrades the look of the standard firebox without requiring any structural framing alterations. It delivers a traditional masonry aesthetic that complements both modern and rustic American interior designs.
Functionally, this liner kit acts as an aesthetic backdrop that enhances the visual depth of your fireplace. Instead of gazing into a plain, dark metal firebox, the aged brick pattern reflects the warm glow of the burner and log set, creating a much richer visual centerpiece. Because it is engineered to exact factory dimensions for 36-inch Tahoe Deluxe units, it preserves the internal air pathways and combustion clearances specified by the manufacturer.
The liner is manufactured from heat-tolerant ceramic material designed to endure standard operating temperatures inside a gas firebox. The surface features an authentic aged brick texture and coloring, simulating individual bricks and mortar lines. While tough against radiant heat, ceramic liners are naturally rigid and porous, meaning they must be handled gently prior to being secured inside the firebox.
Installation involves placing the ceramic panels directly into the firebox cavity of a compatible 36-inch Tahoe Deluxe fireplace according to Empire installation guidelines. Homeowners should exercise caution when positioning the pieces around burner assemblies, log racks, or pilot brackets to prevent chipping the edges. Routine maintenance is minimal, though any soot accumulation should only be removed using a soft, dry brush or vacuum nozzle held at a distance, avoiding harsh chemical cleaners or water.
The primary constraint of the DVP-2-SA liner is its narrow compatibility profile. It is engineered strictly for the 36-inch Tahoe Deluxe series and will not seat properly in 32-inch or 42-inch Tahoe units, Tahoe Premium models, or fireplaces from other manufacturers. Buyers must inspect the rating plate inside their fireplace cabinet to confirm their exact model number before purchasing.
For owners of a 36-inch Empire Tahoe Deluxe fireplace looking to elevate their hearth visual appeal, the Empire DVP-2-SA Aged Brick Ceramic Liner is a worthwhile, factory-accurate upgrade. It provides a timeless brickwork finish, reliable heat tolerance, and the peace of mind that comes with using an authentic manufacturer accessory.
This ceramic liner kit is designated under part number DVP-2-SA and is specifically engineered for 36-inch Empire Tahoe Deluxe fireplace models. It matches the interior firebox height, depth, and back-wall contour of this specific fireplace family.
This liner is not a universal accessory. It will not fit 32-inch or 42-inch Tahoe Deluxe models, nor is it designed for Tahoe Premium, Boulevard, or third-party manufactured gas fireplaces. Always check the fireplace serial plate located behind the lower control access door to verify your exact model size and series before ordering.
Ceramic liner components are fragile prior to final placement and should always be unpacked on a flat, padded surface. Avoid flexing the panels or striking them against metal firebox components, burners, or log grates during installation.
To maintain the aged brick finish, clean the panels only when the fireplace is completely cool. Never apply liquid cleaners, abrasive pads, or damp cloths to the ceramic surface. Lightly dust the surface using a dry, soft-bristle brush to remove household dust or light soot accumulation without damaging the textured brick finish.
Pros
- Dual-sided see-through format creates an eye-catching focal point shared between two living areas
- Clean-face profile provides a sleek, modern look that integrates smoothly with tile, stone, or drywall
- Includes two safety barrier screens for both sides of the viewing opening right out of the box
- Flexible interior styling options accommodate either classic gas logs or modern stone media
Cons
- Decorative media is not included and requires purchasing an Empire log set or stone kit separately
- Designed strictly for natural gas; fuel conversion capability to propane is not specified in product data
- The 24-inch depth and direct-vent requirement demand dedicated framing and professional gas installation
The Empire Comfort Systems Tahoe Premium 36 (model DVCP36SP70N) is a built-in direct-vent natural gas fireplace featuring a two-sided see-through firebox. This architectural appliance is tailored for homeowners, designers, and remodelers seeking to divide two living spaces, such as an open-concept living and dining area or a primary bedroom and bath, with a shared visual element. The clean-face construction allows decorative facing materials to install right up to the viewing frame without exterior louvers cluttering the perimeter.
