Improving Air Circulation in Gas and Fireplace Enclosures
Trapped heat inside a firebox cavity leaves rooms cold while fuel burns away, which frustrates anyone relying on supplemental hearth warmth. Installing a dedicated fan system pulls cool air from the floor, circulates it across hot sheet metal, and pushes warm air right back into living zones. Evaluating replacement options like the green fan gf160akit with dchg blower stainless steel fireplace requires looking closely at mounting clearance, blower motor insulation, and noise dampening pads. Many homeowners pairing upgrades with ventless gas fireplaces discover that proper air movement completely changes room comfort without altering the primary burner setup.
Motor ratings tell you whether an assembly can take the intense temperatures behind steel fireboxes over long heating cycles. Quality kits feature Class H motor insulation rated up to 392 degrees Fahrenheit, sealed ball bearings, and magnetic snap discs that kick on automatically around 120 degrees Fahrenheit. If you are retrofitting an enclosure or pairing your unit with a brushed nickel fireplace bezel, verifying baseplate dimensions prevents tricky rattles and alignment headaches. Taking time to inspect airflow ratings up to 160 CFM and rheostat speed controls ensures you get steady warmth instead of annoying fan hum.
Pros
- Delivers 160 CFM airflow to actively circulate heat that would otherwise stay trapped around the firebox
- Complete replacement package includes the blower assembly, rheostat controller, wiring harness, power cord, and vibration pads
- Class H thermal insulation rating handles elevated interior chassis temperatures up to 392 degrees Fahrenheit
- Extensive compatibility list covers dozens of common factory-built fireplace models from Desa, FMI, and Vanguard
Cons
- Requires manual clearance verification as cavity space inside lower fireplace louvers can vary across production years
- Operates via a manual rheostat switch rather than including an automatic thermal snap disc thermostat
- Wiring and power cord require careful positioning away from direct high-heat firebox surfaces during installation
The Aibabcue GA3650 / GA3700 Fireplace Blower Fan Kit is a replacement convection motor assembly designed to circulate warm air that naturally collects inside a fireplace outer jacket. This replacement kit is tailored for homeowners, property managers, and remodelers dealing with a seized, noisy, or missing factory blower in compatible factory-built gas and wood fireplaces from manufacturers such as Desa, FMI, Vanguard, Comfort Glow, and Comfort Flame.
Air movement is rated at 160 CFM with motor speeds reaching up to 3000 RPM, allowing the assembly to actively push convection heat out through the upper louvers and into the room. The inclusion of a dial-style rheostat variable speed switch enables users to manually balance airflow output against operating volume, dialing down the speed when low background noise is preferred or turning it up to maximize room circulation.
Because temperatures around fireplace chassis components run high, the motor features Class H insulation rated up to 392 degrees Fahrenheit (200 degrees Celsius). The housing uses heat-resistant materials, and the package supplies noise reduction padding to sit beneath the assembly, dampening metal-on-metal motor vibrations that can cause humming across sheet metal hearth enclosures.
For electrical supply, the kit operates on a standard 120V, 60 Hz household circuit and includes a pre-wired harness with a 3-prong plug. Measuring 15 inches wide by 3.5 inches deep by 4 inches high, the blower is built to slide through bottom access louvers. Power cords and lead wires must be carefully routed and secured away from direct firebox contact to prevent heat damage.
Prospective buyers should verify physical dimensions and confirm electrical access inside their fireplace before ordering. This assembly relies on a manual rheostat control rather than an automated thermostatic sensor, meaning the fan must be turned on and off manually unless connected to a pre-switched fireplace outlet. For units with tight access openings, measuring existing mounting brackets against this 15-inch unit is an essential pre-purchase step.
For owners of compatible Desa, Vanguard, or FMI appliances seeking to restore lost heat circulation without paying OEM prices, this kit provides a straightforward, hardware-complete solution. As long as cavity dimensions and plug-in power are verified in advance, it serves as a functional, cost-conscious repair part.
This blower kit cross-references multiple common fireplace part numbers, including GA3650, GA3700, GA3750, GA3560A, GA3650TB, GA3700A, GA3750A, BK, BKT, 103581-01, 103581-02, 103581-03, 103581-04, DA3610TA, and IHP part numbers #F1081 and #F1082.
Manufacturer compatibility includes selected models from Desa Tech, FMI, Vanguard, Vexar, Astria, Comfort Flame, and Comfort Glow. Specific supported Desa models include the B36/VB36 Bungalow, B36L-MC, BV36L Cape Cod, B42 Bungalow, BHDV37, BHDV41, BV42L Cape Cod, CB36, CGEFP33, CHDV32NR, CHDV36NR, CSGF28, CTDV32NR, CTDV36NR, and CWB36C.
