Ages 18-24? Explore Prime for Young Adults and see if you are eligible

Traditional open hearths lose most of their radiant warmth directly up the flue, leaving living areas chilly despite burning pile after pile of split firewood. Installing a custom firescreen spitfire 6 tube fireplace heater with blower reclaims that wasted energy by drawing cold room air through heat-exchanger tubes positioned under the fire bed and pushing heated air back into your living space. Much like maintaining proper draft balance with protective chimney covers, circulating heat effectively requires matching the right hardware to your firebox. Whether you need an entire multi-tube hearth exchanger or a direct motor swap, matching physical hearth dimensions and motor specifications prevents costly installation headaches.

Upgrading an existing firebox with forced-air circulation delivers substantial supplemental heat to living rooms without demanding major structural remodeling. Similar to replacing worn electrical components like dedicated heater assemblies, upgrading a wood-burning hearth with tubular exchangers or replacement squirrel-cage fans requires careful attention to electrical leads, flange sizes, and clearance depth. Looking closely at steel tube thickness, airflow ratings measured in CFM, and speed controls ensures you select dependable equipment that enhances comfort throughout winter.

1
Best Seller

Woodeze Spitfire 6-Tube Fireplace Hearth Heater

Woodeze
9.9 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The Woodeze Spitfire Fireplace Heater is a heavy-gauge aluminized steel hearth heat exchanger designed to pull heat from open fireplaces and circulate up to 45,000 BTUs into your living space. It is an ideal supplemental heating solution for fireplace owners wanting more warmth without replacing their hearth with a permanent insert.
Pros & Cons

Pros

  • Heavy-duty aluminized steel tubing resists prolonged high-heat firebox exposure
  • Two-speed blower gives easy manual adjustment over warm air distribution
  • Listed 45,000 BTU capacity helps salvage heat normally lost up the flue
  • Substantial 41-pound weight stays firmly situated on the fireplace floor

Cons

  • Requires nearby electrical access on or near the hearth to run the blower fan
  • Dimensions of 28 x 11 x 17 inches require careful verification against interior firebox clearances
  • Blower decibel levels and CFM airflow ratings are not specified in the product data
Detailed Review

The Woodeze Spitfire Fireplace Heater is an active hearth heat exchanger built for homeowners who want to transform an inefficient open fireplace into a productive supplemental heat source. Most standard open fireplaces lose the vast majority of their thermal output through the chimney flue. This 6-tube steel unit rests inside the hearth, capturing heat directly from the fire and redistributing it into the room via an integrated blower fan.

Equipped with a listed heating output of up to 45,000 BTUs, this heater relies on six heavy-gauge aluminized steel tubes to transfer heat efficiently. As wood burns, the surrounding tubes absorb energy, allowing the built-in blower to draw cooler room air in through the lower intake and exhaust hot air back into the living area. The inclusion of a 2-speed blower switch lets users tailor airflow between a quiet, gentle breeze and higher-volume air circulation for quicker warming.

Build quality centers around high-temperature resilience, utilizing aluminized steel to resist thermal stress and corrosion over repeated heating cycles. Weighing in at 41 pounds, the unit has enough heft to remain securely seated on the fireplace floor without shifting during loading or routine wood tending. Its metallic industrial finish blends naturally with firebrick and cast-iron fireplace accessories.

With exterior dimensions of 28 inches in length, 11 inches in width, and 17 inches in height, this heater is marketed for smaller hearth footprints, dens, and cabins. However, prospective buyers need to verify that their firebox provides adequate depth, height, and width to accommodate both the tube rack and surrounding firewood safely. Operating the 2-speed blower also requires proximity to a standard electrical outlet, meaning power routing across the hearth must be planned in advance.

Potential buyers should note that specific electrical draw, power cord length, and fan airflow ratings (CFM) are omitted from the manufacturer specifications. Furthermore, this device functions as a supplemental heat circulator rather than a whole-home heating appliance, and total heat production depends on the size and intensity of the fire built on or around the tubes.

