Direct-vent gas appliances provide comfortable supplemental heat, but a worn pilot or burner leaves your hearth completely dark. Sourcing an accurate napoleon burner assembly for vittoria fireplace requires close attention to factory specs because gas components are never one-size-fits-all. A faulty pilot tube, damaged thermopile, or corroded burner tube can disrupt fuel delivery and spark ignition instantly. While flue maintenance sometimes involves damper sealing hardware, direct-vent systems rely on a sealed firebox and matched gas pressure. Evaluating your burner configuration beforehand prevents fuel leaks and costly repair delays.
Gas supply differences between natural gas and liquid propane represent the most critical hurdle when replacing parts. An incorrect orifice or mismatched mounting bracket ruins burner operation, causing soot buildup or weak pilot flames that fail to open the main gas valve. Selecting reliable components alongside practical hearth accessories keeps your heating system operating reliably through cold winter snaps. Checking bracket styles, lead wire lengths, and gas connections ensures your direct-vent hearth runs smoothly for years.
Pros
- Direct-fit OEM replacement engineered under Napoleon part number WS-100-38
- Integrated 24-inch lead components allow easy routing to the gas valve manifold
- Factory-configured specifically for direct-vent natural gas applications
- Side-mount bracket matches original equipment mounting locations
Cons
- Configured strictly for natural gas and cannot be used in propane systems without proper conversion
- Requires verifying your specific Napoleon direct-vent fireplace model manual before purchase
- Gas appliance servicing typically requires professional handling for leak checking and safe operation
The Napoleon WS-100-38 Natural Gas Pilot Assembly is an OEM-specified replacement component designed for direct-vent gas fireplaces. Manufactured by Allparts Equipment to meet factory specifications, this pilot assembly is intended for homeowners, landlords, or maintenance technicians working to repair an existing direct-vent Napoleon fireplace that suffers from pilot lighting issues, loose connections, or worn ignition components.
This pilot assembly functions as the critical ignition and flame-sensing source within a natural gas fireplace system. Because it is specifically built for direct-vent natural gas applications, the orifice and burner hood are calibrated for standard natural gas delivery, avoiding the soot buildup or delayed ignition that can happen with mismatched fuel components. It features a side-mount design that positions the pilot flame properly against the main burner for smooth ignition cycles.
Construction details reflect durable black-finished metal housing and components sized to handle the continuous heat of an active direct-vent firebox. The overall package dimensions measure 8 x 2 x 5 inches, and the assembly is fitted with 24-inch components, providing ample reach for routing thermopile, thermocouple, or spark wiring down through the firebox base to the lower control valve area.
Installation requires access to the fireplace burner tray and gas valve manifold. The integrated side bracket aligns with existing screw locations on compatible direct-vent fireboxes, while the 24-inch lead lengths eliminate tension on the wiring during positioning. Working on fuel lines requires turning off the gas supply and ensuring leak-free connections according to the fireplace manufacturer's maintenance procedures.
A key consideration is fuel compatibility. This unit is strictly engineered for natural gas direct-vent fireplaces and is not compatible with liquid propane setups without explicit factory conversion kits. Additionally, because Napoleon produces diverse fireplace series with distinct mounting brackets and lead lengths, buyers should cross-reference part number WS-100-38 with their appliance's original user manual or parts list prior to purchase.
For homeowners maintaining an older or malfunctioning direct-vent Napoleon natural gas fireplace, the WS-100-38 assembly provides a dependable direct-fit solution. Its OEM specifications and pre-sized 24-inch components eliminate guesswork, making it a solid replacement choice to restore reliable seasonal heating and ambiance.
Confirming part numbers is essential before ordering gas fireplace hardware. The WS-100-38 assembly is designed specifically as an OEM replacement for compatible Napoleon direct-vent gas fireplaces. Check your fireplace model rating plate or owner manual to verify that WS-100-38 is listed under the replacement parts diagram.
This pilot assembly features a side-mounting bracket and 24-inch components. If your direct-vent fireplace uses a top-mount pilot bracket or requires longer leads to reach the gas valve, verify fitment against the appliance manufacturer specifications before starting installation.
