Keeping an existing gas hearth running reliably comes down to finding the exact replacement components built for your firebox. Standard wear on millivolt gas valves, thermocouple wiring, and circulation fans can leave your home chilly when cold weather hits. Many homeowners with heatilator novus b vent fireplaces discover that routine maintenance requires double-checking exact model serial numbers before ordering new parts. Installing compatible replacement pilot assemblies or upgraded blowers helps restore dependable heat circulation without replacing the whole fireplace. Taking time to verify model codes also prevents installation headaches around gas shutoff valve boxes during routine gas servicing.
Ventilation type and fuel setup dictate which components fit safely into your hearth. Natural draft systems pull room air for combustion and exhaust vertically, making proper ventilation and exact part fit essential. Checking model numbers guarantees that parts like fuel conversion kits for gas fireplaces match your specific firebox dimensions and venting. Rating tags located on the firebox sheet metal confirm compatibility in minutes. Our guide reviews reliable replacement parts and accessories compatible with Heatilator Novus B Vent Fireplaces to keep your hearth running safely throughout 2026.
Pros
- Direct replacement fit for multiple popular 36-inch Heatilator fireplace models
- Classic black frame finish matches factory firebox trim and living room decor
- Eliminates guesswork for owners with confirmed matching model numbers
- Restores a neat, finished appearance to the hearth opening
Cons
- Strictly limited to the specified Heatilator models and will not fit generic or unlisted fireboxes
- Requires homeowners to locate and verify the metal model tag inside the firebox prior to ordering
- Manufacturer data does not include detailed mounting hardware or installation instructions
The Burgess Manufacturing Corporation Fireplace Glass Door Set is a dedicated replacement door system designed for homeowners looking to restore or refresh specific 36-inch Heatilator factory-built fireplaces. Designed to fit models E36, E-36I, EC36, EC-36I, EL36, BC36R, and BC36C, this door assembly directly addresses the difficulty of finding proper replacement doors for existing prefabricated fireboxes. It best suits property owners, remodelers, and landlords who need to replace broken, missing, or aged glass doors without altering the original fireplace enclosure.
Prefabricated zero-clearance fireplaces require precisely sized door assemblies that match the manufacturer original track and frame clearances. This glass door set provides a clean barrier across the opening of compatible 36-inch Heatilator units, helping to complete the front facade and maintain a neat appearance when the hearth is idle. Because factory-built fireboxes depend on specific mounting geometry, choosing a dedicated model-specific door set avoids the loose fit and mounting failures often associated with universal or adjustable aftermarket alternatives.
The door set features a classic black finish that blends naturally with black sheet metal firebox walls and traditional surround materials. The framework holds glass panels configured to match the original opening proportions of the supported 36-inch Heatilator series. While specific metal gauge and glass thickness details are not listed in the product data, the assembly is built specifically to serve as a direct replacement component for the designated units.
Verification prior to ordering is critical for a smooth installation. Heatilator fireplaces typically include a metal rating plate mounted on the interior sheet metal wall of the firebox, which lists the exact model number, brand, and date of manufacture. Buyers must locate and check this tag to confirm an exact match with E36, E-36I, EC36, EC-36I, EL36, BC36R, or BC36C, as prefabricated firebox frames leave no tolerance for dimensional mismatch or bracket misalignment.
The primary limitation of this product is its lack of universal fit. The manufacturer explicitly emphasizes that these doors will not fit any unit outside the supported model list, meaning they cannot be modified for masonry fireplaces, other Heatilator sizes, or fireboxes from alternative brands. In addition, buyers should verify that their existing firebox sheet metal and mounting channels remain intact before installing new replacement doors.
For homeowners with a verified 36-inch Heatilator model from the supported series, this Burgess Manufacturing Corporation door set provides a dependable, exact-match solution for hearth refurbishment. If the interior firebox tag confirms one of the listed model numbers, this replacement glass door set offers an effective way to restore clean lines and proper finish to your living space.
Compatibility for this glass door set is strictly limited to specific 36-inch Heatilator prefabricated fireplace models. Supported units include Heatilator E36, E-36I, EC36, EC-36I, EL36, BC36R, and BC36C.
