A sudden ignition lockout leaves your living room cold right when reliable supplemental heat matters most. Gas fireplace ignition systems depend on precision circuitry to supervise pilot flames and regulate main burner fuel flow. Compatible hpc sit proflame 2 integrated fireplace control modules deliver the exact replacement logic needed to restore continuous pilot spark, stepper motor flame height adjustment, and safety shutoff protocols. Verifying your existing wire harness and matching the board part number prevents unexpected electrical damage to sensitive gas valves. Preparing the hearth enclosure with a protective non-combustible finishing kit during an appliance upgrade ensures the entire assembly remains shielded from excess heat.
Selecting the correct replacement requires matching core operating modes like intermittent pilot ignition (IPI) and continuous pilot ignition (CPI). Most modern IFC boards manage auxiliary circuits for comfort blowers, accent lighting, and split-flow burner valves while accepting 6V battery backup power alongside 120V AC house current. Confirming board versions like 0.584.325, 0.584.305, or 0.584.625 ensures direct compatibility with SIT 880, 885, and 886 series gas valves. Reviewing manufacturer wiring diagrams before purchase avoids incomplete installations and costly component returns.
Pros
- Genuine OEM SIT Proflame 2 part ensures exact circuit specifications and connector compatibility for designated fireplaces
- Flexible pilot programming supports both intermittent (IPI) and continuous (CPI) ignition modes
- Consolidates burner ignition, comfort fan speed, and decorative lighting onto a single control center
- Battery backup connectivity protects home heating capability during winter electrical outages
- Official CSA certification provides verified safety compliance for residential gas hearth installations
Cons
- Not universal across all gas fireplaces; requires strict cross-referencing of model numbers and wiring schematics prior to purchase
- Installation involves sensitive gas-train electronics and line voltage wiring that may require a qualified gas technician
- Supplied strictly as the bare IFC module without wiring harnesses, remote receivers, battery holders, or mounting hardware
The SIT Proflame 2 0.584.625 IFC Control Board from Allparts Equipment & Accessories is an authentic OEM electronic replacement component designed specifically for compatible gas fireplaces and hearth appliances. Gas fireplace platforms utilizing the SIT Proflame 2 system depend on this central control module to orchestrate safety sequencing, fuel valve actuation, and electronic spark generation. This replacement board directly serves homeowners, landlords, and hearth maintenance specialists who need to rectify unlit pilot assemblies, unresponsive ignition cycles, or failing auxiliary relays without purchasing a completely new fireplace.
Regarding operational capability, the 0.584.625 board governs both Intermittent Pilot Ignition (IPI) and Continuous Pilot Ignition (CPI) functions. The IPI setting activates the pilot flame only when heat is demanded, helping reduce standby fuel consumption in milder seasons. Alternatively, switching to CPI mode keeps a continuous pilot active, maintaining a warm flue draft in freezing weather and reducing glass condensation on cold starts. Beyond primary flame rectification and valve management, this board contains dedicated circuitry to control optional hearth accessories, including multi-speed convection blowers, dimmable accent lights, auxiliary outputs, wall switches, and paired remote controls.
Build quality adheres to stringent factory benchmarks, backed by an official CSA certification for safety and electrical reliability in gas hearth applications. The unit is housed in a durable black enclosure measuring 7 inches long, 3.5 inches wide, and 1.65 inches deep, with a total weight of 0.88 pounds. Its standardized terminal layout provides clean, secure seating for factory wire harnesses, valve leads, and spark electrodes. For electrical supply, the board utilizes 120V AC input while accommodating a secondary 6V battery backup pack, ensuring that ignition functions remain fully operational during cold-weather household power interruptions.
Installation requires matching each terminal connector precisely to the corresponding leads on the fireplace wiring harness. Because electronic gas controls interact with fuel solenoids and high-voltage spark circuits, the power and gas supplies must be completely disconnected before removing an old board. Homeowners should take clear photos of their existing wiring and ground connections prior to unplugging any leads. The distributor, Allparts Equipment & Accessories, operates out of Southwest Michigan and provides technical support to assist buyers with identification and setup inquiries.
A critical consideration is that this control board is not a universal module. The 0.584.625 configuration is intended exclusively for hearth appliances engineered around the SIT Proflame 2 architecture, meaning it cannot substitute for older SIT Proflame 1 components, millivolt standing-pilot systems, or third-party ignition modules. Furthermore, the package includes solely the electronic IFC module; auxiliary parts such as remote transmitters, stepper motor wiring, flame sensors, and battery cases are not included and must be transferred from the original installation or purchased separately.
