Ages 18-24? Explore Prime for Young Adults and see if you are eligible

Proper venting and fuel line alignment dictate how smoothly a direct-vent gas installation performs across cold winter months. Homeowners evaluating a Napoleon 39 Elevation E36 Direct Vent Gas Fireplace setup often face critical choices between millivolt valve packages and intermittent electronic ignition systems. Sourcing the right parts, from a side-mount SIT pilot assembly to an updated direct-vent gas fireplace chassis, requires matching precise manufacturer part numbers. Installing a compatible wired wall thermostat fireplace control or standard handheld remote also depends on whether your burner valve uses standard millivolt wiring. Checking fuel lines and clearance requirements early prevents costly delays before framing begins.

Gas valve operation demands strict attention to fuel classification because liquid propane and natural gas require entirely different pressure levels. Upgrading your hearth setup with realistic glowing embers or an optional circulation blower improves supplemental heat without complicated maintenance. Examining manufacturer specifications for mounting brackets, thermopiles, and ignition leads keeps your heating system dependable throughout winter. Verifying OEM replacement specifications protects against unexpected leaks and ignition issues during power outages.

1
Best Seller

Napoleon WS-100-38 Natural Gas Pilot Assembly

Napoleon
9.9 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The Napoleon WS-100-38 Natural Gas Pilot Assembly is an OEM direct-fit replacement designed for side-mount installation in direct-vent gas fireplaces. It is best suited for homeowners and technicians looking to restore reliable natural gas pilot ignition using factory-spec 24-inch component leads.
Pros & Cons

Pros

  • Direct-fit OEM replacement engineered under Napoleon part number WS-100-38
  • Integrated 24-inch lead components allow easy routing to the gas valve manifold
  • Factory-configured specifically for direct-vent natural gas applications
  • Side-mount bracket matches original equipment mounting locations

Cons

  • Configured strictly for natural gas and cannot be used in propane systems without proper conversion
  • Requires verifying your specific Napoleon direct-vent fireplace model manual before purchase
  • Gas appliance servicing typically requires professional handling for leak checking and safe operation
Detailed Review

The Napoleon WS-100-38 Natural Gas Pilot Assembly is an OEM-specified replacement component designed for direct-vent gas fireplaces. Manufactured by Allparts Equipment to meet factory specifications, this pilot assembly is intended for homeowners, landlords, or maintenance technicians working to repair an existing direct-vent Napoleon fireplace that suffers from pilot lighting issues, loose connections, or worn ignition components.

This pilot assembly functions as the critical ignition and flame-sensing source within a natural gas fireplace system. Because it is specifically built for direct-vent natural gas applications, the orifice and burner hood are calibrated for standard natural gas delivery, avoiding the soot buildup or delayed ignition that can happen with mismatched fuel components. It features a side-mount design that positions the pilot flame properly against the main burner for smooth ignition cycles.

Construction details reflect durable black-finished metal housing and components sized to handle the continuous heat of an active direct-vent firebox. The overall package dimensions measure 8 x 2 x 5 inches, and the assembly is fitted with 24-inch components, providing ample reach for routing thermopile, thermocouple, or spark wiring down through the firebox base to the lower control valve area.

Installation requires access to the fireplace burner tray and gas valve manifold. The integrated side bracket aligns with existing screw locations on compatible direct-vent fireboxes, while the 24-inch lead lengths eliminate tension on the wiring during positioning. Working on fuel lines requires turning off the gas supply and ensuring leak-free connections according to the fireplace manufacturer's maintenance procedures.

A key consideration is fuel compatibility. This unit is strictly engineered for natural gas direct-vent fireplaces and is not compatible with liquid propane setups without explicit factory conversion kits. Additionally, because Napoleon produces diverse fireplace series with distinct mounting brackets and lead lengths, buyers should cross-reference part number WS-100-38 with their appliance's original user manual or parts list prior to purchase.

For homeowners maintaining an older or malfunctioning direct-vent Napoleon natural gas fireplace, the WS-100-38 assembly provides a dependable direct-fit solution. Its OEM specifications and pre-sized 24-inch components eliminate guesswork, making it a solid replacement choice to restore reliable seasonal heating and ambiance.

Replacement Compatibility

Confirming part numbers is essential before ordering gas fireplace hardware. The WS-100-38 assembly is designed specifically as an OEM replacement for compatible Napoleon direct-vent gas fireplaces. Check your fireplace model rating plate or owner manual to verify that WS-100-38 is listed under the replacement parts diagram.

This pilot assembly features a side-mounting bracket and 24-inch components. If your direct-vent fireplace uses a top-mount pilot bracket or requires longer leads to reach the gas valve, verify fitment against the appliance manufacturer specifications before starting installation.