Homeowners must verify their fireplace model prior to ordering by locating the metal identification tag typically affixed to the inside sheet metal wall of the firebox. This rating plate confirms the exact model number, make, and manufacturing information required to ensure proper alignment and mounting fit.
Pros
- Direct replacement part for part number 060-523 across multiple direct-vent gas fireplace brands
- Calibrated for variable liquid propane (LP) fuel systems with manual flame modulation
- Millivolt design operates independently of household line voltage during power outages
- Significantly more accessible alternative to expensive original manufacturer replacement assemblies
Cons
- Configured strictly for liquid propane and cannot be connected to natural gas lines
- Gas line disconnection, component installation, and safety leak testing require careful mechanical skill or professional service
- Generic aftermarket packaging does not include replacement mounting brackets, gaskets, or printed instructions
The 060-523 replacement gas valve is a variable millivolt valve specifically configured for liquid propane (LP) direct-vent fireplaces. Built to replace OEM part number 060-523, this component caters directly to existing owners of Heat N Glo, Heatilator, and Quadra-Fire direct-vent units who are experiencing weak burner output, pilot issues, or valve failure. For homeowners and service professionals managing aging gas appliances, sourcing a reliable replacement valve is essential to restoring safe, adjustable heat output.
In terms of functionality, this valve operates within standard millivolt control systems, using the voltage generated by a standing pilot thermopile to actuate the gas flow. Because millivolt systems do not depend on external household electricity to open the main gas valve, it ensures your direct-vent fireplace can deliver reliable heat even during winter power outages. The variable control knob enables flame modulation, letting you dial the propane flame height up or down depending on your current room heating needs.
The build quality reflects precision aftermarket engineering tailored for durability in high-heat appliance enclosures. The metal valve body includes the standard input and output gas fittings, pilot tube connection, and electrical terminal blocks needed to integrate seamlessly with existing millivolt wall switches or thermopiles. While marketed by a generic brand, the component is manufactured to match the form factor and operational thresholds of the original factory part it replaces.
Installation demands caution and precise alignment with your existing direct-vent gas setup. Working with propane lines requires shutting off the gas supply, disconnecting the thermocouple and pilot lines, and threading the valve correctly into the burner manifold. Given the safety risks associated with pressurized combustible fuel, DIYers should possess mechanical experience, and most homeowners will benefit from hiring a licensed gas technician to complete the swap and perform mandatory soapy water or electronic leak checks.
Before purchasing, verification of your exact fireplace model and fuel type is critical. This valve is strictly intended for liquid propane (LP) configurations and is incompatible with natural gas supply lines. While the compatibility list is expansive-spanning models like the 6000TRB, 8000TVC, and SL-550TR-C-always cross-check your fireplace owner manual or existing valve label to confirm that part 060-523 is the specified millivolt LP valve for your appliance.
Overall, the 060-523 variable LP valve offers a practical, budget-conscious repair path to breathe new life into an existing direct-vent fireplace. If your Heat N Glo, Heatilator, or Quadra-Fire fireplace suffers from gas delivery failures or an unresponsive control knob, this direct-fit replacement valve provides a dependable way to restore variable propane warmth to your living space.
This replacement valve replaces part number 060-523 and fits a broad range of direct-vent gas appliances from Heat N Glo, Heatilator, and Quadra-Fire. Documented model fits include the Quadra-Fire QV32, QV36, and QVi series inserts (QVi25, QVi30, QVi35), alongside Heat N Glo R-series models (R-3500, R-4500, R-5500, R-6500).
It also supports extensive flagship Heat N Glo direct-vent models, including the 6000 series (6000BE, 6000CAMP, 6000DVTFL, 6000GDVFL, 6000TRB, 6000TVB, 6000XLS), 7000 series, and 8000 series (8000DVTFL, 8000GDVFL, 8000TR, 8000TVC), as well as SL series models like the SL-350TRS and SL-550TR. Always confirm your model number on the rating plate inside your fireplace control compartment before ordering.
This valve is calibrated specifically for liquid propane (LP) gas pressure and flow characteristics. Do not attempt to install or connect this component to a natural gas line, as natural gas operates under significantly different delivery pressures and manifold requirements.
