Ages 18-24? Explore Prime for Young Adults and see if you are eligible

Planning a clean-face hearth upgrade requires matching the venting configuration, gas line plumbing, and framing clearances perfectly to avoid costly renovation mistakes. Many homeowners exploring high-efficiency zone heating turn to the Napoleon 35 Ascent X 70 Direct Vent Gas Fireplace lineup because direct-vent systems pull outdoor combustion air while expelling exhaust safely through a sealed wall or roof penetration. Navigating between full fireplace units like the Napoleon Ascent series and crucial maintenance components like side-mount SIT pilot assemblies often creates confusion during installation or seasonal servicing. Pairing the proper firebox with accessories like a heat deflector hood installation can also help shield sensitive mantels and wall-mounted electronics from rising thermal wash.

Verifying your fuel source before ordering remains non-negotiable since natural gas and liquid propane setups rely on different burner orifices and pilot assemblies. A failing thermopile or worn thermocouple inside a sealed direct-vent firebox can prevent the main burner from igniting, leaving living spaces without dependable heat during freezing winter nights. Reviewing manufacturer framing specifications, electronic ignition backup capabilities, and exact OEM part numbers ensures smooth installation and trouble-free seasonal warmth. Taking time to inspect direct-vent gas fireplace specifications saves significant labor costs and keeps your hearth running safely all year round.

1
Best Seller

Napoleon WS-100-38 Natural Gas Pilot Assembly

Napoleon
9.9 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The Napoleon WS-100-38 Natural Gas Pilot Assembly is an OEM direct-fit replacement designed for side-mount installation in direct-vent gas fireplaces. It is best suited for homeowners and technicians looking to restore reliable natural gas pilot ignition using factory-spec 24-inch component leads.
Pros & Cons

Pros

  • Direct-fit OEM replacement engineered under Napoleon part number WS-100-38
  • Integrated 24-inch lead components allow easy routing to the gas valve manifold
  • Factory-configured specifically for direct-vent natural gas applications
  • Side-mount bracket matches original equipment mounting locations

Cons

  • Configured strictly for natural gas and cannot be used in propane systems without proper conversion
  • Requires verifying your specific Napoleon direct-vent fireplace model manual before purchase
  • Gas appliance servicing typically requires professional handling for leak checking and safe operation
Detailed Review

The Napoleon WS-100-38 Natural Gas Pilot Assembly is an OEM-specified replacement component designed for direct-vent gas fireplaces. Manufactured by Allparts Equipment to meet factory specifications, this pilot assembly is intended for homeowners, landlords, or maintenance technicians working to repair an existing direct-vent Napoleon fireplace that suffers from pilot lighting issues, loose connections, or worn ignition components.

This pilot assembly functions as the critical ignition and flame-sensing source within a natural gas fireplace system. Because it is specifically built for direct-vent natural gas applications, the orifice and burner hood are calibrated for standard natural gas delivery, avoiding the soot buildup or delayed ignition that can happen with mismatched fuel components. It features a side-mount design that positions the pilot flame properly against the main burner for smooth ignition cycles.

Construction details reflect durable black-finished metal housing and components sized to handle the continuous heat of an active direct-vent firebox. The overall package dimensions measure 8 x 2 x 5 inches, and the assembly is fitted with 24-inch components, providing ample reach for routing thermopile, thermocouple, or spark wiring down through the firebox base to the lower control valve area.

Installation requires access to the fireplace burner tray and gas valve manifold. The integrated side bracket aligns with existing screw locations on compatible direct-vent fireboxes, while the 24-inch lead lengths eliminate tension on the wiring during positioning. Working on fuel lines requires turning off the gas supply and ensuring leak-free connections according to the fireplace manufacturer's maintenance procedures.

A key consideration is fuel compatibility. This unit is strictly engineered for natural gas direct-vent fireplaces and is not compatible with liquid propane setups without explicit factory conversion kits. Additionally, because Napoleon produces diverse fireplace series with distinct mounting brackets and lead lengths, buyers should cross-reference part number WS-100-38 with their appliance's original user manual or parts list prior to purchase.

For homeowners maintaining an older or malfunctioning direct-vent Napoleon natural gas fireplace, the WS-100-38 assembly provides a dependable direct-fit solution. Its OEM specifications and pre-sized 24-inch components eliminate guesswork, making it a solid replacement choice to restore reliable seasonal heating and ambiance.