Supported Vanguard models include BV36L/BV42L, CWB36C, VB36, VB42, VBV36L/VBV42L, VC36L, and V42L. Compatible FMI units include B36L-MC, BV36L, B42, BV42L, BFBF36/42, BFBL36/42, C36/42, CD36, CDC36, CDV36, CGCDV36/42, CHDV36NR series, VBV36L/VBV42L, VB42, VC36/42, VCC36/42, VCD36, VCDC36, VDVC36/42, and VFB32. Comfort Flame listings include B36L-M, B42LI-M, and CUVF36/42, while Comfort Glow listings include CDV34, CDV37, CDV41, CHDV36NR, and CHDV47.
Because fireplace manufacturers frequently changed inner firebox dimensions across different production years, always measure the clearance in your lower access panel and compare with the blower dimensions (15 x 3.5 x 4 inches) prior to ordering.
Operating Voltage: 120 Volts AC, 60 Hz.
Airflow Capacity: 160 CFM (Cubic Feet per Minute).
Motor Speed: Up to 3000 RPM.
Thermal Protection: Class H motor insulation rated to 392 degrees Fahrenheit (200 degrees Celsius).
Physical Dimensions: 15 inches length by 3.5 inches depth by 4 inches height.
Speed Control: Rheostat variable speed control dial included.
Power Connection: Grounded 3-prong power cord with wiring harness included.
Vibration Control: Noise reduction padding included in the package.
Pros
- Hands-free magnetic thermal switch prevents blowing cold air on start-up by only engaging once the fireplace heats up.
- Variable rheostat speed control allows users to balance airflow volume against operational sound.
- Includes complete pre-wired harness, 83-inch power cord, rubber isolation feet, and thermostat for a streamlined installation.
- Class H motor insulation handles demanding high-heat environments up to 392°F.
Cons
- Requires physical verification of lower-cavity clearance to ensure the 12 13/16-inch chassis fits properly.
- Fireplace must have an active 115V grounded electrical junction box installed in or near the lower compartment.
- Airflow sound is noticeably more audible when operating at the maximum 3000 RPM setting.
The Hiorucet GFK-160A Fireplace Blower Fan Kit is a replacement convection air assembly designed for gas and wood fireplaces from manufacturers such as Heat N Glo, Heatilator, Quadra-Fire, Superior, and Regency. It serves homeowners and property managers who want to capture thermal energy normally trapped behind the metal firebox and push it outward into the room. Rather than relying on slow radiant heat transfer, this kit uses forced convection to improve supplemental warmth in everyday living areas.
Airflow performance is driven by a 115V, 60Hz motor turning at up to 3000 RPM to generate a listed 160 CFM rating. The kit features a magnetic snap-disc thermostat designed to automate blower cycles based on firebox temperature. It closes the electrical circuit to turn the fan on when lower-cavity temperatures hit roughly 120°F, then opens the circuit to shut the fan down when temperatures cool past approximately 90°F (+/- 5°F). This prevents the blower from pushing unheated room air while the fire is just getting started.
Build quality centers on high-heat resilience and vibration reduction. The motor features dual ball bearings for smooth continuous rotation and carries Class H insulation rated to withstand internal operating temperatures up to 392°F. To mitigate metal-on-metal noise common in aftermarket installations, the blower base includes integrated rubber mounting feet that isolate motor hum and prevent sheet-metal resonance during high-speed operation.
Installation is designed for standard fireplace bottom access compartments. The assembly measures 12 13/16 inches long, 4 5/16 inches wide, and 4 5/16 inches high, equipped with two 4.75-inch air discharge outlets. A pre-wired wiring harness connects the dual blower motor, the magnetic thermal disc, and the variable rheostat speed dial. Power is supplied via an 83-inch, 3-prong grounded cord that plugs into an existing 115V outlet located within the fireplace cavity.
Verification of clearance is essential before ordering. While cross-referenced for dozens of models such as the Heat N Glo 6000CLX, SL-550TR, and Hearth and Home DV3732, buyers must measure the available floor space beneath their burner pan to ensure proper clearance. This unit is an electrical accessory requiring a functioning standard outlet and does not generate heat independently, nor will it work in fireplaces lacking adequate internal mounting depth.
For owners seeking to restore or add forced-air circulation to their compatible gas or wood fireplace, the Hiorucet GFK-160A represents a practical, fully equipped retrofit. Its combination of automatic thermal switching, adjustable airflow speed, and heat-resistant construction provides reliable circulation value backed by a 365-day return and exchange policy.
