Traditional open hearths often lose most of their generated warmth straight up the chimney flue instead of pushing radiant heat into the living space. Homeowners struggling with drafty living rooms frequently look for heavy-duty steel grates and tubular heat exchangers to capture that escaping energy. Choosing a solid custom firescreen fh series 5 tube fireplace grate heater or industrial-grade steel hearth grate can significantly improve heat delivery and log stability. While some homeowners opt for supplemental electric media fireplaces for push-button convenience, genuine wood-burning setups require resilient steel to handle high-temperature burns.
Standard cast-iron grates often crack or sag under high temperatures, choking off ember airflow and reducing combustion efficiency. Upgrading to thick welded steel bars or specialized tubular units provides vital floor clearance and promotes continuous drafting. Heavy-duty options like the 28-Inch Black Lifetime Fireplace Grate by Custom Firescreen and reflective steel firebacks protect masonry while directing heat forward into your home. Checking steel gauge, leg clearance, and firebox measurements ensures your chosen setup delivers dependable heat season after season.
Pros
- Heavy 1/2-inch thick solid steel construction will not crack or break under thermal shock like traditional cast iron
- One-piece integrated foot design provides immediate stability without purchasing or assembling separate feet
- Helps deflect radiant heat into the living room while protecting rear firebrick from deterioration
- Substantial 47.99-pound weight keeps the plate firmly in place behind your existing fireplace grate
Cons
- Heavy 48-pound build can be awkward and physically demanding to lift and position inside a deep firebox
- Dimensions of roughly 21.5 by 15.9 inches require verifying back-wall width and grate clearance before purchase
- Utilitarian industrial steel appearance lacks the decorative relief patterns found on classic ornamental cast plates
The Grate Wall of Fire Model RF-5 Reflective Fireback is a heavy-duty hearth plate engineered specifically for wood-burning masonry fireplaces. It caters directly to homeowners who want to improve radiant heat output in their living spaces while shielding vulnerable firebox back walls from excessive thermal wear. If your fireplace brickwork or mortar joints are starting to show signs of heat fatigue, or if you feel that too much fire warmth is simply absorbing into the chimney masonry, this fireback provides a solid, mechanical solution.
In a standard open masonry fireplace, a significant portion of radiant heat is absorbed by surrounding brick or drawn directly out through the flue. The RF-5 intercepts that rearward energy. Its dense 1/2-inch steel plate absorbs heat from active flames and projects warmth forward into the room. Simultaneously, the plate serves as a protective deflector, preventing direct flame impingement against the rear firebrick to help reduce long-term spalling and mortar degradation.
Rather than relying on traditional cast iron, which is naturally brittle and prone to cracking under rapid temperature swings, this fireback is manufactured from solid 1/2-inch domestic steel. Weighing approximately 48 pounds, the unit offers impressive thermal mass and rigidity. Its durable steel composition ensures it can withstand consistent, high-heat wood fires without warping, bowing, or shattering over years of winter use.
Installation is straightforward thanks to its integrated one-piece layout. Many aftermarket firebacks require separate slotted support feet that must be purchased independently and can shift out of place over time. The RF-5 incorporates a formed base that rests directly on the hearth floor on its own. With outer dimensions measuring roughly 21.5 inches wide by 15.9 inches tall and a base depth of 2.6 inches, it slides cleanly behind most freestanding grates. Routine maintenance is minimal, requiring only that you let the fireplace cool completely before brushing away loose ash during regular hearth cleanings.
Buyers should consider a few practical factors prior to ordering. At roughly 48 pounds, maneuvering this plate into a cramped firebox requires caution to avoid pinched fingers or scraped masonry. It is also critical to measure the flat portion of your firebox back wall and confirm that your grate leaves at least three inches of rear clearance. Additionally, the plain metallic steel finish is utilitarian, which may not appeal to buyers looking for historic decorative motifs or ornate relief art.
For owners of wood-burning fireplaces seeking functional durability and better radiant warmth, the Grate Wall of Fire Model RF-5 is an outstanding choice. Its thick American steel build eliminates cracking concerns, while the freestanding one-piece configuration makes it exceptionally stable and easy to place. As long as your firebox dimensions match its footprint, it serves as a dependable investment in hearth preservation and comfort.