Replacement Compatibility

Confirming part numbers is essential before ordering gas fireplace hardware. The WS-100-38 assembly is designed specifically as an OEM replacement for compatible Napoleon direct-vent gas fireplaces. Check your fireplace model rating plate or owner manual to verify that WS-100-38 is listed under the replacement parts diagram.

This pilot assembly features a side-mounting bracket and 24-inch components. If your direct-vent fireplace uses a top-mount pilot bracket or requires longer leads to reach the gas valve, verify fitment against the appliance manufacturer specifications before starting installation.

Fuel & Venting

This pilot assembly is configured exclusively for direct-vent fireplaces fueled by natural gas. Natural gas and liquid propane operate at different manifold pressures and require different orifice sizes, meaning this pilot should never be installed on a propane system without certified conversion equipment.

Because direct-vent fireplaces utilize a sealed combustion chamber, proper pilot alignment and tight sealing around wiring penetrations are critical for maintaining draft integrity and safe combustion.

2
Editor's Pick

American Hearth Boulevard 72-Inch Direct Vent

AMERICAN HEARTH
9.9 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The American Hearth Boulevard 72-inch direct-vent natural gas fireplace delivers an expansive contemporary flame presentation with multi-function remote burner control and programmable multicolor under-burner lighting. It is best suited for homeowners and custom remodelers planning a large-scale architectural feature wall who are prepared to purchase the required interior liner and decorative crushed glass separately.
Pros & Cons

Pros

  • Generous 72-inch linear display provides true architectural scale for modern open-concept spaces
  • Included multi-function remote control streamlines burner management and optional blower operation
  • Programmable under-burner multicolor LED illumination can be run independently for accent lighting
  • Specific framing dimensions (61 5/8 H x 91 5/8 W x 21 1/2 D) provide clear planning guidelines for builders

Cons

  • Requires separate purchases of a required interior liner (DVP72LKR or DVP72LPZ) and 8 boxes of crushed glass to complete installation
  • Large framing footprint requires over 91 inches of wall width and 21 1/2 inches of depth, making it unsuitable for compact rooms
  • BTU heat ratings and fuel conversion details are not provided in the primary specifications and must be verified in the manufacturer manual
Detailed Review

The American Hearth Boulevard 72-inch direct-vent linear fireplace is a large-format natural gas hearth designed for grand accent walls, contemporary living rooms, and high-end remodeling projects. This built-in appliance suits homeowners, architects, and general contractors seeking an expansive horizontal fire display with clean lines. Because it requires a substantial recessed cavity and dedicated direct venting through an exterior wall or roof, it is engineered specifically for permanent built-in architectural construction rather than casual retrofits.

Flame and ambiance management center on a multi-function remote control paired with an integrated under-burner lighting system. The handheld remote regulates the natural gas burner and is pre-configured to control an optional circulating blower if added. Beneath the burner floor, programmable multicolor LED lighting provides base illumination that is operated via an included wall-mount control. This allows homeowners to create customized color accents across the bottom of the firebox, providing visual interest even when the gas burner is switched off.

Structural planning demands careful attention to framing depth and width. The manufacturer lists framing dimensions of 61 5/8 inches high by 91 5/8 inches wide by 21 1/2 inches deep. Direct-vent technology uses a sealed combustion chamber that draws outside air for combustion while venting exhaust outside, protecting indoor air quality. Because heat clearance and chase venting are critical on a 72-inch gas appliance, contractors should review the manufacturer installation manual prior to framing the enclosure or specifying wall finishes.

Finishing the Boulevard 72 requires purchasing specific components that do not ship in the base carton. The unit requires an internal reflective liner to complete the firebox, with the manufacturer specifying either liner model DVP72LKR or DVP72LPZ. In addition, the floor of the unit requires eight individual boxes of decorative crushed glass to properly cover the burner area. Buyers can further personalize the display with optional accessories like a driftwood log set or alternative firebox media.

Prospective buyers must account for the required add-on costs and verify technical specifications that are omitted from basic product listings. Exact BTU heating output, room heating capacity, electrical requirements for the LED lighting, and liquid propane conversion options are not detailed in the raw product data and must be confirmed in the official American Hearth documentation before ordering. The depth requirement of 21 1/2 inches also precludes shallow-wall installations without building out a dedicated bump-out chase.

