Ages 18-24? Explore Prime for Young Adults and see if you are eligible

Connecting two adjoining living spaces with a shared see-through hearth requires careful planning around wall framing depth, combustible clearances, and exterior exhaust pathways. Installing double sided direct vent gas fireplaces allows homeowners to establish an eye-catching focal point while exhausting combustion byproducts outside through a sealed coaxial pipe system. While standard single-room units like a linear direct-vent gas fireplace radiate heat into one enclosed zone, see-through layouts distribute visual warmth across two distinct living areas simultaneously. Homeowners must evaluate whether their structural layout accommodates dedicated horizontal or vertical pipe runs or if a vent-free insert better serves their heating needs.

Fuel compatibility remains equally critical because gas burners must strictly match available natural gas lines or liquid propane tanks without unauthorized modifications. Evaluating traditional built-in gas fireplaces can help clarify required BTU capacities and draft management before cutting into interior wall partitions. Proper planning prevents unwanted drafts, ensures adequate combustion air intake, and preserves safe operating conditions across both connecting rooms for years to come.

1
Best Seller

Empire Comfort Systems DVVK4TSP Direct Vent

Empire Comfort Systems
9.9 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The Empire DVVK4TSP is a dedicated steel direct-vent fireplace vent kit engineered for top-vent, through-wall exhaust on compatible Empire gas heating appliances. It serves homeowners, remodelers, and installers who need a manufacturer-tailored venting route for safe exterior wall termination.
Pros & Cons

Pros

  • Direct compatibility with designated Empire top-vent appliances
  • Sturdy steel construction built for long-term venting duty
  • Simplifies through-wall horizontal vent routing for remodelers and builders
  • Lightweight 12-pound kit format facilitates easier staging and placement

Cons

  • Specific to compatible Empire models and not intended as a universal venting solution
  • Designed strictly for top-vent through-wall paths, excluding vertical roof venting runs
  • Requires verifying wall thickness, clearances, and local gas venting codes prior to purchase
Detailed Review

The Empire DVVK4TSP Direct Vent Fireplace Vent Kit is a specialized venting component package designed specifically for through-the-wall horizontal termination on compatible Empire gas heating appliances. Homeowners and remodelers adding or replacing a direct-vent Empire gas fireplace often encounter strict venting requirements that demand matched components. This kit provides the dedicated hardware needed to route flue gases safely outside while drawing fresh combustion air from outdoors through a sealed top-vent setup.

Venting performance in direct-vent gas systems depends entirely on reliable air intake and balanced exhaust draft. The DVVK4TSP supports proper appliance operation by establishing a stable, sealed passage through an exterior wall. Because direct-vent systems isolate indoor living areas from combustion byproducts, using a manufacturer-tailored venting solution like this kit helps maintain appliance efficiency and proper indoor air safety.

Constructed from durable steel, the kit is designed to withstand high exhaust temperatures and exterior exposure. The steel material provides rigid structural integrity, reducing the risk of sagging or warping along the horizontal wall penetration. With a total weight of 12 pounds, the assembly remains substantial enough for durable service while staying easy to stage and handle during installation.

Planning your installation requires careful review of dimensions and wall construction. The kit components arrive in a 15 x 17 x 21-inch package, designed to align with the top-exit exhaust collar of compatible Empire units. Because through-wall runs require exact wall thimble positioning, minimum clearances to combustible materials, and specific exterior termination clearances, matching this kit to your building envelope is essential before cutting into framing or exterior siding.

The primary limitation of the Empire DVVK4TSP is its specialized application. It is not a universal venting kit for other fireplace brands, nor is it configured for vertical roof terminations. Homeowners must check their specific Empire fireplace manual to verify model compatibility, permissible horizontal vent lengths, and wall-thickness limitations before ordering.

For homeowners and contractors installing a compatible top-vent Empire gas fireplace with a direct exterior wall path, the DVVK4TSP provides a secure, purpose-built venting pathway. Verifying your appliance model number and framing thickness ensures a clean, code-compliant install that delivers reliable venting performance.

Installation & Compatibility

Compatibility for the Empire DVVK4TSP depends on your exact appliance model and wall layout. This kit is engineered exclusively for Empire Comfort Systems appliances that support a top-exit horizontal venting configuration. Always consult the venting section of your fireplace installation manual to verify that the DVVK4TSP is listed as an approved venting accessory for your specific model number.