The Grate Wall of Fire RF-5 measures approximately 21.5 inches wide, 15.9 inches tall, and 2.6 inches deep at the base, with a plate thickness of 1/2 inch. The total weight is approximately 47.99 pounds.
Before purchasing, measure the flat back wall of your masonry firebox to verify it provides at least 22 inches of horizontal clearance and adequate vertical space. You should also verify that your fireplace grate allows sufficient depth between its rear legs and the firebox wall for the 2.6-inch base footprint.
Manufactured in the USA from domestic 1/2-inch solid steel, the RF-5 is built to overcome the common structural failures seen in traditional fireplace backplates. While cast iron is commonly used in hearth accessories, it is prone to cracking or splitting when exposed to rapid thermal expansion and uneven heat.
Solid steel offers superior tensile resilience against thermal shock and accidental impacts from firewood logs. The heavy one-piece design integrates the support base directly into the plate, eliminating loose screws, bolts, or separate feet that can loosen over time.
Direct exposure to open flames causes significant thermal stress on masonry back walls, often resulting in cracked firebrick and degraded mortar joints. The RF-5 acts as a physical shield that absorbs the brunt of direct flame impingement.
By preventing flames from making direct contact with the back of the firebox, the plate helps extend the operational lifespan of existing mortar and brickwork. While it does not replace routine chimney sweeps or sound masonry maintenance, it offers practical daily protection for active wood-burning hearths.
Pros
- Thick 1-inch by 1/2-inch A36 hot-rolled steel bars withstand intense daily indoor burning without warping
- 3.5-inch under-grate clearance allows healthy draft circulation and room for coal and ash beds
- Tapered 36-inch front to 32-inch rear profile matches traditional masonry fireplace contours
- Approved for burning both cordwood and coal in indoor residential hearths
- Backed by a manufacturer factory lifetime guarantee for indoor use
Cons
- Substantial 41.9-pound weight makes it cumbersome to lift when performing deep firebox cleanings
- Not compatible with outdoor fire pits, gas appliances, or enclosed wood stove inserts
- Requires a wide firebox with at least 36 inches of front clearance and 17 inches of depth
The Woodeze 36-Inch Heavy-Duty Steel Fireplace Grate is a dedicated hearth accessory designed specifically for large indoor masonry fireplaces. Built for homeowners and frequent wood burners who are frustrated by standard light-gauge grates sagging or cast iron units cracking under sustained temperatures, this support rack provides a massive, stable foundation for cordwood and coal fires alike.
Airflow design plays a direct role in how well fuel combusts, and this unit addresses draft efficiency with a 3.5-inch leg elevation. By raising the fuel bed off the hearth floor, the grate allows incoming air to circulate underneath the wood or coal, promoting faster ignition, hotter core temperatures, and more complete combustion with less unburned residue left behind.
Durability stems from its structural materials, which utilize 1-inch wide by 1/2-inch thick A36 grade hot-rolled steel bars. Unlike cast iron models that often become brittle and fracture from thermal shock or continuous expansion cycles, this heavy-duty steel framework is engineered to retain its shape under repeated, high-temperature heat loads, backed by a substantial 41.9-pound product weight.
Sizing is critical when selecting a large grate, and the Woodeze unit features a classic tapered footprint measuring 36 inches across the front, 32 inches across the back, and 17 inches deep. Fireplace owners must measure their firebox floor carefully, confirming that the front opening, rear wall taper, and depth comfortably accommodate these dimensions while leaving enough room to maneuver fuel safely.
Buyers should also heed the manufacturer guidelines regarding installation limits. This grate is strictly engineered for indoor open fireplaces burning wood or coal; it is not approved for outdoor fire pits, gas log setups, or wood stove inserts. The 41.9-pound weight also requires deliberate effort when removing the grate to perform seasonal masonry inspections or deep ash removal.
For owners of spacious indoor fireplaces who burn frequently throughout the winter, the Woodeze 36-Inch Grate represents a permanent, reliable upgrade. Its heavy steel bar stock, elevated combustion clearance, and factory lifetime guarantee make it a dependable choice for serious indoor wood and coal burning.