Fuel & Venting

This pilot assembly is configured exclusively for direct-vent fireplaces fueled by natural gas. Natural gas and liquid propane operate at different manifold pressures and require different orifice sizes, meaning this pilot should never be installed on a propane system without certified conversion equipment.

Because direct-vent fireplaces utilize a sealed combustion chamber, proper pilot alignment and tight sealing around wiring penetrations are critical for maintaining draft integrity and safe combustion.

2
Editor's Pick

Lennox Superior H4080 Direct Vent Natural Gas

IHP Superior Lennox Hearth by Allparts Equipment
9.9 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The H4080 Natural Gas Pilot Assembly is an original-equipment replacement component designed for Lennox and Superior direct-vent fireplaces equipped with electronic ignition systems. It suits fireplace owners and technicians looking to restore reliable burner ignition using an exact-fit replacement part.
Pros & Cons

Pros

  • Direct OEM part number H4080 match for Lennox and Superior fireplace models
  • Integrated electronic ignition pilot with igniter simplifies component replacement
  • Configured specifically for natural gas direct-vent hearth appliances
  • Reliable solution for restoring spark and pilot function on compatible units

Cons

  • Engineered strictly for natural gas and incompatible with liquid propane systems without approved conversion
  • Requires exact part-number verification against the fireplace manual or appliance rating plate
  • Installation involves gas lines and electrical connections that generally require professional service
Detailed Review

The H4080 Lennox Superior Direct Vent Natural Gas Pilot Assembly is a specialized replacement component engineered for select direct-vent gas fireplaces. This part serves homeowners, property managers, and hearth service technicians who need to fix an unreliable ignition system on compatible Lennox and Superior gas appliances. Instead of considering an expensive firebox overhaul, installing the designated replacement pilot assembly restores proper ignition function.

Functionally, this pilot assembly is designed specifically for electronic ignition systems operating on natural gas. It houses both the pilot burner structure and the electronic igniter to deliver a dependable spark and establish the pilot flame necessary to ignite the main burner. Direct-vent hearth systems rely on exact flame placement and stable ignition within a sealed glass-front enclosure, making a proper replacement assembly essential for safe, everyday fireplace operation.

In terms of construction, the unit is distributed by Allparts Equipment for IHP Superior Lennox Hearth products under part number H4080. It features durable metal mounting hardware, an integrated electrode igniter, and factory-set orifice geometry designed for natural gas line pressure. Because it arrives as an integrated electronic ignition pilot assembly, technicians do not have to piece together separate ignition pins or mounting clips.

Installation and maintenance require careful alignment with factory procedures and local building codes. Because this assembly interfaces directly with the fireplace gas feed and electronic control module, the gas supply must be shut off and electrical power disconnected before service begins. Homeowners should plan to work with a licensed gas fitter or certified hearth professional to ensure leak-free fittings, secure wiring, and correct pilot flame rectification.

The most important consideration before ordering is verifying appliance compatibility. This component is strictly intended for natural gas systems and must not be installed on liquid propane setups. It is also engineered exclusively for electronic ignition direct-vent units and will not replace standing millivolt pilot assemblies or fit models from unrelated hearth manufacturers.

For owners of compatible Lennox or Superior gas fireplaces struggling with a pilot that fails to spark or stay lit, the H4080 natural gas pilot assembly provides a direct, reliable replacement. Checking the fireplace rating plate or parts manual to confirm part number H4080 ensures a smooth installation and dependable heat during cold weather.

Fuel & Venting

This pilot assembly is configured exclusively for natural gas (NG) applications. Natural gas and liquid propane operate at different line pressures and require distinct orifice sizes, meaning this part must not be connected to a propane supply without verified, manufacturer-approved conversion hardware.

Additionally, the H4080 assembly is built for direct-vent gas appliances, which draw outdoor air for combustion and exhaust flue gases outside through a sealed venting system. It is not suitable for vent-free, natural-vent, or B-vent fireboxes unless explicitly designated by the manufacturer.

Replacement Compatibility

Compatibility depends entirely on matching the manufacturer part number H4080 to your specific Lennox or Superior fireplace model. You can locate this information on the appliance rating plate, usually found behind the lower control louvers or inside the fireplace valve compartment.

Do not attempt to install this assembly on standing pilot (millivolt) fireplaces or units with continuous-match lighting. It is designed solely for electronic ignition controls that utilize an electronic spark igniter to light the pilot flame automatically.