Gas appliance repairs carry inherent risks of gas leaks, carbon monoxide exposure, and fire. All installations should include fresh thread sealant rated for LP gas, strict adherence to manufacturer torquing specifications, and thorough leak testing prior to lighting the standing pilot. If you are not fully confident in handling gas fittings, engage a qualified gas technician.
Pros
- Quiet 26 dBA sound rating keeps background blower noise to a minimum.
- Wireless remote provides 10 precise digital speed settings without opening lower fireplace louvers.
- Energy-efficient DC motor with dual ball bearings delivers up to 120 CFM airflow.
- Compact standard sizing fits multiple brand replacements including select Lennox, Majestic, Hearth Glo, and Rotom units.
Cons
- Buyers must measure their lower fireplace cavity to verify clearance for the 10.5 x 3.5 x 3.6-inch housing.
- Circulates existing fireplace heat only; overall warming output depends entirely on the fireplace heat source.
- Requires access to an electrical power source within or adjacent to the fireplace blower compartment.
The AC Infinity AIRBLAZE S10 is a dedicated 10-inch fireplace blower fan kit engineered to improve heat distribution in compatible residential gas and wood fireplaces. Designed for homeowners looking to replace a worn factory blower or boost heat circulation from an underperforming fireplace cavity, this unit pushes trapped warmth outward into the living room rather than allowing it to pool inside the firebox structure.
Air movement is driven by an energy-efficient DC motor paired with dual ball bearings, generating up to 120 CFM of airflow. Unlike standard fixed-speed AC blowers that can produce noticeable electrical hum, the AIRBLAZE S10 maintains a low 26 dBA sound level at lower speeds. The system uses pulse-width modulation (PWM) digital controls across 10 speed levels, allowing users to dial in gentle, barely audible circulation or switch to higher velocities for faster warm-air distribution.
Control is managed via an included 10-speed wireless remote, eliminating the need to kneel down and reach inside hot lower louvers to adjust fan output. The digital speed controller communicates directly with the DC motor for smooth step adjustments across the entire airflow range. This wireless setup adds practical daily convenience, allowing you to regulate heat circulation directly from a couch or dining area.
In terms of dimensions, the blower measures 10.5 inches wide, 3.5 inches deep, and 3.6 inches high. Its standard-size footprint allows it to serve as a direct replacement blower for select models from brands such as Lennox, Hearth Glo, Majestic, and Rotom. The black housing and dual ball bearing assembly are built for steady, long-term rotation in warm lower-chassis environments.
A critical consideration before ordering is physical clearance. Fireplace compartments vary widely across production years and trim levels, so buyers must measure their fireplace lower access cavity and confirm electrical outlet availability. Additionally, the unit does not produce heat independently; its performance depends on the thermal output of your existing gas or wood fireplace.
For homeowners aiming to maximize room warmth while keeping mechanical noise low, the AC Infinity AIRBLAZE S10 offers a solid balance of air movement, quiet DC operation, and remote convenience. It serves as an effective, modern replacement for noisy older blowers in compatible fireplace enclosures.
The blower operates on a DC motor system rated at up to 120 CFM of maximum airflow, designed to move substantial air volume through standard lower-louver configurations. Dual ball bearings reduce rotational friction, contributing to a published operational noise level of 26 dBA.
Digital PWM control allows the motor to run smoothly across 10 distinct speed steps without the buzzing often encountered on variable AC motor speed dials. This makes it adaptable for both quiet nighttime heating and rapid daytime warming.
The fan housing measures approximately 10.5 x 3.5 x 3.6 inches (listed in detailed specifications as 3.6 x 10.27 x 3.53 inches). The manufacturer lists this standard form factor as compatible for replacement use in select Lennox, Hearth Glo, Majestic, and Rotom fireplaces.
Because individual fireplace models feature varying bracket locations, lower access depths, and electrical configurations, homeowners should verify physical compartment dimensions and power access prior to installation.