Proper fit is essential for safety and performance. The Woodeze grate measures 36 inches wide at the front face, tapering down to 32 inches wide at the back, with an overall depth of 17 inches and a height of 7 inches. Verify that your hearth firebox provides sufficient width and depth so the grate sits flat without resting against firebrick walls.
The 3.5-inch leg clearance provides space underneath for an ash bed without immediately smothering fresh airflow. This elevated design supports both cordwood logs and coal, making it versatile for traditional solid-fuel masonry setups that require steady draft from below.
The manufacturer includes a factory lifetime guarantee that covers this grate against bending and structural breakdown when used indoors with firewood or coal. This warranty provides dependable long-term protection for regular residential heating.
To keep the warranty valid, adhere strictly to the manufacturer application limits. The guarantee explicitly excludes use in outdoor fire pits, gas fireplace burners, and enclosed wood stove inserts, where heat concentrations and environmental exposure differ from standard indoor open hearths.
Pros
- Heavy 30-pound build made from thick 1-inch by 1/2-inch A36 hot-rolled steel resists sagging under high heat
- 3.25-inch leg clearance elevates fuel to support proper drafting and cleaner burns
- Versatile dual-fuel capability supports both standard firewood and coal
- Protected by a USA manufacturer lifetime factory guarantee
Cons
- Explicitly not recommended by the manufacturer for outdoor fire pits or enclosed wood stoves
- Heavier 30-pound weight requires more effort to lift out when sweeping firebox ashes
- Requires careful measurement of fireplace depth and width to confirm taper clearance
The Custom Firescreen 28-Inch Lifetime Fireplace Grate is an American-made, heavy-duty hearth accessory built for masonry or factory-built indoor fireplaces. Designed specifically for homeowners who burn seasoned firewood or coal, it serves as a rugged alternative to lightweight cast-iron or thin wire basket grates that frequently warp, burn through, or sag after exposure to sustained, high-temperature fires.
Combustion performance relies on adequate oxygen circulation, and this grate incorporates 3.25-inch tall legs to raise solid fuel directly off the hearth floor. By elevating firewood logs or coal above accumulating ash, under-bed airflow is improved. The manufacturer notes this elevated layout supports even burning and efficient drafting, which helps minimize fireplace smoke from spilling into the living area.
Structural durability comes from solid 1-inch wide by 1/2-inch thick A36 grade hot-rolled steel bars. Weighing 30 pounds, this grate delivers substantial thermal mass and physical resistance against heavy hardwood logs. Unlike brittle cast iron that can fracture under thermal shock, hot-rolled steel bars withstand repeated heating and cooling cycles while maintaining their load-bearing profile.
With physical dimensions of 27.2 inches wide, 15 inches deep, and 6 inches tall, homeowners must check their firebox floor dimensions prior to purchase. Fireplaces typically taper inward toward the rear wall, so measuring both front opening width and rear depth is essential for a proper fit. Routine ash cleanup simply involves sweeping around or lifting the 30-pound grate once coals have cooled completely.
A few clear limitations apply to this product based on manufacturer specifications. It is engineered exclusively for open indoor fireplaces and is not recommended for wood stoves or outdoor fire pits. Homeowners should also verify that the 6-inch overall height leaves sufficient clearance beneath the firebox lintel for safe wood stacking.
For homeowners looking to replace a worn-out fireplace grate with a durable, long-term solution, the Custom Firescreen 28-Inch model is a dependable investment. Backed by four decades of American manufacturing experience and a factory lifetime guarantee, it offers the strength, fuel versatility, and draft elevation needed for serious seasonal heating.
This grate measures 27.2 inches wide by 15 inches deep with an overall height of 6 inches. The 3.25-inch leg height provides ample clearance beneath the fuel bed to allow air to feed the fire from below, reducing smoldering.
The unit is approved for burning both seasoned firewood and coal in residential indoor fireplaces. It is explicitly not rated for outdoor fire pits or enclosed wood stoves, where different moisture levels and operating conditions apply.