Direct-vent gas systems require strict adherence to local mechanical codes, framing clearances, and manufacturer-specified horizontal run limits. Installing this kit requires proper framing of the wall pass-through, sealing against exterior weather penetration, and maintaining clearances away from windows, doors, and walkways. Professional installation by a licensed gas fitter or qualified fireplace technician is strongly recommended to ensure safe combustion airflow and proper exterior termination.

2
Editor's Pick

Duluth Forge FDI32R Dual Fuel Ventless Gas

Duluth Forge
9.9 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The Duluth Forge FDI32R is a 32,000 BTU dual-fuel ventless gas fireplace insert that operates on either natural gas or liquid propane without requiring an exterior chimney or flue. It is an ideal heating solution for homeowners and remodelers looking to heat spaces up to 1,500 square feet with realistic ceramic fiber logs and convenient remote operation.
Pros & Cons

Pros

  • Patented dual-fuel capability provides the flexibility to connect to natural gas or liquid propane lines
  • Potent 32,000 BTU output easily supplements heat across large rooms and open floor plans up to 1,500 square feet
  • Zero-clearance enclosure simplifies custom built-in framing and mantel installations
  • Complete hearth package includes nine ceramic fiber logs, iron grate, protective mesh screen, and remote control

Cons

  • Ventless gas appliances are restricted by local building codes in select states, municipalities, and specific rooms
  • Flame height modulation is manual at the unit rather than adjustable directly through the remote control
  • Substantial 88.2-pound chassis and dedicated gas line requirements require planned installation and professional gas fitting
Detailed Review

The Duluth Forge FDI32R Dual Fuel Ventless Gas Fireplace Insert is designed for homeowners and remodelers seeking dependable supplemental heat and traditional hearth ambiance without the expense of building a chimney. Rated at 32,000 BTUs, this vent-free gas unit delivers heat directly into living rooms, finished basements, or open-concept living areas up to 1,500 square feet. By utilizing patented dual-fuel technology, the insert gives buyers the flexibility to connect either to a residential natural gas supply line or to a dedicated liquid propane tank setup.

Heat delivery is exceptionally effective because the ventless design prevents warm air from escaping through an exterior exhaust pipe or chimney. The manufacturer lists the unit at 99.9% heating efficiency, maximizing fuel value inside the home. A standing pilot system supports the included LCD remote control, allowing users to cycle the main burner on or off from across the room. While the remote manages ignition cycling, flame height adjustment is handled manually via the unit control knob, providing direct tactile control over fuel consumption and heat output.

Construction quality focuses on durability and authentic visual design, centered around a zero-clearance steel firebox with a black finish. Inside the hearth, nine hand-painted ceramic fiber faux logs rest on an iron grate to emulate split firewood. A fine mesh screen fronts the firebox, shielding the burner assembly while preserving an unobstructed view of the flame. The zero-clearance firebox design means the chassis can be installed directly against framing or recessed into walls and custom mantels where a gas supply is present.

Installation planning requires close attention to manufacturer clearances and rough dimensions. The chassis measures 36.38 inches wide, 33.27 inches high, and 18.38 inches deep, with a total weight of 88.2 pounds. A critical safety specification requires at least 42 inches of vertical clearance from the top of the firebox to the ceiling. Because ignition relies on a battery-powered push-button Piezo system and the receiver operates on batteries, the fireplace does not require a hardwired 120-volt household electrical circuit to generate heat.

Potential buyers must verify municipal codes and local regulations prior to purchase, as vent-free gas appliances are restricted or prohibited in certain jurisdictions, as well as in confined rooms like bedrooms or bathrooms. Because ventless combustion releases moisture and combustion byproducts directly into indoor air, proper room volume and adequate ventilation are essential. Proper gas line sizing and leak testing are required, making professional installation by a certified gas technician the safest approach.

Overall, the Duluth Forge FDI32R is a practical choice for anyone seeking high-output supplemental heating without the architectural footprint of an exterior flue. For households with appropriate room volume, verified code compliance, and proper ceiling clearances, this insert combines dual-fuel versatility, substantial 32,000 BTU output, and classic fireplace styling in a single package.

Fuel & Venting

The Duluth Forge FDI32R utilizes patented dual-fuel technology, allowing the appliance to operate on either natural gas or liquid propane without purchasing separate conversion kits. This feature provides flexibility whether your home connects to municipal gas lines or relies on propane tanks.

As a ventless heating appliance, this unit does not require a chimney, flue pipe, or exterior ductwork. All heat generated remains inside the living area, which supports the manufacturer-listed 99.9% heating efficiency rating. However, buyers must verify that vent-free appliances are permitted under their local municipal building codes and state regulations before ordering.