This pilot assembly is configured exclusively for direct-vent fireplaces fueled by natural gas. Natural gas and liquid propane operate at different manifold pressures and require different orifice sizes, meaning this pilot should never be installed on a propane system without certified conversion equipment.
Because direct-vent fireplaces utilize a sealed combustion chamber, proper pilot alignment and tight sealing around wiring penetrations are critical for maintaining draft integrity and safe combustion.
Pros
- Genuine Napoleon part engineered to match factory side-mount specifications and alignment
- Configured specifically for liquid propane direct-vent fireplace installations
- Complete assembly format simplifies swapping out aging, corroded, or malfunctioning pilot parts
- Restores consistent pilot flame generation and smooth main burner ignition
Cons
- Restricted exclusively to propane gas systems and cannot be used for natural gas configurations
- Requires fireplace owners to verify part number WS-100-39 against their specific model manual prior to purchase
- Gas supply line connection typically requires installation by a qualified service professional
The Napoleon WS-100-39 Propane Gas Pilot Assembly is an authentic replacement part designed specifically for select Napoleon direct-vent gas fireplaces fueled by liquid propane (LP). This complete assembly is intended for homeowners, property managers, and hearth technicians who need to resolve recurring pilot outages, weak ignition flames, or worn thermocouple and thermopile components on an existing side-mounted pilot bracket.
As an essential ignition component, this pilot assembly delivers the steady pilot flame required to safely ignite the main gas burner and energize the millivolt safety circuit. Because the assembly is factory-configured for liquid propane, the internal orifice is sized precisely for propane operating pressures. In sealed direct-vent fireplaces, having an exact-fit pilot assembly is vital for maintaining balanced combustion airflow and dependable flame-sensing operation.
Constructed with durable metal brackets and high-temperature ignition leads, the unit features a classic black bracket finish and measures approximately 8 by 2 by 5 inches with an overall weight of roughly 0.81 pounds. The side-mount design matches designated Napoleon firebox footprints, keeping the pilot hood and flame sensor positioned at the correct angle relative to the burner ports for smooth flame transfer.
Installing this side-mount pilot assembly requires accessing the lower firebox, shutting off the gas supply, and disconnecting the pilot tubing and wiring harnesses from the gas control valve. Because this replacement component connects directly to a pressurized gas line inside a sealed combustion chamber, leak testing is mandatory, and installation by a qualified gas technician or certified hearth professional is strongly recommended.
The main limitation of this assembly is its strict fuel and mounting specificity. It is engineered exclusively for liquid propane direct-vent models and cannot be adapted for natural gas systems without proper manufacturer conversion hardware. Furthermore, the side-mount bracket will not work in Napoleon fireplaces requiring a top-mount or rear-mount pilot bracket. Buyers should inspect their fireplace rating plate and owner manual schematics to verify that part number WS-100-39 matches their appliance requirements.
For owners of compatible Napoleon direct-vent propane fireplaces struggling with ignition failure or an uncooperative pilot flame, the WS-100-39 pilot assembly provides a direct, cost-effective replacement. It restores reliable pilot operation and burner ignition without the expense of replacing the entire fireplace burner assembly.
The Napoleon WS-100-39 is engineered strictly for liquid propane (LP) applications. Propane operates under significantly higher manifold pressure than natural gas and requires a smaller pilot orifice to ensure clean, safe combustion. This assembly should never be connected to a natural gas line.
Direct-vent fireplaces utilize a completely sealed combustion chamber that draws fresh air from outdoors and vents exhaust outside through dedicated venting pipe. Maintaining an exact factory-spec pilot assembly inside this sealed environment ensures that draft pressures remain balanced and the pilot flame does not pull away from the sensor during operation.
Compatibility for the Napoleon WS-100-39 relies on three critical factors: brand, fuel type, and mounting geometry. This component is designed specifically for Napoleon direct-vent gas fireplaces that use liquid propane and call for factory part number WS-100-39.
Before ordering, check the user manual or exploded parts diagram on the appliance data plate located inside your fireplace control compartment. Verify that your unit utilizes a side-mount pilot bracket rather than a rear or bottom bracket, as bracket styles are not interchangeable across different firebox designs.