Pros
- Complete drop-in cluster includes thermocouple, thermopile, spark electrode, and gas tubing
- Accurately replaces widely used OEM part numbers 25660 and 4021-732
- Pre-measured 24-inch leads fit factory chassis routing channels neatly
- Long ceramic sparker insulation reduces risk of grounding out against metal brackets
Cons
- Configured strictly for natural gas systems and cannot be used with liquid propane without proper conversion
- Requires gas line connection and electrical terminal hookup, demanding careful installation or professional service
- Extensive model list requires exact model number and revision verification before purchasing
The AMECA Natural Gas Pilot Assembly (replaces part numbers 25660 and 4021-732) is a specialized replacement component designed for select Heatilator and Heat & Glo direct-vent gas fireplaces. This assembly serves homeowners, property managers, and repair technicians facing recurring pilot outages, weak spark generation, or failing millivolt output on older gas hearth units. By providing an entirely new pilot burner cluster, this kit eliminates the guesswork of troubleshooting individual worn sensors and restores dependable operation.
Functionally, this pilot assembly bundles all vital components necessary for safe gas fireplace operation and automated ignition control. It features an extended 4-inch ceramic spark electrode to ignite the pilot flame cleanly, a thermocouple to ensure flame safety, and a thermopile that generates the millivoltage required to open the main gas control valve. With a 24-inch overall reach, the attached wiring and pilot tubing provide ample length to route from the burner mounting plate down to the lower valve compartment without tension or tight bends.
Construction quality focuses on durability under intense operating temperatures. The extended 4-inch ceramic sleeve around the spark electrode prevents electrical arcing against the fireplace chassis, ensuring the spark jumps directly across the gas flow. Both the thermocouple and thermopile probes are built to withstand continuous direct flame exposure, maintaining stable millivolt generation over prolonged burning cycles. Having all probes pre-mounted on a unified bracket ensures proper flame impingement without tedious manual alignment.
Installation involves shutting off the gas supply and electrical power, opening the direct-vent glass assembly, and removing the old pilot bracket from the burner pan. The replacement unit bolts into factory mounting holes, while the 24-inch leads connect directly to the main gas valve terminals and push-button or electronic spark module. Because direct-vent fireplaces rely on sealed combustion and precise gas line fittings, installation should follow manufacturer safety guidelines, and homeowners unfamiliar with gas plumbing should consult a qualified gas technician.
A critical consideration is fuel configuration: this unit is pre-jetted strictly for natural gas installations and must not be connected to liquid propane (LP) supplies without appropriate orifice modification. In addition, while the compatibility list covers dozens of models including the GCBC, GCDC, GDFL, and GNDC series, variations exist across production years and valve brands such as S.I.T. or Robertshaw. Buyers should verify their fireplace rating plate and part manual before ordering to confirm fitment.
For owners of compatible Heatilator or Heat & Glo fireplaces struggling with a pilot flame that refuses to stay lit or fails to trigger the main burner, this all-in-one natural gas pilot assembly provides a direct, cost-effective solution. Replacing the entire pilot group avoids the frustration of piecemeal repairs and ensures dependable, cozy heating when chilly weather arrives.
This pilot assembly directly replaces Heatilator and Heat & Glo part number 25660 as well as the updated reference number 4021-732. It is engineered to mount seamlessly onto the factory pilot bracket of compatible direct-vent natural gas fireplaces.
Listed compatible series include GCBC60, GCBC60L, GCBC42L, GCBC80, GCDC36, GCDC42, GCDC60, GCDC80, GCDC80E, GDFL36, GDFL60V, GDCH36, GDCH60, GDCL60, GDCR60, GDST60, GNDC30, GNDC33, GNDC36, GNDH30, GNBR36, GNTC50, GC150, GBiS36, GBFL36, CD4236R, and CD4842MR models.
Because fireplace manufacturers frequently update sub-components across manufacturing years, always double-check the appliance rating plate located behind the lower control access panel before placing an order.
This pilot assembly is configured specifically for natural gas (NG) applications. It must not be connected to a liquid propane (LP) fuel supply unless properly adapted with an approved manufacturer conversion orifice, as incorrect fuel usage poses significant safety hazards.
The assembly includes 24 inches of reach for the pilot tubing and lead wires, accommodating standard direct-vent firebox routing channels. Replacing the assembly requires disconnecting gas tubing from the valve, unthreading sensor leads, and resealing the direct-vent glass panel properly upon completion.
Working with gas lines and combustion seals requires strict adherence to local building codes. If you are uncomfortable testing for gas leaks or handling gas connections, hiring a certified hearth professional or licensed gas fitter is strongly recommended.