Overall, the Woodeze Spitfire is a well-built, practical upgrade for fireplace owners who love the ambiance of an open wood fire but want to recover usable warmth. For cabins, family rooms, and zone-heating applications with compatible firebox dimensions, it offers a functional alternative to high-cost structural fireplace inserts.

Fit & Dimensions

The Woodeze Spitfire Fireplace Heater measures 28 inches long, 11 inches wide, and 17 inches high, with a total weight of 41 pounds. These measurements encompass the full tubing assembly and blower configuration.

Before purchasing, homeowners must measure the internal floor width, rear taper, minimum height, and usable depth of their existing fireplace cavity. Adequate clearance must remain around the tubes to allow proper wood placement and prevent contact with fireplace doors or screens.

Blower & Airflow

This hearth heater incorporates a two-speed blower designed to force air through the six aluminized steel heat-exchange tubes. The dual-speed control gives users the flexibility to dial in gentle, continuous circulation or switch to high speed when rapid room warming is needed.

Because the unit relies on an electric motor to circulate warmed air, buyers should ensure an accessible power source is available near the hearth. Always route electrical cords safely away from direct flame, hot coals, and radiant heat sources.

2
Editor's Pick

Rotom Replacement Fireplace Blower for Osburn

Rotom
9.5 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
This Rotom replacement fireplace blower is designed for select Osburn, Nordica, Valley Comfort, and Pacific stoves needing restored warm-air circulation. Featuring a 2-speed, 115-volt skeleton motor delivering 80 or 135 CFM, it is an ideal fix for fireplace owners comfortable connecting raw power leads to their existing setup.
Pros & Cons

Pros

  • Offers two distinct speed settings (80 CFM and 135 CFM) to match your circulation needs
  • Matches factory opening dimensions (two 1 x 4-7/8 inch outlets) on compatible brand models
  • Low 0.92-amp power draw runs efficiently on standard 115V household electrical circuits
  • Includes a 1-year manufacturer warranty for purchase protection

Cons

  • Comes with power leads only, requiring manual wiring rather than plugging into a standard wall outlet
  • Excludes switches, rheostats, thermodiscs, and mounting hardware, which must be reused or purchased separately
  • Compatibility requires verifying physical dimensions and 3.25-inch flange spacing before purchase
Detailed Review

The Rotom replacement fireplace blower is a dedicated mechanical fan assembly engineered for select Osburn, Nordica, Valley Comfort, and Pacific fireplaces and wood stoves. It is tailored for existing fireplace owners who need to replace a failing, seized, or noisy blower motor to restore convective airflow in their home. Rather than replacing an entire heating appliance, this targeted component provides the exact physical and electrical configuration needed to circulate trapped firebox heat into your living area.

Airflow performance is driven by a dual-speed skeleton motor capable of delivering 80 CFM on low speed and 135 CFM on high speed, with motor rotation reaching up to 2800 RPM. This two-speed capability allows you to choose between whisper-level background air movement and higher-volume circulation during colder weather. Operating on standard 115-volt power with a conservative 0.92-amp draw, it provides efficient supplemental air distribution without overloading existing fireplace electrical circuits.

The build quality centers on an open-frame skeleton motor mated to a dual-wheel blower housing that discharges air through twin rectangular openings. Measuring 13.0 inches in overall length and 4.25 inches in height, the assembly is compact enough to fit standard lower service compartments. Each of the two air outlets measures 1 inch by 4-7/8 inches, with a fixed 3.25-inch distance between the mounting flanges to match original manufacturer bracket placements.

Installation requires direct electrical connection, as the blower is supplied with raw power leads rather than a standard three-prong wall cord. Homeowners or service technicians will need to connect these leads directly to the existing fireplace wiring, variable-speed control, or thermal snap disc. Checking the physical cavity of your fireplace and confirming that the 13.0 x 4.25-inch housing and 3.25-inch flange spacing match your original part is an essential step before beginning installation.