3
Limited Time

WS-100-38 Direct Vent Natural Gas Pilot Assembly

Generic
9.9 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
This WS-100-38 natural gas pilot assembly is an aftermarket SIT side-mount replacement designed for compatible direct-vent gas fireplaces and Napoleon stoves. It includes the pilot tubing, spark electrode, thermocouple, and thermopile, making it a practical complete kit for homeowners and repair technicians troubleshooting pilot outage or ignition failure.
Pros & Cons

Pros

  • Includes every core ignition component: pilot hood, gas line, electrode, thermocouple, and thermopile
  • Matches an extensive list of direct-vent replacement part numbers across Napoleon and SIT systems
  • Cost-effective aftermarket alternative to purchasing individual flame sensors separately
  • Dedicated natural gas orifice setup ensures appropriate pilot flame pattern when installed in compatible appliances

Cons

  • Configured strictly for natural gas and cannot be used with propane systems without verified conversion components
  • As an unbranded replacement part, exact bracket alignment and connector threads must be matched against your existing unit prior to ordering
  • Working with gas lines and combustion components requires careful safety precautions or professional installation
Detailed Review

The WS-100-38 natural gas pilot assembly is an aftermarket replacement part engineered for direct-vent gas fireplaces, gas fireplace inserts, and freestanding gas stoves that utilize a side-mount SIT pilot bracket. This component is specifically aimed at existing gas fireplace owners, property managers, and repair technicians dealing with common pilot issues, such as a pilot flame that will not stay lit, weak millivolt output to the gas control valve, or a failed spark igniter.

In gas fireplace operation, the pilot assembly serves as the foundational safety and ignition hub. This particular unit includes the spark electrode for ignition, a thermocouple to keep the safety magnet open in manual valves, and a thermopile (generator) that produces the electrical current required to operate main burner valves and wall switches. When installed in compatible natural gas appliances, it produces the targeted pilot flame required to envelop both sensor probes while smoothly bridging the flame to the main burner tube.

The build consists of a durable metal side-mount bracket finished in silver, designed to hold the pilot hood, sensors, and ignition lead rigidly in place against combustion draft and thermal cycles. Because direct-vent fireboxes undergo repeated heating and cooling, the pre-crimped sensor leads, threaded thermocouple connection, and flexible aluminum pilot tubing provide standard mechanical connections that correspond to standard SIT gas train layouts.

Installation involves removing the glass door barrier of the direct-vent fireplace, disconnecting the old pilot tube and wiring leads from the gas valve, unbolting the side-mount bracket from the burner base, and securing this unit in the identical orientation. Because it replaces several individual components simultaneously, it eliminates the need to diagnose whether an ignition failure stems from a deteriorating thermocouple, an oxidized thermopile, or a cracked ceramic electrode insulator.

Important limitations center on fuel and mechanical fit. This pilot assembly is explicitly manufactured for natural gas fuel supplies and direct-vent setups; it must not be used on liquid propane systems without verified, appliance-approved conversions. Furthermore, while the manufacturer lists cross-compatibility with several part numbers including 30200, 700-088, 69L17, 904405, H3466, RPA020, WS100-38, 0199702, and 910-034, buyers should physically compare the mounting bracket configuration and pilot hood angle against their original equipment to verify a precise match.

Overall, this replacement pilot assembly offers a practical, budget-friendly repair solution when an existing Napoleon or SIT-equipped natural gas direct-vent fireplace suffers from pilot failure. For homeowners comfortable with gas appliance maintenance, or technicians seeking an all-in-one replacement package, it provides the essential components needed to restore reliable hearth heating without the expense of full burner replacement.

Replacement Compatibility

Compatibility verification is essential before purchasing replacement gas fireplace components. This SIT side-mount pilot assembly is listed to replace OEM part numbers 30200, 700-088 (700088), 69L17 (69L1701, 69L17_0), 904405, H3466, RPA020, WS-100-38 (WS100-38), 0199702, and 910-034.

It is commonly matched to select Napoleon gas burning stoves and direct-vent gas fireplaces utilizing standard side-mounting SIT pilot brackets. Buyers should check their appliance rating plate, owner manual, or existing pilot bracket geometry to confirm that both the mounting footprint and the natural gas designation match before beginning repairs.

Fuel & Venting

This pilot assembly is designated exclusively for natural gas direct-vent appliances. Natural gas and liquid propane operate at different line pressures and require specific orifice dimensions to maintain correct air-fuel combustion, meaning this assembly cannot be installed in propane fireplaces without factory-approved adjustments.

Because direct-vent fireplaces operate with sealed combustion chambers, maintaining an airtight firebox seal and leak-free gas connections after installing this pilot assembly is mandatory for safe operation. A gas leak test should always be performed on all fittings prior to reigniting the appliance.

