Ages 18-24? Explore Prime for Young Adults and see if you are eligible

Framing a dedicated gas hearth requires balancing chimney draft requirements with realistic heat expectations. Outdoor and transitional living spaces often demand specialized venting to keep exhaust moving upward cleanly without pulling smoke or combustion fumes back toward your seating area. Anyone researching a superior vo36nrrhb 36 b vent outdoor natural gas fireplace quickly discovers that venting classification dictates your entire framing layout, gas supply line sizing, and weatherproofing strategy. Checking burner specs, firebox dimensions, and clearance zones early saves you from costly carpentry rework later. If you are retrofitting or planning burner media inside an existing hearth cavity, learning how to measure your fireplace for gas logs provides a reliable starting point for cavity depth and clearance calculations.

Natural draft systems rely on vertical pipe runs to draw combustion byproducts outside, differing sharply from sealed direct-vent fireboxes or vent-free burners. While radiant units provide generous ambiance with glowing ember beds and realistic log arrangements, supplemental heat output depends heavily on whether your firebox uses an open face or sealed glass. The curated list below details top 36-inch natural gas options, comparing millivolt standing pilots, electronic intermittent ignition systems, and distinct venting configurations to help you select the right match for your project in 2026.

1
Best Seller

Empire Comfort Systems Deluxe 34-Inch Millivolt

Empire Comfort Systems
9.8 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The Empire Comfort Systems Deluxe MV 34-inch Natural Gas Fireplace is a built-in, louvered B-vent hearth appliance featuring reliable millivolt ignition. It provides a classic focal point and dependable room warmth for homeowners and remodelers with vertical flue venting access and dedicated natural gas lines.
Pros & Cons

Pros

  • Dedicated natural gas connection eliminates the need for liquid propane tank refills
  • Millivolt gas valve ensures operational reliability during winter electrical power outages
  • Louvered front louvers facilitate room air warming through natural convective circulation
  • Standard 34-inch framing scale pairs well with custom hearth cabinetry and mantels

Cons

  • Requires a dedicated vertical B-vent chimney pipe run and cannot be horizontally vented through a side wall
  • Factory set for natural gas and cannot use liquid propane without a verified manufacturer conversion kit
  • Requires professional gas plumbing, structural framing, and flue draft verification during setup
Detailed Review

The Empire Comfort Systems Deluxe MV 34-inch Louver B-Vent Fireplace is a permanent built-in natural gas hearth appliance engineered for homeowners, contractors, and remodelers seeking a traditional centerpiece. Designed specifically for vertical flue installations, this 34-inch unit is well suited for living rooms, family spaces, and finished basements where a dedicated vertical chimney run or B-vent chase is present or planned into the architectural framing.

As a natural-draft B-vent appliance, this unit utilizes the natural buoyancy of heated exhaust gases to safely vent combustion byproducts vertically through an approved B-vent pipe system. The millivolt control valve operates independently of the household power grid, meaning the standing pilot and main burner can be turned on during winter storm outages when supplemental room heating is most critical.

Empire Comfort Systems constructs the firebox chassis using durable, heavy-gauge steel finished with classic upper and lower louvers. The louvered styling serves a dual purpose by delivering a traditional fireplace appearance while allowing cool room air to enter the lower chamber, heat up against the firebox body, and gently recirculate into the living space via natural convection.

Installation requires planning for dedicated framing, a plumbed natural gas supply line, and proper vertical chimney clearances in accordance with the manufacturer instruction manual. Because B-vent systems draw air for combustion directly from inside the home and vent upward through the ceiling and roofline, maintaining proper flue draft and sufficient room air volume is essential for safe, consistent operation.

Prospective buyers should recognize that this fireplace is strictly configured for natural gas and requires vertical B-vent venting rather than horizontal direct-venting through an exterior wall. Liquid propane users must verify and purchase the appropriate manufacturer-approved fuel conversion kit before installing. In addition, local building codes should always be verified prior to ordering, as ventilation standards and natural-draft appliance rules vary across municipalities.

Overall, the Empire Comfort Systems Deluxe MV 34-inch B-Vent Fireplace offers a dependable, grid-independent hearth solution for residential projects with compatible vertical venting pathways. It combines trusted millivolt controls, classic convective louver styling, and standard 34-inch proportions to anchor any thoughtfully planned remodel or new construction project.

Fuel & Venting

This Empire Comfort Systems fireplace is factory-configured specifically for natural gas service. It connects directly to standard residential natural gas plumbing and is not interchangeable with liquid propane out of the box. Anyone planning to operate this unit on propane must verify and source an official manufacturer-approved conversion kit before installation.

The venting design is classified as B-vent, which operates via natural gravity draft rather than a mechanical fan or direct-vent coaxial pipe. B-vent appliances draw combustion air from within the room enclosure and vent exhaust gases vertically through an approved double-wall B-vent metal chimney pipe through the ceiling and roof line. It is not compatible with direct-vent horizontal wall terminations.