Pros
- Includes all four core pilot components: thermopile, thermocouple, igniter electrode, and supply tubing
- Direct fit replacement for multiple original part numbers across Quadra-Fire and Heatilator models
- Solves common gas fireplace failure symptoms such as pilots that extinguish when releasing the valve knob
- Pre-assembled bracket helps ensure proper sensor placement relative to the pilot flame hood
Cons
- Requires strict verification of fireplace model numbers and pre-serial number cutoffs before ordering
- Fuel type and pilot orifice specifications are not listed, requiring verification of natural gas or propane suitability
- Gas component installation requires adherence to fuel safety protocols and may require professional assistance
The EVIMOTAL Direct Vent Fireplace Pilot Assembly is an aftermarket replacement part manufactured for specific direct-vent gas fireplaces produced under the Heatilator and Quadra-Fire brand names. This component directly replaces worn, corroded, or failing pilot clusters to restore proper ignition and safe burner operation. It is best suited for homeowners, property managers, and maintenance personnel dealing with common millivolt fireplace problems, such as a pilot flame that will not stay lit, an igniter that fails to spark, or a thermopile that no longer generates adequate millivolts to open the main burner valve.
Functionally, this pilot assembly acts as both the ignition source and the central safety sensor platform for your direct-vent gas hearth. It bundles four critical elements: the sparker electrode for lighting the pilot gas, the pilot tubing for fuel delivery, the thermocouple for holding the pilot safety magnet open, and the thermopile for generating the electrical current that triggers the main gas valve. Sourcing these components together ensures that the flame sensors sit at the proper distance and angle relative to the pilot hood, which is critical for consistent heat transfer and reliable operation.
In terms of construction, the unit features standard metal hardware with a golden finish on the bracket and hood assembly, with overall package dimensions of 8 x 2 x 5 inches. The assembly includes pre-attached wiring leads and flexible pilot tubing ready for routing beneath the burner pan. The build follows standard direct-vent replacement specifications matching part numbers 485-510A, 4021-736, and 2103-010, providing a direct mechanical fit for designated fireplace chassis without requiring bracket modification.
Installation involves shutting off the fireplace gas supply, isolating any electrical or battery power, and removing the decorative log set and burner pan to access the pilot mount. The technician or homeowner must disconnect the old pilot gas line and sensor connections at the control valve, mount the new assembly to the burner base, and secure the fittings. Because direct-vent systems rely on sealed combustion chambers and tight gas connections, every gas joint must be checked with a certified leak-detection solution before relighting. Anyone uncomfortable working around gas lines and millivolt wiring should hire a licensed gas technician.
The most important limitation of this product is its narrow compatibility profile. While it fits numerous Quadra-Fire models, Heatilator compatibility is strictly tied to specific pre-serial number cutoffs on units such as the BCBV36, NB series, and ND series. Furthermore, the product data does not explicitly state whether the pre-installed pilot orifice is intended for natural gas (NG) or liquid propane (LP). Buyers must verify their unit serial number and ensure the pilot orifice matches their fuel source prior to installation.
For owners of supported Heatilator and Quadra-Fire gas fireplaces experiencing persistent ignition failures, the EVIMOTAL Pilot Assembly serves as a cost-effective, targeted replacement. It eliminates the trial-and-error approach of replacing individual sensors by renewing the entire pilot assembly at once. Confirm your fireplace model, serial number cutoff, and fuel supply requirements before ordering to ensure a smooth repair.
This pilot assembly replaces OEM part numbers 485-510A, 4021-736, and 2103-010. Compatibility requires matching both the exact fireplace model and, where applicable, the manufacturer serial number cutoff.
Compatible Quadra-Fire Gas Fireplace models include: QV32, QV32-A, QV36, QV36-A, QV36D, QV36D-A, QV36DB, QV36DB-A, QVI-30FB, QV-Pier, and QV-ST.
Compatible Heatilator Gas Fireplace models include: BCBV36 (Pre Serial # GA1551065); NB3630, NB3933, NB4236, and NB4842 (all Pre Serial # GA1587915); ND3630, ND3630L, and ND3630M (all Pre Serial # GA1587914); ND3933, ND3933L, and ND3933M (all Pre Serial # GA1587914); ND4236, ND4236L, and ND4236M (all Pre Serial # GA1587914); and ND4842, ND4842L, and ND4842M (all Pre Serial # GA1587914).