Pros
- Drop-in compatibility for Napoleon part number W010-0790 across eleven specific appliance models
- Complete SIT Nova assembly format saves time during seasonal fireplace maintenance or repair
- Dedicated Natural Gas orifice eliminates fuel-type ambiguity for NG setups
- Practical alternative to hard-to-find original equipment manufacturer assemblies
Cons
- Configured exclusively for Natural Gas and is not compatible with liquid propane (LP) systems
- Fits only select Napoleon models, requiring careful verification of the fireplace rating plate
- Requires gas-line disconnection and safety checks, often necessitating professional installation
The Midwest Hearth Natural Gas Pilot Assembly is a replacement component designed to replace the Napoleon OEM part number W010-0790. This assembly serves homeowners, property managers, and repair professionals dealing with worn-out, clogged, or failing pilot systems on select Napoleon natural gas fireplaces and stoves. By replacing the entire pilot structure rather than diagnosing individual sensor components, this assembly provides a direct path toward restoring steady fireplace operation.
Functionally, this unit acts as a complete SIT Nova pilot assembly built specifically for Natural Gas applications. It delivers the pilot flame necessary to ignite the main burner while generating the proper millivolt signals to satisfy the gas valve safety circuit. Because a weak or corroded pilot can lead to nuisance shutdowns, failed main burner ignition, or a pilot that refuses to stay lit, installing a fresh assembly restores proper flame impingement on the ignition sensors.
In terms of construction, the unit incorporates standard SIT Nova hardware with a black mounting bracket designed to fit factory burner pans. The integrated wiring and tubing are arranged to match the original factory footprint of part W010-0790. This ensures the pilot hood, gas supply tube, and ignition leads sit in the exact spatial relationship required to safely carry the flame across to the main burner tube.
Installation requires working directly with the appliance gas supply and internal pilot tubing. The assembly is built to fit specific Napoleon models including the CDV270, GD16, GD17, GD27, GD40, GD45, GD3200, BGNV36, GB20, GS3500, and GDS3700. Because gas connections must be completely leak-free and correctly routed, installation requires shutting off the gas supply and conducting a proper leak check before lighting. Buyers uncomfortable with gas fittings should rely on a licensed gas technician.
The primary limitation of this part is its strict fuel and model specificity. It is manufactured exclusively for Natural Gas and cannot be safely installed on liquid propane (LP) units without distinct factory-rated LP components. Additionally, it does not offer universal fit across all Napoleon gas appliances, so matching the model number on the unit rating plate is critical before purchasing.
For owners of supported Napoleon gas fireplaces experiencing ignition trouble, the Midwest Hearth Natural Gas Pilot Assembly offers a dependable, practical repair solution. It provides all essential pilot components in a unified package, making it an efficient choice for restoring warmth and dependable operation before the cold season arrives.
This pilot assembly directly replaces Napoleon factory part number W010-0790. It is engineered to align with original factory mounting points and gas valve connections on select hearth products.
Confirmed model compatibility includes Napoleon CDV270, GD16, GD17, GD27, GD40, GD45, GD3200, BGNV36, GB20, GS3500, and GDS3700. Always check the metal rating plate inside your fireplace cabinet to confirm the exact model number before ordering.
This part is not a universal pilot assembly. Attempting to modify or fit this component onto unlisted fireplace brands or incompatible Napoleon series may result in improper ignition or safety hazards.
This assembly is configured exclusively for Natural Gas (NG) service. It features internal orifice sizing calibrated for standard residential natural gas line pressures.
Do not use this assembly with liquid propane (LP) systems. Propane operates under different gas pressures and requires different orifice sizing; running propane through an NG pilot creates severe combustion and safety hazards.
Ensure your fireplace venting, termination cap, and glass seal are in good condition during pilot replacement, as balanced draft is necessary for stable pilot flame retention.
Pros
- Includes both NG and LPG nozzles for dual-fuel adaptability.
- Integrated 750mV thermopile provides reliable millivolt power generation for compatible gas valves.
- Direct fit for an extensive list of Majestic, Monessen, Temco, and Vermont Castings fireplace models.
- Replaces multiple legacy part numbers including 10002264, SRV10002264, and 230-1781.