Fit & Dimensions

The exterior chassis measures 36.38 inches in width, 33.27 inches in height, and 18.38 inches in depth, weighing 88.2 pounds. These dimensions make it suitable for spacious fireplace openings or purpose-built zero-clearance wall enclosures.

The zero-clearance firebox rating allows the unit to be recessed directly into wall framing accessible to a gas supply line. The manufacturer mandates a minimum clearance of 42 inches from the top of the fireplace insert to the ceiling to ensure safe heat dissipation.

Remote & Controls

The fireplace insert features a battery-operated push-button Piezo ignition system that lights the standing pilot reliably without requiring connection to your home electrical grid. This ensures heating capability even during household power outages.

An included handheld remote control features an LCD screen and manages burner on and off functions remotely. Fine-tuning flame height is managed manually via the control knob located on the insert firebox.

3
Limited Time

Krysolad 4" x 6-5/8" 46DVA-HC Horizontal Square

Krysolad
9.6 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The Krysolad 46DVA-HC Horizontal Square Termination is a galvanized steel exterior vent cap designed for 4-inch inner by 6-5/8-inch outer coaxial direct-vent gas appliances. It provides a weather- and pest-resistant through-the-wall exhaust exit for homeowners, remodelers, and gas fireplace owners needing a durable horizontal termination.
Pros & Cons

Pros

  • Specifically sized for 4-inch exhaust and 6-5/8-inch intake coaxial direct-vent setups
  • Durable 0.04-inch galvanized steel body with seamless molding resists corrosion and temperature shifts
  • Pre-drilled 12-hole mounting flange and included hardware streamline exterior wall installation
  • Effective internal barrier helps prevent pest intrusion and moisture penetration into the venting run

Cons

  • Only fits 4-inch inner by 6-5/8-inch outer coaxial direct-vent systems, not single-wall or B-vent pipes
  • Requires separate purchase of wall thimbles, interior wall pass-through components, and venting pipes
  • Demands careful verification of fireplace manufacturer clearance-to-combustible standards before mounting
Detailed Review

The Krysolad 46DVA-HC Horizontal Square Termination Cap is a specialized exterior wall termination engineered for direct-vent gas fireplaces, freestanding gas stoves, and sealed-burner wall furnaces. Sized to mate with standard coaxial piping that features a 4-inch inner exhaust flue and a 6.5-inch outer air intake opening, this component serves as the final exterior exhaust point for through-the-wall venting paths. It is an ideal replacement or new-build component for homeowners and remodelers running a direct-vent gas appliance horizontally through an exterior framed or masonry wall.

Functioning at the terminal end of a balanced-flue gas setup, the cap allows the appliance to draw outside combustion air through the outer sleeve while simultaneously venting combustion byproducts outward through the inner core. This coaxial approach prevents indoor air consumption while safeguarding burner operation from unpredictable outdoor drafts. The hood structure creates an effective physical barrier that deters driving rain, blowing snow, and small animals or insects from obstructing the flue pathway, reducing maintenance headaches over time.

Build quality centers around 0.04-inch thickened galvanized sheet steel, providing solid resistance against physical impacts and outdoor corrosion. Krysolad uses an integrated molding method without welded seams, eliminating common failure points that often degrade under repeated thermal expansion and contraction. The unit is finished in a protective black coating that blends cleanly into standard home sidings while enduring harsh seasonal exposure from sub-zero winter temperatures to blistering summer heat.

Physical measurements for the cap face run approximately 13.5 by 13.5 inches with a depth profile of roughly 12.6 inches, fitting neatly on most exterior home walls. The mounting flange includes 12 pre-drilled holes, spaced three per side, featuring enlarged cutouts that make positioning straightforward even when working on uneven wall textures. Krysolad supplies the necessary mounting screws, though proper exterior installation still requires a suitable wall thimble and exterior-grade high-temperature sealant to prevent air and moisture infiltration behind the siding.

Buyers must recognize clear compatibility limits before ordering. This termination is designed solely for coaxial direct-vent gas configurations measuring 4 inches inside and approximately 6-5/8 inches outside. It cannot be used on B-vent gas lines, pellet stove pipes, wood-burning flues, or unvented systems. Furthermore, homeowners must verify their specific appliance manual for required clearances away from openable windows, doors, interior building corners, and combustible soffits to ensure local mechanical code compliance.

For owners of direct-vent gas appliances planning a horizontal wall exhaust run, the Krysolad 46DVA-HC termination cap delivers dependable sheet-metal protection at an accessible price point. Its heavy-gauge galvanized construction, seamless design, and included mounting hardware make it a practical solution for completing a weather-tight, functional fireplace exhaust system.