4
Top Rated

Napoleon F45 Hand Held Fireplace Remote Control

Napoleon
9.8 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The Napoleon F45 is a handheld remote control kit designed specifically for millivolt gas valve fireplaces, providing straightforward wireless on/off operation and an integrated room temperature display. It is an ideal solution for gas fireplace owners looking to replace a lost controller or add convenient armchair operation to a compatible hearth.
Pros & Cons

Pros

  • Dedicated on/off wireless control tailored specifically for millivolt gas valve fireplaces
  • Includes both transmitter and receiver for a complete replacement or initial setup
  • Built-in digital display provides at-a-glance room temperature readings
  • Simple push-button layout makes everyday fireplace operation straightforward

Cons

  • Designed strictly for millivolt gas valves and will not function with IPI or 120V electric units
  • Limited to standard on/off functionality without advanced flame modulation or thermostatic cycling
  • Specific fireplace valve terminals and wiring compatibility must be confirmed prior to purchase
Detailed Review

The Napoleon F45 Hand Held Fireplace Remote is a dedicated wireless control kit engineered specifically for gas hearth appliances equipped with millivolt gas valves. Combining a handheld transmitter with a matching receiver, this package allows homeowners to start and shut down their fireplace flame from the comfort of a chair. It is especially well suited for existing fireplace owners replacing a failed controller, remodelers completing a millivolt gas insert setup, or anyone wanting to avoid bending down to reach lower fireplace access switches.

Regarding practical performance, the F45 focuses on dependable on/off command execution. In addition to switching the burner flame, the handheld unit features a large, easy-to-read digital screen that displays both operating status and current ambient room temperature. This dual readout allows users to monitor living room comfort levels at a glance without having to navigate complicated multi-tier programming menus.

The physical construction of the transmitter features a neutral black finish that blends easily with typical family room electronics and mantel surrounds. With a listed weight of approximately 0.01 pounds, the remote is exceptionally light and manageable for daily use. The listed packaging dimensions measure 9 by 5 by 9 inches, housing both the wireless transmitter and the corresponding receiver module.

Installation requires connecting the receiver unit to the appropriate millivolt terminals on the fireplace gas valve. Because millivolt valve systems rely on low-voltage currents generated by a standing pilot thermopile, proper wiring to the appliance terminals is necessary for safe and reliable signaling. Fireplace owners should review their appliance manual or work with a qualified gas technician during installation to ensure all manufacturer clearances and wiring protocols are met.

While this system delivers reliable wireless operation, buyers should keep specific technical limitations in mind. The F45 provides straightforward on/off control rather than automated thermostatic flame regulation, adjustable flame height, or programmable timer modes. Additionally, it is intended solely for millivolt gas systems and is incompatible with electronic intermittent pilot ignition (IPI) systems or standard line-voltage electric fireplaces.

For homeowners operating a compatible millivolt gas fireplace, the Napoleon F45 offers a reliable, user-friendly remote control upgrade. Its dedicated receiver, lightweight handheld transmitter, and built-in room temperature display deliver everyday comfort and practical convenience. Buyers should verify their fireplace valve type and terminal configuration before ordering to ensure seamless compatibility.

Remote & Controls

The Napoleon F45 system provides direct, handheld control tailored for gas fireplace operation. By pairing a wireless handheld transmitter with a dedicated receiver, the kit allows users to activate or extinguish the flame with simple push-button commands.

The integrated digital screen shows both system activation status and real-time room temperature. This layout gives homeowners immediate feedback on their room environment while keeping fireplace management quick and intuitive.

Replacement Compatibility

Compatibility for the Napoleon F45 is specifically restricted to gas fireplaces, stoves, and inserts utilizing a standard millivolt gas valve. Millivolt systems generate their own low-voltage power via a pilot thermopile to operate the control circuit.

This remote kit does not support electronic intermittent pilot ignition (IPI) systems, 120-volt electric fireplaces, or wood-burning appliances. Owners should confirm their appliance gas valve specifications and wiring terminal labels before purchasing.