For owners of compatible gas fireplaces experiencing failed ignition sequences, erratic pilot behavior, or blown accessory circuits, the SIT Proflame 2 0.584.625 IFC board represents an exact, reliable restoration path. Its OEM pedigree guarantees original electrical characteristics and full integration with existing Proflame 2 accessories. Always verify your appliance model number, serial tag, and part diagram before purchase, and consider consulting a licensed gas technician to ensure a safe, code-compliant replacement.
Compatibility for the SIT Proflame 2 0.584.625 IFC board depends strictly on your gas appliance model and factory control system. This board is engineered specifically for fireplaces, gas stoves, and fireplace inserts designed around the SIT Proflame 2 platform. It does not interchange with older generation Proflame 1 modules, standard millivolt gas valves, or controls made by manufacturers such as Robertshaw, Dexen, or Honeywell.
Before purchasing, locate the rating plate inside your fireplace control compartment to confirm the exact appliance model number and original part designation. Cross-reference your unit parts manual to ensure that part number 0.584.625 is specified. Because this replacement is sold solely as the individual control board, all preexisting wiring harnesses, flame sensing rods, ignition electrodes, and wireless receiver connections must be undamaged and reusable.
The SIT Proflame 2 0.584.625 board operates primarily on standard 120V AC household electricity, which powers both the ignition electronics and auxiliary connections for compatible accessories like convection fans and accent lamps. In addition to primary line power, the board includes a dedicated connection for a 6V DC battery backup, maintaining pilot flame monitoring and ignition capabilities when household power fails.
Ignition versatility is a primary strength of this module, as it accommodates both Intermittent Pilot Ignition (IPI) and Continuous Pilot Ignition (CPI) configurations. In IPI mode, the pilot sparks and lights only when heat is called for, conserving fuel during shoulder seasons. In CPI mode, a small pilot flame remains lit constantly to maintain flue temperature and ensure reliable ignition during extreme winter conditions.
Gas appliance electronics require dependable performance to ensure unburned gas does not accumulate in the firebox. The SIT Proflame 2 0.584.625 IFC board is CSA certified, indicating that it has been evaluated and tested to meet established North American standards for automatic gas ignition and safety shutoff controls.
During operation, the board continuously supervises the pilot flame via electronic rectification. If the pilot flame fails to prove or extinguishes unexpectedly, the module automatically closes the main gas valve to prevent unburned gas from venting into the home. Due to the critical safety functions of this component, all electrical and gas connections should be verified thoroughly according to the appliance manufacturer instructions upon replacement.
Pros
- Direct replacement match for fireplaces using part number PRO2-IFC-5FFRT-STD
- Restores factory electronic ignition and valve control on 885 series setups
- Connects directly into existing system harnesses without wire splicing
- Addresses electronic lockouts, communication drops, and ignition failures
Cons
- Strict compatibility requires matching the exact part number and 885 series valve
- Installation involves electrical wiring and gas appliance safety precautions
- Does not fix mechanical valve blockages, bad pilot assemblies, or damaged gas lines
The SIT Proflame 2 Fireplace Control Module (model PRO2-IFC-5FFRT-STD) is an electronic integrated fireplace control (IFC) board engineered specifically for gas fireplaces, gas inserts, and stoves equipped with the SIT 885 series gas valve. This replacement part is designed for homeowners, property managers, and repair technicians who need to replace a damaged, non-responsive, or locked-out control board to restore proper hearth functionality.
Functionally, this module serves as the central electronic coordinator for the fireplace burner assembly. It manages pilot spark ignition, monitors the flame-sensing circuit, commands the main valve solenoids, and processes signals from compatible wall switches or remotes. Replacing a failed module allows the fireplace to resume consistent ignition sequencing and stable flame maintenance according to the original manufacturer operating parameters.
The module is built inside a protective casing with dedicated terminal ports designed to accept original Proflame 2 wire harness connectors. The pin layouts are arranged to streamline the replacement process, allowing individual connections for the power supply, valve harness, spark and sensor wires, and diagnostic switches to plug directly into the board without makeshift wiring adjustments.
Setup requires careful verification and basic mechanical familiarity with gas fireplace access panels. Before handling the module, all electrical power and gas supply lines to the appliance must be fully shut off. Installation generally involves photographing the existing wiring layout, unseating the faulty board from its mounting bracket inside the lower fireplace compartment, and transferring each connector to the matching header on the replacement unit. Because gas hearth appliances operate on combustible fuel, hiring a licensed gas professional is recommended if you are unsure about the wiring or testing process.
A critical limitation of this component is that it is not a universal fireplace board. It cannot be adapted to millivolt systems, mechanical pilot setups, or mismatched Proflame generations. Furthermore, installing a new control board will not resolve non-electronic issues such as restricted gas lines, corroded spark electrodes, worn pilot orifices, or defective valve seals.