The American Hearth Boulevard 72 is a compelling choice for homeowners seeking a statement-making linear gas fireplace with integrated LED lighting and flexible remote controls. As long as the framing dimensions, liner requirements, decorative glass quantities, and professional gas installation needs are planned into the project budget from the outset, it delivers an impressive architectural hearth presentation.

Framing & Required Accessories

Framing this fireplace requires a dedicated wall cavity measuring 61 5/8 inches in height, 91 5/8 inches in width, and 21 1/2 inches in depth. Always verify framing clearances, non-combustible material zones, and header placements against the official manufacturer installation manual before rough framing begins.

This fireplace cannot be operated as an open chassis and requires specific accessories sold separately to be completed. Buyers must order an approved liner kit, designated as either model DVP72LKR or DVP72LPZ, to finish the interior firebox walls.

The burner floor requires eight boxes of decorative crushed glass media to provide proper burner coverage and disperse the programmable LED lighting. Additional media, such as the compatible driftwood log set or accent glass, may be layered on top according to manufacturer guidelines.

Remote & Lighting Controls

The Boulevard 72 includes a multi-function handheld remote control that manages primary burner ignition and flame adjustment. The remote system is also wired to support an optional circulating blower kit if added during installation.

Illumination beneath the burner pan is powered by a programmable multicolor LED lighting array. This system is operated through an included wall-mount control panel, allowing users to cycle through colors and lighting routines to complement room decor.

The LED lighting system operates independently of the main gas burner. This feature allows homeowners to enjoy ambient accent lighting throughout warmer months without activating the natural gas flame.

3
Limited Time

WS-100-38 Direct Vent Natural Gas Pilot Assembly

Generic
9.9 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
This WS-100-38 natural gas pilot assembly is an aftermarket SIT side-mount replacement designed for compatible direct-vent gas fireplaces and Napoleon stoves. It includes the pilot tubing, spark electrode, thermocouple, and thermopile, making it a practical complete kit for homeowners and repair technicians troubleshooting pilot outage or ignition failure.
Pros & Cons

Pros

  • Includes every core ignition component: pilot hood, gas line, electrode, thermocouple, and thermopile
  • Matches an extensive list of direct-vent replacement part numbers across Napoleon and SIT systems
  • Cost-effective aftermarket alternative to purchasing individual flame sensors separately
  • Dedicated natural gas orifice setup ensures appropriate pilot flame pattern when installed in compatible appliances

Cons

  • Configured strictly for natural gas and cannot be used with propane systems without verified conversion components
  • As an unbranded replacement part, exact bracket alignment and connector threads must be matched against your existing unit prior to ordering
  • Working with gas lines and combustion components requires careful safety precautions or professional installation
Detailed Review

The WS-100-38 natural gas pilot assembly is an aftermarket replacement part engineered for direct-vent gas fireplaces, gas fireplace inserts, and freestanding gas stoves that utilize a side-mount SIT pilot bracket. This component is specifically aimed at existing gas fireplace owners, property managers, and repair technicians dealing with common pilot issues, such as a pilot flame that will not stay lit, weak millivolt output to the gas control valve, or a failed spark igniter.

In gas fireplace operation, the pilot assembly serves as the foundational safety and ignition hub. This particular unit includes the spark electrode for ignition, a thermocouple to keep the safety magnet open in manual valves, and a thermopile (generator) that produces the electrical current required to operate main burner valves and wall switches. When installed in compatible natural gas appliances, it produces the targeted pilot flame required to envelop both sensor probes while smoothly bridging the flame to the main burner tube.

The build consists of a durable metal side-mount bracket finished in silver, designed to hold the pilot hood, sensors, and ignition lead rigidly in place against combustion draft and thermal cycles. Because direct-vent fireboxes undergo repeated heating and cooling, the pre-crimped sensor leads, threaded thermocouple connection, and flexible aluminum pilot tubing provide standard mechanical connections that correspond to standard SIT gas train layouts.

Installation involves removing the glass door barrier of the direct-vent fireplace, disconnecting the old pilot tube and wiring leads from the gas valve, unbolting the side-mount bracket from the burner base, and securing this unit in the identical orientation. Because it replaces several individual components simultaneously, it eliminates the need to diagnose whether an ignition failure stems from a deteriorating thermocouple, an oxidized thermopile, or a cracked ceramic electrode insulator.