This model is built specifically for natural gas and incorporates an intermittent pilot (IP) ignition system indicated by its model code. Operating as a direct-vent unit, it utilizes a sealed combustion firebox that pulls outside air for combustion while expelling exhaust gases to the outdoors. The unit includes two safety barrier screens to cover both viewing sides. Specific BTU heat input, supplemental heating capacities, and room square-footage ratings are not provided in the primary specifications and must be verified in the technical manual.
Construction quality centers on a heavy-duty steel cabinet engineered for permanent built-in placement. The clean-face surround creates a seamless transition for custom tile, stone, or wall finishes. Decorative firebox media is not bundled with the fireplace cabinet. Buyers must choose and purchase an approved Empire gas log set or contemporary stone kit separately, offering the flexibility to match traditional or transitional interior decor.
Installation planning requires careful consideration of the exterior cabinet dimensions, which measure 45.5 inches wide, 24 inches deep, and 39.5 inches high. Because this appliance is framed into a partition wall to serve two rooms, precise framing depth and opening dimensions are required. As with any direct-vent gas appliance, installation necessitates dedicated natural gas supply piping, direct-vent flue pipe routing to an exterior terminal, and adherence to local mechanical building codes.
A notable limitation of this package is that internal burner media is sold separately, adding to the initial setup cost. In addition, the listing designates this model strictly for natural gas without explicit documentation regarding propane conversion kits or field-convertible valves. Buyers should verify framing cutouts, combustible clearances, venting restrictions, and electrical requirements for the intermittent pilot system prior to purchasing.
For buyers planning a high-impact renovation that integrates two adjacent living areas, the Empire Comfort Systems Tahoe Premium 36 DVCP36SP70N provides a robust, clean-face see-through platform. When paired with a compatible media kit and installed by a qualified gas technician, it functions as a functional, elegant centerpiece across two distinct rooms.
The exterior cabinet of the Empire Tahoe Premium 36 measures 45.5 inches in width, 24 inches in depth, and 39.5 inches in height. These dimensions reflect the outer casing of the appliance rather than the rough framing cutout.
Because the unit is built to pass through an interior dividing wall, framers must account for wall thickness, framing stud placement, and manufacturer clearances to combustibles. Always refer to the official Empire framing and installation manual before cutting or building framing walls.
The DVCP36SP70N is factory-configured for natural gas. Natural gas systems require proper line sizing and supply pressure; this unit should never be connected to liquid propane without explicit manufacturer verification and an approved conversion kit.
As a direct-vent fireplace, the appliance uses a sealed combustion loop. Combustion air is drawn from outdoors and flue gases are exhausted through dedicated direct-vent pipe, eliminating the need for an existing masonry chimney while requiring planned exterior termination paths.
Pros
- Dual-sided see-through design serves two rooms at once with a single direct-vent appliance
- Includes two dedicated safety barrier screens right out of the box
- Clean-face profile creates a modern, seamless look when finished with surrounding wall materials
- Media flexibility allows buyers to select either traditional logs or contemporary stones and logs
Cons
- Decorative burner media is not included and must be purchased separately before use
- Substantial 24-inch depth requires a thick framing cavity and careful structural planning
- Requires professional natural gas line connection and dedicated direct-vent pipe installation
The Empire Comfort Systems Tahoe Premium 36 (model DVCP36SP30N) is a clean-face, direct-vent see-through natural gas fireplace built for installation within an interior dividing wall. This unit is tailored for homeowners, designers, and remodelers seeking to connect two adjacent spaces, such as a family room and dining room or a bedroom and sitting area, with a shared architectural flame display.
Configured specifically for natural gas line connections, this direct-vent unit operates with a sealed combustion setup that routes venting to the building exterior. The see-through configuration offers open sightlines from both sides of the wall, and Empire Comfort Systems includes two safety barrier screens to maintain a protective barrier over the heated viewing surfaces on both sides.
Interior styling is customizable because decorative media is not bundled in the box. Homeowners must select and purchase a compatible Empire log set or mixed logs and stones kit separately before completing the installation. This requirement allows purchasers to tailor the firebox interior to match either a rustic, traditional hearth aesthetic or a more transitional stone appearance.