For gas fireplace owners whose troubleshooting confirms an electronic control board failure on an SIT 885 series valve setup, this module provides an exact-specification replacement. Cross-referencing the part number PRO2-IFC-5FFRT-STD on your existing control board before ordering is the most effective way to ensure a seamless repair.
Compatibility for gas fireplace control modules is determined by exact part numbers rather than appliance brand names alone. This module is configured specifically for systems requiring part number PRO2-IFC-5FFRT-STD and running an SIT 885 series gas valve.
Before purchasing, open the lower access panel or louvers on your gas fireplace and locate the existing white identification sticker on the control module. Confirm that the model number matches PRO2-IFC-5FFRT-STD, as boards with different suffix designations may have differing programming, stepper motor support, or remote receiver pairing capabilities.
Servicing electronic components in a gas appliance requires strict adherence to home safety procedures. Always turn off the dedicated circuit breaker or unplug the appliance power cord, remove backup batteries, and shut off the manual gas supply valve before touching the control board.
Take clear reference photos of all wiring harnesses and diagnostic leads before disconnecting the original module. If you are not completely comfortable working around electronic hearth circuits and gas lines, consult a qualified gas hearth technician to handle testing and installation in accordance with local building codes.
Pros
- Restores core ignition control alongside auxiliary features like flame height, splitflow valves, and comfort fans.
- Dual IPI and CPI ignition support allows flexibility between seasonal gas conservation and reliable cold-draft startup.
- Broad compatibility with popular gas hearth brands utilizing SIT Series 880, 885, and 886 valve setups.
- Includes access to USA-based technical support and a 1-year product exchange warranty.
Cons
- Non-returnable once opened from sealed packaging, with an exchange-only policy on installed electrical components.
- Requires careful physical verification of the existing part number, wire harness configuration, and gas valve model before purchase.
- Installation involves sensitive electrical and gas appliance wiring that may require a qualified hearth technician.
The SIT Proflame 2 0.584.325 Integrated Fireplace Control (IFC) board is a specialized electronic control module designed to manage ignition sequencing and pilot supervision in modern gas hearth appliances. Distributed by Allparts Equipment & Accessories, this control unit is built for homeowners, landlords, and service technicians seeking an OEM-grade replacement for a malfunctioning or dead electronic ignition board. If your gas fireplace, insert, or freestanding stove relies on the SIT Proflame 2 platform, this circuit board acts as the central hub governing primary combustion and automated convenience features.
Functionally, model 0.584.325 manages main burner operation with built-in safety monitoring, featuring a 5-second flame failure response time (FFRT5) to shut down gas flow if a pilot flame is not detected. It accommodates both Intermittent Pilot Ignition (IPI), which conserves gas by sparking only on demand, and Continuous Pilot Ignition (CPI), which keeps a small pilot lit to reduce condensation and maintain chimney draft in freezing weather. In addition to basic ignition, the board is configured to command multi-stage functions including a stepper motor for modulating flame height, a splitflow valve, dimmable accent lighting, comfort blower fans, burner fans, and digital auxiliary inputs.
Constructed in a compact black protective housing measuring 6.25 by 3.5 by 2 inches and weighing 0.8 pounds, the module is engineered to fit within tight fireplace control cavities. It is specifically calibrated to communicate with standard pilot assemblies alongside SIT Controls Series 880, 885, and 886 automatic gas valves. Every unit undergoes factory quality checks prior to sealing to prevent defective components from interrupting a repair or seasonal maintenance overhaul.
Installation is straightforward for those familiar with low-voltage hearth wiring, requiring direct transfer of terminal blocks, wire harnesses, and ground connections from the old board. The manufacturer indicates broad fit across various gas fireplaces, pedestal stoves, and gas log systems from established brands including Lennox, Travis Industries, Empire Comfort Systems, Hearth and Home Technologies (HHT), and Napoleon. Because this unit controls both gas valve actuation and electrical relays, referring to the appliance manual and adhering to safe electrical disconnect procedures is necessary during replacement.
Prospective buyers must note key warranty and return restrictions before ordering. Electrical parts carry strict limitations: this board is non-returnable once removed from its sealed packaging, and installed components qualify for exchange only under the 1-year warranty provided by Allparts Equipment. Before purchase, you must inspect your existing control module to confirm that part number 0.584.325 matches exactly and that your appliance uses a compatible SIT Series 880, 885, or 886 gas valve.
For owners troubleshooting unresponsive ignition sequences, absent pilot sparking, or lost auxiliary fan and light control on an established SIT Proflame 2 setup, this replacement board offers a dependable solution. Supported by USA-based distribution and technical assistance, it successfully restores fireplace operation without the expense of overhauling the entire burner and valve assembly.