Important limitations center on fuel and mechanical fit. This pilot assembly is explicitly manufactured for natural gas fuel supplies and direct-vent setups; it must not be used on liquid propane systems without verified, appliance-approved conversions. Furthermore, while the manufacturer lists cross-compatibility with several part numbers including 30200, 700-088, 69L17, 904405, H3466, RPA020, WS100-38, 0199702, and 910-034, buyers should physically compare the mounting bracket configuration and pilot hood angle against their original equipment to verify a precise match.

Overall, this replacement pilot assembly offers a practical, budget-friendly repair solution when an existing Napoleon or SIT-equipped natural gas direct-vent fireplace suffers from pilot failure. For homeowners comfortable with gas appliance maintenance, or technicians seeking an all-in-one replacement package, it provides the essential components needed to restore reliable hearth heating without the expense of full burner replacement.

Replacement Compatibility

Compatibility verification is essential before purchasing replacement gas fireplace components. This SIT side-mount pilot assembly is listed to replace OEM part numbers 30200, 700-088 (700088), 69L17 (69L1701, 69L17_0), 904405, H3466, RPA020, WS-100-38 (WS100-38), 0199702, and 910-034.

It is commonly matched to select Napoleon gas burning stoves and direct-vent gas fireplaces utilizing standard side-mounting SIT pilot brackets. Buyers should check their appliance rating plate, owner manual, or existing pilot bracket geometry to confirm that both the mounting footprint and the natural gas designation match before beginning repairs.

Fuel & Venting

This pilot assembly is designated exclusively for natural gas direct-vent appliances. Natural gas and liquid propane operate at different line pressures and require specific orifice dimensions to maintain correct air-fuel combustion, meaning this assembly cannot be installed in propane fireplaces without factory-approved adjustments.

Because direct-vent fireplaces operate with sealed combustion chambers, maintaining an airtight firebox seal and leak-free gas connections after installing this pilot assembly is mandatory for safe operation. A gas leak test should always be performed on all fittings prior to reigniting the appliance.

4
Top Rated

Sierra Flame Newcomb 36 Direct Vent Linear Natural

Sierra Flame
9.9 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The Sierra Flame Newcomb 36 is a 36-inch direct-vent natural gas linear fireplace featuring electronic ignition, clean face tempered glass, and included fire media and remote control. It is a solid choice for homeowners and remodelers looking to build a sleek, contemporary gas fireplace into an interior living space.
Pros & Cons

Pros

  • Clean-face linear design with tempered glass offers an uncluttered modern hearth profile
  • Includes both decorative fire glass and rock media as well as a digital remote control
  • Direct-vent configuration exhausts outdoors while drawing outside air for sealed combustion
  • Electronic ignition eliminates the fuel waste of a standing pilot
  • Substantial 115-pound build quality with a clean black enclosure finish

Cons

  • Requires professional natural gas plumbing and direct-vent pipe routing through an exterior wall or roof
  • Specific BTU heat output and rough framing cutout dimensions are not listed in the basic product data and must be confirmed in the manual
  • Configured specifically for natural gas without an included or verified propane conversion kit
Detailed Review

The Sierra Flame Newcomb 36 is a dedicated 36-inch direct-vent linear natural gas fireplace tailored for homeowners, builders, and remodelers creating a modern focal point. Designed to be built into a wall or custom enclosure, this unit replaces traditional bulky hearth formats with a streamlined horizontal profile. If you have an accessible natural gas line and desire authentic gas flames with modern electronic operation, this fireplace provides a comprehensive package with media and controls included.

In terms of daily operation, the Newcomb 36 uses an electronic ignition system to initiate the flame, avoiding the continuous fuel consumption associated with older standing pilot designs. The sealed direct-vent combustion system pulls air from outside and vents exhaust outdoors, helping protect indoor air quality. Ambiance is immediately customizable out of the box because the fireplace ships with both decorative fire glass and natural-style rock media. The included deluxe digital remote control lets you operate the burner without having to open the front glass or access internal controls manually.

The build quality centers around a durable black chassis weighing 115 pounds, reflecting heavy-duty construction suited for permanent wall integration. A clean-face surround frame sits flush against your finishing materials, while the tempered front glass provides a clear view of the linear burner bed. The clean lines allow tile, non-combustible facing, or stone to frame the glass directly, creating a sleek appearance common in contemporary living spaces.

