Ages 18-24? Explore Prime for Young Adults and see if you are eligible

Proper combustion air intake prevents backdrafting and keeps gas appliances running efficiently throughout cold weather. Natural draft B-vent appliances pull room air for combustion unless an outside air duct supplies fresh makeup air directly to the firebox or mechanical room. Installing an empire fresh air kit for keystone b vent fireplace helps balance indoor pressure, which reduces heat loss from conditioned living spaces. Many homeowners pair their heating setups with dedicated intake and exhaust ventilation to maintain steady flue airflow. Careful inspection of appliance collar dimensions, combustible clearances, and exterior termination caps ensures smooth operation without hazardous exhaust spillage.

Gas hearth appliances demand strict compatibility between the firebox chassis, venting configuration, and ignition hardware. Whether you maintain a natural gas B-vent system or upgrade burner assemblies, matching manufacturer-specified components protects your home and heating investment. You can complement your setup using durable stainless steel fireplace components designed for long-term weather resistance. Reviewing the certified model specifications, intake duct diameters, and burner pilot configurations before ordering prevents costly installation delays. The following selections highlight compatible Empire gas appliances, direct vent venting solutions, and replacement pilot assemblies for reliable supplemental heating.

1
Best Seller

Empire Comfort Systems DVVK4TSP Direct Vent

Empire Comfort Systems
9.9 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The Empire DVVK4TSP is a dedicated steel direct-vent fireplace vent kit engineered for top-vent, through-wall exhaust on compatible Empire gas heating appliances. It serves homeowners, remodelers, and installers who need a manufacturer-tailored venting route for safe exterior wall termination.
Pros & Cons

Pros

  • Direct compatibility with designated Empire top-vent appliances
  • Sturdy steel construction built for long-term venting duty
  • Simplifies through-wall horizontal vent routing for remodelers and builders
  • Lightweight 12-pound kit format facilitates easier staging and placement

Cons

  • Specific to compatible Empire models and not intended as a universal venting solution
  • Designed strictly for top-vent through-wall paths, excluding vertical roof venting runs
  • Requires verifying wall thickness, clearances, and local gas venting codes prior to purchase
Detailed Review

The Empire DVVK4TSP Direct Vent Fireplace Vent Kit is a specialized venting component package designed specifically for through-the-wall horizontal termination on compatible Empire gas heating appliances. Homeowners and remodelers adding or replacing a direct-vent Empire gas fireplace often encounter strict venting requirements that demand matched components. This kit provides the dedicated hardware needed to route flue gases safely outside while drawing fresh combustion air from outdoors through a sealed top-vent setup.

Venting performance in direct-vent gas systems depends entirely on reliable air intake and balanced exhaust draft. The DVVK4TSP supports proper appliance operation by establishing a stable, sealed passage through an exterior wall. Because direct-vent systems isolate indoor living areas from combustion byproducts, using a manufacturer-tailored venting solution like this kit helps maintain appliance efficiency and proper indoor air safety.

Constructed from durable steel, the kit is designed to withstand high exhaust temperatures and exterior exposure. The steel material provides rigid structural integrity, reducing the risk of sagging or warping along the horizontal wall penetration. With a total weight of 12 pounds, the assembly remains substantial enough for durable service while staying easy to stage and handle during installation.

Planning your installation requires careful review of dimensions and wall construction. The kit components arrive in a 15 x 17 x 21-inch package, designed to align with the top-exit exhaust collar of compatible Empire units. Because through-wall runs require exact wall thimble positioning, minimum clearances to combustible materials, and specific exterior termination clearances, matching this kit to your building envelope is essential before cutting into framing or exterior siding.

The primary limitation of the Empire DVVK4TSP is its specialized application. It is not a universal venting kit for other fireplace brands, nor is it configured for vertical roof terminations. Homeowners must check their specific Empire fireplace manual to verify model compatibility, permissible horizontal vent lengths, and wall-thickness limitations before ordering.