The blower assembly operates at 115 volts and 60 Hz, driving a dual ball bearing motor up to 3000 RPM with an airflow rating of 160 CFM. It splits airflow across dual 4.75-inch air discharge openings to distribute warm air evenly across the front louver vents of compatible fireplaces.
Motor insulation is certified to Class H standards, providing thermal protection against temperatures up to 392°F. Rubber mounting pads are integrated into the frame to absorb rotational vibration and reduce vibration noise against the fireplace base plate.
The kit features a rheostat dial that provides manual variable-speed control. Turning the dial clockwise powers the unit on at low speed and progressively increases motor RPM up to the maximum high setting.
The included magnetic thermostat attaches directly to the metal exterior of the firebox floor or back wall without drilling. It automatically activates power at approximately 120°F and deactivates at roughly 90°F. The entire unit connects through a pre-wired harness powered by an 83-inch, 3-prong grounded electrical cord.
The GFK-160A kit replaces multiple OEM blower part numbers, including GFK-160, FAB-1600, Rotom HB-RB168, R7-RB168, Fasco A133, 45KC49, Regency 846515, and 490-917. It also covers Heat N Glo part numbers 7002-1241, 7002-2944, 7102-2944, 7002-2311, 7002-2143, 7002-1615, 7102-1615, 7002-2152, 7102-2152, and 7058-1221.
Listed compatible fireplace series include Heat N Glo (6000CLX, SL-550TR), Hearth and Home (DV3732, DV3732-B), Quadra-Fire, Heatilator, Superior, GTI, Jakel, Royal, Nordica, and Regency. Verify your fireplace model number and confirm physical cavity dimensions of at least 12.81 x 4.31 x 4.31 inches prior to installation.
Pros
- Quiet 26 dBA sound rating keeps background blower noise to a minimum.
- Wireless remote provides 10 precise digital speed settings without opening lower fireplace louvers.
- Energy-efficient DC motor with dual ball bearings delivers up to 120 CFM airflow.
- Compact standard sizing fits multiple brand replacements including select Lennox, Majestic, Hearth Glo, and Rotom units.
Cons
- Buyers must measure their lower fireplace cavity to verify clearance for the 10.5 x 3.5 x 3.6-inch housing.
- Circulates existing fireplace heat only; overall warming output depends entirely on the fireplace heat source.
- Requires access to an electrical power source within or adjacent to the fireplace blower compartment.
The AC Infinity AIRBLAZE S10 is a dedicated 10-inch fireplace blower fan kit engineered to improve heat distribution in compatible residential gas and wood fireplaces. Designed for homeowners looking to replace a worn factory blower or boost heat circulation from an underperforming fireplace cavity, this unit pushes trapped warmth outward into the living room rather than allowing it to pool inside the firebox structure.
Air movement is driven by an energy-efficient DC motor paired with dual ball bearings, generating up to 120 CFM of airflow. Unlike standard fixed-speed AC blowers that can produce noticeable electrical hum, the AIRBLAZE S10 maintains a low 26 dBA sound level at lower speeds. The system uses pulse-width modulation (PWM) digital controls across 10 speed levels, allowing users to dial in gentle, barely audible circulation or switch to higher velocities for faster warm-air distribution.
Control is managed via an included 10-speed wireless remote, eliminating the need to kneel down and reach inside hot lower louvers to adjust fan output. The digital speed controller communicates directly with the DC motor for smooth step adjustments across the entire airflow range. This wireless setup adds practical daily convenience, allowing you to regulate heat circulation directly from a couch or dining area.
In terms of dimensions, the blower measures 10.5 inches wide, 3.5 inches deep, and 3.6 inches high. Its standard-size footprint allows it to serve as a direct replacement blower for select models from brands such as Lennox, Hearth Glo, Majestic, and Rotom. The black housing and dual ball bearing assembly are built for steady, long-term rotation in warm lower-chassis environments.
A critical consideration before ordering is physical clearance. Fireplace compartments vary widely across production years and trim levels, so buyers must measure their fireplace lower access cavity and confirm electrical outlet availability. Additionally, the unit does not produce heat independently; its performance depends on the thermal output of your existing gas or wood fireplace.
For homeowners aiming to maximize room warmth while keeping mechanical noise low, the AC Infinity AIRBLAZE S10 offers a solid balance of air movement, quiet DC operation, and remote convenience. It serves as an effective, modern replacement for noisy older blowers in compatible fireplace enclosures.
The blower operates on a DC motor system rated at up to 120 CFM of maximum airflow, designed to move substantial air volume through standard lower-louver configurations. Dual ball bearings reduce rotational friction, contributing to a published operational noise level of 26 dBA.
Digital PWM control allows the motor to run smoothly across 10 distinct speed steps without the buzzing often encountered on variable AC motor speed dials. This makes it adaptable for both quiet nighttime heating and rapid daytime warming.