Cons
- Requires careful verification of your specific fireplace model and fuel type prior to installation.
- Gas line work and orifice swapping may require professional installation depending on local codes.
- No independent safety certification or testing standard is explicitly listed in the manufacturer data.
The palart 10002264 Pilot Assembly is an aftermarket replacement part built for gas hearth owners needing to resolve pilot outage or millivolt generator failure. It serves as an exact-fit replacement for homeowners, property managers, and service technicians maintaining select gas fireplaces, freestanding stoves, and fireplace inserts from established brands such as Majestic, Monessen, Temco, and Vermont Castings.
Operating function centers on its dual-fuel compatibility and integrated power generation. The unit comes with a natural gas nozzle pre-installed and includes a spare liquid propane nozzle, allowing configuration to either fuel supply. Its built-in 750mV thermopile produces the millivolt current required to open and hold standard standing-pilot gas valves, directly addressing issues where a pilot flame will not stay lit or fails to signal the main burner valve.
Construction features a compact footprint measuring 7 by 5 by 1.5 inches and weighing just 0.22 pounds. The assembly integrates the pilot bracket, hood, and thermopile into a single drop-in unit. It matches original manufacturer configurations, directly replacing part numbers 10002264, SRV10002264, 230-1781, 2103-011, and 2103-010 across dozens of direct-vent, vented, and select outdoor gas fireboxes.
Installation involves disconnecting the existing pilot tubing, wiring leads, and mounting screws before positioning the new assembly in the firebox burner tray. Because it includes both natural gas and liquid propane orifices, verifying which nozzle is seated before tightening gas connections is an essential safety step. Proper gas-tight sealing and leak testing are mandatory, and local building codes may require a licensed gas professional to handle the gas supply line.
Limitations relate primarily to model specificity and installation precautions. While the assembly fits dozens of Majestic models (such as the 33BDVR, DV360, and RFSDV series) and Vermont Castings models (including Stardance and Dutchwest units), it is not a universal pilot assembly for all gas appliances. In addition, manufacturer documentation does not list formal certifications like CSA or UL, meaning buyers should carefully cross-reference their unit owner's manual before ordering.
This replacement pilot assembly is a practical, budget-conscious choice for gas fireplace owners who need to restore an existing millivolt pilot system without replacing entire burner components. If your appliance matches the supported model lists and part numbers, it provides the essential hardware required to restore reliable ignition and steady burner operation.
This pilot assembly serves as a direct cross-reference replacement for OEM part numbers 10002264, SRV10002264, 230-1781, 2103-011, and 2103-010.
Compatible Majestic indoor models include the 33BDVR, 33BDVT, 33LDVR, 33LDVT, 33XDV, 360DVS series, 36BDVR, 36BDVT, 39BDVR, 43BDVR, DV360, DV580, DVB4136, DVRT series, DVT series, LHEC series, NV series, and RFSDV freestanding gas stoves.
Compatible Vermont Castings models include the 20DVT Brookhaven, 2467 Dutchwest, 2468 Dutchwest, INDVR Intrepid, Jefferson, Pinnacle, and Stardance SDDVT, SDDVTC, and SDV30 variants. It also fits Temco models DV5200MBN, GFPN41, and GFST41, along with Majestic outdoor fireplaces ODGSR36A, ODGR400, ODGSR42A, and ODGR500.
The assembly comes configured out of the box with a pre-installed natural gas (NG) orifice nozzle. A separate liquid propane (LPG) orifice nozzle is included in the package, giving homeowners the flexibility to configure the assembly to their specific fuel supply.
The included 750mV thermopile is designed to generate sufficient millivoltage from the heat of the pilot flame to engage the main gas valve. Proper flame contact with the thermopile tip is essential for consistent electrical generation and reliable burner activation.