Always verify the rating plate on your fireplace chassis to confirm your exact model number and serial number before ordering replacement parts.
Replacing a direct-vent gas pilot assembly requires standard hand tools, patience, and careful attention to fuel safety. Always turn off the main gas supply valve leading to the fireplace before loosening any mechanical fasteners or pilot tubing nuts.
Take reference photographs of the existing wiring routes, thermopile wire terminals, and thermocouple valve connections before removal. Ensure the pilot tubing is not kinked during installation and that sensor leads are routed away from direct main burner flame impingement.
Perform a thorough bubble leak test on all gas line connections using an approved non-corrosive gas leak detection fluid prior to reassembling the fireplace firebox glass. Routine maintenance should include gently brushing dust and lint away from the pilot air intake holes to maintain an active, blue pilot flame.
Pros
- Complete pre-wired kit includes the blower, grounded power cord, variable speed dial, and thermal switch
- Magnetic thermostat automates operation by sensing firebox heat without manual toggling
- High-temperature Class H motor insulation resists temperatures up to 392 degrees Fahrenheit
- Included vibration-damping foam pads help isolate motor sound from the sheet metal fireplace chassis
Cons
- Requires an existing 120V electrical receptacle inside the fireplace lower compartment
- Restricted compartment spaces can make maneuvering the blower and wiring harness tight during installation
- Compatibility is restricted to specific Heatilator, Novus, and cross-referenced models rather than being a universal fit
The Criditpid GFK21 Blower Fan Kit is a specialized replacement component designed for homeowners who want to improve warm-air circulation from specific Heatilator gas fireplaces. Unassisted gas fireplaces often radiate significant heat directly in front of the glass while leaving substantial warmth trapped within the metal outer firebox cabinet. This aftermarket blower assembly draws cooler air from the base of the fireplace, pulls it along the heated rear exterior of the combustion chamber, and distributes it back into the living area.
Air movement is driven by a 3,000 RPM motor rated for 80 CFM of airflow, which provides steady convective movement on a low 35-watt draw at 120 volts. While a blower fan does not raise the burner's total BTU output, it makes heat transfer into the room noticeably faster and more uniform. The kit includes a magnetic thermostat designed to close its circuit around 120 degrees Fahrenheit and disconnect when temperatures decline to 90 degrees Fahrenheit, allowing the fan to cycle on and off automatically as the fireplace heats up and cools down.
Operating inside a hot fireplace enclosure demands thermal protection, and this unit features Class H motor insulation rated up to 392 degrees Fahrenheit. The compact casing measures 7.5 inches long, 3.73 inches wide, and 3.23 inches high, with a 4.76-inch air discharge opening designed to align with factory Heatilator air channels. To minimize operational resonance against the sheet metal casing, the manufacturer includes double-sided foam pads and hook-and-loop fasteners to isolate the blower housing from the floor of the fireplace cavity.
Electrical hookup is straightforward for fireplaces that already possess a bottom junction box. The included 83-inch power cord uses a standard three-prong plug, and the kit includes a separate rheostat controller that lets users dial motor speed up or down to achieve the desired balance between warm airflow and motor sound. Placement generally involves sliding the blower into the lower access cavity, sticking the magnetic thermostat switch directly onto the underside or back of the steel firebox, and securing the rheostat dial along the lower controls panel.
Buyers should confirm physical space and model matching before ordering. This fan is built to match specific Heatilator designations such as the NDV3630, GNDC30, EDV3633, and Novus 30 series, along with part numbers GFK21, GFK21A, GFK21B, FK21, and Rotom HB-RB21K. If your fireplace lacks an existing powered 120V outlet beneath the burner pan, electrical work will be required before this blower can operate.
For owners of compatible Heatilator hearths with a noisy or failed original blower, the Criditpid GFK21 kit serves as an accessible, direct-fit replacement. Its combination of automatic thermal switching, manual speed adjustment, and heat-resistant construction makes it a sensible investment for maximizing comfort from an existing gas hearth.