The fan housing measures approximately 10.5 x 3.5 x 3.6 inches (listed in detailed specifications as 3.6 x 10.27 x 3.53 inches). The manufacturer lists this standard form factor as compatible for replacement use in select Lennox, Hearth Glo, Majestic, and Rotom fireplaces.
Because individual fireplace models feature varying bracket locations, lower access depths, and electrical configurations, homeowners should verify physical compartment dimensions and power access prior to installation.
Pros
- Direct fit for Pleasant Hearth GFB100 blower assemblies on supported vent-free fireplaces
- Automatic thermostat sensor starts the fan at 113 degrees Fahrenheit without manual intervention
- Complete package includes wiring harness, mounting hardware, and pre-wired 3-prong power cord
- Sealed ball bearings help minimize mechanical motor noise during extended operation
Cons
- Fixed 50 CFM airflow rate does not offer multi-speed or variable rheostat adjustment
- Requires manual dimension and cavity verification before purchase to ensure proper fit inside the fireplace bottom recess
The Aibabcue GFB100 Fireplace Blower Kit is an aftermarket forced-air replacement fan engineered specifically for Pleasant Hearth ventless gas fireplaces. This kit caters directly to homeowners, property managers, and remodelers who need to replace a failing factory blower or add active heat circulation to compatible vent-free fireboxes such as the VFF-PH20D, VFF-PH26D, and VFF-PH32DR series. Rather than relying solely on natural heat convection, this accessory provides mechanical assistance to push warmth into living areas.
Airflow performance is driven by a 120-volt, 60 Hz electric motor rated at 50 CFM (cubic feet per minute). This airflow level is tailored to move warm air out of the fireplace chassis without creating harsh drafts or disrupting the burner flames. The kit features a 2-in-1 control layout: users can switch between a standard manual rocker switch for on-demand use or an automatic mode powered by an included temperature disc that turns the fan on once internal heat reaches 113 degrees Fahrenheit.
Regarding build construction, the blower housing uses high-temperature resistant materials designed for the warm conditions found inside gas fireplace service cavities. The internal motor utilizes sealed ball bearings, which help reduce operating friction, dampen motor hum, and improve overall operational longevity compared to basic sleeve bearings. The kit arrives fully equipped with a grounded 3-prong power cord, an insulated wiring harness, a rocker switch, a thermostat sensor, mounting screws, and cable ties.
Installation takes place in the lower compartment beneath the burner assembly, utilizing the unit's physical dimensions of 3 inches deep by 9.5 inches wide by 4 inches tall. Setup involves mounting the blower bracket, attaching the magnetic or screw-mounted temperature disc against the warm firebox metal, and routing the wiring harness to the manual switch and a standard 120V outlet. Buyers must ensure that their specific fireplace model includes an active grounded electrical receptacle inside or adjacent to the lower service cavity.
A realistic consideration with this model is its fixed output. At 50 CFM, it provides gentle supplemental air displacement, which is well-suited for targeted living room heating but lacks the high-volume output of larger multi-speed aftermarket blowers. Furthermore, because Pleasant Hearth manufactured several cabinet revisions, buyers should measure their existing blower opening and cross-check model numbers to verify clearance before ordering.
For owners of compatible Pleasant Hearth vent-free fireplaces who want to restore warmth distribution or replace a seized motor, this Aibabcue replacement kit offers a direct, functional remedy. The combination of pre-wired components, automatic thermal switching, and direct GFB100 form factor compatibility makes it a dependable accessory for improving supplemental fireplace efficiency.
This kit is engineered to replace part number GFB100 across a wide selection of Pleasant Hearth ventless and vent-free gas fireplaces. Supported natural gas and propane models include the VFF-PH20D, VFF-PH20D-C, VFF-PH20DB, VFF-PH20LP, VFF-PH20LP-2T2, and VFF-PH20LP-C2.
It also fits larger units within the series, including the VFF-PH26D, VFF-PH26D-T, VFF-PH26LP, VFF-PH26LP-2H2, VFF-PH32DR, VFF-PH32LP, VFF-PH32LP-2C2, VFF-PHCPD-2T, and VFF-PHFSDR-2C, as well as VFF2 series models such as the VFF2-PH20D, VFF2-PH20DB, VFF2-PH26D, and VFF2-PH32DR-H.
Because physical dimensions must match the lower cavity opening, buyers should confirm that their existing blower space accommodates the 3 x 9.5 x 4-inch outer profile before completing installation.
The Aibabcue GFB100 operates on standard North American residential electrical service, requiring a 120-volt, 60 Hz power source via its attached 3-prong grounded plug. The motor is engineered for energy-conscious power consumption during regular heating cycles.