Installation & Framing

As a built-in gas fireplace, this 34-inch unit requires dedicated combustible framing, structural clearances, and custom finishing such as drywall, tile, stone, or a non-combustible surround. Installers must consult the official manufacturer manual for precise rough-opening framing dimensions, header heights, and minimum mantel clearances before constructing the enclosure.

Because gas supply lines and vertical B-vent flue routing require strict adherence to local mechanical codes, installation by a licensed gas fitter or qualified hearth technician is strongly recommended. Proper pipe sizing, manifold gas pressure checks, and draft testing ensure the appliance functions safely and reliably for years to come.

2
Editor's Pick

Empire Comfort Systems Deluxe MV 36-Inch Louver

Empire Comfort Systems
9.8 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The Empire Comfort Systems Deluxe 36-inch louvered B-vent fireplace provides dedicated natural gas operation with a standing millivolt ignition system. It is best suited for homeowners and remodelers building out a traditional gas hearth that can operate reliably even during power outages.
Pros & Cons

Pros

  • Millivolt control system operates independently of standard 120V household electricity
  • Classic black louvered exterior blends seamlessly into traditional living room decor and mantel surrounds
  • Substantial 39-inch outer width provides an expansive hearth presence
  • Natural gas configuration eliminates ash cleanup, chimney sweeping, and wood storage chores

Cons

  • Requires a dedicated vertical B-vent chimney pipe system rather than direct horizontal wall venting
  • Configured specifically for natural gas and does not include propane conversion parts in the product data
  • Framing rough openings, gas line plumbing, and vertical venting clearances require professional verification
Detailed Review

The Empire Comfort Systems Deluxe MV 36-inch Louver B-Vent Fireplace is a built-in natural gas hearth appliance designed for homeowners, builders, and remodelers planning a permanent installation. Featuring a classic black facade with upper and lower louvers, this model caters to buyers who want the timeless presence of a traditional fireplace paired with the daily convenience of natural gas.

Operation centers on a millivolt (MV) ignition system engineered for simple, dependable use. Because the millivolt generator produces its own low-voltage electrical current directly from the standing pilot flame, the fireplace does not rely on an external household power connection to open the main gas valve. Homeowners in storm-prone regions benefit directly from this setup, as the fireplace can provide fireside operation even during grid outages.

Construction features a sturdy steel enclosure with an exterior black finish, bringing total product weight to 95 pounds. The unit measures 18.37 inches in depth, 39 inches in width, and 34.68 inches in height. Its integrated louvered front facilitates steady airflow around the firebox cabinet, allowing heat to disperse naturally into the living area without requiring an active mechanical blower right out of the box.

As a B-vent appliance, this fireplace relies on natural gravity draft to exhaust combustion byproducts through a dedicated vertical pipe run terminating above the roofline. Prospective buyers must distinguish physical unit dimensions from required framing rough openings. Framing dimensions, combustible standoff distances, and vertical pipe clearances must be cross-referenced with manufacturer installation manuals before framing the enclosure.

A few practical limitations should be noted before purchasing. The product data does not list included gas logs, decorative media, or remote controls, requiring buyers to verify what interior components are included or sold separately. Additionally, because this model is engineered strictly for natural gas, any buyer with liquid propane service must confirm factory kit availability rather than attempting unapproved fuel modifications.

For homeowners looking to complete a living room renovation or new construction project with a traditional built-in gas hearth, the Empire Comfort Systems Deluxe 36-inch B-vent fireplace offers dependable mechanical controls and classic styling. Its grid-independent operation and substantial 36-inch format make it a strong option where vertical flue routing is available.

Fuel & Venting

This Empire Comfort Systems fireplace is configured specifically for residential natural gas supply lines. Natural gas provides a continuous, piped fuel source that eliminates the need for external fuel tanks, manual refueling, and seasonal wood handling.

The B-vent design requires a dedicated vertical pipe run terminating above the roof structure. Unlike direct-vent systems that draw outside air through a co-axial pipe, B-vent systems pull room air for combustion and rely on thermal draft to lift exhaust safely through the double-wall flue. Ensure all local mechanical codes and vertical clearance parameters are met during installation planning.

Fit & Dimensions

Product dimensions measure 18.37 inches deep, 39 inches wide, and 34.68 inches high, with a total assembled shipping weight of 95 pounds. The 36-inch size refers to the nominal width class of the firebox.

Framing rough openings must be sized larger than the exterior cabinet dimensions to account for non-combustible clearances and required standoffs. Always consult the official Empire Comfort Systems framing manual before cutting studs or constructing non-combustible hearth extensions.