Regarding physical footprint, the exterior dimensions measure 15.5 inches deep, 38 inches wide, and 33.5 inches high. Because this is a built-in direct-vent gas appliance rather than a freestanding or plug-and-play unit, planning is essential. You must account for appropriate direct-vent pipe runs through an exterior wall or roof, route a dedicated natural gas line to the chassis, and adhere to manufacturer clearances to combustibles. Buyers should verify exact rough framing cutouts and electrical requirements for the ignition system in the official installation manual prior to cutting into wall framing.

A realistic limitation is that specific BTU output ratings, thermal efficiency figures, and room heating square-footage guidance are not provided in the basic product data. While gas fireplaces naturally deliver supplemental heat, you will need to review manufacturer documentation to confirm exact heat specifications for your climate and room volume. Additionally, the unit is configured for natural gas; anyone hoping to use liquid propane must verify conversion compatibility before purchasing.

For homeowners and remodelers seeking a contemporary 36-inch linear natural gas fireplace with clean-face aesthetics, electronic ignition, and included digital controls, the Sierra Flame Newcomb 36 is a practical, feature-complete option. Its bundled media and remote make setup straightforward once gas and venting lines are properly routed by a licensed professional.

Fuel & Venting

The Sierra Flame Newcomb 36 is engineered specifically to operate on natural gas. Natural gas configurations require connection to a household gas utility line. Liquid propane is not interchangeable, and fuel conversion should never be assumed without explicit manufacturer kits and instructions.

As a direct-vent appliance, this fireplace uses a sealed combustion system. It draws outdoor air for combustion while safely venting exhaust gasses outside through specialized venting pipe routed through an exterior wall or roof. This design preserves indoor air quality compared to vent-free designs. Professional installation by a licensed gas technician is recommended to ensure gas line pressures and direct-vent clearances meet all local building codes.

Fit & Dimensions

The overall exterior dimensions of the Sierra Flame Newcomb 36 are 15.5 inches deep, 38 inches wide, and 33.5 inches high, with a total unit weight of 115 pounds. The nominal 36-inch width refers to the viewing and burner tier, while the 38-inch total width encompasses the chassis housing.

Because product dimensions do not equal rough framing dimensions, remodelers must consult the official manufacturer installation guide to determine exact stud spacing, framing header heights, platform requirements, and non-combustible wall clearances. Ensuring your planned wall cavity provides sufficient depth for both the 15.5-inch chassis and the required rear direct-vent elbow is critical before framing begins.

5

Napoleon WS-100-39 Propane Gas Pilot Assembly

Napoleon
9.8 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The Napoleon WS-100-39 is a dedicated replacement propane gas pilot assembly engineered for compatible Napoleon direct-vent fireplaces utilizing a side-mount configuration. It is an ideal fix for homeowners and technicians seeking to restore reliable ignition and stable pilot flame performance on LP-fueled direct-vent hearth systems.
Pros & Cons

Pros

  • Genuine Napoleon part engineered to match factory side-mount specifications and alignment
  • Configured specifically for liquid propane direct-vent fireplace installations
  • Complete assembly format simplifies swapping out aging, corroded, or malfunctioning pilot parts
  • Restores consistent pilot flame generation and smooth main burner ignition

Cons

  • Restricted exclusively to propane gas systems and cannot be used for natural gas configurations
  • Requires fireplace owners to verify part number WS-100-39 against their specific model manual prior to purchase
  • Gas supply line connection typically requires installation by a qualified service professional
Detailed Review

The Napoleon WS-100-39 Propane Gas Pilot Assembly is an authentic replacement part designed specifically for select Napoleon direct-vent gas fireplaces fueled by liquid propane (LP). This complete assembly is intended for homeowners, property managers, and hearth technicians who need to resolve recurring pilot outages, weak ignition flames, or worn thermocouple and thermopile components on an existing side-mounted pilot bracket.

As an essential ignition component, this pilot assembly delivers the steady pilot flame required to safely ignite the main gas burner and energize the millivolt safety circuit. Because the assembly is factory-configured for liquid propane, the internal orifice is sized precisely for propane operating pressures. In sealed direct-vent fireplaces, having an exact-fit pilot assembly is vital for maintaining balanced combustion airflow and dependable flame-sensing operation.