For homeowners and contractors installing a compatible top-vent Empire gas fireplace with a direct exterior wall path, the DVVK4TSP provides a secure, purpose-built venting pathway. Verifying your appliance model number and framing thickness ensures a clean, code-compliant install that delivers reliable venting performance.

Installation & Compatibility

Compatibility for the Empire DVVK4TSP depends on your exact appliance model and wall layout. This kit is engineered exclusively for Empire Comfort Systems appliances that support a top-exit horizontal venting configuration. Always consult the venting section of your fireplace installation manual to verify that the DVVK4TSP is listed as an approved venting accessory for your specific model number.

Direct-vent gas systems require strict adherence to local mechanical codes, framing clearances, and manufacturer-specified horizontal run limits. Installing this kit requires proper framing of the wall pass-through, sealing against exterior weather penetration, and maintaining clearances away from windows, doors, and walkways. Professional installation by a licensed gas fitter or qualified fireplace technician is strongly recommended to ensure safe combustion airflow and proper exterior termination.

2
Editor's Pick

Empire DVD36FP30N Deluxe 36-Inch Direct-Vent

Empire
9.9 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The Empire DVD36FP30N is a 36-inch direct-vent natural gas fireplace featuring a dependable millivolt control system that operates even during power outages. It is best suited for homeowners and remodelers looking for a classic built-in natural gas hearth for living rooms or renovation projects.
Pros & Cons

Pros

  • Millivolt ignition system functions during household electrical power outages
  • Direct-vent design vents exhaust outside for clean and sealed combustion
  • Relatively shallow 16-3/8-inch depth fits well into standard framing cavities
  • Clean black finish integrates smoothly into various home decor styles

Cons

  • Requires a separate purchase of safety barrier screen DVFB36SBL or a compatible door set
  • Factory configured strictly for natural gas; propane conversion compatibility is not specified in the product data
  • Requires professional gas plumbing, framing, and direct-vent pipe installation
Detailed Review

The Empire DVD36FP30N Deluxe is a 36-inch direct-vent natural gas fireplace engineered for built-in residential installations. It best suits homeowners, remodelers, and builders looking to install a dedicated natural gas hearth into a living room, family room, or finished basement. Built as a permanent focal point, this direct-vent unit requires specialized venting through an exterior wall or roof, making it ideal for planned construction or major renovation projects rather than drop-in retrofit situations.

Operation relies on a traditional millivolt control system paired with a standard on-off switch. The primary advantage of a millivolt gas valve is electrical independence; it generates its own tiny electrical current from a standing pilot, allowing the fireplace to provide warmth and visual flames even during winter power outages. Because the manufacturer does not list exact BTU output or room heating capacity in the raw product specifications, buyers should verify the specific heat rating against their room size before finalizing heating plans.

In terms of construction, this fireplace features a 102-pound steel chassis coated in a clean black finish that blends easily with custom mantels, tile work, or stone surrounds. The unit dimensions are listed at 37 inches in width, 35-5/8 inches in height, and 16-3/8 inches in depth. While some retail specifications list a secondary package dimension of 2 by 5 by 20 inches, the actual firebox chassis matches the standard 37 by 35-5/8 by 16-3/8 inch profile typical of Empire 36-inch direct-vent models.

Proper planning is essential for installation, as this appliance is specifically configured for natural gas and requires direct-vent pipe routing to pull fresh outdoor combustion air while expelling exhaust. A critical manufacturer requirement is the addition of the DVFB36SBL barrier safety screen or an approved door set, which must be sourced to complete the installation. Prospective buyers should always have a qualified gas technician handle the gas piping, wall framing, and venting connections to align with local building codes.

Potential limitations center on the accessories and specialized setup. The barrier screen or doors are not included in the basic package, meaning buyers must factor those components into their overall project budget. Furthermore, there is no documentation provided regarding propane conversion compatibility, so homeowners relying on LP tanks should verify field conversion options before purchasing.