3
Limited Time

Majestic Quartz 36-Inch Direct Vent Natural Gas

HHT Majestic
9.8 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The Majestic Quartz 36-Inch Direct Vent Fireplace is a built-in natural gas hearth appliance featuring an IntelliFire electronic ignition system for dependable, on-demand operation. It is an ideal fit for homeowners, remodelers, and builders seeking a clean-burning direct-vent gas unit for a living room wall or media build-out.
Pros & Cons

Pros

  • Direct-vent sealed combustion architecture exhausts all emissions directly to the outdoors.
  • IntelliFire electronic ignition provides reliable burner starts without the waste of an all-day standing pilot light.
  • Compact 16.31-inch depth simplifies framing into shallow interior walls or corner bump-outs.
  • Eliminates the ash handling, soot accumulation, and chimney maintenance typical of wood fireplaces.
  • Factory-designed compatibility for an optional circulation blower kit.

Cons

  • Requires professional installation for natural gas line connections, exterior venting runs, and electrical wiring.
  • Circulating blower is not included in the base package and must be purchased separately as an add-on option.
  • Factory-configured for natural gas; liquid propane conversion compatibility is not documented in the listing.
Detailed Review

The Majestic Quartz 36-Inch Direct Vent Fireplace (model QUARTZ36IN / 36N) is a built-in natural gas hearth appliance engineered for homeowners, builders, and remodelers looking to integrate a permanent gas heating feature into a living room or family room. As a direct-vent unit, it draws combustion air from outdoors and vents exhaust through a dedicated pipe system, making it an excellent choice for modern, tightly insulated homes where indoor air quality is a top priority.

In terms of operation, this model utilizes Majestic's IntelliFire electronic ignition system. Unlike older manual gas fireplaces that burn a standing pilot light around the clock, an intermittent pilot ignition operates on demand, helping conserve natural gas when the fireplace is not actively in use. The front viewing area is built around a standard 36-inch platform, offering an authentic fireplace presentation with natural gas flames that activate smoothly without the smoke, draft issues, or wood replenishment associated with open wood-burning fireboxes.

The unit features a durable steel firebox design measuring 41 inches in width, 16.31 inches in depth, and 37.63 inches in height. Its relatively shallow footprint of under seventeen inches makes it well suited for interior bump-out chase walls, media wall integration, or corner framing projects where floor space is at a premium. The construction supports standard decorative hearth framing, though prospective buyers must ensure proper clearances to combustible materials are respected around the outer chassis.

Installation of the Quartz 36 requires professional trade coordination, as it involves connecting a dedicated natural gas supply line, running approved direct-vent chimney pipe to an exterior wall or roof penetration, and setting up electrical connections for the IntelliFire ignition module. Buyers planning their project should note that while the unit is designed to support an optional circulating blower, that blower fan is an add-on accessory rather than standard equipment, so ordering it upfront alongside the firebox is recommended if supplemental air circulation is desired.

A primary limitation to consider is that the product specifications explicitly designate this as a natural gas appliance. Anyone planning to use liquid propane must verify conversion kit availability with the manufacturer or a licensed gas technician before purchasing. Furthermore, because manufacturer rough-opening requirements, venting run limits, and finishing clearances are distinct from the outer dimensions of the unit, consulting the official installation manual prior to framing is mandatory.

For homeowners seeking a dependable, clean-burning natural gas fireplace from an established hearth manufacturer, the Majestic Quartz 36 offers an appealing balance of traditional scale and modern direct-vent functionality. It stands out as an attractive upgrade for renovations and new additions, provided you budget for professional installation, venting components, and the optional blower fan if active heat circulation is preferred.

Fuel & Venting

This Majestic Quartz model operates exclusively on natural gas out of the box and utilizes an IntelliFire electronic ignition system to initiate the flame on demand. Operating on natural gas ensures a steady, uninterrupted fuel source without the ongoing handling, soot buildup, or wood ash cleanup required by open hearths.

As a direct-vent appliance, the Quartz 36 requires co-axial or approved direct-vent piping directed to an exterior wall or roof termination. Direct-vent architecture isolates the combustion chamber from indoor living spaces by drawing combustion air from outside and expelling exhaust gas directly outdoors, which supports clean indoor air and complies with modern building codes for sealed gas appliances.

Fit & Dimensions

The exterior chassis of the Majestic Quartz 36 measures 41 inches wide, 16.31 inches deep, and 37.63 inches high, centered around a 36-inch nominal front viewing format. These physical dimensions make it an efficient candidate for shallow framing chases, standard wall recesses, and built-in architectural features.

Installers must differentiate between the unit dimensions and the required rough framing dimensions. Always consult the official manufacturer framing manual to confirm required clearances to combustible wall studs, header heights, mantel standoffs, and hearth extension parameters before framing begins.