5

Empire Comfort Systems 36-Inch Direct-Vent Liquid

Empire Comfort Systems
9.8 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The Empire Comfort Systems 36-inch direct-vent liquid propane fireplace is a built-in gas hearth appliance featuring a reliable millivolt ignition valve and an included heat circulation blower. It is an ideal fit for homeowners and remodelers building out propane-fueled living spaces who want off-grid heat capability during electrical outages.
Pros & Cons

Pros

  • Direct-vent closed system pulls combustion air from outside to preserve indoor ambient air
  • Millivolt control system functions without household electrical power for emergency winter heating
  • Factory-included circulation blower assists in distributing warm air outward into the room
  • Pre-configured from the factory for dedicated liquid propane supply lines

Cons

  • Factory-set for liquid propane (LP); buyers needing natural gas must verify conversion kit availability
  • Requires professional gas plumbing, leak testing, and dedicated direct-vent pipe termination
  • Rough framing openings, mantel clearances, and decorative media components should be verified prior to installation
Detailed Review

The Empire Comfort Systems Premium 36-inch Direct-Vent LP Fireplace with Blower is a built-in gas hearth appliance tailored for living rooms, family rooms, and cabins that utilize liquid propane. Engineered as a permanent heating fixture, this unit is well suited for homeowners, builders, and remodelers who want the convenience of clean-burning gas heat paired with off-grid reliability.

Functionally, the direct-vent setup provides a sealed combustion system that brings in fresh outdoor air for the burner while exhausting combustion byproducts straight to the exterior of the home. This configuration helps protect indoor air quality and eliminates the room drafts often associated with open masonry hearths. Operating on a millivolt gas valve, the fireplace utilizes a standing pilot light to generate small amounts of electricity, which allows the main burner to cycle on and provide supplemental warmth during winter storms and power outages. The factory-included blower actively moves air across the heated firebox walls to distribute warm air throughout the living space.

Regarding build quality, Empire Comfort Systems constructs this 36-inch platform around a heavy-gauge steel firebox with a sealed glass viewing assembly. The millivolt control valve and gas connections are located behind the lower access panel, keeping mechanical components protected while maintaining straightforward access for maintenance. The integrated blower motor is positioned within the chassis to channel airflow around the perimeter of the firebox.

Installation requires careful planning around gas lines, framing dimensions, and venting pathways. Because this unit uses nominal 36-inch sizing, buyers must consult the manufacturer rough framing diagrams before building out wall studs, non-combustible facing materials, or mantel shelves. The direct-vent pipe must follow approved vertical or horizontal clearance paths to an exterior termination cap. Professional installation by a licensed gas fitter or qualified hearth technician is necessary to ensure proper fuel line pressure, venting seal integrity, and safe operation.

A few practical considerations exist with this specific configuration. Because this model is configured at the factory strictly for liquid propane (LP), homeowners with municipal natural gas utilities cannot use it out of the box and must verify if a compatible conversion kit is available. In addition, base product documentation focuses on the core firebox, valve, and blower, meaning buyers should confirm which decorative log sets, firebox liners, or wall switches are included or need to be ordered separately.

Overall, the Empire Comfort Systems 36-inch LP direct-vent fireplace offers a balanced combination of traditional gas reliability and active convection heating. For property owners heating with dedicated propane tanks who value storm-ready millivolt operation, this fireplace serves as an attractive, functional heating center for the home.

Fuel & Venting

This fireplace is engineered specifically for liquid propane (LP) fuel systems, making it suitable for rural, suburban, or vacation properties running on exterior bulk propane tanks. Liquid propane operates under different supply pressures than natural gas, requiring dedicated factory-sized orifices and regulator settings.

The direct-vent exhaust system uses a sealed venting run that draws outdoor air directly into the firebox for combustion while expelling exhaust fumes outdoors. This eliminates heat loss through open dampers and requires strict adherence to manufacturer horizontal and vertical venting length requirements.

Blower & Controls

The millivolt valve system uses a standing pilot light to generate its own micro-voltage across a thermopile. This self-powered control circuit allows the fireplace burner to ignite and operate via a wall switch or millivolt thermostat even when municipal electric power is down.

The integrated circulation blower actively propels convection heat out of the upper louvers and into the living space. Buyers should verify electrical outlet requirements behind the lower fireplace surround to provide power for the blower motor.

6

SIT Controls 0199724 OEM Natural Gas Pilot

Sit Controls by Allparts Equipment
9.7 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The SIT 0199724 is an authentic OEM CSA-certified natural gas pilot assembly designed for direct-vent fireplaces, freestanding stoves, and gas log sets. It is the best choice for homeowners and repair technicians seeking a factory-grade replacement to resolve pilot ignition failures and ensure safe operation.
Pros & Cons

Pros

  • Genuine OEM manufacturing avoids the fitment and flame stability issues common to generic aftermarket copies.
  • CSA safety listing confirms rigorous evaluation against fire, gas leak, and combustion risks.
  • Pre-tested construction helps guarantee a functional pilot flame right out of the box.
  • Backed by experienced USA-based technical assistance through Allparts Equipment.