Constructed using hot-rolled A36 grade structural steel bars measuring 1 inch wide by 1/2 inch thick, this grate is built to handle intense heating demands without bowing.
At 30 pounds of solid steel, the grate resists shifting during log placement and stoking, providing reliable support for heavy fuel loads season after season.
Custom Firescreen manufactures this fireplace grate in the USA, drawing on more than 40 years of hearth equipment manufacturing experience.
The grate includes a factory lifetime guarantee directly from the manufacturer, providing long-term assurance against structural failure under normal indoor fireplace use.
Pros
- Solid 25-pound alloy steel structure outlasts typical thin wire or lightweight cast iron fireplace grates
- Vertical arrangement pushes coals and flames against the rear wall, radiating warmth outward instead of losing it up the flue
- Helps correct sluggish drafts and reduces smoke spillover by creating a hotter, more concentrated fire column
- Compact footprint keeps logs safely stacked vertically without rolling toward the hearth screen
- Manufactured in the USA with clearly documented minimum firebox dimension requirements
Cons
- Requires strict minimum firebox dimensions (21-inch back wall, 13-inch floor depth, 20-inch front height), making it unsuitable for small hearths
- Substantial 25-pound weight requires two hands and careful handling when repositioning or performing deep hearth cleanouts
- Achieving peak radiant heat performance requires pairing with an optional reflective fireback sold separately
The Grate Wall of Fire Model S-5 is a purpose-built, vertical wood-burning fireplace grate engineered for medium-sized residential hearths. Unlike conventional flat basket grates that spread burning firewood across the fireplace floor, this unit organizes logs into a vertical stack against the back wall. It is designed specifically for homeowners with wood-burning masonry or pre-fabricated fireplaces who want to stop losing usable warmth up the chimney while curbing intermittent smoke rollout into the living room.
Performance centers on the unit's one-sided vertical geometry. By elevating firewood and resting it against the rear of the firebox, the grate superheats the back firebrick. This concentrated thermal mass projects significant radiant heat directly outward into the living space rather than sending heat straight up the chimney flue. Stacking the fire against the back wall also naturally establishes a stronger, cleaner updraft, helping to minimize sluggish draft conditions and smoke spillage across the fireplace lintel during routine burning.
Build quality is a major asset for long-term fireplace owners. Fabricated in Litchfield, Connecticut, from heavy-gauge alloy steel, the Model S-5 weighs approximately 25 pounds. This robust metal profile provides the structural density needed to endure high-temperature wood fires without sagging in the middle or burning through like mass-market hollow-tube or light cast iron grates. The classic black finish blends seamlessly into dark fireboxes while resisting surface deterioration under normal seasonal use.
Proper fit is essential before setting up this grate. The unit itself measures approximately 21.5 inches wide, 12 inches high, and 12 inches deep (with nominal design measurements of 21 inches wide, 12 inches tall, and 11 inches deep). To ensure adequate clearance and safe airflow, the manufacturer specifies that your firebox must have a minimum back wall width of 21 inches, a floor depth of at least 13 inches, and a front opening height of at least 20 inches. Cleaning beneath the grate is manageable, as the elevated front legs leave room to maneuver an ash shovel or hearth brush underneath the fuel bed.
While this vertical grate offers clear heating advantages, realistic limitations apply. It is not a universal fix for small, shallow, or corner fireplaces that do not meet the stated 21-inch back wall and 13-inch depth thresholds. Additionally, while the vertical design helps optimize draft dynamics, it cannot overcome structural chimney defects, closed dampers, or severe negative home pressure. For extra firebrick protection and maximum heat deflection, pairing the grate with a matching reflective fireback is strongly recommended.
For owners of medium-sized masonry or factory-built fireplaces who regularly burn seasoned cordwood, the Grate Wall of Fire Model S-5 provides a durable, heat-maximizing alternative to disposable flat grates. Its heavy-duty domestic alloy steel construction and radiant vertical profile deliver reliable performance that justifies the investment for any active wood-burning home.