Fit & Dimensions

The exterior square face measures approximately 13.5 inches wide by 13.5 inches tall with an overall depth of 12.6 inches (overall packaged dimensions are listed at 14.3 x 14.3 x 10.5 inches). The connection collar is designed for coaxial venting systems, matching a 4-inch inner exhaust diameter and a 6.5-inch outer air intake diameter. Always confirm that your specific gas fireplace or stove pipe matches these nominal 4-inch by 6-5/8-inch coaxial direct-vent dimensions prior to purchase.

Installation & Mounting

The termination is intended exclusively for through-the-wall horizontal venting runs. It features a perimeter flange with 12 pre-drilled, enlarged mounting holes (three per side) and includes a dedicated mounting screw set for securing the cap to exterior wall sheathing or siding. Installation requires a properly framed wall opening, a manufacturer-approved wall thimble, and high-temperature exterior sealant to ensure weatherproofing and adequate clearances from combustible materials.

Build Quality

Constructed from 0.04-inch thickened galvanized steel, this termination cap utilizes an integrated molding process without vulnerable weld points. The seamless design ensures high structural stability and resistance to thermal stress caused by hot exhaust gases and cold outside air. Its protective black finish shields the galvanized substrate from rust, UV degradation, and moisture damage in residential, commercial, or light-industrial environments.

4
Top Rated

Duluth Forge Ventless Liquid Propane Gas Fireplace

Duluth Forge
9.6 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The Duluth Forge Liquid Propane Ventless Gas Fireplace Insert delivers up to 26,000 BTUs of thermostatically controlled warmth for spaces up to 1,350 square feet without requiring a chimney. It is an ideal pick for remodelers and homeowners looking to build a custom fireplace surround or add powerful supplemental propane heat without ductwork.
Pros & Cons

Pros

  • Delivers strong supplemental heat up to 26,000 BTUs for large living rooms and open floor plans.
  • Zero-clearance design allows versatile installation into recessed walls or custom mantel cabinets.
  • Thermostat control automatically maintains target comfort levels while conserving fuel.
  • Requires no chimney or venting, directing heat directly into the living space at 99.9% efficiency.
  • Battery-assisted Piezo igniter operates independently of household electrical power during outages.

Cons

  • Configured specifically for liquid propane and cannot be connected to natural gas lines.
  • Ventless gas appliances are subject to regional building code restrictions in certain U.S. jurisdictions.
  • Rough framing opening specifications and gas line clearances must be verified in the installation manual before construction.
Detailed Review

The Duluth Forge Liquid Propane Ventless Gas Fireplace Insert is a zero-clearance firebox engineered for homeowners, remodelers, and cabin owners seeking robust supplemental heating without the structural burden of a chimney or exterior venting. Designed to operate strictly on liquid propane, this insert serves as an attractive centerpiece for a newly framed living room wall or can be paired with an aftermarket face mantel cabinet. If you want to create a traditional hearth look in a space lacking existing fireplace infrastructure, this standalone ventless insert provides a practical, self-contained solution.

In terms of heating capability, the unit generates up to 26,000 BTUs of heat, which the manufacturer rates to warm areas up to 1,350 square feet. Because it utilizes vent-free technology, 99.9 percent of the heat produced stays directly in the living space rather than escaping out an exhaust pipe. The interior features a dual precision-ported burner that delivers full-bodied yellow flames across five hand-painted ceramic fiber logs. Temperature management is handled by a built-in thermostat control that automatically turns the burner on and off to maintain a consistent room temperature, while a battery-assisted Piezo ignition system ensures quick start-ups even during grid power outages.

The firebox construction emphasizes clean integration and durability, weighing 47.6 pounds and measuring 29.1 inches wide, 13.9 inches deep, and 23.9 inches high. Its zero-clearance design classification allows the outer firebox shell to be recessed directly against standard framing materials, reducing the complexity of custom wall builds or built-in media surrounds. The included ceramic fiber logs are individually detailed to replicate natural split firewood, resting securely over the dual burner to establish a balanced, realistic flame pattern without visible artificial burner hardware.

Installing this unit requires a dedicated liquid propane supply line and careful adherence to clearance specifications outlined in the manufacturer documentation. Because the firebox relies on battery-powered Piezo ignition, it does not demand an electrical wall outlet or complex wiring, simplifying placement in basement retreats, open-concept living rooms, or vacation cabins. Essential safety features include a built-in Oxygen Depletion Sensor (ODS) paired with an automatic shut-off mechanism that continuously samples indoor oxygen levels and turns off the gas supply if levels fall below safe operating thresholds.