4
Top Rated

Empire Comfort Systems 36-Inch Direct-Vent Natural

Empire Comfort Systems
9.8 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The Empire Comfort Systems Premium 36-inch Direct-Vent Natural Gas Fireplace is a built-in hearth featuring millivolt controls, a pre-installed variable-speed blower, and a herringbone brick liner. It is best suited for homeowners and remodelers seeking a reliable natural gas fireplace who are prepared to select a separate decorative screen or door kit.
Pros & Cons

Pros

  • Includes the burner, log set, tempered glass, and herringbone ceramic fiber liner in the box
  • Features an integrated variable-speed blower with a temperature switch for active air circulation
  • Millivolt control system allows standard fireplace operation even during electrical power outages
  • Substantial 36-inch framing size delivers a prominent, traditional fireplace visual profile

Cons

  • Requires a separate purchase of a mandatory fireplace barrier screen or door set to finish the unit
  • Designed specifically for natural gas and requires dedicated direct-vent pipe installation
  • At 138 pounds, handling and framing require careful planning and multi-person positioning
Detailed Review

The Empire Comfort Systems Premium 36-inch Direct-Vent Natural Gas Fireplace (Model DVP36FP31N-DVP36D2H) is a built-in appliance built for homeowners and remodelers looking for a permanent natural gas hearth. It brings together essential heating and aesthetic elements, delivering an authentic masonry appearance inside a modern zero-clearance steel chassis.

Warm air delivery and basic heating operation are assisted by the included variable-speed blower, which features a thermal switch that activates based on firebox heat. The millivolt control valve provides reliable burner ignition and heat operation without relying on household electrical power, keeping the primary flame functional during storm-related power interruptions. As a direct-vent unit, it isolates combustion from the interior living space by venting exhaust gases through exterior-grade direct-vent piping.

Interior build quality centers on an authentic hearth aesthetic, highlighted by a molded herringbone ceramic fiber brick liner that lines the firebox walls. The package includes the dedicated gas burner, realistic log components, and tempered glass front panel designed to withstand regular operational temperatures while maintaining a clean view of the fire.

Framing and rough-in planning must accommodate overall dimensions of 37.62 inches high, 39 inches wide, and 19.87 inches deep, alongside a total weight of 138 pounds. Because this is a permanent built-in natural gas unit, rough opening clearances, gas supply lines, and outdoor vent terminations must follow manufacturer instructions and local mechanical codes closely.

A necessary limitation to prepare for is that the fireplace requires the separate purchase of an approved barrier screen or decorative door set with a barrier frame to complete the installation. Furthermore, specific BTU ratings and precise rough framing dimensions are not detailed in the summary listing and should be verified in the manufacturer installation manual prior to cutting wall studs.

For homeowners planning a living room remodel or custom media surround, this Empire Comfort Systems fireplace offers a dependable, well-accessorized natural gas foundation. The inclusion of the blower assembly, log set, and brick liner makes it a practical choice for buyers seeking traditional charm, provided they budget for the required decorative barrier trim.

Fuel & Venting

This fireplace model is engineered specifically for natural gas supply lines and must be connected to an approved direct-vent chimney pipe system. Direct-vent technology uses a co-axial or co-linear pipe configuration to pull fresh combustion air from outside while exhausting spent gases directly through an exterior wall or roof termination.

Natural gas hookups must be planned with appropriate shutoff valves and pipe diameters matching local building codes. Because conversion kits or alternate fuel setups are not specified in the product data, buyers must confirm natural gas availability at their property before purchasing.

Blower & Controls

The included millivolt control valve uses a standing pilot and thermopile to generate small electrical currents that operate the gas valve, ensuring functional heat even during local electrical outages. This design allows reliable manual or wall-switch operation without complex electronic boards.

An integrated variable-speed blower assembly comes pre-packaged with the unit to improve warm air convection. The included temperature switch monitors firebox heat, preventing the blower from circulating cool air until the combustion chamber reaches an appropriate operating temperature.

Fit & Dimensions

The exterior chassis measures 37.62 inches in height, 39 inches in width, and 19.87 inches in depth, representing a standard 36-inch nominal fireplace opening class. The complete assembly weighs approximately 138 pounds, requiring sturdy framing and floor support.

Final framing dimensions and combustible clearance distances must be checked directly against the official Empire installation guide. Adequate perimeter clearance must also be reserved to accommodate the required decorative barrier screen or door kit chosen to complete the unit.

5

Empire Boulevard 36-Inch Vent-Free Natural Gas

Empire Comfort Systems
9.5 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The Empire Boulevard 36-Inch Vent-Free Natural Gas Linear Fireplace delivers a sleek modern flame display without the structural need for exterior chimney venting. Featuring an intermittent pilot system and a thermostat variable remote, it is an ideal choice for homeowners and remodelers building a custom contemporary hearth wall where venting is impractical.
Pros & Cons

Pros

  • Vent-free architecture eliminates chimney construction, wall cutting, and exterior exhaust pipe installation
  • Includes an intermittent pilot system paired with a variable thermostat handheld remote control
  • Provides a wide, modern 36-inch linear firebox format for contemporary custom wall enclosures
  • Modular design accommodates separate decorative liners, trim surrounds, and media packages for personalized styling

Cons

  • Vent-free gas appliances are subject to regional code restrictions and are prohibited in certain U.S. jurisdictions and room types
  • Decorative liners, trim kits, and burner media are sold separately and must be purchased to complete the finished look
  • Framing dimensions, non-combustible clearances, and exact BTU output are not provided in the primary specifications and require manual verification
Detailed Review

The Empire Comfort Systems Boulevard 36-Inch Vent-Free Natural Gas Linear Fireplace is a built-in hearth appliance designed for remodelers, builders, and homeowners seeking a wide-format focal point without the structural complication of an exterior chimney. Operating as a vent-free natural gas system, this unit provides an installation pathway for interior walls and room layouts where running vertical venting through a roof or horizontal pipes through an outside wall is not feasible. It is tailored for households with a dedicated natural gas supply seeking a clean, horizontal flame presentation.