The fan assembly generates an airflow rating of 50 CFM, directed through the blower chassis into the room. The automatic thermal sensor is calibrated to engage electrical continuity when ambient compartment temperatures exceed 113 degrees Fahrenheit, allowing the fan to cycle on and off automatically as the fireplace heats up and cools down.
Pros
- Complete replacement kit includes blower motor, magnetic thermal switch, rheostat dial, and pre-wired 3-prong power cord
- Automatic thermostatic operation activates and shuts off based on firebox temperature without requiring manual switching every fire
- Durable ball-bearing motor construction with Class H insulation rated to 392 degrees Fahrenheit
- Anti-vibration foam padding helps reduce noise transmission against sheet metal fireplace walls
Cons
- Requires adequate interior cavity clearance (12.5 x 3.23 x 3.73 inches) and an active internal 120V electrical outlet
- Higher speed settings generate audible airflow noise typical of compact high-RPM squirrel-cage blower wheels
- Does not increase total heat output of the fireplace, functioning strictly as a circulation mechanism
The Hiorucet BLOT BLOTMC Fireplace Blower Fan Kit is an aftermarket air-circulation assembly engineered for homeowners needing to replace a worn factory blower or add forced-air convection to compatible fireplaces. Designed primarily for models from Monessen, Majestic, Martin, Hearth Systems, and Hunter, this kit fits lower access compartments that accommodate its 12.5-inch footprint. If you want to push trapped warm air away from your firebox sheet metal and circulate it out into your family room or living area, this all-in-one replacement package offers a practical solution.
Performance centers on a ball-bearing electric motor rated at 3,000 RPM, delivering an airflow rating of 130 cubic feet per minute (CFM) across a 9.57-inch air discharge opening. Rather than producing heat on its own, this blower pulls cooler ambient room air from underneath the fireplace and forces it over hot exterior firebox surfaces before returning warm air to the room. The inclusion of a rheostat variable speed dial allows users to balance airflow volume against fan noise, making it easier to maintain conversation levels while running the fireplace.
Durability in a high-temperature hearth enclosure is supported by Class H motor insulation rated to withstand temperatures up to 392 degrees Fahrenheit. The unit runs on standard residential power, drawing 31 watts at 120 volts and 60 Hz via a grounded 3-prong power cord. The ball bearing architecture provides smoother rotation and greater heat tolerance compared to standard sleeve bearings, which is critical given the ambient heat generated by gas inserts and wood fireplace housings.
Installation is straightforward in fireplaces equipped with an internal 120V electrical receptacle. The kit includes a pre-wired harness, double-sided foam mounting pads, a variable speed controller, and a magnetic thermostat switch. The snap-disc thermostat mounts magnetically directly against the firebox metal, closing the electrical circuit automatically once temperatures reach approximately 120 degrees Fahrenheit and cutting power when the chassis cools to around 90 degrees Fahrenheit (+/- 5 degrees tolerance). The adhesive foam pads provide both physical mounting hold and acoustic dampening to prevent the blower from vibrating against bare sheet metal.
Before ordering, buyers must physically measure the available space in their lower fireplace access compartment to confirm it clears the 12.5 by 3.23 by 3.73-inch dimensions. Although the kit replaces numerous cross-referenced part numbers like BLO, BLOT, BLO24, and Rotom HB-RB94, it is not universally compatible with all hearths. Buyers must also ensure their fireplace cavity features a functional 120-volt power outlet, as the kit relies on a standard 3-prong plug rather than hardwired screw terminals.
For owners of compatible Monessen, Majestic, or Martin gas and wood fireplaces, the Hiorucet BLOT replacement kit offers a budget-friendly way to restore automatic convection heating. Its combination of thermal switching, adjustable speed control, and vibration reduction padding makes it a solid aftermarket upgrade for maximizing warm air distribution across your hearth space.
The Hiorucet blower kit cross-references multiple common OEM part numbers, including BLO, BLOT, BLO24, BLO24T, BLOTSC, BLOTKLH, FAZA, Rotom HB-RB94, R7-RB94, Rotom HB-RB79, and R7-RB79.
While designed to fit various Monessen, Majestic, Martin, Hearth Systems, and Hunter models, successful installation depends on having adequate mounting space inside the lower fireplace cavity. Product dimensions measure 12.5 inches in length, 3.23 inches in width, and 3.73 inches in height, with an air discharge span of 9.57 inches.
Always verify the physical dimensions of your existing blower compartment and confirm the presence of an active 120V grounded outlet before purchasing.
The motor operates on 120V, 60 Hz power, consuming 31 watts while generating up to 130 CFM of airflow at 3,000 RPM.