Pros
- Direct fit alternative for worn or corroded Real Fyre G45 vented burner sets
- Bundles copper connector tubing, sealing tape, and glowing embers in the box
- Dual NPT 1/2-inch connection hubs permit gas line hookup from either left or right
- Dual-pipe configuration supports gas logs while distributing flame across the pan
Cons
- Liquid propane operation requires purchasing and installing an air mixer valve separately
- Does not include a safety pilot assembly, gas valve, or remote control hardware
- Restricted to fully vented fireplaces and requires manual verification of firebox clearance
The Americangaslogs 22-inch two-pipe burner pan is a specialized hearth component engineered for vented gas fireplaces, gas log sets, and ventilated fire setups. Specifically targeted as a direct replacement for Real Fyre G45 burner assemblies, this product best suits existing fireplace owners seeking to restore an aging gas log burner without replacing their entire decorative log set. Its dual-pipe geometry provides an even flame bed beneath standard vented gas logs.
In terms of fuel compatibility and operation, the burner pan supports both natural gas and liquid propane configurations. When connected to propane, an air mixer valve must be installed to ensure an appropriate fuel-to-air ratio and prevent excessive carbon soot accumulation. The manufacturer explicitly designates this unit for ventilated gas fireplaces, meaning the fireplace damper must remain open during operation to allow combustion byproducts to exhaust safely through the chimney or flue.
The build quality centers around a solid black metal pan weighing roughly 5.5 pounds, with overall dimensions of 22 inches in length, 6.1 inches in width, and 2.5 inches in height. Both ends of the pan are equipped with 3/4-inch length hubs featuring NPT 1/2-inch male threads. This dual-sided design simplifies gas line orientation whether your supply pipe enters from the left or right side of the firebox. The kit also bundles 7 ounces of glowing embers, a flexible copper connection kit, and thread sealing tape.
Installation requires placing the pan securely on the firebox floor, aligning it with your gas supply line, and ensuring adequate combustible clearances around the perimeter. While the manufacturer notes straightforward setup, gas plumbing involves strict safety standards. The burner pan does not come with an integrated safety pilot valve, regulator, or shutoff valve, so users must connect it to an existing compliant gas control system. Verifying firebox depth and width prior to installation is essential to guarantee the 22-inch pan and end hubs fit comfortably.
Realistic limitations must be kept in mind before ordering. The listing does not detail specific BTU ratings, gas pressure limits, or third-party certifications like CSA or UL listings. Propane users must also factor in the added step and expense of acquiring an external air mixer valve, as one is not supplied in the kit. Homeowners should verify their local mechanical codes and chimney draft requirements before purchasing.
Overall, this replacement burner pan provides a budget-friendly way to revitalize an existing vented gas fireplace. Homeowners with an existing Real Fyre G45 footprint who already have compatible gas valves and logs will find this package offers the essential hardware and ember media needed to restore steady flame performance.
This burner pan accommodates both natural gas and liquid propane fuel supplies, providing flexibility depending on your home utility configuration. When utilizing liquid propane, installing an air mixer valve is strictly required to introduce sufficient oxygen into the gas stream and minimize sooting.
The burner is built specifically for vented fireplace installations. It must only be operated in a fully functional fireplace with an open flue damper to allow combustion gases to escape outdoors. It is not approved for vent-free applications.
Americangaslogs designed this 22-inch burner pan as a direct replacement for Real Fyre G45 series burner sets commonly found in residential vented fireplaces. The 22-inch length by 6.1-inch width matches the standard footprint of medium-sized vented hearth arrangements.
Before purchasing, measure your interior firebox floor to ensure at least 24 to 26 inches of total width clearance, accommodating the 22-inch pan plus the 3/4-inch NPT 1/2-inch male connection hubs on either side. Check that your existing gas log grate and gas control valve align properly with this pan design.
Pros
- Direct replacement compatibility for Real Fyre G45 dual-pipe burner assemblies
- Dual-fuel support for natural gas or propane systems (when properly configured)
- Convenient package includes copper connection kit, thread tape, and glowing embers
- Dual 1/2-inch NPT male connection hubs provide left or right plumbing flexibility
Cons
- Propane operation requires a separate air mixer valve that is not stated as included
- Intended solely for ventilated setups and cannot be used in vent-free fireboxes
- Shipping package measurements in retail specifications can be easily confused with the actual pan dimensions
The Americangaslogs 18-inch two-pipe burner pan is an aftermarket gas hearth component engineered specifically as a replacement for Real Fyre G45 burner assemblies. Designed for standard ventilated fireplaces and outdoor gas fire pits, this burner pan targets homeowners, property managers, and remodelers who need to revitalize an existing gas log arrangement. When an original burner pan suffers from rust, clogged ports, or uneven flame patterns, replacing just the burner pan offers a cost-effective alternative to purchasing a completely new log set.