For homeowners seeking a dependable, non-electric-dependent natural gas fireplace for a new framing project, the Empire DVD36FP30N represents a proven direct-vent platform. As long as you account for the separate safety screen, confirm your natural gas supply, and hire a professional for proper venting and installation, this unit offers a clean and classic centerpiece for the home.

Fuel & Venting

The Empire DVD36FP30N is built exclusively for natural gas fuel systems. It should never be connected to a liquid propane tank unless a certified conversion kit and procedure are explicitly provided by the manufacturer. Homeowners must verify incoming gas line pressure and pipe diameter with a certified professional installer.

As a direct-vent appliance, this unit utilizes a sealed combustion system that draws outside air for the flame and exhausts combustion byproducts directly outdoors through dedicated venting pipe. This configuration keeps indoor room air completely sealed from the combustion chamber, making it a reliable option when properly vented through an exterior wall or vertical roof chase.

Fit & Requirements

The fireplace measures 37 inches in width, 35-5/8 inches in height, and 16-3/8 inches in depth, with a total weight of approximately 102 pounds. Note that framing dimensions will require additional clearance beyond the appliance dimensions to account for non-combustible materials and standoff brackets.

The manufacturer specifies that this model requires the installation of barrier screen DVFB36SBL or an approved decorative door set. This screen or door is required to complete the installation and maintain safety standards regarding contact with the hot glass surface during operation.

3
Limited Time

Empire Comfort Systems Loft Millivolt Vent-Free

Empire Comfort Systems
9.9 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The Empire Comfort Systems Loft 20k BTU Vent-Free Fireplace is a natural gas contemporary unit featuring dependable millivolt controls and an integrated safety barrier. It is ideal for homeowners and remodelers seeking efficient supplemental warmth without the expense of chimney venting, where local codes permit.
Pros & Cons

Pros

  • Millivolt control system provides reliable heat even during electrical grid failures
  • Vent-free design eliminates costly chimney construction and exterior venting pipe runs
  • Includes a factory safety barrier screen to guard the front opening
  • 20,000 BTU output supplies solid supplemental zone warmth for open living areas

Cons

  • Vent-free appliances face strict local and regional building code restrictions that require pre-purchase verification
  • Configured strictly for natural gas and requires professional gas line installation and pressure verification
  • Framing cutouts, clearances to combustibles, and mantel heights must be verified using the manufacturer manual
Detailed Review

The Empire Comfort Systems Loft Millivolt Vent-Free Fireplace (ASIN B07PCGNM97) is a built-in natural gas heating appliance engineered to deliver 20,000 BTU of supplemental heat. Configured for natural gas (NG) and equipped with an integrated safety barrier, this modern fireplace suits homeowners, remodelers, and living room renovators who want clean flame ambiance and efficient heat without the expense or structural demands of traditional chimneys or exterior vent runs.

Delivering a listed 20,000 BTU heating capacity, this fireplace leverages a vent-free combustion setup designed to retain heat within the room rather than losing it up a flue. Because vent-free systems discharge combustion byproducts into the living area, proper room sizing, air exchange, and strict compliance with local codes are necessary. In areas where vent-free gas appliances are approved, this output provides substantial supplemental warmth for central gathering spaces.

Operating on a millivolt control valve, the unit maintains a standing pilot that generates its own electrical current via a thermopile. This setup offers an important practical benefit: the fireplace can ignite and provide heat even during electrical grid outages when central furnaces fail. The included safety barrier helps protect against direct contact with interior components while maintaining a clean, open view of the Loft series contemporary burner system.

Proper installation requires a dedicated natural gas supply line and verified framing clearances. Because exact rough opening dimensions, non-combustible material zones, and mantel clearance requirements must match Empire Comfort Systems technical specifications, buyers should plan on professional installation by a qualified gas technician. Natural gas appliances require appropriate gas pressure verification and strict adherence to venting codes.