Compatibility requires verifying your existing board part number and gas valve configuration before purchasing. This IFC module is model number 0.584.325 within the SIT Proflame 2 electronic ignition family.
It is designed to control pilot assemblies and integrate directly with SIT Controls Series 880, 885, and 886 automatic gas valves. It is commonly used across select gas fireplaces, gas log sets, and pedestal stoves produced by Lennox, Travis Industries, Empire, Hearth and Home Technologies (HHT), and Napoleon.
Do not attempt to replace older Proflame 1 systems or mechanical millivolt systems with this board, as wiring pinouts, voltage requirements, and remote receiver protocols are incompatible.
Allparts Equipment & Accessories provides a 1-year exchange warranty on this replacement board. Coverage applies strictly as an exchange for a replacement unit and is managed directly by Allparts Equipment.
Buyers should take note of strict return conditions: the product is completely non-returnable if removed from its original sealed packaging. Installed electrical components are strictly exchange-only, with no standard refunds permitted once connected.
USA-based distribution and technical support are available to help answer product questions, verify details, and assist with exchange inquiries under the policy terms.
Pros
- Exact part number match (0.584.665) eliminates guesswork for compatible SIT systems
- Targeted electronic board replacement saves the substantial expense of replacing the whole fireplace
- Compact black casing fits neatly within standard lower control compartments
- Restores essential ignition control and communication between hearth components
Cons
- Requires buyers to inspect and match the exact part number on their existing board prior to purchase
- Does not include wiring harnesses, mounting hardware, or a remote control
- Gas appliance electronic servicing often requires installation by a qualified hearth technician
The All Pro Fireplace SIT Proflame 2 Control Module 0.584.665 is a specialized replacement electronic control board engineered for gas fireplaces, fireplace inserts, and freestanding gas stoves built on the SIT Proflame 2 operating system. When an existing gas fireplace experiences ignition failure, intermittent shutoffs, or a breakdown in communication with controls, a malfunctioning module is often the source. This replacement part is tailored for homeowners, property managers, and service technicians seeking an exact-specification component to restore normal hearth function.
In standard gas fireplace operation, the control module acts as the central electronic processor. It manages the ignition sequence, supervises safety functions, regulates the gas valve, and communicates with the remote receiver or wall switch. Because the SIT Proflame 2 system is deployed across numerous major fireplace brands in the United States, having the specific 0.584.665 revision ensures that command signals and component timings align with the original equipment manufacturer design.
The module is housed in a durable black protective casing designed to withstand the ambient temperatures and dust conditions typical of fireplace control compartments. Its form factor allows it to seat securely in the lower access area beneath the firebox. The terminal banks and plug connections are molded to standard SIT Proflame 2 dimensions, accommodating existing factory wiring harnesses without requiring custom wire splicing or modifications.
Installation requires careful verification and standard electrical safety precautions. Before ordering, buyers must visually inspect their existing module to ensure the part number 0.584.665 is clearly marked. During replacement, power to the fireplace must be shut off at the breaker, and the gas supply should be turned off. Photographing or labeling each wiring plug prior to disconnection makes reassembly straightforward. Because the module directly governs gas valve operation and flame safety, having a qualified gas appliance professional carry out the installation is strongly advised.
The main limitation of this offering is the lack of supplementary hardware or application documentation. It does not come with replacement wiring looms, mounting brackets, or an appliance-specific guide, as it is strictly sold as a component part. However, for anyone who has diagnosed a faulty 0.584.665 module, this All Pro Fireplace replacement delivers an exact-fit component that can get an existing gas fireplace functioning dependably again.
Verifying the existing part number on your fireplace control module is essential before purchasing this unit. Look at the white label on your current module inside the lower control cavity to confirm it reads 0.584.665. While SIT Proflame 2 modules share similar exterior designs across different iterations, boards with different model numbers often feature distinct programming, stepper motor support, or terminal layouts that are not cross-compatible.
Many fireplace manufacturers utilize SIT Proflame components under their own proprietary brand part numbers. Cross-referencing your fireplace owner manual or manufacturer parts list against the 0.584.665 SIT designation will ensure this replacement matches your system requirements.
Working with gas fireplace electronics requires strict adherence to safety precautions. Always disconnect the main electrical supply and shut off the gas supply line before inspecting or replacing any internal control board. Labeling or photographing each wire harness prior to removal helps avoid incorrect wiring when seating connectors into the new module.
Because the control module directly interfaces with the gas valve and electronic ignition system, hiring a certified gas technician or licensed hearth professional is recommended to verify correct operation and prevent safety hazards.