Operation is centered on a contemporary burner controlled by an intermittent pilot (IP) ignition system and an included thermostat variable remote control. The intermittent pilot configuration sparks the burner only when heat or flame is requested, avoiding the continuous fuel use of an active standing pilot. Handheld remote control allows users to adjust flame height and manage room comfort via thermostatic control. Because exact BTU ratings and heating area limits are not detailed in the raw product specifications, buyers should verify the thermal output against the room cubic footage to ensure balanced warmth.

The outer firebox is constructed with a durable black finish, measuring 45 inches long, 15 inches wide, and 24 inches high, and weighs 95 pounds. The internal linear burner stretches across the 36-inch opening to create an even, horizontal flame pattern. Empire Comfort Systems builds this model as a customizable unit, leaving aesthetic finish selections open. Interior reflective or ceramic liners, finishing trim pieces, and decorative burner media such as fire glass or stone kits are sold separately, giving buyers freedom to personalize the interior aesthetic.

Installation involves framing the appliance into a wall cavity or custom enclosure and connecting it to a licensed natural gas supply line and appropriate electrical supply for the intermittent pilot control. The listed dimensions of 45 by 15 by 24 inches reflect the unit exterior, meaning rough framing dimensions and clearances to combustible materials must be confirmed directly from the manufacturer installation instructions. Because vent-free gas appliances release combustion air directly into the room, buyers must also ensure the installation space meets minimum room volume requirements.

Practical limitations focus on code compliance, fuel requirements, and out-of-the-box completeness. Vent-free appliances face strict local building code regulations across various U.S. states and municipalities, and they may be restricted in smaller spaces such as bedrooms or bathrooms. Additionally, this model is built for natural gas, so it cannot be used with liquid propane without verified factory conversion equipment. Buyers should also budget for essential finishing accessories, as trim, liners, and burner media must be purchased separately.

For homeowners planning a contemporary fireplace build where vent routing is structurally impossible, the Empire Boulevard 36-inch linear fireplace is a solid, feature-rich choice. It combines the aesthetic of modern linear flames with the energy efficiency of vent-free gas operation and remote thermostat control. Always check local municipal codes, verify required framing clearances, and budget for your selected decorative media to complete the setup.

Fuel & Venting

This Empire Boulevard fireplace is configured specifically for natural gas line hookups and cannot be used with alternative fuels unless an approved manufacturer conversion kit is verified. A licensed professional should handle the gas supply line connection to ensure correct operating pressure and leak-free performance.

The vent-free classification means this unit does not use a chimney, B-vent, or direct-vent pipe to exhaust byproducts outside. While this ensures virtually all heat stays within the living space, vent-free appliances must comply with strict local building codes. Homeowners must verify municipal legality and room volume guidelines before purchasing or framing this appliance.

Remote & Controls

This fireplace includes an intermittent pilot (IP) ignition system, which electronically lights the burner on demand. This setup prevents continuous gas consumption during off cycles compared to standard millivolt standing pilot lights.

A thermostat variable remote control is supplied with the unit, allowing handheld operation from anywhere in the room. The remote manages ignition, flame height adjustment, and temperature regulation to maintain a comfortable ambient room temperature.

Installation & Fit

The exterior chassis dimensions are 45 inches in length, 15 inches in width, and 24 inches in height, with a total weight of 95 pounds. These numbers represent the appliance itself and should not be used as rough framing opening dimensions.

Custom enclosures require strict adherence to the manufacturer clearance guidelines for non-combustible facing, mantel heights, and side wall clearances. Additionally, decorative interior liners, burner media, and outer trim kits are sold separately and must be planned into the final installation budget.

6

Superior 36-Inch BRT4536 B-Vent Radiant Gas

North Country Fire
9.5 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The Superior BRT4536 is a 36-inch B-vent radiant gas fireplace delivering up to 40,000 BTUs with an authentic split oak log set and white herringbone refractory panels. It is an ideal fit for homeowners and remodelers seeking a classic masonry look with the convenience of gas and natural draft vertical venting.
Pros & Cons

Pros

  • Produces up to 40,000 BTUs of radiant heat paired with dramatic yellow flames and glowing embers
  • High-end hearth appearance with white herringbone refractory brick-look interior and ceramic split oak logs
  • Retractable fire screens slide smoothly into hidden pockets for an unobstructed firebox opening
  • Pre-wired dual-access J-box and optional outside air kit support flexible rough-in planning
  • Generous 20-year limited warranty provides long-term peace of mind