A primary consideration with any vent-free gas appliance is regional legality and installation restrictions. Certain states, municipalities, and local building jurisdictions prohibit vent-free gas heaters entirely, while others impose strict room-volume limits or restrict installation in bedrooms and bathrooms. Additionally, fuel type must match precisely; this model is built for natural gas and cannot be run on liquid propane without verified manufacturer-approved components.

For homeowners in jurisdictions that permit vent-free gas appliances and who have an available natural gas hookup, the Empire Comfort Systems Loft 20k BTU unit offers a compelling combination of off-grid heating reliability and sleek modern styling. It eliminates the cost of ducting or venting while supplying powerful supplemental heat, provided you confirm your local regulations and framing requirements prior to purchase.

Fuel & Venting

This unit is specifically engineered for dedicated Natural Gas (NG) supply lines. It should never be connected to liquid propane or alternate fuel supplies without explicit manufacturer verification and approved conversion equipment.

As a vent-free appliance, it does not require a chimney, B-vent, or direct-vent pipe system. However, vent-free operation is restricted or regulated by municipal codes in several U.S. states and cities. Homeowners must verify local gas appliance codes, ventilation requirements, and minimum room square footage before ordering.

Ignition & Controls

The fireplace uses a millivolt ignition and control valve system. A millivolt system relies on a standing pilot flame heating a thermopile to generate a small millivoltage current, allowing the main burner to cycle on and off without household 120-volt AC power.

This design makes the fireplace a dependable heat source during severe winter weather power outages. Control accessories such as compatible wall switches or remotes should be verified against Empire Comfort Systems millivolt wiring diagrams.

Safety Features

The fireplace package includes a protective barrier screen designed to help guard the front opening from accidental contact during operation. Safety barrier screens are standard industry requirements designed to reduce contact burn risks.

Because this model discharges into the room environment, it requires adequate combustion air and must be installed according to National Fuel Gas Code (ANSI Z223.1/NFPA 54) and local guidelines. Installation by a licensed gas fitter or qualified hearth professional is strongly recommended.

4
Top Rated

ALLPARTS BASIC ND1703X400X4 Natural Gas Pilot ODS

ALLPARTS BASIC
9.5 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The ALLPARTS BASIC ND1703X400X4 is an original-specification natural gas pilot ODS assembly with an integrated 15-inch thermocouple designed for compatible Empire and ProCom vent-free fireplaces and gas logs. It provides a direct, cost-effective replacement for homeowners needing to resolve pilot outage issues and restore safe, dependable ignition on natural gas hearth appliances.
Pros & Cons

Pros

  • Direct replacement matching Empire ND1703X400X4 and ProCom natural gas pilot ODS specifications
  • Pre-attached 400 mm (15-inch) thermocouple simplifies installation and valve hookup
  • Significantly more economical than replacing a complete gas log burner pan or fireplace assembly
  • Compact footprint fits standard factory mounting brackets on compatible vent-free appliances

Cons

  • Configured strictly for natural gas lines and completely incompatible with liquid propane (LP) fuel
  • Does not include an extensive compatibility list, requiring buyers to visually cross-reference existing parts and part numbers
  • Requires careful gas line disconnection, mechanical installation, and professional gas-leak testing
Detailed Review

The ALLPARTS BASIC ND1703X400X4 Natural Gas Pilot Assembly is a dedicated replacement component tailored for homeowners, property managers, and repair technicians servicing vent-free hearth equipment. Designed as an original-specification match for compatible Empire and ProCom vent-free gas fireplaces and gas log burners, this unit replaces failing or corroded pilot assemblies. If an existing vent-free natural gas fireplace struggles to stay lit, drops the pilot flame, or experiences nuisance outages, this targeted assembly offers a practical repair path instead of replacing the entire log set or burner pan.