Pros
- Controls ignition, pilot supervision, stepper motor flame height, and auxiliary fan/light functions from a single board
- Directly compatible with widespread SIT Controls Series 880, 885, and 886 automatic gas valves
- Rapid 5-second flame failure response time provides reliable ignition sequence monitoring
- Offers flexible operation with both energy-saving IPI and cold-climate CPI ignition modes
Cons
- Strict return policy applies: non-returnable once removed from sealed packaging or if installed, allowing exchange only
- Restricted to specific SIT Proflame 2 electronic ignition setups and will not fit traditional standing millivolt systems
- Requires careful verification of existing wire harness configurations and part numbers before ordering
The SIT Proflame 2 model 0.584.305 Integrated Fireplace Control (IFC) board serves as the primary electronic brain for modern gas hearth appliances. Manufactured by SIT Controls and distributed by Allparts Equipment, this control module manages automatic ignition sequences, continuous pilot supervision, and key accessory operations. It is designed specifically for homeowners, landlords, and hearth maintenance buyers who need to replace a damaged or non-responsive control module in an existing gas fireplace, gas log set, or freestanding pedestal stove.
Operational versatility is a core strength of the Proflame 2 platform. This module allows users to toggle between Intermittent Pilot Ignition (IPI), which saves fuel by igniting the pilot only on call for heat, and Continuous Pilot Ignition (CPI), which keeps the pilot lit to prevent draft issues during harsh North American winters. The board features a 5-second Flame Failure Response Time (FFRT5), ensuring the system quickly and safely recognizes flame status during startup and normal operation.
Beyond basic ignition, the 0.584.305 board is engineered to manage a comprehensive suite of hearth accessories. It directly commands SIT Controls Series 880, 885, and 886 automatic gas valves while offering onboard management for a stepper motor flame height regulator, splitflow valve, comfort fan, burner fan, dimmable lighting, and digital input/output circuits. This wide feature set makes it suitable for fully appointed direct-vent or vented gas units that combine ambiance lighting and variable heat modulation.
Physically, the control module measures 6.25 inches long by 3.5 inches wide by 2 inches deep, weighing in at just 0.8 pounds. The compact, black protective enclosure is designed to fit inside the standard lower louvers or control cavities of compatible appliances. Installation involves matching multi-pin harness connectors to the labeled board headers, linking the pilot assembly, gas valve, power source, and accessory wiring without needing custom wire modifications.
Buyers must note critical purchasing restrictions before ordering this replacement part. Because this is a sensitive electronic control board, Allparts Equipment maintains an exchange-only policy for defective units, and the module is strictly non-returnable once opened from its sealed packaging or installed in a fireplace. Verifying that the existing fireplace uses the Proflame 2 system and carries the 0.584.305 or 584.305 part number is essential prior to purchase.
For owners of fireplaces from major manufacturers such as Napoleon, Empire, Lennox, Travis Industries, or Hearth and Home Technologies (HHT) running SIT 880-series gas valves, the SIT 0.584.305 IFC board provides a dependable, direct-fit solution. It restores full automatic functionality to temperamental or non-functioning gas fireplaces while preserving all factory-designed auxiliary fan, light, and flame-adjustment features.
Compatibility for the SIT 0.584.305 IFC board depends on the specific electronic ignition system installed in your gas hearth appliance. This board is engineered exclusively for appliances utilizing the SIT Proflame 2 platform and will not work with older Proflame 1 systems, standard standing millivolt pilot assemblies, or non-SIT electronic modules.
The module directly controls automatic gas valves in the SIT Controls Series 880, 885, and 886 families. It is commonly specified as a replacement component across gas fireplaces, fireplace inserts, gas log sets, and pedestal stoves produced by brands including Lennox, Travis Industries, Empire Comfort Systems, Hearth and Home Technologies (HHT), and Napoleon.
Always verify the part number printed on your existing module before ordering. Look for 0.584.305 or 584.305 on the board casing, and confirm that your wiring harness matches the multi-pin connector layout for your valve, sparker, flame sensor, and auxiliary equipment.
This SIT Proflame 2 IFC board includes a 1-year exchange warranty provided through Allparts Equipment. The warranty covers manufacturing defects and provides an exchange replacement should the component fail under normal operating conditions within the first year.
Buyers must be aware of strict return conditions associated with electrical hearth components. The item is strictly non-returnable if removed from its sealed factory packaging, and installed electrical components cannot be returned for a refund. Exchanges are permitted only in the event of documented manufacturer defects.
Product distribution and technical support are based in the United States, giving buyers access to domestic support resources to answer questions regarding product fit, warranty processing, and initial component verification.