Proper spatial planning is necessary due to the unit footprint of 45.5 inches wide, 24 inches deep, and 39.5 inches high. Because the depth measures two full feet, the surrounding partition wall requires dedicated framing depth, structural headers, and clearance planning. Buyers should consult manufacturer framing guides and venting manuals with their professional installer before framing the opening.
For homeowners and remodelers looking to build a high-impact architectural divider with the convenience of natural gas, the Tahoe Premium 36 delivers a solid, well-proportioned foundation. Prospective buyers simply need to account for the separate media kit purchase and professional gas fitting requirements when planning their hearth project.
The Tahoe Premium 36 DVCP36SP30N features overall chassis dimensions of 45.5 inches in width, 24 inches in depth, and 39.5 inches in height. Because this is a see-through fireplace designed to penetrate a wall between two living spaces, wall framing must accommodate both the 24-inch depth and the required framing clearances specified by the manufacturer.
Finish materials can be brought directly toward the clean-face perimeter depending on manufacturer clearance instructions. Buyers should verify finished wall thicknesses, floor support requirements, and rough opening specifications before commencing carpentry work.
This fireplace model is engineered specifically for natural gas operation and is not designed for interchangeable fuel use without certified manufacturer-approved conversion equipment. The direct-vent system requires dedicated venting pipe routed through an exterior wall or roof termination.
Direct-vent engineering maintains a sealed combustion chamber, drawing outdoor air for burning and exhausting combustion byproducts outside. All gas supply connections, gas line sizing, and venting runs must adhere to national and local mechanical codes and should be handled by a qualified gas technician.
The DVCP36SP30N firebox is supplied as an unfinished unit requiring the addition of approved interior media. Buyers must choose either an approved Empire log set or a mixed logs and stones kit to complete the burner setup.
Operating this fireplace without the designated manufacturer media kit is not permitted. Confirming the exact model numbers of approved log or stone collections ensures proper burner operation, correct flame distribution, and safe clearance inside the firebox.
Pros
- Direct-vent sealed combustion safely vents exhaust gases outdoors while drawing in exterior air for combustion
- Millivolt valve operates without household power, maintaining warmth during storms and electrical blackouts
- Remote-ready capability lets users easily upgrade to a compatible thermostat remote or wall switch
- Clean-face profile provides a contemporary built-in aesthetic that integrates smoothly into customized mantels and tile surrounds
Cons
- Configured out of the box strictly for natural gas, requiring separate verification if propane conversion is needed
- Requires professional venting assembly, framing, and gas line plumbing rather than simple plug-in DIY installation
- Handheld remote control and venting pipes are not supplied with the bare chassis and must be sourced separately
The Empire Comfort Systems Tahoe Clean Face Direct Vent Deluxe 32-inch Fireplace serves homeowners and remodelers looking for a permanent, built-in natural gas heating appliance. Engineered for new construction or renovation projects, this unit acts as a structural centerpiece rather than a freestanding appliance. Its 32-inch form factor provides an attractive fire presentation suited for living rooms, master suites, or basement living areas where existing brick chimneys do not exist.
Operationally, this model relies on direct-vent technology and a millivolt ignition system. Direct-vent architecture utilizes a co-axial or co-linear pipe system to draw outside air into a sealed combustion chamber while exhausting combustion byproducts outdoors, helping maintain balanced indoor air quality. The millivolt standing pilot creates its own small electrical current via a thermopile, which means the fireplace can ignite and deliver warmth during cold-weather utility power outages without needing a generator or battery backup.
In terms of construction, the chassis features a sturdy black finish and weighs approximately 96 pounds. The clean-face design eliminates intrusive louvers, allowing non-combustible materials like tile, stone, or drywall to finish closer to the fire opening for a cleaner, modern architectural look. The unit dimensions measure 16.38 inches deep, 35.63 inches wide, and 34 inches high, offering a proportional viewing window without claiming excessive floor depth from the room.