In terms of function, this component acts as both the ignition pilot and a critical safety monitor for vent-free natural gas appliances. It integrates an Oxygen Depletion Sensor (ODS) pilot configuration alongside a 400 mm (approximately 15-inch) thermocouple. The thermocouple generates the necessary millivoltage to keep the main safety valve open when a steady flame is present. The fuel configuration is designated strictly for natural gas, meaning it requires appropriate line pressure and orifice sizing specific to natural gas utility lines rather than bottled propane.

Constructed with standard metallic burner hardware in a gold finish, the assembly is sized to match tight burner clearances within decorative hearth enclosures. The listed dimensions measure 2.5 inches by 0.5 inches by 2.5 inches, maintaining a compact footprint that aligns with factory mounting brackets on supported models. The integrated 15-inch thermocouple lead provides sufficient length to route cleanly around burner pans and connect securely to the millivolt control valve or safety block.

Setup requires careful mechanical and gas-line handling, making verification of all safety precautions essential before work begins. Any replacement of a gas pilot assembly involves shutting off the primary gas supply, disconnecting the existing pilot tubing and thermocouple connection, and checking all joints for leaks after installation using an approved gas-leak detection fluid. Because vent-free gas appliances rely on precise airflow and ODS calibration, keeping the pilot orifice clear of household dust, pet hair, and lint during annual hearth maintenance is essential for trouble-free seasonal lighting.

A realistic consideration for prospective buyers is the strict requirement for model and fuel compatibility. This pilot assembly is strictly built for natural gas appliances and cannot be used in liquid propane (LP) systems without creating severe safety hazards. Additionally, manufacturer documentation does not list every single compatible fireplace model number by name, so buyers must physically compare the ND1703X400X4 part number, bracket shape, and 400 mm thermocouple lead against their existing broken part before ordering.

For gas fireplace owners experiencing weak pilot flames, faulty thermocouple signals, or ignition dropouts on Empire or ProCom natural gas equipment, the ALLPARTS BASIC ND1703X400X4 assembly provides a focused, economical fix. Provided your system uses natural gas and matches the original ND1703X400X4 or ProCom ODS specifications, this assembly restores reliable ignition while maintaining required vent-free safety mechanics. If you are uncertain about working with gas fittings, having a licensed gas technician handle the installation is strongly recommended.

Replacement Compatibility

This replacement pilot assembly is specified for natural gas vent-free fireplaces and gas log sets using the Empire ND1703X400X4 part reference or ProCom natural gas pilot ODS assemblies.

It includes a 400 mm (15-inch) thermocouple, which must match the lead length and valve connection type of your current fireplace control valve.

Before purchasing, confirm that your hearth appliance is configured for natural gas rather than liquid propane, and cross-reference your appliance manual or existing pilot bracket to ensure dimensional alignment.

Safety & Verification

Vent-free gas hearth equipment requires precise air-to-fuel ratios and operational Oxygen Depletion Sensors to function properly. Never modify, bypass, or alter the pilot orifice or thermocouple positioning on an ODS assembly.

Do not attempt to use this natural gas pilot assembly on propane (LP) installations, as orifice sizes and gas pressures differ significantly between fuel sources.

Always shut off the main gas supply before servicing any fireplace component. When servicing gas lines, test all fittings with a non-corrosive gas leak detection solution prior to relighting the pilot, and consult a certified gas technician whenever local codes require it or if you are unfamiliar with gas line connections.

5

ALLPARTS BASIC ND1703X800X9 Natural Gas Pilot

ALLPARTS BASIC
9.5 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The ALLPARTS BASIC ND1703X800X9 Natural Gas Pilot Assembly is a direct-fit ODS replacement featuring an extended 32-inch thermocouple for compatible Empire and ProCom vent-free fireplaces and gas logs. It provides an ideal repair solution for homeowners and technicians troubleshooting pilot outages or weak flame sensors on natural gas appliances.
Pros & Cons

Pros

  • Includes an extra-long 800 mm (32-inch) thermocouple for flexible chassis routing
  • Manufactured to original equipment specifications for compatible Empire and ProCom natural gas units
  • Integrated ODS pilot design aligns with vent-free hearth appliance safety standards
  • Compact dimensions provide a direct physical fit in factory mounting locations