Constructed with durable metal brackets and high-temperature ignition leads, the unit features a classic black bracket finish and measures approximately 8 by 2 by 5 inches with an overall weight of roughly 0.81 pounds. The side-mount design matches designated Napoleon firebox footprints, keeping the pilot hood and flame sensor positioned at the correct angle relative to the burner ports for smooth flame transfer.

Installing this side-mount pilot assembly requires accessing the lower firebox, shutting off the gas supply, and disconnecting the pilot tubing and wiring harnesses from the gas control valve. Because this replacement component connects directly to a pressurized gas line inside a sealed combustion chamber, leak testing is mandatory, and installation by a qualified gas technician or certified hearth professional is strongly recommended.

The main limitation of this assembly is its strict fuel and mounting specificity. It is engineered exclusively for liquid propane direct-vent models and cannot be adapted for natural gas systems without proper manufacturer conversion hardware. Furthermore, the side-mount bracket will not work in Napoleon fireplaces requiring a top-mount or rear-mount pilot bracket. Buyers should inspect their fireplace rating plate and owner manual schematics to verify that part number WS-100-39 matches their appliance requirements.

For owners of compatible Napoleon direct-vent propane fireplaces struggling with ignition failure or an uncooperative pilot flame, the WS-100-39 pilot assembly provides a direct, cost-effective replacement. It restores reliable pilot operation and burner ignition without the expense of replacing the entire fireplace burner assembly.

Fuel & Venting

The Napoleon WS-100-39 is engineered strictly for liquid propane (LP) applications. Propane operates under significantly higher manifold pressure than natural gas and requires a smaller pilot orifice to ensure clean, safe combustion. This assembly should never be connected to a natural gas line.

Direct-vent fireplaces utilize a completely sealed combustion chamber that draws fresh air from outdoors and vents exhaust outside through dedicated venting pipe. Maintaining an exact factory-spec pilot assembly inside this sealed environment ensures that draft pressures remain balanced and the pilot flame does not pull away from the sensor during operation.

Replacement Compatibility

Compatibility for the Napoleon WS-100-39 relies on three critical factors: brand, fuel type, and mounting geometry. This component is designed specifically for Napoleon direct-vent gas fireplaces that use liquid propane and call for factory part number WS-100-39.

Before ordering, check the user manual or exploded parts diagram on the appliance data plate located inside your fireplace control compartment. Verify that your unit utilizes a side-mount pilot bracket rather than a rear or bottom bracket, as bracket styles are not interchangeable across different firebox designs.

6

Lennox IHP 62L12 OEM Natural Gas Pilot Assembly

Pro Parts Plus
9.8 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The 62L12 Lennox IHP OEM natural gas pilot assembly restores reliable ignition to direct-vent fireplaces using an integrated 750mV thermopile generator. It is ideal for homeowners and service technicians repairing compatible Lennox and IHP natural gas appliances that specify part number 62L12.
Pros & Cons

Pros

  • Authentic OEM Lennox and IHP replacement part built to factory specifications
  • Includes the 750mV thermopile thermo-generator for standard millivolt control valve operation
  • Compact 1 x 4 x 1.5-inch dimensions match original direct-vent mounting brackets
  • Eliminates guesswork when servicing compatible Lennox natural gas direct-vent fireplaces

Cons

  • Configured exclusively for natural gas and cannot be used in liquid propane setups without verified conversion parts
  • Requires checking your fireplace model and owner manual to ensure exact part number 62L12 compatibility
  • Gas line and electrical pilot replacement requires careful handling and may necessitate qualified professional service
Detailed Review

The 62L12 Lennox IHP OEM Natural Gas Pilot Assembly is a factory-designated replacement component for Lennox and Innovative Hearth Products (IHP) direct-vent gas fireplaces. If an existing natural gas unit experiences a weak pilot flame, fails to generate sufficient voltage to open the gas valve, or will not stay lit, this assembly serves as an exact-fit replacement. It best suits homeowners, landlords, and hearth maintenance specialists looking to restore an existing appliance rather than replacing the complete firebox.

Regarding performance and electrical output, this assembly features a 750mV thermopile thermo-generator. Direct-vent millivolt systems depend on the heat of the pilot flame striking the thermopile to produce millivoltage, which in turn holds open the safety magnet and triggers the main gas valve upon command. Supplying standard 750mV generation ensures reliable communication with wall switches, remotes, and millivolt wall thermostats.