The Grate Wall of Fire Model S-5 features product dimensions of 21.5 inches in width, 12 inches in height, and 12 inches in depth, with a nominal operational footprint of 21 inches wide, 12 inches tall, and 11 inches deep. Its substantial 25-pound weight provides solid stability on the fireplace floor without shifting during log loading.
Before ordering, fireplace owners must measure their firebox interior carefully. The manufacturer requires a minimum back wall width of 21 inches, a fireplace floor depth of at least 13 inches, and a front opening height of 20 inches or greater. If your fireplace tapers significantly toward the rear, verify that the width at the required 13-inch depth point is at least 21 inches wide to ensure an unobstructed fit.
Using a vertical grate requires a slight adjustment in log loading compared to standard flat fireplace grates. Firewood is loaded vertically against the upright bars so that logs rest securely between the grate framework and the rear firebrick wall. As the lower logs burn away, gravity allows upper logs to drop naturally into the ember bed, maintaining a steady, self-feeding fire column.
This contained vertical arrangement keeps logs from rolling outward toward the hearth opening, enhancing safety when opening spark screens or glass doors. Ash management is practical thanks to the open clearance beneath the grate, allowing hearth shovels and ash vacuums rated for cool ash to clean out embers without requiring the 25-pound grate to be lifted out of the firebox after every fire.
Constructed in Litchfield, Connecticut, the Grate Wall of Fire Model S-5 is built using premium-grade alloy steel tailored specifically for high-heat environments. Standard fireplace grates often fail due to thermal fatigue and sag under the weight of burning logs, but this 25-pound solid steel design maintains structural rigidity across repeated burn cycles.
The heavy-gauge upright bars are joined with robust welds engineered to expand and contract evenly without cracking. The resilient black finish protects the steel while maintaining an unobtrusive appearance that matches both traditional brick masonry fireboxes and pre-fabricated metal fireboxes.
Frequently Asked Questions About Custom Firescreen Fh Series 5 Tube Fireplace Grate Heater
How does a tubular fireplace grate heater compare to a solid steel bar grate?
Tubular fireplace grate heaters circulate room air through hollow steel pipes via convection, whereas solid steel bar grates rely entirely on natural radiant heat and under-log airflow. A custom firescreen fh series 5 tube fireplace grate heater focuses on transferring warm air into the room through open pipes. Solid bar models, such as the 28-Inch Black Lifetime Fireplace Grate, prioritize maximum structural durability without moving parts or hollow channels.
Can you burn both coal and firewood on heavy-duty steel fireplace grates?
Yes, heavy-duty grates made from A36 grade hot rolled steel bars easily accommodate both firewood and coal. Models like the Woodeze 36-Inch Lifetime Heavy-Duty Steel grate withstand extreme coal bed temperatures without bending or cracking. Lesser cast-iron grates often fail under the intense heat of burning coal, making thick steel bars a more reliable choice for multi-fuel use.
Why is leg clearance height important for fireplace drafting and heat output?
A leg height of 3 to 3.5 inches ensures sufficient airflow beneath the firebed to support complete wood combustion and clean drafting. Grates like the Woodeze 36-Inch Lifetime Heavy-Duty Steel elevate logs above accumulating ash so oxygen circulates freely. This steady airflow prevents sluggish, smoky burns while protecting the fireplace floor from intense thermal contact.
Do you need a reflective fireback when using a high-efficiency fireplace grate?
A reflective fireback is not required, but pairing one with your grate significantly boosts radiant heat and shields your rear firebox brick. The Grate Wall of Fire Model RF-5 Reflective Fireback reflects thermal energy into the living room while preventing heat stress on masonry. Using it alongside the Grate Wall of Fire Model S-5 High Efficiency creates a targeted heat zone that increases overall warmth.
Can heavy steel fireplace grates be used in gas units or outdoor fireplaces?
No, heavy-duty steel grates are designed strictly for indoor wood or coal fireplaces and are not compatible with gas units, wood stove inserts, or outdoor fire pits. Unlike dedicated systems such as an outdoor gas fireplace, indoor solid steel grates rely on specific chimney draft dynamics. Always check manufacturer guidelines before placing any grate into an alternate hearth setup.


Write Your Review
No reviews yet. Be the first to share your experience!