Cons

  • Designed exclusively for natural gas and cannot be used on propane (LP) appliances
  • Requires careful model cross-referencing to ensure bracket and valve thread compatibility
  • Gas component installation typically requires professional verification to ensure leak-free operation
Detailed Review

The ALLPARTS BASIC ND1703X800X9 Natural Gas Pilot Assembly is a specialized replacement component engineered for vent-free natural gas fireplaces, stoves, and gas log sets. Designed to match original equipment specifications, this pilot assembly is tailored for homeowners, property managers, and heating service technicians seeking to restore reliable ignition and flame monitoring on compatible Empire and ProCom systems. When an existing pilot fails to stay lit or the safety valve shuts down intermittently, replacing the pilot and thermocouple assembly is often the most effective maintenance step.

Functionally, this assembly combines an Oxygen Depletion Sensor (ODS) pilot structure with a 800 mm (32-inch) thermocouple. The ODS design is critical for vent-free appliances, maintaining a stable flame pattern while continuously monitoring the combustion environment. Concurrently, the integrated thermocouple generates the required millivolt signal to keep the appliance gas control valve open during operation. If an older thermocouple has degraded or oxidized, this replacement restores dependable electrical continuity to keep the flame burning safely.

In terms of construction, the unit features a durable gold-tone metallic finish built to endure the high operating temperatures inside a gas firebox. With physical dimensions measuring approximately 2.5 x 2.5 x 1.5 inches, the bracket matches common factory configurations, allowing for straightforward positioning on the burner chassis. The 32-inch thermocouple lead provides ample length, which helps prevent sharp bends or tension when routing wires through the fireplace bottom to the main valve.

Installation involves connecting the gas pilot supply line and threading the thermocouple lead directly into the safety magnet on the control valve. Because this component directly handles fuel gas, all fittings must be checked for proper seating, and a thorough gas-leak check using approved detection fluid should be conducted before firing the appliance. While the physical footprint matches original Empire ND1703X800X9 assemblies, buyers should verify bracket orientation and fitting sizes against their existing setup.

A critical limitation is that this assembly is exclusively calibrated for Natural Gas (NG) installations. It must never be used with liquid propane (LP) systems, as the orifice sizing, delivery pressure, and ODS air mixture differ substantially between fuel types. Additionally, this part is not a universal assembly for every vent-free fireplace on the market, so matching part numbers prior to ordering is essential.

For owners of compatible Empire or ProCom natural gas vent-free fireplaces dealing with pilot dropouts or ignition trouble, the ALLPARTS BASIC ND1703X800X9 offers a practical, high-value repair solution. It supplies both the ODS pilot frame and a long thermocouple in a single package, making seasonal fireplace servicing straightforward and cost-effective.

Replacement Compatibility

This pilot assembly directly replaces part number ND1703X800X9 and is engineered to original factory specifications for compatible Empire vent-free gas fireplaces, freestanding stoves, and gas log sets. It is also listed as a suitable replacement for select ProCom natural gas appliances.

Because manufacturers periodically update bracket orientations, orifice fittings, and valve connections across model revisions, always consult your appliance manual and parts breakdown to confirm that part ND1703X800X9 matches your exact equipment before ordering.

Fuel & Venting

This assembly is rated exclusively for Natural Gas (NG) systems. It cannot be converted, modified, or used with liquid propane (LP) appliances due to specific pilot orifice calibrations and fuel pressure dynamics.

Intended specifically for vent-free (unvented) fireplace appliances, this assembly features an integrated Oxygen Depletion Sensor (ODS) pilot. Ensure all replacement work complies with applicable local codes and manufacturer safety instructions governing vent-free gas hearth equipment.