This blower kit is designed to replace factory blowers across an extensive list of Heatilator gas fireplace models. Supported models include EDV3633, EDV3633I, EDV3633IL, GNBC30, GNDC30, GNDH30, GNRC30, GNRC30E, GNRC30L, GNRC30LE, GNRC30LEB, NB3630, NB3630M, NB3630MI, NBV3630, NBV3630I, ND3630, ND3630I, ND3630IL, ND3630L, ND3630M, ND3630MI, NDV3630, NDV3630I, NDV3630IL, NDV3630L, NEVO3630, NEVO3630I, NEVO4236, NEVO4236I, NNXT3933, NNXT3933I, and NNXT3933IL, as well as the Novus 30 series.
Cross-referenced part numbers supported by this blower kit include GFK21, FK21, GFK21A, GFK21B, Rotom HB-RB21K, R7-RB21K, Security UZY3, and GA3450TA. Always locate the rating plate inside your fireplace lower access panel to confirm your model number before ordering.
Overall blower dimensions measure 7.5 inches in length, 3.73 inches in width, and 3.23 inches in height, featuring an air discharge length of 4.76 inches. The electric motor operates at 3,000 RPM, producing a rated airflow capacity of 80 CFM.
The unit runs on 120V alternating current at 60 Hz with a rated power consumption of 35 watts. Motor insulation conforms to Class H specifications rated up to 392 degrees Fahrenheit. Thermal management is handled by an included magnetic snap switch calibrated to turn the fan on at 120 degrees Fahrenheit and cut power once temperatures drop to 90 degrees Fahrenheit.
Installation takes place entirely through the lower access louver or panel beneath the fireplace firebox. The assembly connects using an 83-inch three-prong grounded power cord that plugs into the factory 120V outlet located within the fireplace cabinet.
Double-sided foam adhesive strips are included to mount the blower directly to the fireplace base, isolating vibration and preventing the unit from shifting. The magnetic thermostat attaches directly to the metal firebox surface where it can accurately read temperature shifts, and the rheostat dial mounts along the bottom control panel for convenient speed adjustments.
Helpful Answers for Heatilator Novus B Vent Fireplaces Owners
How do you identify the exact model number for replacement parts on Heatilator Novus B Vent Fireplaces?
Look at the metal rating plate attached to the inside sheet metal wall of your firebox or behind the lower control louvers. This tag lists the exact model number, serial number, and factory fuel rating. Manufacturers change valve and pilot assemblies across production serial cutoffs, so verifying this tag prevents costly ordering mistakes. Avoid estimating your model based on rough frame measurements alone.
Can you install an aftermarket blower fan kit on Heatilator Novus B Vent Fireplaces?
Yes, compatible blower kits like the GFK21 or universal blowers like the AC Infinity AIRBLAZE S10 install easily if your fireplace has a lower fan cavity and a 120-volt outlet. These blowers pull cooler room air from below the firebox and push warmed air back into your living area. Kits with magnetic thermostats automatically turn the fan on at 120 degrees Fahrenheit and shut off at 90 degrees.
Are natural gas and liquid propane pilot assemblies interchangeable on these fireplaces?
No, natural gas and propane pilot assemblies use distinct orifice sizes and cannot be swapped without proper fuel conversion. Using the wrong fuel pilot creates improper combustion, soot buildup, and ignition failure. Replacement pilot kits specify exact fuel types and typically bundle the thermocouple, thermopile, and electrode. Always confirm your gas supply before buying components, just as you would when installing other vented gas fireplaces.
What distinguishes B-vent gas fireplaces from direct-vent models?
B-vent fireplaces use indoor room air for combustion and exhaust flue gases vertically through a dedicated pipe, while direct-vent units use a sealed pipe pulling outside air. Because natural draft B-vent units draw indoor air, they must not use sealed glass assemblies designed for direct-vent enclosures. Understanding your venting setup ensures you order compatible glass door sets, valves, and maintenance hardware designed specifically for your system type.
Why won’t the pilot light stay lit on a Heatilator Novus fireplace?
A failing thermocouple or weak thermopile is typically why a millivolt pilot goes out once the control knob is released. The thermocouple generates millivolts when heated by the pilot flame, signaling the gas valve to stay open. If the sensor degrades, carbon coats the tip, or the pilot flame drifts, the safety valve immediately shuts down gas flow. Installing a fresh pilot assembly usually solves persistent dropout issues.


Write Your Review
No reviews yet. Be the first to share your experience!