Engineered for high-heat environments, the blower features Class H insulation rated up to 392 degrees Fahrenheit alongside dual ball bearings for reliable, durable rotation.
The included magnetic thermostat operates automatically, turning the fan on when the firebox reaches approximately 120 degrees Fahrenheit and shutting off when temperatures drop back below roughly 90 degrees Fahrenheit.
Pros
- Complete kit with pre-wired harness, magnetic thermostat, rheostat dial, and 83-inch power cord.
- Dual sealed ball bearings and Class H insulation (392°F) support high-heat longevity.
- Hands-free magnetic snap thermostat automatically cycles the fan on at 120°F and off at 90°F.
- Rubber mounting feet reduce vibration noise against the sheet-metal firebox floor.
- Direct fit for multiple major brands including Heat N Glo, Quadra-Fire, and Heatilator.
Cons
- Requires manual clearance measurement in the fireplace lower cavity prior to ordering.
- Requires a functional 120V grounded electrical outlet located inside or adjacent to the fireplace lower compartment.
- Running the motor at maximum 3000 RPM setting can produce noticeable air movement sound.
The Criditpid GFK-160A Fireplace Blower Fan Kit is an aftermarket convection-fan assembly designed for homeowners seeking to improve room-level heat circulation from compatible factory-built gas and wood fireplaces. Built to replace or add onto equipment from brands such as Heat N Glo, Quadra-Fire, Heatilator, Superior, and Majestic, this complete blower kit is ideal for users whose fireplaces generate high firebox temperatures that otherwise remain trapped behind louvers or sheet metal.
Air movement is generated by a dual-squirrel-cage blower system capable of producing up to 160 CFM of airflow at 3000 RPM, discharged through twin 4.75-inch air outlets. Operation is automated by an included magnetic snap-disc thermostat that engages the fan once the firebox reaches approximately 120 degrees Fahrenheit and cuts power when the firebox cools down to 90 degrees Fahrenheit. For customized comfort, an inline rheostat rotary switch allows users to dial in continuous fan speed between low and high settings.
Construction features sealed ball bearings on both the motor and outboard positions to reduce mechanical friction and ensure balanced rotation over long heating cycles. The motor windings carry a Class H insulation rating certified up to 392 degrees Fahrenheit, offering the necessary thermal protection required inside compact, high-heat fireplace cavities. Rubber mounting feet are affixed to the base to dampen rotational vibration against sheet-metal fireplace floors, helping minimize chassis resonance.
Installation utilizes a pre-wired harness that simplifies electrical connections, ending in a standard 83-inch, 3-prong grounded plug. The unit operates on standard 120V, 60 Hz electrical service drawing 1.3 amps. The overall dimensions measure 12 13/16 inches in length, 4 5/16 inches in width, and 4 5/16 inches in height, fitting into the lower mechanical service access space found under the floor of compatible fireboxes.
Prospective buyers should verify that their fireplace model has sufficient physical clearance in the lower compartment before ordering, as gas supply lines, valve assemblies, or control modules can reduce available space. Additionally, this kit relies on an accessible, powered 120-volt outlet within reach of the 83-inch power cord to function, which may require checking your fireplace's internal junction box wiring.
For owners of compatible Heat N Glo, Quadra-Fire, Heatilator, or Majestic fireplaces wanting to push warm air across a living room or family room without paying OEM equipment prices, the Criditpid GFK-160A offers a dependable, fully equipped solution. Its combination of dual ball bearings, high-temperature Class H motor insulation, and automated thermal cycling provides a reliable way to optimize home zone heating.
The GFK-160A features a dual-wheel blower layout that produces up to 160 CFM of circulating airflow at an operating speed of up to 3000 RPM. Dual 4.75-inch air discharge ports direct convective air upward and around the outer firebox mantle louvers.
Mechanical performance relies on sealed ball bearings installed at both the motor and outboard bearing locations to maintain balance, reduce resistance, and resist thermal wear. The electrical motor is engineered with Class H insulation rated to withstand temperatures up to 392 degrees Fahrenheit.
Vibration-dampening rubber feet are integrated into the lower brackets, decoupling the high-RPM fan motor from the fireplace bottom plate to reduce humming and rattle during operation.
This kit is designed as an aftermarket replacement for factory part numbers GFK-160, GFK-160A, and FAB-1600. It cross-references with Heat N Glo part numbers including 7002-1241, 7002-2944, 7102-2944, 7002-2311, 7002-2143, 7002-1615, 7102-1615, 7002-2152, 7102-2152, and 7058-1221.
Additional cross-references include Rotom HB-RB168 and R7-RB168, Royal GFK-160, Regency 846515 and 490-917, Fasco A133 and 45KC49, and UPPCO 1601881.