Functionally, the dual-pipe configuration provides balanced gas dispersion across the base of the firebox, promoting an even flame bed beneath your decorative ceramic logs. The package includes a 7-ounce bag of glowing ember material that enhances the visual display by creating a glowing coal effect once fuel flows across the burner ports. The unit supports both natural gas and liquid propane setups, though propane installations strictly require the addition of an air mixer valve to prevent excessive soot buildup and ensure stable combustion.
Construction centers on an 18-inch long by 6-inch wide by 2.5-inch high pan with a durable black finish. To accommodate varying firebox gas stub locations, the pan incorporates 3/4-inch long hubs with 1/2-inch male NPT threading on both the left and right ends. Americangaslogs also bundles a flexible copper connection kit and thread sealing tape, giving you the fundamental hardware needed to plumb the burner into standard hearth supply lines.
Installation is relatively straightforward for an experienced DIY homeowner replacing an existing vented burner, but gas line work always requires careful attention to safety and local codes. Buyers need to confirm that their firebox floor width and depth comfortably accommodate the 18-inch pan length along with the connection hubs. Prior to lighting, all fittings must be tested for leaks with a liquid detection solution, and the fireplace damper must be secured in an open position as required for vented gas systems.
A few realistic limitations should be noted before ordering. Despite broad compatibility claims, this burner is strictly designed for ventilated fireplaces and fire pits; it is not approved or safe for vent-free applications. Furthermore, while the burner supports propane fuel, the required air mixer valve is not included in the kit and must be sourced separately. Buyers should also verify physical clearances inside their firebox using the actual 18 x 6 x 2.5 inch pan dimensions rather than the larger shipping package dimensions listed in retail specs.
Based on its specifications and included accessories, the Americangaslogs 18-inch burner pan is a practical, value-oriented solution for restoring an aging G45-style hearth setup. It provides the essential burner structure, embers, and basic connection hardware needed to bring full, decorative flames back to your living space. As long as you verify your firebox dimensions, confirm fuel configuration, and ensure proper flue ventilation, this burner pan serves as a solid replacement option.
The actual burner pan measures 18 inches in length, 6 inches in width, and 2.5 inches in height. Homeowners should measure their fireplace floor to ensure adequate clearance around the pan and room for decorative logs.
Both ends of the burner feature 3/4-inch long hubs with 1/2-inch male NPT threading. Be sure to account for these hub protrusions and incoming gas flex line bends when calculating total width requirements inside your firebox.
This burner pan supports both natural gas and liquid propane configurations. For propane operation, an air mixer valve must be installed at the burner inlet to draw in sufficient oxygen and prevent excessive carbon sooting.
This component is engineered exclusively for vented fireplaces where combustion gases exit freely through an open chimney flue. It is not suitable for vent-free or unvented firebox enclosures.
Pros
- Includes full burner media package with vermiculite, volcanic rock, and glowing embers
- Handheld remote control allows easy flame modulation and power management
- Dual-pipe burner configuration provides balanced flame distribution across the ember bed
- Standard 1/2-inch NPT male connection hubs simplify gas line hookup
Cons
- Liquid propane operation requires an air mixer fitting that must be verified prior to setup
- Does not include ceramic gas logs, which must be purchased separately or reused from an existing set
- Product documentation does not list formal safety certifications such as CSA or ANSI
The Americangaslogs 18-Inch Burner Pan with Motorized Valve is designed as an all-in-one replacement package for vented gas fireplaces. Aimed primarily at homeowners looking to refurbish a worn gas log system or replace an older manual control assembly, this kit is specifically highlighted as a direct-compatible alternative to the Real Fyre G45 burner and APK-17 valve kit. It provides everything necessary to replace the core combustion components inside an existing vented firebox, excluding the decorative gas logs themselves.