The build quality reflects OEM manufacturing standards for Lennox and IHP hearth equipment. Measuring roughly 1 x 4 x 1.5 inches with a dark finish, it integrates cleanly into the burner pan assembly without altering the visual appearance of the ember bed. Its pilot hood, bracket, and thermopile construction are specifically designed to endure the high internal operating temperatures of sealed direct-vent fireboxes.

Setup involves accessing the fireplace burner floor behind the direct-vent glass panel. Because this replacement component connects directly to the pilot gas tube and millivolt control valve terminals, careful alignment and proper gas leak testing are critical steps during installation. Routine maintenance is straightforward and typically involves keeping the pilot orifice and thermopile clear of dust, lint, and carbon residue during annual inspections.

The primary limitation is fuel specificity. This assembly is factory-built strictly for natural gas (NG) applications and is not compatible with liquid propane (LP) systems without appropriate factory-approved conversion hardware. In addition, direct-vent fireplace models vary widely in bracket geometry and tube length, meaning buyers must consult their fireplace rating plate and user manual to confirm that 62L12 is the correct part number.

For owners troubleshooting a malfunctioning Lennox or IHP direct-vent hearth appliance, the OEM 62L12 pilot assembly delivers a dependable, factory-standard solution. Once natural gas fuel compatibility and part number requirements are verified, this assembly provides an effective way to restore smooth ignition and dependable warmth to your living space.

Replacement Compatibility

This pilot assembly matches Lennox and IHP part number 62L12. It is engineered specifically as an original equipment manufacturer replacement for designated direct-vent natural gas fireboxes across the Lennox and IHP family of brands.

Direct-vent fireplace models utilize specific pilot brackets, tube routings, and orifice sizes. Before ordering, locate the rating plate inside your fireplace control compartment or consult your owner manual to confirm that part number 62L12 is explicitly listed for your exact model.

Fuel & Venting

This pilot assembly is configured exclusively for natural gas (NG). It should not be connected to liquid propane (LP) fuel supplies unless documented conversion procedures and authorized conversion orifices are utilized.

The assembly is rated for direct-vent hearth applications, which feature a sealed glass front and coaxial venting that draws combustion air from outdoors while expelling exhaust gases outside the home.

7

Napoleon Ascent B36 Direct Vent Clean Face Natural

AMS FIREPLACE INC.
9.5 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The Napoleon Ascent B36 (SKU: B36NTRE-1) is a direct-vent natural gas fireplace featuring a clean-face design, realistic PHAZER log set, and an electronic ignition with backup power-failure controls. It is an ideal built-in solution for homeowners and remodelers seeking a reliable, permanent gas hearth for living rooms or media spaces.
Pros & Cons

Pros

  • Louver-free clean face profile provides a modern look that integrates smoothly with custom hearth surrounds
  • Battery-backed control system provides dependable heat during winter storms and electrical power cuts
  • Adjustable flame and heat output lets you balance ambiance and supplemental warmth as conditions change
  • Exclusive PHAZER logs and glowing ember bed deliver an authentic wood-fire look without the mess of firewood

Cons

  • Configured specifically for natural gas; using liquid propane requires verifying a compatible conversion kit
  • Requires professional direct-vent pipe routing, custom framing, and licensed gas line installation
  • Product listing does not detail exact framing dimensions or BTU ratings, requiring verification with the manufacturer manual
Detailed Review

The Napoleon Ascent B36 (model B36NTRE-1) is a built-in direct-vent natural gas fireplace designed for homeowners, builders, and remodelers seeking an attractive, permanent hearth centerpiece. Styled with a clean-face frame that eliminates exterior metal louvers, this unit allows finishing materials like stone, tile, or drywall to frame right up to the firebox. It best suits property owners planning a permanent living room, family room, or media space installation connected to a residential natural gas line.

Burner performance and visual ambiance center on Napoleon's pan-style burner, which distributes gas evenly under the exclusive PHAZER log set and glowing ember bed. The included logs and ember media replicate the warm, organic glow of real firewood without requiring any ash disposal or chimney cleaning. Thanks to the built-in flame and heat adjustment controls, you can decrease the flame height on warmer evenings or increase output when supplemental comfort is needed.

For everyday operation, the electronic ignition system provides straightforward, energy-conscious startups without keeping a standing pilot flame running constantly. A critical advantage of this control layout is the backup power system, which maintains functionality during electrical blackouts. For homeowners in cold-weather regions vulnerable to winter storm outages, this feature provides practical peace of mind by keeping an active heat source operational when the main grid fails.