Compatible fireplace models include Heat N Glo SL-750TR and SL-750TR-C, Quadra-Fire 7100, Hearth and Home DV3732, as well as select Superior, Majestic, and GTI gas fireplaces designed to accommodate GFK-160 blower configurations. Buyers must verify compartment dimensions (12 13/16" L x 4 5/16" W x 4 5/16" H) before ordering.
The kit includes a pre-wired harness to minimize wiring complexity during setup. Electrical power is supplied via an 83-inch, 3-prong grounded plug designed for standard 120-volt, 60 Hz household circuits drawing 1.3 amps.
Temperature automation is handled by a magnetic snap-disc thermostat that sticks directly onto the metal underside or back of the firebox. It automatically powers the blowers when the firebox heats up to 120 degrees Fahrenheit and shuts them off when the firebox cools below 90 degrees Fahrenheit.
An inline rheostat speed controller allows users to dial in continuous motor speeds between low and high, providing precise control over room air velocity and motor sound.
Pros
- Complete all-in-one kit includes blower, magnetic thermal switch, variable-speed dial, wire harness, and grounded power cord
- Automatic magnetic snap switch activates around 120 degrees Fahrenheit and powers down at 90 degrees Fahrenheit to prevent circulating cold air
- Dual ball bearing motor with Class H insulation rated up to 392 degrees Fahrenheit for lasting heat tolerance
- Rubber isolation feet help isolate motor vibration from the fireplace floor panel
Cons
- Requires an accessible 120V electrical outlet inside or adjacent to the lower fireplace cavity
- Air circulation depends on exact clearance within the lower fireplace compartment matching its 12 13/16-inch length
- Circulates existing warmth more effectively but does not generate additional BTU output on its own
The Adviace GFK-160A Fireplace Blower Fan Kit is an aftermarket forced-air replacement system built specifically for factory-built fireplaces requiring active air movement. It targets owners of select Heat-N-Glo, Hearth and Home, Superior, and Quadra-Fire units who want to upgrade a passive radiant fireplace or replace a failed OEM blower assembly. Rather than letting heated air linger around the firebox casing, this kit pushes warm air outward into the room to improve overall supplemental comfort.
Airflow performance centers on a 160 CFM blower assembly spinning up to 2,700 RPM. A key functional advantage is the dual-control arrangement combining an automatic magnetic thermostat and an adjustable rheostat. The magnetic sensor attaches directly to the metal underside of the firebox, sensing rising temperatures to turn the fan on automatically when the fireplace reaches roughly 120 degrees Fahrenheit. Once the fire is extinguished and the metal cools below 90 degrees Fahrenheit, the sensor turns the fan off, keeping the unit from circulating chilled air. The included rheostat allows manual speed tuning so users can dial between maximum air movement and lower, quieter operation.
Build quality focuses on high-temperature resilience and mechanical stability within tight fireplace floor compartments. The motor uses dual ball bearings for both the main motor and outboard support, paired with Class H motor insulation rated to withstand temperatures up to 392 degrees Fahrenheit. To address the mechanical noise often associated with metal-on-metal fireplace retrofits, the assembly features rubber mounting isolation feet that help dampen vibrations before they resonate through the sheet-metal hearth enclosure.
Installation requires matching physical cavity dimensions and available electrical power. The blower housing measures 12 13/16 inches long, 4 5/16 inches wide, and 4 5/16 inches high, with twin air discharge openings measuring 4.75 inches each. The system connects using an included pre-wired harness and an 83-inch, heavy-duty three-prong grounded power cord designed for standard 120V, 60 Hz household receptacles. Users must have an approved outlet or junction box pre-installed in the bottom fireplace chamber to power the kit.
While the kit cross-references numerous popular factory part numbers, it is not a universal fit for every fireplace on the market. Buyers must verify that their fireplace model specifically accepts the GFK-160, GFK-160A, FAB-1600, or related cross-referenced assemblies, and that sufficient clearance exists behind the lower access panel. Additionally, buyers should remember that blowers assist convective heat movement through room air exchange, but they do not alter the fireplace burner rating or total BTU production.
For homeowners seeking an accessible, feature-complete replacement blower for compatible Hearth and Home or Heat-N-Glo systems, the Adviace GFK-160A offers strong practical value. The combination of thermal auto-switching, variable speed adjustment, and vibration-dampening feet makes it a well-rounded kit that delivers reliable air circulation when properly matched to your appliance.
The Adviace GFK-160A features a twin-wheel blower assembly capable of moving up to 160 CFM of air through lower and upper fireplace louvers. Powered by a 2,700 RPM motor, the assembly pushes ambient room air around the outer heating jacket of the firebox and discharges it forward into the living area.