Cons

  • B-vent configuration requires dedicated vertical chimney/pipe venting and cannot be vented horizontally through an exterior wall
  • Specific gas fuel type (natural gas or liquid propane) and framing dimensions must be verified prior to ordering
  • Handheld remote control and outside air kit are optional accessories sold separately
Detailed Review

The Superior BRT4536 is a 36-inch radiant gas fireplace built for homeowners, builders, and remodelers seeking the visual impact of an open masonry fireplace combined with modern gas operation. Designed around a B-vent natural-draft exhaust system, this unit is well-suited for living rooms, family rooms, or great rooms where vertical ducting through a roof or existing chimney chase is planned. It delivers a robust radiant heat output rated up to 40,000 BTUs, providing significant supplemental zone heating while maintaining a distinct focal point in traditional or transitional home designs.

Visual ambiance is one of the standout aspects of the BRT4536. The firebox features a dual tube burner system engineered to produce tall, dramatic yellow flames that move naturally across a glowing ember bed. Resting over the burner is a detailed ceramic fiber split oak log set complete with an integrated heavy-duty log grate. Unlike shallow units that look flat, the combination of realistic log sculpting, deep ember glow, and dynamic flame movement closely replicates the appearance of a true wood-burning hearth.

Interior styling and hardware details reflect a clean, upscale aesthetic. The firebox is lined with white herringbone refractory panels that brighten the interior even when the burner is unlit and give the fireplace an architectural masonry profile. The exterior features a durable textured powder coat finish designed to withstand heat and routine handling. Additionally, the fire screens retract completely into hidden side pockets, allowing homeowners to enjoy a clear, open view of the fire without loose screens cluttering the front face.

Operational convenience and utility rough-ins are designed to simplify framing and ongoing use. The BRT4536 supports either a millivolt remote-ready system or electronic ignition, depending on the chosen configuration, while gas controls are tucked away out of plain sight. For safety, an integrated damper safety switch helps prevent improper operation. Electricians and contractors will appreciate the pre-wired dual-access electrical J-box, which provides wiring flexibility during rough framing. For tighter modern building envelopes, an optional outside air kit can be added to support overall combustion performance.

Before purchasing, buyers must consider important venting and fuel parameters. Because this is a B-vent appliance, it operates on natural draft and requires vertical metal B-vent pipe routed through the roofline; it cannot be direct-vented horizontally through a side wall like direct-vent sealed units. Buyers must also verify whether their specific order configuration is factory-set for natural gas or propane, and check local building codes regarding B-vent installation clearances, hearth extensions, and framing dimensions.

For homeowners who have vertical venting access and want the open look of a traditional wood fireplace with the push-button ease of gas, the Superior BRT4536 offers an appealing balance of performance and aesthetics. With its 40,000 BTU rating, striking white herringbone interior, realistic split oak log display, and a 20-year limited warranty, it represents a substantial and lasting upgrade to any primary living space.

Fuel & Venting

The Superior BRT4536 is engineered specifically as a B-vent gas fireplace, meaning it relies on natural draft to exhaust combustion gases vertically through dedicated B-vent metal piping out through the roof. It is not a direct-vent or vent-free fireplace, so horizontal termination through an exterior wall is not permissible.

The unit delivers up to 40,000 BTUs of radiant heat output. Safe operation is reinforced by an integrated damper safety switch and a hidden gas control layout. Because gas appliances are manufactured for specific fuel supplies, buyers should confirm whether the unit is set up for natural gas or propane before placing an order, and consult local building codes for proper vertical flue height and framing clearances.

Flame & Ambiance

Ambiance is driven by a dual tube burner system engineered to generate tall, luminous yellow flames that wrap around the log set. Accompanied by a glowing ember bed, the flame effect creates realistic fire presentation across the entire 36-inch opening.

The included ceramic fiber split oak log set rests on a dedicated log grate, providing realistic bark texture and coloration. Framing the display are white herringbone refractory panels that deliver a refined, classic masonry appearance, while retractable firescreens tuck away into hidden pockets to ensure unobstructed viewing.

Warranty & Support

The Superior BRT4536 comes backed by a 20-year limited warranty from the manufacturer, reflecting its durable heavy-gauge steel construction and quality refractory materials.

To ensure long-term reliability and compliance with warranty terms, installation should be handled by a qualified gas specialist according to the manufacturer manual and applicable municipal building codes. Replacement parts and accessories, such as optional remote controls and outside air kits, are supported across the product line.