Because the B36 Ascent is a direct-vent appliance, it operates within a sealed combustion loop, bringing in fresh outside air for burning while safely expelling exhaust outdoors via direct-vent pipe. Planning the installation requires proper rough-framing cutouts, gas supply line plumbing, and appropriate vent pipe clearances through an exterior wall or roof. Due to the technical nature of gas lines and sealed venting, installation should be handled by a licensed professional following local building and mechanical codes.

Buyers should keep in mind that this unit is dedicated to natural gas use, and any potential conversion to liquid propane requires verifying the availability of an approved conversion kit before purchase. Additionally, exact framing dimensions, clearances to combustibles, and specific BTU ratings are not detailed in the raw listing data and must be verified in Napoleon's official product documentation before framing begins.

For remodelers and homeowners looking for a reputable direct-vent gas fireplace that blends clean architectural lines with emergency power-outage readiness, the Napoleon Ascent B36 delivers dependable warmth and a classic fire view.

Fuel & Venting

The Napoleon Ascent B36 (SKU: B36NTRE-1) is factory-configured to run on natural gas and requires a dedicated gas supply line. Direct-vent technology uses a co-axial or co-linear sealed pipe system that pulls fresh combustion air from outside the home while venting combustion gases directly outdoors, protecting indoor air quality.

Because venting routes must conform to strict horizontal and vertical length limits specified by the manufacturer, buyers should verify framing depth, chase clearances, and exterior termination locations with a certified gas professional prior to installation.

Flame & Controls

This fireplace utilizes an electronic ignition mechanism paired with a pan-style burner for smooth, reliable ignition. Inside the sealed combustion chamber, Napoleon's PHAZER log set and glowing ember bed create a natural flame pattern with realistic depth and glow.

Flame and heat adjustment controls allow users to tailor both the flame height and heating output to match room comfort requirements. An integrated backup control system ensures that the fireplace remains functional during electrical outages, delivering dependable heat when household power is lost.

Frequently Asked Questions

Can a direct-vent gas fireplace operate during an electrical power outage?

Yes, models equipped with battery backup systems or millivolt standing pilots can operate during power outages. Napoleon Ascent units with electronic ignition feature an emergency battery backup control system that allows the burner to ignite and generate heat even when household power fails. The optional circulation blower, however, requires standard 120-volt electricity to push air through the room.

What is the difference between natural gas and propane pilot assemblies for a Napoleon 35 Ascent X 70 Direct Vent Gas Fireplace?

The pilot orifice size and gas pressure ratings differ fundamentally between fuel configurations. A natural gas pilot assembly like the WS-100-38 cannot be used directly on liquid propane lines without causing incorrect flame patterns or soot buildup. Propane models such as the WS-100-39 feature calibrated metering designed specifically for higher-pressure bottled gas, making exact fuel matching critical before replacement.

Does a direct-vent gas fireplace require a traditional masonry chimney?

No, direct-vent fireplaces do not require a masonry chimney or vertical clay flue. They utilize sealed, co-axial or co-linear flexible or rigid vent pipes that route exhaust horizontally through an exterior wall or vertically through the roof. This sealed combustion chamber draws outside air for burning, preventing indoor draft loss while keeping room air clean.

How do I know if my direct-vent gas fireplace pilot assembly needs replacement?

A weak millivolt signal from the thermopile or thermocouple that fails to hold the safety magnet open usually indicates assembly wear. Common symptoms include a pilot flame that lights but extinguishes as soon as you release the control knob, or a pilot that fails to trigger the main burner. Inspecting whether components have heavy carbon buildup or worn lead wires helps determine if a direct replacement is necessary. Adding a compatible decorative fireplace front or mesh barrier also requires checking that access to the lower pilot control valve remains unobstructed.

What framing dimensions are required before installing a linear or clean-face direct-vent fireplace?

Framing requirements vary significantly by model and manufacturer framing manuals must always be consulted prior to rough-in work. For example, large linear units like the 72-inch American Hearth Boulevard require framing dimensions of 61 5/8 inches high by 91 5/8 inches wide by 21 1/2 inches deep, plus dedicated non-combustible clearances above the opening. Standard clean-face units like the 36-inch Napoleon Ascent require compact enclosures but still demand strict clearance to combustible framing headers.