A practical limitation of this package is that it includes the blower motor assembly only. It does not come with replacement rheostats, thermal sensors, power cords, or mounting fasteners, meaning you must reuse your existing functional hardware or acquire compatible controls separately. Additionally, because stove manufacturers make periodic design revisions across model years, buyers must verify their specific model number and compartment dimensions rather than relying solely on brand compatibility.

For owners of compatible Osburn, Nordica, Valley Comfort, or Pacific wood or gas units, this Rotom blower provides a cost-effective, factory-style replacement solution. Its combination of dual airflow settings, efficient 0.92-amp operation, and 1-year manufacturer warranty makes it a practical purchase for restoring warm-air distribution across your hearth space.

Fit & Dimensions

The Rotom replacement blower features an overall length of 13.0 inches and an overall height of 4.25 inches, engineered to fit into lower blower cavities on compatible stove models.

Air is discharged through two separate openings, each measuring 1 inch by 4-7/8 inches. The distance between the mounting flanges is exactly 3.25 inches. Confirming these precise dimensions against your original factory fan ensures proper physical fit before purchasing.

Blower & Electrical Specs

This unit is powered by a 115-volt skeleton motor drawing 0.92 amps, allowing it to operate efficiently on standard household power lines. It achieves a top operating speed of 2800 RPM.

Airflow output is rated for two speeds, providing 80 CFM on low and 135 CFM on high. The motor terminates in bare power leads only, requiring direct wiring to your existing stove switch, rheostat, or thermal control disc.

Replacement Compatibility

Rotom specifies this blower as a compatible replacement for select fireplace and stove models produced by Osburn, Nordica, Valley Comfort, and Pacific. It is designed to mount using existing factory bracket configurations.

Because this product includes the blower assembly only, buyers should ensure their original switches, thermodiscs, and mounting hardware are in working order or plan to source replacement controls separately.

Frequently Asked Questions

How does a 6-tube fireplace heater circulate heat into a room?

A 6-tube hearth heater captures convective heat by drawing room-temperature air through lower intake ports, heating it inside sealed metal pipes beneath the fire bed, and discharging hot air into the room using an electric blower. The heavy-gauge aluminized steel tubes act as a heat exchanger, preventing excessive fuel waste while directing warmth forward into the living area.

What heat output does the Woodeze Spitfire Fireplace Heater provide?

The Woodeze Spitfire Fireplace Heater delivers a manufacturer-listed heat output of 45,000 BTUs using its six aluminized steel tubes and two-speed blower. This compact design suits smaller fireplaces in dens, cabins, and living rooms that require supplemental zone warmth without consuming excessive firewood.

Can you install a custom firescreen spitfire 6 tube fireplace heater with blower in an open masonry hearth?

Yes, a custom firescreen spitfire 6 tube fireplace heater with blower can be installed into a compatible open masonry hearth, provided your firebox depth accommodates the heater tubes and front blower assembly in 2026. While sealed setups like an integrated direct-vent fireplace utilize fixed glass panels, open hearth heaters require screens with custom cutouts or clearance standoffs to maintain essential spark protection without obstructing blower airflow.

What specifications should you verify when replacing a fireplace blower?

You must verify operating voltage, amperage, physical dimensions, mounting flange spacing, and airflow ratings before purchasing a replacement blower. For instance, the Rotom replacement motor operates at 115 volts and 0.92 amps, delivering 80 to 135 CFM at 2800 RPM across a 13-inch overall length with dual 1-inch by 4 7/8-inch discharge openings.

Does a fireplace blower increase the actual BTU output of a fire?

No, a fireplace blower does not increase the total thermal BTU output generated by burning logs, but it significantly accelerates the distribution of that heat into your living space. Forced convection moves warm air into the room before it escapes up the chimney flue, which is a principle shared across supplemental heating systems ranging from hearth blowers to an efficient linear fireplace.