Prospective buyers should keep several practical limitations in mind before ordering. Ventless gas heating equipment is subject to strict local building codes and state regulations, which may prohibit vent-free appliances in specific rooms such as bedrooms or in certain geographic jurisdictions. Additionally, the unit is configured exclusively for liquid propane and cannot be connected to natural gas without explicit factory-approved hardware. The overall listed dimensions represent the exterior chassis, so builders must verify exact rough opening requirements, minimum hearth clearances, and gas line hookup positions prior to framing.

For homeowners with an active propane supply who need effective zone heating for large living spaces, the Duluth Forge 26,000 BTU Ventless Insert offers a strong blend of heating capacity, autonomous thermostat operation, and aesthetic appeal. Its zero-clearance flexibility makes it a compelling choice for custom mantel projects or recessed accent walls, provided local building codes permit ventless gas appliances in your intended installation space.

Fit & Installation

The Duluth Forge fireplace insert measures 29.1 inches wide, 13.9 inches deep, and 23.9 inches high with an overall weight of 47.6 pounds. Because it features a zero-clearance firebox, it can be framed directly into a recessed drywall opening or fitted within an appropriate fireplace mantel cabinet.

Installers must verify exact framing cutout dimensions, combustible material clearances, and gas line intake locations using the official installation manual before building wall cavities or installing surrounds.

Fuel & Venting

This fireplace insert is factory-configured for liquid propane (LP) only and requires a dedicated propane gas supply line. It should not be connected to a natural gas line without explicit manufacturer documentation and authorized conversion components.

Operating as a vent-free appliance, the system requires no chimney, flue, or exterior venting pipes. Prospective buyers should check local municipal building codes and regional regulations, as ventless gas appliances have specific room-volume guidelines and geographic restrictions.

Heating & Controls

With a maximum output of 26,000 BTUs, this insert provides supplemental zone heat rated by the manufacturer for living spaces up to 1,350 square feet at 99.9 percent thermal efficiency.

The integrated smart thermostat control cycles the burner on and off to maintain steady ambient temperatures. A battery-assisted Piezo push-button ignition allows the firebox to ignite reliably without relying on household 120-volt electrical power.

5

Duluth Forge FDSR25 Dual Fuel Ventless Gas Stove

Duluth Forge
9.6 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The Duluth Forge FDSR25 is a freestanding ventless gas stove delivering up to 26,000 BTU of supplemental heat for spaces up to 1,200 square feet using natural gas or liquid propane. It is an ideal pick for homeowners seeking an efficient, chimney-free zone heater equipped with a remote thermostat and realistic ceramic logs.
Pros & Cons

Pros

  • Patented dual-fuel technology provides total flexibility for natural gas or propane hookups
  • Strong 26,000 BTU heating capacity warms expansive rooms up to 1,200 square feet
  • Included thermostat remote allows precise ambient temperature control from across the room
  • Integrated pilot oxygen depletion sensor (ODS) immediately cuts gas if low oxygen or carbon monoxide is detected

Cons

  • Ventless gas appliances are subject to regional building codes and may be restricted in certain jurisdictions or rooms
  • Substantial 80-pound overall weight requires two people to unbox and position safely
  • Requires professional gas plumbing and leak testing to verify proper fuel line pressure and safety
Detailed Review

The Duluth Forge FDSR25 Dual Fuel Ventless Gas Stove is a freestanding heating appliance engineered to deliver supplemental warmth across spaces up to 1,200 square feet without the necessity of a chimney or venting pipe. Finished in a clean matte black, this stove blends traditional stove styling with modern burner mechanics. It is designed specifically for homeowners who have access to a gas supply line and want a robust, zone-heating solution for family rooms, living areas, or finished basements.

A standout operational feature is the patented dual-fuel technology, which allows the precision-ported burner to run on either natural gas or liquid propane. Delivering up to 26,000 BTU, the stove operates at a listed 99.9% efficiency, meaning nearly all the heat produced stays in the room rather than escaping through a flue. The included thermostat remote control actively monitors room temperature, cycling the heat output to maintain a comfortable setpoint without requiring manual knob adjustments on the stove chassis.

The build quality reflects heavy-duty craftsmanship, featuring an 80-pound metal cabinet that sits securely on four integrated legs. Behind the open viewing area, the firebox showcases six hand-painted ceramic fiber logs that withstand high operational heat while radiating warmth forward. The log arrangement complements the blue-flame burner system, creating an appealing visual display that adds warmth and character to living spaces.