6

Empire Comfort Systems 34-Inch Deluxe Flush Face

Empire Comfort Systems
9.4 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The Empire Comfort Systems Deluxe 34-inch B-Vent Fireplace offers a clean flush-face design powered by natural gas and a dependable millivolt control valve. It is an ideal built-in solution for homeowners and remodelers looking to replace an existing B-vent unit or add a traditional vented gas hearth to their living space.
Pros & Cons

Pros

  • Flush-face framing allows non-combustible finishing materials to finish tight against the opening for a custom look
  • Millivolt ignition system does not rely on household 120-volt electricity, ensuring heat availability during power cuts
  • Natural gas supply provides consistent operation without the labor of hauling logs or cleaning firebox ash
  • Dedicated B-vent engineering exhausts combustion byproducts safely through a standard vertical venting system

Cons

  • Requires a dedicated vertical B-vent flue system through the ceiling and roof; cannot vent horizontally through an exterior wall
  • Product specifications do not state whether decorative gas logs, trims, or blowers are included or sold separately
  • Requires professional natural gas plumbing, framing clearance adherence, and code-compliant venting installation
Detailed Review

The Empire Comfort Systems Deluxe 34-inch Flush Face B-Vent Fireplace is a recessed natural gas hearth appliance built for permanent indoor installation. Featuring a clean flush-face perimeter and a millivolt (MV) control system, this fireplace is tailored for homeowners, builders, and remodelers seeking a reliable gas-fueled centerpiece. It is particularly well suited for projects replacing older vertical-vent gas appliances or for homes where a vertical venting pathway already exists.

In terms of operation, this unit relies on a natural gas fuel supply and an established millivolt control platform. Millivolt systems generate their own tiny electrical charge from the heat of a standing pilot light, which powers the gas valve. Because it does not rely on a standard 120-volt household outlet, the fireplace can still ignite and deliver warmth during severe winter weather and power grid outages. As a B-vent (natural vent) unit, it draws combustion air from inside the home and vents combustion gases naturally upward through a vertical pipe system.

The build quality reflects the straightforward, durable steel construction typical of Empire Comfort Systems hearth products. The 34-inch nominal sizing provides an inviting focal point without overwhelming medium-sized living rooms, dens, or finished basements. Its flush-face design is engineered to sit cleanly against surrounding materials, allowing homeowners to install non-combustible facing such as tile, granite, or brick directly adjacent to the firebox opening for a smooth, built-in presentation.

Proper installation requires careful advance planning and professional execution. Because this is a natural gas appliance, connections should be handled by a licensed gas fitter to guarantee safe line sizing, secure fittings, and correct manifold pressure. Additionally, prospective buyers must reference the official Empire Comfort Systems product manual to obtain precise framing dimensions, rough opening requirements, minimum hearth extensions, and mandatory clearances to combustible framing and mantel shelves.

A critical consideration is the venting format. B-vent appliances require vertical venting through the roof or a chimney chase; they cannot be vented directly through a side wall like direct-vent fireplaces. Furthermore, buyers should confirm what components arrive in the carton. Gas logs, interior refractory brick liners, blowers, decorative louvers, and wall switches are often configured as model-specific accessories that must be verified before final purchase.

Overall, the Empire Comfort Systems Deluxe 34-inch Flush Face B-Vent Fireplace is a dependable, practical option for anyone updating an existing vertical gas flue setup. Backed by a trusted brand name and the power-independent reliability of a millivolt system, it provides everyday warmth and clean aesthetics when paired with a professional, code-compliant installation.

Fuel & Venting

This appliance is engineered specifically for natural gas operation. It should only be connected to a residential natural gas line that matches the manufacturer input specifications. Do not attempt to operate this unit with liquid propane unless an official, manufacturer-approved conversion kit is explicitly documented and installed by a certified technician.

The B-vent design classification means this fireplace uses natural draft to move exhaust gases through a listed vertical B-vent metal pipe. This type of venting must route upward through the ceiling and roof, following all manufacturer-specified vertical rise requirements and clearance-to-combustibles guidelines. B-vent units rely on indoor room air for combustion, so adequate room volume and fresh air exchange must be confirmed prior to installation.