Installation requires careful planning and licensed trade work. Because this is a factory-configured natural gas (NG) appliance, it requires hard-plumbed gas lines and dedicated exterior direct-vent piping through an exterior wall or roof. Product dimensions should never be confused with rough framing cutouts, so builders must reference Empire Comfort Systems' specific clearance manuals for combustible standoff distances, hearth extensions, and mantel placement before framing the enclosure.
While the fireplace offers convenient remote-ready capability, buyers should note that remote controls and wall switches are optional accessories that require separate purchase. Additionally, the unit is configured strictly for natural gas; buyers needing liquid propane (LP) should confirm conversion kit availability and compatibility prior to ordering. The product data does not list specific factory BTU outputs or heating-area square footage, so buyers should review technical data sheets to ensure it aligns with their regional zone-heating requirements.
For homeowners planning a living room remodel or new build with access to a natural gas line, the Empire Tahoe 32-inch Clean Face fireplace offers a reliable, electricity-independent focal point. Its sealed venting path, clean exterior profile, and dependable millivolt valve make it a strong architectural choice for long-term home heating.
This Empire Comfort Systems Tahoe model is configured for natural gas (NG) residential utility connections. Natural gas setups operate at standard low residential pressures, and any fuel line installation should be performed by a certified gas technician in compliance with local plumbing and mechanical codes. Propane conversion should not be attempted without confirming the exact manufacturer-approved conversion kit.
The direct-vent configuration is a key advantage over traditional open-hearth or vent-free systems. Direct-vent fireplaces operate with a fully sealed glass front, drawing outside air for combustion while venting exhaust directly outside. This design prevents room drafts, reduces indoor moisture accumulation, and allows flexible horizontal or vertical venting paths through walls or roofs.
With dimensions of 16.38 inches deep, 35.63 inches wide, and 34 inches high, this fireplace is designed to be recessed directly into standard interior or exterior framed chase structures. At 96 pounds, the firebox requires solid floor support and secure anchoring to framing studs before finishing materials are applied.
Rough opening measurements will differ from the overall product dimensions to account for necessary clearance to combustible framing, venting adapters, and gas line entry points. Homeowners and contractors should review the manufacturer installation guide to ensure proper mantel clearances, wall-facing specifications, and direct-vent termination caps prior to closing the wall.
Frequently Asked Questions About Empire Tahoe Peninsula And See Through Fireplaces
What is the main structural difference between peninsula and see-through fireplaces?
Peninsula fireplaces feature three open viewing sides, whereas see-through models offer two viewing sides through an interior wall. A peninsula unit, like the Empire Premium 36-inch peninsula, extends outward into a living area with one finished end. A see-through unit mounts flush inside a dividing wall. Both layouts provide panoramic warmth similar to multi-sided visual layouts, but peninsula models require dedicated three-sided framing.
Do Empire Tahoe see-through fireplaces include burner logs?
No, Empire Tahoe clean-face see-through fireboxes typically require purchasing the log set or stone kit separately. Models such as the DVCP36SP70N include factory barrier screens, but you must select an approved log set or modern stone package to complete the burner bed. Always verify compatible burner media in the manufacturer specifications.
What is the difference between MV and IP ignition in 2026 Empire Tahoe Peninsula And See Through Fireplaces models?
Millivolt (MV) ignition uses a standing pilot that operates during power outages without household electricity, while intermittent pilot (IP) systems use an electronic spark to light the burner on demand. The IP design reduces fuel consumption by shutting down the pilot when idle. The MV design provides passive heat security during winter outages.
Can natural gas Empire Tahoe fireplaces run on liquid propane?
No, you cannot run a natural gas appliance on liquid propane without a manufacturer-specified conversion kit. Burner orifices, gas valves, and pilot assemblies are calibrated specifically for natural gas line pressures. Operating without the correct conversion kit can lead to soot buildup, high carbon monoxide levels, or burner malfunction.
Do direct-vent see-through gas fireplaces require protective safety screens?
Yes, current standards require protective barrier screens on all direct-vent glass viewing sides. Empire Tahoe units include two integrated barrier screens to lower burn risks from hot glass. Checking manufacturer specifications for fireplace barrier screens ensures reliable safety clearances while preserving broad room views.


Write Your Review
No reviews yet. Be the first to share your experience!