Pros
- Directly replaces discontinued or failed SIT Proflame 2 module part number 0.584.306
- Maintains full integration with existing compatible SIT Proflame 2 wiring harnesses and components
- Standard black composite housing matches OEM mounting dimensions in control trays
- Cost-effective solution compared to full fireplace system replacements
Cons
- Requires strict verification of existing part numbers and wiring harness configurations before purchase
- Product listing includes minimal technical documentation and wiring schematics
- Gas hearth electronic components strongly favor installation by a qualified service professional
The All Pro Fireplace SIT Proflame 2 Control Module 0.584.606 is a specialized electronic replacement component designed for gas fireplaces and fireplace inserts running the SIT Proflame 2 platform. Serving as a direct replacement for part number 0.584.306, this unit is engineered for homeowners, property managers, and hearth technicians who need to resolve erratic ignition, unresponsiveness, or module-related failure codes. Rather than undertaking an extensive and costly fireplace overhaul, installing the correct replacement board allows you to restore core electronic functions with minimal disruption to your living space.
Functionally, the Proflame 2 control module serves as the command center for compatible gas hearth appliances. It coordinates input signals from remote controls, wall switches, and sensors to govern ignition sequencing and burner management. When an existing control module suffers electrical failure, heat stress, or component degradation, the fireplace can fail to light, drop connections to remote transmitters, or shut down unexpectedly. Replacing the damaged unit with this dedicated 0.584.606 module helps reinstate factory-intended control behavior across your gas fireplace system.
In terms of build quality, the module features a durable, protective black composite housing designed to resist standard under-firebox temperature exposure. The exterior features standardized multi-pin connector ports configured for compatible SIT wiring harnesses, ignition leads, and power connections. The physical dimensions and terminal layout align with original equipment specifications, allowing it to sit neatly within existing control module brackets beneath the firebox.
Installation requires access to the lower control compartment of the gas fireplace. Servicing involves disconnecting electrical power, shutting off the gas supply, unplugging the existing wiring harnesses from the old 0.584.306 board, and reseating them into the corresponding ports on the 0.584.606 unit. Because work in this compartment touches gas valve controls and high-voltage ignition leads, working with a qualified gas appliance professional is strongly recommended to ensure proper terminal seating and system safety.
A critical consideration is that this module is not a universal replacement for all gas fireplaces or all SIT systems. The SIT Proflame family contains several distinct generations and sub-models that utilize different pin assignments, voltage requirements, and communication protocols. Buyers must verify the white identification sticker on their existing module to ensure part number 0.584.306 or 0.584.606 is clearly stated. Assuming compatibility based solely on visual appearance can lead to improper operation or potential electrical damage.
For owners of compatible gas fireplaces experiencing confirmed module failure, the All Pro Fireplace SIT Proflame 2 Control Module 0.584.606 offers a precise, reliable path to getting your hearth running again. As long as you confirm part number compatibility with your appliance manual and adhere to safe installation standards, this replacement module delivers dependable performance and solid value.
Before ordering this module, locate the original control board inside your gas fireplace access area and confirm the manufacturer part number. This board is engineered specifically to replace SIT Proflame 2 module part number 0.584.606 and supersedes older part number 0.584.306.
Gas hearth manufacturers across North America utilize SIT control systems under various proprietary brand part numbers. Always cross-reference the numbers printed directly on your board's label rather than relying solely on your fireplace brand name or general model number.
This module is not compatible with first-generation SIT Proflame systems, standing pilot millivolt systems, or control platforms from other manufacturers. Ensure your harness connectors, remote receiver configuration, and valve assembly match the SIT Proflame 2 specification prior to installation.
Pros
- Direct OEM-spec replacement for SIT 0.584.605 boards operating 880, 885, and 886 series gas valves
- Provides both IPI and CPI pilot modes alongside burner fan, comfort blower, and stepper motor control
- Rapid 5-second flame failure response time ensures swift pilot supervision
- Broad compatibility across major hearth brands utilizing the Proflame 2 platform
Cons
- Strict exchange-only policy with no returns permitted once the sealed packaging is opened or the part is installed
- Requires exact matching of terminal connections and model-specific configurations before installation
- Not compatible with older Proflame 1 systems, millivolt standing-pilot systems, or non-SIT gas valves
The SIT Proflame 2 Series 0.584.605 Integrated Fireplace Control (IFC) board is an electronic replacement module engineered for modern gas fireplaces, gas log sets, and freestanding gas pedestal stoves. This component is specifically designed for homeowners, property managers, and maintenance personnel who need to restore factory ignition functionality in appliances built with SIT Controls hardware. It connects directly to the pilot assembly and operates automatic gas valves in the SIT 880, 885, and 886 series lines.