Setting up the stove requires allocating a footprint of 16 inches deep, 28 inches wide, and 26 inches high, while ensuring appropriate clearance from combustible walls, drapery, and furniture. Starting the fire is straightforward thanks to a battery-assisted piezo ignition system, which uses the included batteries to generate a reliable pilot spark. Because it operates on pressurized fuel, installation should be handled by a qualified gas technician to connect the supply, verify inlet pressure, and test for leaks.

Prospective buyers must consider regional building regulations, as vent-free gas appliances are restricted or prohibited in select cities, states, and specific bedroom spaces. In addition, ventless heaters release trace combustion moisture and byproducts indoors, requiring adequate room volume and appropriate air exchange. The stove is also quite heavy at 80 pounds, so placement planning is essential before final gas line hookup.

For homeowners who are legally permitted to install vent-free appliances and seek a high-efficiency heater, the Duluth Forge FDSR25 represents a dependable, full-featured choice. With dual-fuel capability, 26,000 BTU of heating performance, built-in oxygen depletion shutoff protection, and a convenient remote thermostat, it delivers consistent comfort for large living spaces.

Fuel & Venting

The Duluth Forge FDSR25 features patented dual-fuel engineering that allows the unit to burn either natural gas or liquid propane. This provides practical adaptability whether your home is plumbed for municipal natural gas or relies on an external propane tank.

Operating as a vent-free appliance, this stove releases no heat through an exhaust chimney, resulting in a listed 99.9% energy efficiency. Buyers must check local municipal codes and guidelines prior to purchase, as ventless gas heaters are subject to strict regional regulations and room-size requirements.

Safety Features

Safety is anchored by an integrated Oxygen Depletion Sensor (ODS) built directly into the pilot assembly. If the sensor detects reduced oxygen levels or elevated carbon monoxide in the surrounding room, it immediately shuts down gas flow to the burner.

The unit also incorporates a reliable battery-assisted piezo ignition system that requires no external electrical outlet. Proper clearance from combustibles and periodic inspection of gas line connections ensure dependable, worry-free operation over the lifespan of the stove.

6

Ashley Hearth DVAG17N 17,000 BTU Direct-Vent

Ashley
9.5 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The Ashley Hearth DVAG17N is a 17,000 BTU direct-vent natural gas wall heater engineered to warm spaces up to 570 square feet without using electricity. It is an ideal supplemental heating solution for homeowners, cabin owners, and mobile home residents who need reliable heat during power outages.
Pros & Cons

Pros

  • Fully functional during electrical grid outages thanks to battery-powered manual ignition and non-electric gas valve
  • Sealed direct-vent system keeps combustion byproducts outside rather than venting into the living space
  • Ships with a dedicated wall mounting bracket and complete exterior-wall venting kit in the box
  • Approved for use in USA mobile homes, residential homes, cabins, and enclosed workshops
  • Built-in internal thermostat provides automated temperature regulation without needing an external wall thermostat

Cons

  • Requires mounting to an exterior wall to accommodate the through-the-wall direct-vent pipe system
  • Factory-configured strictly for natural gas, with no propane conversion components included in the data
  • Circulates heat solely through natural convection unless the optional electric blower (model DVB17) is bought separately
Detailed Review

The Ashley Hearth DVAG17N is a direct-vent natural gas wall heater engineered for supplemental zone heating in residential living spaces, cabins, garages, and mobile homes. Generating up to 17,000 BTUs of heat, the unit is rated by the manufacturer to warm spaces up to 570 square feet. It is especially suited for property owners, cabin dwellers, and rural residents who require dependable heat that functions completely independent of the municipal electrical grid.

Reliable operation during power outages is one of the primary functional advantages of this direct-vent unit. Ignition is powered by a single AA battery included in the package, eliminating the need for matches or a 120-volt wall outlet. Once the pilot flame is engaged, an integrated internal thermostat regulates the burner cycle based on the heat level chosen on the top control knob. Heat distributes naturally across the room via convection, though an optional electric blower accessory (model DVB17) can be purchased separately for forced-air circulation when household power is active.

Construction centers around a durable white steel cabinet measuring 6.75 inches deep, 17.75 inches wide, and 20 inches tall, with an overall weight of roughly 54.4 pounds. A key safety and environmental attribute is the sealed combustion direct-vent design. Unlike vent-free heaters that release combustion moisture and exhaust into the living area, this system draws fresh intake air from outside the building and vents exhaust outdoors through a dedicated through-the-wall assembly.