Cons

  • Configured strictly for natural gas appliances and cannot be used in propane setups without proper conversion.
  • Requires cross-referencing your fireplace model number and owner manual before ordering to ensure correct bracket match.
  • Safe installation typically requires a licensed gas technician or experienced hearth professional.
Detailed Review

The SIT 0199724 OEM Natural Gas Pilot Assembly is a factory-original replacement component designed to restore reliable ignition in direct-vent gas fireplaces, freestanding stoves, heaters, and gas log sets. Distributed by Allparts Equipment, this assembly is engineered specifically for homeowners, property managers, and service technicians facing pilot light outages, weak pilot flames, or main burner startup failures on SIT-equipped hearth appliances. Choosing an authentic SIT Controls part ensures factory-calibrated flame geometry that aftermarket generic components often fail to match.

In direct-vent gas hearth appliances, a dependable pilot assembly is critical for safe burner ignition and continuous operation. This component delivers the exact pilot flame pattern required to properly envelop the safety sensors, signaling the main gas valve to open smoothly. Because it is calibrated strictly for natural gas, it maintains the appropriate gas flow and air mixture to prevent sooting, flame lifting, or nuisance outages during regular heating cycles in family rooms and living areas.

Construction quality aligns with strict OEM manufacturing standards and is backed by official CSA certification. The Canadian Standards Association mark confirms that the assembly has passed demanding safety evaluations covering hazards such as gas leaks, structural degradation, and explosion risks. Rigorous pre-packaging inspection by the manufacturer further minimizes the likelihood of receiving a defective component, giving buyers peace of mind when repairing closed-combustion fireboxes.

Installation requires careful alignment with the appliance manufacturer guidelines and original equipment documentation. Because delicate pilot tubes, gas fittings, and electrical leads are involved, the part demands careful handling to avoid kinking supply lines or damaging thread connections. Due to the inherent safety considerations of working with residential gas lines, homeowners should verify their appliance manual and rely on a qualified gas fitter or hearth technician to complete the installation and perform necessary leak testing.

A primary consideration for buyers is verifying fuel type and specific part cross-references before ordering. This assembly is designed exclusively for natural gas systems and cannot be installed in liquid propane setups. Furthermore, while the SIT 0199724 and related reference number 0.199.702 are widely used across multiple hearth brands, bracket configurations and wire lead lengths can vary by fireplace model, making a direct check of your appliance manual essential before purchasing.

For property owners troubleshooting an unreliable natural gas fireplace or servicing an older direct-vent heating stove, the SIT 0199724 OEM Pilot Assembly offers a dependable, certified solution. With authentic OEM tolerances and USA-based technical support from Allparts Equipment, it delivers the safety, compatibility, and durability needed to bring warmth and comfort back to your hearth.

Replacement Compatibility

Before ordering this pilot assembly, verify the exact part number listed in your fireplace, stove, or heater owner manual. The SIT 0199724 (also referenced under SIT 0.199.702) is widely utilized by numerous direct-vent gas appliance manufacturers, but physical brackets, tube bends, and sensor orientations vary across specific firebox designs.

This pilot assembly is configured strictly for natural gas (NG) applications. It is not compatible with liquid propane (LP) systems, as orifice sizing and gas pressure requirements differ significantly between fuel types. Ensure your appliance fuel supply matches the natural gas designation of this assembly.

Safety & Support

This pilot assembly holds CSA certification, confirming that the component has undergone thorough evaluation to meet North American safety standards against gas leaks, structural failure, and fire hazards. CSA testing ensures that replacement parts perform with the same reliability as original factory equipment.

Distribution is handled by Allparts Equipment & Accessories in Southwest Michigan, providing buyers with access to USA-based technical support. While technical guidance is available for product identification, all gas line connections, burner repairs, and pilot installations should follow local building codes and be completed by a qualified hearth professional.

7

IHP Lennox Superior 69L18 Propane Gas Pilot

Allparts Equipment & Accessories
9.6 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The IHP Lennox Superior 69L18 is an authentic OEM propane gas pilot assembly designed specifically for direct-vent gas fireplaces equipped with SIT control systems. It is the ideal replacement part for homeowners and service technicians needing to restore reliable pilot ignition on compatible IHP, Lennox, or Superior hearth appliances.
Pros & Cons

Pros

  • Authentic OEM component built for SIT controls rather than a generic aftermarket copy
  • Exact fit for specified IHP, Lennox, and Superior direct-vent propane systems
  • Compact factory dimensions ensure proper alignment on the burner pan pilot bracket
  • Restores dependable ignition and flame sensing for reliable fireplace start-ups

Cons

  • Configured strictly for propane gas and cannot be used in natural gas installations without proper modification
  • Installation involves gas lines and sealed direct-vent assemblies, often requiring professional service
  • Compatibility is model-specific and requires checking appliance manuals to verify part number 69L18
Detailed Review

The IHP Lennox Superior 69L18 is an original equipment manufacturer (OEM) propane gas pilot assembly designed specifically for direct-vent fireplaces utilizing SIT control valves. This component is tailored for existing fireplace owners, property managers, and hearth technicians who need a direct factory replacement to resolve pilot outage, weak pilot flame, or ignition failure in compatible gas hearth units.