7

Empire Comfort Systems Deluxe 34-Inch Louvered

Empire Comfort Systems
9.4 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The Empire Comfort Systems Deluxe IP 34-inch B-vent fireplace is a 21,000 BTU natural gas appliance equipped with intermittent pilot ignition and a hand-painted ceramic fiber log set. It suits remodelers and homeowners seeking a classic louvered gas hearth that provides balanced warmth and steady flame ambiance without overheating medium-sized rooms.
Pros & Cons

Pros

  • Intermittent Pilot Ignition reduces gas consumption by eliminating a continuous standing pilot
  • Includes a hand-painted ceramic fiber log set designed specifically for this firebox
  • B-vent configuration provides authentic open-draft gas flames with a balanced 21,000 BTU output
  • Traditional louvered face promotes natural air circulation around the firebox

Cons

  • Decorative interior liner is not included and must be purchased separately
  • Requires a dedicated vertical B-vent pipe installation through the ceiling or roof
  • Configured strictly for natural gas connections with no factory propane kit included
Detailed Review

The Empire Comfort Systems Deluxe IP 34-inch Louver B-Vent Fireplace is a traditional built-in natural gas hearth appliance engineered for homeowners and remodelers seeking supplemental heating with classic hearth styling. Delivering 21,000 BTUs of thermal output, this unit is designed to provide steady warmth while allowing extended flame operation without quickly overheating standard living spaces.

Operating on natural gas, the unit features an Intermittent Pilot Ignition (IPI) system paired with an on/off switch, which conserves fuel by eliminating the need for a continuously burning standing pilot. Its specialized B-vent burner system is calibrated to optimize combustion aesthetics, providing an attractive flame profile that dances naturally through the included hand-painted ceramic fiber logs.

The fireplace construction incorporates a durable black metal chassis with traditional upper and lower louvers that facilitate room air convection around the firebox. Inside, the ceramic fiber log set is molded and detailed to replicate authentic split firewood, though buyers should note that decorative interior firebox liners are sold separately if a brick or reflective interior look is desired.

Exterior cabinet dimensions measure 37 inches wide by 14.87 inches deep and 32.68 inches high, with a total unit weight of 75 pounds. Because this is a vented B-vent appliance, installation requires a dedicated vertical B-vent pipe system through a roof or approved chase, alongside a hard-piped natural gas supply line. Rough framing dimensions and clearances to combustibles must be confirmed against the manufacturer installation manual prior to rough-in.

Buyers must account for venting and fuel constraints before purchasing, as this model requires vertical B-venting and cannot be installed with direct-vent horizontal wall caps or operated as a vent-free system. Additionally, the appliance is configured specifically for natural gas, meaning liquid propane households will need to verify whether a certified conversion kit exists before ordering.

For homeowners planning a traditional hearth build or remodeling an existing chimney run using B-vent piping, this Empire Deluxe fireplace offers a dependable, well-proportioned gas hearth solution. It combines modern electronic ignition convenience with realistic log visuals and balanced 21,000 BTU heating performance.

Fuel & Venting

This Empire Comfort Systems fireplace is configured specifically for natural gas and requires a dedicated, code-approved B-vent chimney pipe installation. Unlike direct-vent systems that vent horizontally through exterior walls, B-vent appliances utilize vertical pipe to exhaust combustion byproducts via natural gravity draft.

Fuel conversion to liquid propane is not indicated in the standard product data, so buyers needing propane fuel should verify factory-approved conversion parts with the manufacturer prior to purchase. All gas line plumbing and vertical venting runs should adhere strictly to local building codes and manufacturer clearances.

Fit & Dimensions

The outer dimensions of this fireplace measure 37 inches in width, 14.87 inches in depth, and 32.68 inches in height, with an overall weight of 75 pounds. The 34-inch designation reflects the nominal firebox viewing class rather than outer cabinet dimensions.

Framing cutouts, mantel clearances, and hearth extension requirements exceed outer unit measurements to maintain safe distances from combustible building materials. Review the official manufacturer installation manual to confirm rough opening framing dimensions before constructing enclosures or ordering custom surrounds.

8

Sierra Flame Palisade 36-Inch Direct Vent Natural

Sierra Flame
9.4 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The Sierra Flame Palisade 36-inch See-Thru Fireplace is a direct-vent natural gas linear unit designed to showcase an open flame between two adjoining rooms. Equipped with electronic ignition, included fire glass, rocks, and a remote control, it best suits remodelers and homeowners looking to build an architectural double-sided feature wall.
Pros & Cons

Pros

  • Double-sided see-through configuration enhances two living spaces with one fireplace
  • Bundled with both fire glass and stone rock media alongside a wireless remote control
  • Clean-face aesthetic with tempered glass fits seamlessly into contemporary drywall or tile surrounds
  • Electronic ignition simplifies day-to-day operation

Cons

  • Requires professional natural gas plumbing and dedicated direct-vent pipe routing
  • Manufacturer specifications do not list explicit BTU ratings or heating square footage guidance
  • Double-sided installation demands precise wall depth and structural framing planning
Detailed Review

The Sierra Flame Palisade 36-inch See-Thru Direct Vent Linear Fireplace is a built-in natural gas hearth appliance engineered to sit inside an interior partition wall. By featuring dual-sided tempered glass viewports, this unit is best suited for homeowners, remodelers, and custom home designers aiming to connect two adjoining living areas, such as a living room and dining room or a bedroom and sitting room, with a shared architectural hearth.