Installing the DVAG17N requires mounting the steel chassis directly against an exterior wall to accommodate the venting run. Ashley Hearth includes a dedicated mounting bracket alongside a complete through-the-wall vent kit consisting of a vent pipe, air intake pipe, heat shield, flashing, exterior cap, and connecting rod. Because the appliance ties directly into a residential natural gas supply line and requires a weather-tight exterior wall penetration, professional gas-fitting installation is recommended to guarantee proper gas pressure and local building code adherence.

Potential buyers must verify their available fuel source and installation location prior to ordering. The DVAG17N is designed specifically for natural gas, and product specifications do not indicate propane compatibility or include a field-conversion kit. Additionally, while the unit is approved for mobile home installations within the United States, clearance to combustible walls, furniture, and flooring must be confirmed in the manufacturer manual before mounting.

For homeowners, cabin operators, or workshop owners seeking efficient supplemental warmth that will not quit when winter storms disrupt local power lines, the Ashley Hearth DVAG17N delivers substantial value. Its sealed direct-vent exhaust preserves indoor air freshness, while the included venting components simplify the procurement process for a complete exterior-wall heating setup.

Fuel & Venting

The Ashley Hearth DVAG17N is engineered strictly for natural gas fuel systems and operates with a sealed-combustion direct-vent configuration. Direct venting brings outside air into the sealed burner chamber for combustion and discharges exhaust gases directly outdoors, preventing indoor air contamination and eliminating moisture buildup often associated with vent-free heaters.

The manufacturer includes a standard venting kit in the box, featuring a vent pipe, air intake pipe, heat shield, exterior wall flashing, termination cap, and connecting rod. Users should note that this unit is factory-set for natural gas, so buyers requiring liquid propane must verify alternative models or check with the manufacturer regarding certified conversion options before purchasing.

Installation & Mounting

Designed for exterior-wall placement, the DVAG17N features a compact footprint measuring 6.75 inches deep, 17.75 inches wide, and 20 inches high. The package includes a factory wall mounting bracket to secure the 54.4-pound steel cabinet cleanly against finished wall surfaces.

Because the direct-vent pipe assembly must penetrate directly through an exterior wall, buyers should ensure the designated wall section is free of hidden electrical wiring, plumbing, or structural obstructions. Connecting the unit to the natural gas supply line requires strict compliance with local plumbing codes and manufacturer combustible clearance instructions.

7

Duluth Forge Dual Fuel Ventless Gas Fireplace

Duluth Forge
9.5 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The Duluth Forge FDF400RT-ZC is a 32,000 BTU ventless gas fireplace insert engineered to run on either natural gas or liquid propane, heating spaces up to 1,500 square feet without a chimney. It is an ideal fit for remodelers and homeowners seeking high-efficiency supplemental heat with zero-clearance installation flexibility and convenient remote burner control.
Pros & Cons

Pros

  • Dual-fuel system supports both natural gas and liquid propane connections out of the box
  • Zero-clearance firebox framing simplifies recessing into walls or existing openings
  • Ventless 99.9% efficiency keeps all generated heat inside the living area without chimney draft loss
  • Complete set includes remote control, 6 ceramic logs, iron grate, and protective mesh double doors

Cons

  • Ventless gas appliances are subject to regional building code restrictions and room ventilation requirements
  • Remote control handles burner on/off cycling while flame height must be adjusted manually on the unit
  • Requires a strict minimum vertical clearance of 42 inches from the top of the firebox to the ceiling
Detailed Review

The Duluth Forge FDF400RT-ZC is a ventless gas fireplace insert engineered to deliver robust supplemental warmth to living rooms, family rooms, and open living spaces. Operating with patented dual-fuel technology, this insert suits homeowners, builders, and remodelers who need the freedom to fuel their hearth with either natural gas or liquid propane. Because it requires no outside flue, ductwork, or masonry chimney, it provides a practical solution for finishing new construction framing or retrofitting an existing fireplace opening where exterior venting is structurally impractical.

Heating performance centers around a 32,000 BTU burner rated at 99.9% fuel efficiency, providing manufacturer-guided heating coverage for areas up to 1,500 square feet. Vent-free operation directs all produced heat directly into the living quarters rather than losing energy through a chimney draft. The system utilizes a standing pilot arrangement paired with push-button Piezo ignition for straightforward starting. Once lit, the included LCD remote control cycles the burner on and off from the comfort of your seat, while flame height can be tuned manually at the control valve.

Aesthetically, the insert delivers classic hearth detailing inside a durable black enclosure weighing 69.5 pounds. The interior firebox features a sprayed brick liner that provides depth behind six hand-painted ceramic fiber logs resting on an iron grate. Protective mesh double doors enclose the front of the unit, creating an authentic fireplace profile while shielding the internal burner assembly. These components are designed to withstand high temperatures and maintain a realistic appearance whether the flame is active or unlit.