Engineered for dedicated liquid propane (LP) setups, this assembly delivers the precise gas flow and flame pattern required to heat the safety sensors and reliably ignite the main burner. Because it is manufactured as an authentic OEM assembly for SIT controls rather than an untested universal copy, it maintains factory flame geometry and stable millivolt generation for smooth fireplace operation.

Construction quality matches original factory specifications, featuring durable metallic tubing, a precision-machined propane orifice, and robust ignition lead wiring packaged within a compact 2 x 3 x 3-inch footprint. The standardized mounting bracket ensures proper distance from the main burner port, which helps prevent delayed ignition and reduces soot buildup around the pilot hood.

Installation requires accessing the sealed firebox of a direct-vent appliance and disconnecting both the pilot gas supply line and electrical leads from the SIT valve. Due to the critical safety requirements of gas tightness and proper combustion air sealing on direct-vent systems, verification of gas connections and adherence to local mechanical codes are essential during replacement.

A notable limitation of this assembly is its strict fuel and system dependency. It is designed solely for propane gas and will not function correctly on natural gas systems; additionally, it is meant only for appliances configured with SIT controls matching part number 69L18. Buyers must cross-reference their fireplace rating plate and parts list before ordering to ensure full compatibility.

For homeowners and technicians maintaining a compatible Lennox, Superior, or IHP direct-vent propane fireplace, this genuine 69L18 pilot assembly provides dependable factory-grade performance. It eliminates the guesswork of aftermarket retrofits and restores consistent, safe ignition to your living-room zone heat source.

Replacement Compatibility

This pilot assembly directly replaces OEM part number 69L18 for direct-vent gas fireplaces manufactured under the IHP, Lennox, and Superior brand names. It is engineered specifically for units that utilize SIT control systems.

Because gas fireplace components are not universal, buyers must verify their fireplace model number, fuel type, and existing gas valve brand on the appliance rating plate or user manual prior to purchase.

Fuel & Venting

This component is calibrated exclusively for liquid propane (LP) direct-vent gas fireplaces. It features a propane-specific pilot orifice designed to operate at standard propane manifold pressures.

Propane and natural gas pilot assemblies are not interchangeable. Attempting to use this propane assembly on a natural gas supply without authorized conversion will result in improper combustion and potential safety hazards.

8

Napoleon Ascent B36 Direct Vent Clean Face Natural

AMS FIREPLACE INC.
9.5 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The Napoleon Ascent B36 (SKU: B36NTRE-1) is a direct-vent natural gas fireplace featuring a clean-face design, realistic PHAZER log set, and an electronic ignition with backup power-failure controls. It is an ideal built-in solution for homeowners and remodelers seeking a reliable, permanent gas hearth for living rooms or media spaces.
Pros & Cons

Pros

  • Louver-free clean face profile provides a modern look that integrates smoothly with custom hearth surrounds
  • Battery-backed control system provides dependable heat during winter storms and electrical power cuts
  • Adjustable flame and heat output lets you balance ambiance and supplemental warmth as conditions change
  • Exclusive PHAZER logs and glowing ember bed deliver an authentic wood-fire look without the mess of firewood

Cons

  • Configured specifically for natural gas; using liquid propane requires verifying a compatible conversion kit
  • Requires professional direct-vent pipe routing, custom framing, and licensed gas line installation
  • Product listing does not detail exact framing dimensions or BTU ratings, requiring verification with the manufacturer manual
Detailed Review

The Napoleon Ascent B36 (model B36NTRE-1) is a built-in direct-vent natural gas fireplace designed for homeowners, builders, and remodelers seeking an attractive, permanent hearth centerpiece. Styled with a clean-face frame that eliminates exterior metal louvers, this unit allows finishing materials like stone, tile, or drywall to frame right up to the firebox. It best suits property owners planning a permanent living room, family room, or media space installation connected to a residential natural gas line.

Burner performance and visual ambiance center on Napoleon's pan-style burner, which distributes gas evenly under the exclusive PHAZER log set and glowing ember bed. The included logs and ember media replicate the warm, organic glow of real firewood without requiring any ash disposal or chimney cleaning. Thanks to the built-in flame and heat adjustment controls, you can decrease the flame height on warmer evenings or increase output when supplemental comfort is needed.