Powered specifically by natural gas, this linear fireplace relies on a direct-vent system to draw combustion air from outside while safely venting exhaust gases outdoors. Ignition is controlled through an electronic ignition assembly, eliminating the constant gas consumption of an older standing pilot. While the manufacturer does not supply specific BTU heat ratings or square-foot heating estimates in this listing, the direct-vent linear burner provides focused ambiance and flame warmth across both viewing faces.

Construction quality centers around a 105-pound black steel chassis with a clean-face surround. This border design minimizes visible sheet metal trim, directing visual attention straight onto the linear flame and decorative interior bed. To help tailor the hearth to your interior decor, Sierra Flame packages the fireplace with both contemporary fire glass and a natural rock media set.

Regarding dimensions and installation, the Palisade measures 10.87 inches deep, 39.5 inches wide, and 32 inches high. Installing a see-thru direct-vent fireplace requires exact framing cutouts to account for both finished wall surfaces, properly sloped venting pipes, and a plumbed natural gas line. Day-to-day operation remains effortless thanks to the included handheld remote control, allowing users to start and manage the fireplace from the couch.

Buyers should verify several logistical details before ordering. The product data does not specify rough framing dimensions, BTU output limits, or whether a liquid propane conversion kit is supported. Because gas line sizing, combustible clearances, and venting lengths are dictated by manufacturer manuals and local building codes, planning the installation with a certified gas professional is essential.

For homeowners planning an open-concept partition wall, the Sierra Flame Palisade 36 provides an eye-catching focal point. Its included media options, modern clean-face look, and remote convenience make it a solid choice for dual-room ambiance.

Fuel & Venting

The Sierra Flame Palisade operates exclusively on natural gas as listed. It is not configured for liquid propane in this specification, so buyers must verify whether official conversion kits exist if propane is their primary fuel source.

Because this is a direct-vent fireplace, it utilizes a sealed combustion chamber. Direct-vent pipes must be routed through an exterior wall or roof following manufacturer draft and clearance guidelines, maintaining indoor air quality by isolating combustion gases from the room.

Fit & Dimensions

The exterior product dimensions measure 10.87 inches deep, 39.5 inches wide, and 32 inches high, with a total unit weight of 105 pounds.

Because these numbers represent the fireplace body rather than the rough framing opening, remodelers must consult the official Sierra Flame framing manual to confirm required stud spacing, header heights, and non-combustible finishing clearances for both wall sides.

Helpful Insights on Superior Vo36nrrhb 36 B Vent Outdoor Natural Gas Fireplace

What distinguishes a B-vent natural gas fireplace from a direct-vent model?

B-vent fireplaces rely on standard vertical pipe venting that draws room air for combustion, whereas direct-vent models use a sealed co-axial pipe to pull outside air and exhaust combustion gases. The pipe on a B-vent unit must terminate vertically through the roof to establish a natural thermal draft. Direct-vent fireplaces feature sealed glass fronts, while B-vent systems often operate with open fronts or mesh pull screens. Verifying your wall structure and roof clearance determines which venting method suits your home layout.

Can you install a natural gas B-vent fireplace outdoors or in semi-covered patios?

Outdoor installation is permissible only if the manufacturer specifically rates the unit for exterior or weather-exposed environments. Standard indoor B-vent fireplaces lack the weatherproofing and draft controls necessary to withstand wind gusts and moisture. Placing an unrated indoor firebox outdoors can cause burner corrosion and frequent pilot outages. Always check the model rating plate and local building codes for required roof overhangs and moisture protection before installing outdoors.

How does millivolt ignition compare to intermittent pilot ignition on gas fireplaces?

Millivolt systems operate a continuous standing pilot using a thermopile to generate low-voltage electricity, allowing the fireplace to function during power outages without household wiring. Intermittent pilot ignition (IPI) lights the pilot electronically only when you turn the unit on, conserving fuel when idle. An IPI system usually requires an electrical connection or backup battery pack. Your choice between them often comes down to off-grid reliability during storms versus standby energy savings.

Does a 36-inch B-vent gas fireplace require a protective hearth extension?

Yes, most building codes and manufacturers require non-combustible floor protection extending in front of an open-faced gas appliance. Understanding what is A fireplace hearth helps you determine the required thickness and extension distance for combustible flooring. Radiant models with open screens radiate heat directly forward, meaning rugs or hardwood flooring placed too close risk thermal degradation. Always review the framing manual for exact clearance to combustibles in front of the firebox opening.

Can a natural gas fireplace run on liquid propane without modifications?

No, natural gas fireplaces cannot operate on liquid propane without an approved manufacturer conversion kit. Natural gas operates at lower delivery pressure than propane and utilizes larger burner orifices. Running propane through a factory natural gas valve creates severe overfiring and hazardous soot accumulation. Confirm whether the specific 36-inch model supports field conversion before ordering parts or running your fuel line.