Functionally, the 0.584.605 module commands both main burner cycling and automated pilot supervision. Users have the flexibility of selecting Intermittent Pilot Ignition (IPI), which conserves fuel by sparking the pilot only on a call for heat, or Continuous Pilot Ignition (CPI), which maintains a steady pilot to prevent draft loss and condensation during freezing weather. Built with a 5-second flame failure response time (FFRT5), the module actively monitors the flame signal and interrupts gas flow quickly if the pilot fails to light or goes out unexpectedly.
Beyond foundational ignition, the circuit architecture on the 0.584.605 board accommodates multi-feature hearth appliances. The board includes dedicated connections to manage a stepper motor for modulating flame height, a split-flow valve for multi-stage burners, comfort circulation blowers, burner fans, digital inputs/outputs, and dimmable interior accent lighting. This allows compatible gas fireplaces to maintain their full feature set rather than just basic on-off functionality.
Physical installation requires access to the appliance lower controls compartment. Measuring 6.25 x 3.5 x 2 inches and weighing 0.8 pounds, the black-cased module matches standard mounting footprints for Proflame 2 control bays. Wiring involves transferring multi-pin harnesses from the existing module to the labeled headers on the replacement board. Because the unit controls line-voltage blower circuits and millivolt gas solenoids, power must be disconnected and proper wiring alignment verified before powering the appliance.
Realistic limitations center on strict model compatibility and seller policies. This control board is not a universal module and cannot replace older Proflame 1 hardware, standing-pilot millivolt valves, or competitor valves from Dexen or Robertshaw. Additionally, Allparts Equipment specifies an exchange-only policy with no returns accepted on installed electrical parts or items removed from sealed packaging. Hearth owners must check the part number stamped on their existing board before purchasing.
For owners of Lennox, Napoleon, Empire, Travis Industries, or Hearth & Home Technologies (HHT) gas fireplaces experiencing intermittent ignition lockouts or board failure, this 0.584.605 IFC board provides an authentic, pre-tested replacement. Backed by USA-based technical support and a 1-year exchange warranty, it offers a reliable pathway to restore safe and responsive fireplace operation.
The SIT 0.584.605 Proflame 2 IFC board is engineered specifically for gas-fueled hearth appliances equipped with SIT Controls electronic ignition systems. It directly interfaces with SIT 880, 885, and 886 automatic gas control valves.
The module serves as a direct replacement across several major fireplace brands that utilize the Proflame 2 platform, including Lennox, Travis Industries, Empire Comfort Systems, Hearth & Home Technologies (HHT), and Napoleon. It supports appliances running either IPI or CPI configurations.
This control board is not universally compatible. It will not operate with older SIT Proflame 1 series systems, standing pilot millivolt assemblies, or gas valves made by other manufacturers. Buyers should physically confirm the 0.584.605 designation on their existing module label prior to replacement.
This SIT Proflame 2 replacement board is distributed by Allparts Equipment and includes a 1-year exchange warranty against manufacturing defects.
Due to the sensitive nature of hearth electrical components, strict terms apply: the module is non-returnable if removed from its sealed packaging, and no returns are accepted on installed electrical components. Covered warranty claims are handled strictly on an exchange basis.
Allparts Equipment provides USA-based technical support to assist buyers with product verification and technical inquiries regarding the 0.584.605 control module.
Pros
- Direct drop-in replacement for SIT 0.584.302 and updated 0.584.602 control units
- Standard 9-pin quick-release connector simplifies plug-in wiring on compatible harnesses
- Integrated safety controls feature real-time flame sensing and automatic shutoff
- Compatible with multiple major gas fireplace brands using Proflame 1 or Green Smart 1 systems
Cons
- Strict return policy does not allow returns once the sealed packaging is opened or the module is installed
- Only works with compatible SIT Proflame 1 IPI systems and will not replace standing pilot or unrelated digital boards
- Requires careful part-number and wiring verification before purchase to ensure harness compatibility
The GIZMO TECH PARTS SIT 0.584.302 (new version 0.584.602) Proflame 1 IPI DFC Control Module is a specialized replacement electronic ignition board designed for gas fireplaces, inserts, stoves, and gas log sets. It primarily serves homeowners, property managers, and repair technicians looking to resolve ignition failures, spark sequencing errors, or intermittent pilot issues on gas hearth systems that use the SIT Proflame 1 platform.
Functionally, this direct fuel control (DFC) module manages intermittent pilot ignition (IPI) and flame rectification. Built-in microprocessor logic regulates ignition timing while integrated real-time flame monitoring continuously senses pilot and burner status. If the module detects flame loss or failure to ignite within safety parameters, it initiates an automatic emergency shutoff to prevent unburned gas accumulation.