Installation is facilitated by the zero-clearance firebox chassis, which measures 29.1 inches wide by 15.6 inches high by 29.5 inches deep. This zero-clearance rating allows the chassis to be built directly into standard wood or metal wall framing or set flush against any wall where a certified gas line can be routed. When laying out the framing, you must maintain at least 42 inches of clearance between the top of the fireplace and the ceiling. Because the pilot and receiver run on battery power (including 1 AAA battery for the remote), the fireplace does not require an electrical outlet connection.

Buyers should account for certain code and operational considerations before choosing this insert. Vent-free appliances are restricted or regulated by municipal codes in certain jurisdictions and are generally not permitted in small, enclosed rooms like standard bedrooms or bathrooms. In addition, while the handheld remote turns the flame on and off, fine adjustments to flame intensity require opening the mesh doors to use the manual knob. Gas line sizing and operating pressure must always be verified by a qualified professional to ensure proper burner combustion.

For homeowners and remodelers looking to add substantial supplemental heat without the heavy expense of exterior venting, the Duluth Forge FDF400RT-ZC offers a dependable, fuel-flexible hearth system. Its zero-clearance firebox, realistic ceramic log set, and high-efficiency dual-fuel burner deliver strong value for open living areas requiring reliable warmth.

Fuel & Venting

The Duluth Forge FDF400RT-ZC features patented dual-fuel technology that allows the unit to run on either Natural Gas or Liquid Propane. This provides flexibility for properties that may transition between municipal natural gas and tank-based propane supplies.

Because it is a ventless design, 99.9% of the fuel consumed is converted directly into room heat without loss through an exhaust flue. Buyers should verify local municipal regulations before purchase, as vent-free gas appliances are subject to specific room size limits and regional building codes.

Installation & Clearances

The zero-clearance firebox is engineered for mounting against or recessing directly into standard wall framing, provided an accessible gas line is available. The exterior chassis measures 29.1 inches wide, 15.6 inches high, and 29.5 inches deep, with a total weight of 69.5 pounds.

Installers must observe the manufacturer requirement of at least 42 inches of vertical clearance between the top of the fireplace insert and the ceiling. Proper gas line connections, pressure checks, and framing clearances should always be handled by a licensed professional.

Remote & Controls

This insert incorporates a standing pilot ignited via a manual push-button Piezo system. Because ignition and flame controls operate independently of household line voltage, the unit can supply supplemental heat during electrical power outages.

An included wireless remote control with an LCD screen pairs with the internal receiver to turn the main burner on and off from across the room. Adjustments to flame height and heat output are handled manually at the control valve behind the mesh double doors.

Frequently Asked Questions

How does venting work for double sided direct vent gas fireplaces?

Direct-vent systems utilize a sealed coaxial pipe that pulls outside air for combustion through an outer chamber while venting exhaust through the inner pipe. This sealed design preserves indoor air quality and eliminates drafts. Proper operation requires certified horizontal wall caps or vertical roof terminations that maintain required clearances from building openings.

Can you convert a double sided direct vent gas fireplace between natural gas and propane?

Fuel conversion requires an official manufacturer-supplied conversion kit matching the specific appliance model. Natural gas and propane operate under different burner pressures and orifice sizes, so improvised changes pose severe hazards. Dual-fuel ventless fireboxes offer flexible fuel configurations, but dedicated direct-vent models require exact factory-specified conversion components.

What framing precautions are essential for see-through gas fireplace installations?

Framing a see-through unit requires constructing an open chase wall that maintains specific non-combustible clearances on both sides. Surrounding wall studs, mantels, and decorative accessories, such as protective burner accessories, must adhere strictly to manufacturer-defined standoff distances to avoid heat damage.

Do direct-vent gas hearth appliances operate during electrical power outages?

Most direct-vent gas fireplaces equipped with standing pilots or battery-assisted Piezo ignition operate without household electricity. Heaters like the Ashley direct-vent wall unit produce steady radiant warmth during outages without grid power. However, optional convection blowers and fan accessories require standard 120-volt electrical power to circulate air.

What is the main difference between direct-vent and ventless gas fireplace systems?

Direct-vent systems exchange air and exhaust completely outdoors through sealed pipes, making them suitable for airtight rooms. Ventless inserts discharge heat directly into the living space at 99.9% efficiency, relying on internal Oxygen Depletion Sensors. Local building codes often restrict ventless installations in certain bedrooms or confined spaces.