For everyday operation, the electronic ignition system provides straightforward, energy-conscious startups without keeping a standing pilot flame running constantly. A critical advantage of this control layout is the backup power system, which maintains functionality during electrical blackouts. For homeowners in cold-weather regions vulnerable to winter storm outages, this feature provides practical peace of mind by keeping an active heat source operational when the main grid fails.

Because the B36 Ascent is a direct-vent appliance, it operates within a sealed combustion loop, bringing in fresh outside air for burning while safely expelling exhaust outdoors via direct-vent pipe. Planning the installation requires proper rough-framing cutouts, gas supply line plumbing, and appropriate vent pipe clearances through an exterior wall or roof. Due to the technical nature of gas lines and sealed venting, installation should be handled by a licensed professional following local building and mechanical codes.

Buyers should keep in mind that this unit is dedicated to natural gas use, and any potential conversion to liquid propane requires verifying the availability of an approved conversion kit before purchase. Additionally, exact framing dimensions, clearances to combustibles, and specific BTU ratings are not detailed in the raw listing data and must be verified in Napoleon's official product documentation before framing begins.

For remodelers and homeowners looking for a reputable direct-vent gas fireplace that blends clean architectural lines with emergency power-outage readiness, the Napoleon Ascent B36 delivers dependable warmth and a classic fire view.

Fuel & Venting

The Napoleon Ascent B36 (SKU: B36NTRE-1) is factory-configured to run on natural gas and requires a dedicated gas supply line. Direct-vent technology uses a co-axial or co-linear sealed pipe system that pulls fresh combustion air from outside the home while venting combustion gases directly outdoors, protecting indoor air quality.

Because venting routes must conform to strict horizontal and vertical length limits specified by the manufacturer, buyers should verify framing depth, chase clearances, and exterior termination locations with a certified gas professional prior to installation.

Flame & Controls

This fireplace utilizes an electronic ignition mechanism paired with a pan-style burner for smooth, reliable ignition. Inside the sealed combustion chamber, Napoleon's PHAZER log set and glowing ember bed create a natural flame pattern with realistic depth and glow.

Flame and heat adjustment controls allow users to tailor both the flame height and heating output to match room comfort requirements. An integrated backup control system ensures that the fireplace remains functional during electrical outages, delivering dependable heat when household power is lost.

Frequently Asked Questions

Can a natural gas pilot assembly work on a propane direct vent fireplace?

No, natural gas pilot assemblies cannot operate on liquid propane systems without an exact orifice conversion. Liquid propane operates under higher gas pressure and requires a smaller orifice diameter to ensure safe combustion. Using an unmatched pilot assembly causes heavy soot buildup, unstable flames, and delayed burner ignition. Always verify the specific fuel rating on the pilot bracket before servicing your appliance.

What distinguishes millivolt gas fireplace valves from electronic ignition systems?

Millivolt valves generate their own electrical charge using a thermopile heated by a standing pilot, keeping the burner functional during power outages. Electronic ignition systems instead rely on intermittent spark igniters powered by battery packs or household voltage. Handheld remotes like the Napoleon F45 connect directly to millivolt terminal blocks. Electronic ignition eliminates standing pilot fuel consumption when the fireplace stays idle.

How do you determine if a replacement SIT pilot assembly fits your gas fireplace?

Check the bracket mounting orientation, gas tubing length, and manufacturer part number on your existing pilot hood. Many direct-vent units utilize side-mount SIT pilot assemblies like the WS-100-38 with 24-inch component leads. While traditional hearths might use a fireplace grate set extender, sealed direct-vent fireboxes permit only manufacturer-specified components. Matching the exact OEM part number ensures reliable flame detection and proper spark placement.

Will a direct vent gas fireplace continue heating during a power failure?

Yes, units equipped with standing millivolt pilots or battery-powered control modules operate reliably during grid electrical outages. The thermopile generates sufficient micro-voltage from the pilot flame to trigger the main burner without household electricity. Modern clean-face direct-vent fireplaces often incorporate battery backup packs to keep electronic igniters functioning in winter storms. Convective blowers will shut off without external power, but radiant heat continues.

What maintenance does a Napoleon 39 Elevation E36 Direct Vent Gas Fireplace require before winter in 2026?

Inspect the pilot assembly, remove lint from the burner ports, and check the direct-vent glass gasket seal before every heating season in 2026. Dust can block pilot air openings, producing weak flames that fail to trigger safety switches. Checking the outdoor vent termination for bird nests or debris maintains proper combustion draft. Never operate a direct-vent gas fireplace with damaged glass or loose mounting clamps.