Operation centers on an electronic motorized valve system paired with a handheld remote controller. Unlike basic manual match-lit pans or standard safety pilots that require kneeling at the hearth, this motorized assembly allows users to turn the gas fireplace on or off and adjust flame heights from across the room. The dual-pipe burner design helps spread the flames evenly across the ember bed, enhancing the visual presentation when nestled beneath compatible 18-inch to 24-inch gas logs.
Construction features a straightforward 18-inch long by 6-inch wide by 2.5-inch high steel pan with 3/4-inch long by 1/2-inch NPT male connection hubs on both ends. This symmetrical hub layout offers flexibility during gas line routing inside tight fireplace cavities. The manufacturer supplies a complete starter accessory bundle alongside the burner pan, including a pilot assembly, a copper connection kit, sealing tape, volcanic rock, vermiculite, and glowing ember material to dress the burner floor.
Installation requires access to an active gas line within an existing fully vented fireplace. While the manufacturer notes that homeowners can handle installation themselves due to the simple structure, working with gas lines, pilots, and fittings requires strict attention to safety and leak testing. Buyers planning to operate this unit with liquid propane must note the manufacturer requirement that an air mixer fitting be used to ensure clean combustion and prevent excessive soot buildup.
Before purchasing, buyers should account for a few clear limitations. This kit is designated strictly for vented fireplace applications and must never be installed in a vent-free or ventless firebox. In addition, the listing does not cite specific independent safety testing marks such as CSA, UL, or ANSI, which may be a requirement for strict local building codes or municipal permits. Ceramic refractory logs are not included, meaning you must pair this burner with your existing log set or buy logs separately.
For owners of vented masonry or factory-built fireplaces seeking an economical replacement for an aging G45-style burner, this Americangaslogs package offers strong convenience with its included media and remote-controlled motorized valve. It serves as a practical, comprehensive refresh kit provided your firebox meets vented draft requirements and gas connections are verified properly.
This burner pan kit is designed exclusively for vented gas fireplace enclosures. It requires an open chimney flue or compliant vented exhaust path to safely evacuate combustion gases during operation. Under no circumstances should this assembly be installed in an unvented or vent-free fireplace.
The system is compatible with both natural gas and liquid propane fuel supplies. When configuring the system for propane, the manufacturer states that an air mixer must be incorporated to achieve the correct air-to-gas ratio. Buyers should verify their incoming gas type, line pressure, and fitting requirements before installation.
The pan measures 18 inches in length, 6 inches in width, and 2.5 inches in height, not including the 3/4-inch long by 1/2-inch NPT male threaded connection hubs positioned on either end. Ensure your fireplace floor provides adequate flat surface area and clearance from sidewalls to accommodate the pan, valve, and pilot bracket.
The manufacturer notes compatibility with standard 18-inch to 24-inch gas log sets, making it a drop-in replacement option for setups originally built around the Real Fyre G45 burner platform. Verify that your log grate and ceramic logs can sit cleanly over the dual-pipe burner without impinging on the pilot assembly.
Pros
- Includes all critical flame-sensing and ignition hardware in one pre-assembled unit
- Generous 24-inch thermopile and thermocouple leads simplify routing to the main gas valve
- Dedicated liquid propane configuration ensures proper orifice calibration for LP pressure
- Direct fit for Napoleon systems using SIT Top Mount 0.199 series pilots with black wires
Cons
- Configured strictly for propane (LP) fuel and cannot be used on natural gas setups
- Incompatible with PSE pilot configurations that utilize orange ignition wires
- Requires gas shutoff and careful leak verification during installation
The W010-0799 Napoleon 3-Way Pilot Assembly is a dedicated propane (LP) replacement component engineered for select Napoleon direct-vent gas fireplaces, fireplace inserts, and freestanding gas stoves. It is specifically built for homeowners, property managers, and maintenance personnel who need to resolve hard-to-light pilots, failing thermocouples, or low millivolt output from an aging thermopile. By packaging all essential ignition and safety-sensing parts together, it provides a practical solution to restore reliable operation to an existing gas hearth appliance.