The system incorporates a magnetic snap-disc thermostat rated for 120 degrees Fahrenheit activation and 90 degrees Fahrenheit deactivation. This magnetic backing allows placement on steel firebox panels without drilling, ensuring the fan only operates when usable heat is present. A full-range variable-speed rheostat switch lets you regulate fan velocity to manage sound levels and airflow output based on room preference.
This kit is engineered to replace several standard factory-installed blower units across Hearth and Home brands. Documented cross-reference part numbers include GFK-160, GFK-160A, FAB-1600, FAB-1100, HB-RB168, 1601881, 950-3315, 107-500A, and A133.
It also replaces specific Heat & Glo branded part numbers including 7002-1241, 7002-2944, 7102-2944, 7002-2311, 7002-2143, 7002-1615, 7102-1615, 7002-2152, 7102-2152, and 7058-1221. Buyers should verify their fireplace manual, chassis label, or existing blower part number prior to purchase to confirm exact mechanical and dimensional compatibility.
Operating on standard 120V, 60 Hz electrical service, this kit comes with an 83-inch, heavy-duty three-prong grounded power cord that plugs into an existing receptacle located in the lower fireplace cavity or blower compartment.
The physical footprint measures 12 13/16 inches in length, 4 5/16 inches in width, and 4 5/16 inches in height. Installation involves sliding the blower into the lower access opening, securing the magnetic thermostat to the bottom of the warm firebox floor, mounting the rheostat control switch, and plugging into the electrical receptacle according to the included instructions.
Frequently Asked Questions
Does a replacement blower like the Green Fan Gf160akit With Dchg Blower Stainless Steel Fireplace increase the total heat output of a fireplace?
No, a blower fan does not create additional BTUs or increase the burner’s heating capacity. Instead, a unit like the green fan gf160akit with dchg blower stainless steel fireplace pulls ambient room air through lower vents, pushes it around the hot outer firebox walls, and expels warmed air forward. This process improves heat circulation and room distribution so heat does not linger idly behind the metal walls. Pairing active convection with proper hearth accessories, such as a sturdy traditional steel fireplace grate in wood hearths or sealed blowers in gas boxes, helps warm large rooms much faster.
How does an automatic magnetic thermostat work on a fireplace blower kit?
Magnetic thermal switches activate the blower motor automatically based on ambient firebox temperature. The magnetic sensor attaches directly to the bottom or rear steel wall of the firebox without drilling. Most kits feature a switch that closes at approximately 120 degrees Fahrenheit to start the fan and opens at roughly 90 degrees Fahrenheit to shut it down. This prevents the blower from pushing uncomfortably chilly air into your living space during startup and cool-down cycles.
What electrical power source is required to run these fireplace fan kits in 2026?
Standard fireplace blower assemblies operate on 115V to 120V AC household current at 60 Hz. Most replacement kits arrive equipped with a pre-wired grounded 3-prong power cord designed to plug directly into the junction box installed under your firebox cavity. Always confirm whether your lower compartment has an active 120V receptacle before ordering a replacement kit. Hardwiring is typically unnecessary unless specified by local building codes or custom firebox configurations.
Why does a fireplace blower vibrate or make loud humming noises after installation?
Loose mounting brackets, sheet metal resonance, and direct metal-to-metal contact cause most blower vibration noises. Utilizing high-density rubber isolation feet or heat-resistant foam padding prevents the fireplace body from amplifying the motor’s mechanical hum. Dust accumulation along the cylindrical squirrel-cage impeller blades also throws off rotational balance over time. Regular cleaning of the fan blades before each heating season keeps operations smooth and quiet.
Can you install a universal blower fan kit in a wood-burning fireplace?
It depends entirely on the design of the fireplace firebox. Blower kits require a dedicated lower air channel and upper heat discharge cavity built into factory-built zero-clearance steel units. Solid masonry fireplaces without pre-engineered air circulation chambers cannot accommodate these blowers. For open hearth designs that cannot accept internal blower kits, homeowners often use an external fireplace spark screen to protect room surfaces while relying on radiant heat.
What is the difference between AC blowers and DC motor fireplace fans?
DC motor blowers utilize pulse-width modulation controls to provide quieter operation and precise multi-speed adjustments compared to traditional single or dual-speed AC motors. Standard AC blowers rely on manual rheostat knobs to dial down voltage, which can sometimes produce a faint electrical hum at low RPMs. While DC options like the AC Infinity models deliver low sound levels, standard AC replacement units remain widely popular due to plug-and-play compatibility with existing firebox harnesses.


Write Your Review
No reviews yet. Be the first to share your experience!