The module is constructed inside a durable black housing measuring 4.25 inches long, 3 inches wide, and 1.5 inches thick. Its primary interface is an industry-standard 9-pin connector designed to mate directly with pre-existing quick-release wiring harnesses. The internal board and terminal connections are built for the thermal conditions typical of lower fireplace control cavities, accommodating Proflame 1, DFC, and Green Smart 1 platform architectures.
Physical replacement involves accessing the lower fireplace component cavity, disconnecting power or batteries, and swapping the existing 9-pin module. The manufacturer lists broad compatibility across more than 30 major hearth brands, including Lennox, Travis Industries, Empire Comfort Systems, and Napoleon. Because gas fireplace wiring setups can vary by model year and remote configuration, verifying the part number on your existing board (0.584.302 or 0.584.602) before ordering is essential for proper harness matching.
A key limitation is the strict return restriction: once the sealed packaging is opened or the unit is installed, electrical components cannot be returned for a refund due to manufacturer quality control rules, though unopened units carry a 1-year exchange warranty. Additionally, this module will not function on millivolt standing-pilot systems or newer incompatible digital platforms. Homeowners uncomfortable diagnosing low-voltage DC controls or testing gas appliance safeties should consult a qualified gas technician.
For gas fireplace owners facing persistent electronic ignition faults on a verified SIT Proflame 1 or Green Smart 1 setup, this GIZMO TECH replacement module provides an exact form-fit replacement to restore reliable hearth heating without replacing the entire burner assembly.
This control unit is designed as a direct replacement for SIT module part numbers 0.584.302 and the updated version 0.584.602. It utilizes a 9-pin quick-release connector common to Proflame 1 series DFC systems.
The manufacturer lists compatibility across over 30 major fireplace brands, including Lennox, Travis Industries, Empire Comfort Systems, and Napoleon. It is also compatible with systems designated as Green Smart 1 and Proflame 1 IPI setups.
Always verify the exact part number printed on your existing control board and confirm that your fireplace uses an electronic intermittent pilot system with a matching 9-pin harness before ordering.
The module incorporates active microprocessor monitoring designed to safeguard gas fireplace operation. It continuously analyzes flame presence via flame rectification during start-up and normal burn cycles.
If the pilot fails to establish a flame or if the flame extinguishes unexpectedly during operation, the module triggers an automatic emergency shutoff to close the gas flow, helping prevent hazardous fuel accumulation.
The manufacturer provides a 1-year exchange warranty covering unopened units with verified manufacturing defects.
Due to industry-standard electrical component safety and quality control standards, units cannot be returned for refund once the factory sealed packaging has been opened or the module has been connected to a fireplace.
Frequently Asked Questions
Can a Proflame 2 IFC board replace an older Proflame 1 DFC module?
No, Proflame 2 IFC boards cannot directly swap into Proflame 1 DFC configurations without rewiring. Proflame 1 systems, such as the 0.584.302 module, use dedicated 9-pin quick-release harnesses and separate receiver hardware. Proflame 2 modules integrate auxiliary fans, lights, and valve motors onto one centralized board. Always verify your existing part label before purchasing a replacement board.
What is the difference between IPI and CPI modes on Hpc Sit Proflame 2 Integrated Fireplace Control Modules?
The primary difference involves how the pilot flame operates between heating cycles. Intermittent Pilot Ignition (IPI) ignites the pilot only upon a heat call to conserve gas. Continuous Pilot Ignition (CPI) maintains a constant pilot to reduce glass condensation and preserve flue draft in freezing weather. Compatible hpc sit proflame 2 integrated fireplace control modules support toggling between both modes depending on seasonal conditions.
Does an IFC replacement board fit all SIT gas valves?
Usually, provided your fireplace utilizes an automatic 880, 885, or 886 series valve. Replacement boards like 0.584.325 and 0.584.605 connect directly to electronic gas valves with compatible stepper motors. They will not operate manual millivolt valves or incompatible third-party gas trains. Check your valve model number and appliance manual to ensure proper electrical matching.
Why does a newly installed IFC board shut down after 5 seconds?
A 5-second shutdown indicates that the flame failure response time (FFRT5) sensor failed to detect pilot rectification. The board immediately shuts the gas valve to prevent unburned fuel buildup. Clean any soot off the flame sensor and verify ground wire contacts. Ensuring an unobstructed gas line with an approved corrugated gas supply coupling also prevents low-pressure flame dropouts.
Can these integrated control boards operate during power outages in 2026?
Yes, provided you connect a compatible 6V battery backup harness. Units like the 0.584.625 board run on standard 120V AC household power but utilize 6V battery packs to keep electronic ignition active during winter power failures. Auxiliary features like blowers or 120V accent lights may stay inactive without AC power, but primary burner operation continues safely.


Write Your Review
No reviews yet. Be the first to share your experience!