Installation & Fit

The nominal 34-inch designation represents the general width class of the unit, but physical framing dimensions will differ from the face dimensions. Before cutting into drywall or framing a new wall cavity, always consult the Empire Comfort Systems technical manual for exact rough opening width, depth, and height specifications.

Because the unit features a flush face, it permits a streamlined aesthetic where surrounding non-combustible wall coverings can sit flush with the appliance perimeter. Clearances to combustible mantels, side walls, and ceiling surfaces must be strictly followed according to manufacturer specifications to maintain safe residential operation.

Frequently Asked Questions

Why does an Empire Keystone B-vent fireplace need a fresh air kit?

A fresh air kit supplies outdoor combustion air directly to the appliance to prevent negative room pressure and exhaust backdrafting. Modern energy-efficient homes often lack sufficient air infiltration for natural-draft gas appliances. Drawing outside air directly to an Empire Fresh Air Kit For Keystone B Vent Fireplace reduces indoor draft competition caused by kitchen range hoods or bath exhaust fans. This direct air intake stabilizes the vertical B-vent flue draft and minimizes conditioned room air consumption during operation.

Can you use a direct vent pipe kit on an Empire B-vent fireplace?

No, B-vent fireplaces require listed Type B double-wall metal pipe and cannot use coaxial direct vent piping. Direct vent systems utilize co-axial or co-linear sealed pipes that bring combustion air in while expelling exhaust through an outer chamber. In contrast, an Empire B-vent fireplace expels flue gas through standard vertical venting while taking combustion air from the surrounding space or a separate fresh air kit duct. Always verify local building codes and manufacturer venting classifications before purchasing ducting.

How do you choose the correct replacement pilot assembly for an Empire gas fireplace?

You must match the exact fuel configuration, valve millivolt rating, and thermocouple lead length specified in your fireplace manual. For example, Empire millivolt units often utilize oxygen depletion sensors (ODS) or standard standing pilots with specific 15-inch (400 mm) or 32-inch (800 mm) thermocouple leads. Using an incorrect thermocouple length or mismatched fuel orifice will prevent the gas valve from holding open safely. Check your unit rating plate before installing replacement ignition hardware or arranging a compatible gas log set inside the firebox.

What is the difference between an Empire B-vent fireplace and a vent-free fireplace?

B-vent fireplaces route all combustion exhaust outdoors through a dedicated vertical pipe, while vent-free fireplaces discharge combustion byproducts directly into the living area. Vent-free appliances require precision oxygen depletion sensors (ODS) and strict room volume limits to operate legally within applicable local codes. B-vent units, such as the Empire Keystone series, rely on gravity buoyancy and outdoor air intake kits to draw flue gas safely through the roof. If you require supplemental zone heat without chimney flues, verify whether local municipal building codes permit vent-free installations in your area.

Does an exterior fresh air intake kit improve heating efficiency in 2026?

Yes, an exterior fresh air kit noticeably improves home heating efficiency by preventing the fireplace from pulling already-heated indoor air into the combustion chamber. Natural draft fireplaces without outside air kits draw warm household air toward the burner and send it up the chimney flue. Channeling cold outside air directly to the chassis preserves ambient room warmth and reduces cold floor drafts. You can also organize your hearth area with a sturdy firewood storage rack to keep complementary heating accessories tidy.

Where should the fresh air intake termination hood be installed on an exterior wall?

Install the intake termination hood on an exterior wall at least 12 inches above ground level and above expected snow accumulation lines. Keep the intake cap positioned away from the fireplace flue outlet, gas meters, plumbing vents, and automobile exhaust locations to prevent recirculating hazardous fumes. The intake duct should remain as short and straight as possible to avoid restricting incoming combustion airflow. Follow Empire installation manuals closely to maintain required clearances to combustible materials and framing members.