Gas fireplace pilots depend on precise thermal generation and flame detection to hold safety valves open and ignite the main burner smoothly. This complete 3-way assembly incorporates a factory-calibrated propane pilot orifice, an ignition electrode with wire, a thermocouple for flame safety detection, and a 24-inch thermopile that generates the millivoltage needed to operate standard millivolt gas valves. Replacing all connected pilot components simultaneously prevents the common frustration of diagnosing whether a lingering failure stems from a weak thermocouple, a dirty pilot tube, or an intermittent spark lead.
Construction reflects factory OEM standards, utilizing heat-resistant metal alloys designed for continuous exposure to gas pilot flames. The included 24-inch sensor and thermocouple leads provide adequate slack to route neatly through the firebox floor down to the lower control compartment. The electrode lead features durable high-temperature insulation with a black wire sleeve, which matches the visual standard required to identify this specific SIT-style ignition setup.
Verifying component specifications is essential before beginning any installation. This assembly is designed strictly for SIT Pilot Top Mounting 0.199 Series configurations with a black ignition wire, meaning it will not replace PSE pilot assemblies that use an orange wire. Because working on gas appliances involves gas line connections and safety-critical wiring, the fuel supply must be turned off prior to disassembly, and all gas joints must be tested for leaks before putting the fireplace back into service.
The primary limitation of this assembly is its strict design exclusivity. It is pre-configured strictly for liquid propane fuel and cannot be adapted for natural gas fireplaces, as propane orifices are specifically sized for higher fuel delivery pressures. In addition, physical bracket orientation and valve compatibility vary across model years, requiring buyers to check their specific fireplace model documentation rather than assuming a universal fit across all Napoleon appliances.
For owners of compatible Napoleon direct-vent units struggling with a pilot light that will not stay lit or fail to engage the main burner, the W010-0799 assembly offers an effective all-in-one remedy. Sourcing a complete assembly avoids the hassle of buying individual sensors separately and ensures all flame-path components are fresh. Provided your system uses the SIT 0.199 top-mount design with a black ignition lead, this kit delivers the precise fit needed for dependable heat.
Compatibility with this pilot assembly depends strictly on your Napoleon fireplace or stove model and the specific ignition hardware installed inside the firebox. The W010-0799 assembly is engineered to fit appliances configured with SIT Pilot Top Mounting 0.199 Series pilot bases.
A critical visual identifier is the color of the ignition electrode wire. This assembly is equipped with a black ignition wire. If your current unit features a PSE-style pilot assembly utilizing an orange ignition wire, this assembly is not compatible and will not match the mounting or ignition connection standards.
Furthermore, this assembly is factory-dedicated solely to Propane (LP) gas. It must never be installed in a natural gas fireplace, as the internal orifice sizing and air shuttering are calibrated specifically for liquid propane fuel systems.
This pilot assembly is built strictly for liquid propane (LP) gas applications in compatible Napoleon direct-vent fireplaces and gas stoves. Fuel type is critical because liquid propane operates under different delivery pressures and requires distinct air-to-fuel ratios compared to natural gas to burn cleanly and generate proper millivoltage.
Because gas fireplace repairs involve fuel connections and direct-vent combustion seals, safety procedures must be observed. The gas supply to the appliance should be shut off and the firebox allowed to cool completely before removing the old pilot. After installing the replacement pilot tube and sensors, all fittings must be checked for gas tightness using a suitable leak-detection fluid before lighting.
Frequently Asked Questions
How do I know if my Napoleon direct-vent fireplace needs a new burner or pilot assembly?
Pilot outages, weak yellow flames, or failure of the main burner to ignite typically signal worn pilot assemblies or clogged burner ports. A failing thermopile cannot generate the standard 750mV required to open the main gas valve. Inspecting your napoleon burner assembly for vittoria fireplace for carbon buildup or physical corrosion helps determine whether cleaning or part replacement is necessary in 2026.
Can I use a natural gas pilot assembly on a propane fireplace?
No, natural gas pilot assemblies cannot run on liquid propane without the proper conversion orifice. Natural gas and liquid propane operate under different supply pressures and require specific orifice diameters to maintain safe combustion. Installing a dedicated propane assembly, like the Napoleon WS-100-39 or W010-0799, prevents hazardous sooting and unstable flame behavior.
What components are included in a complete direct-vent pilot assembly?
A complete direct-vent pilot assembly includes the mounting bracket, pilot hood, spark electrode with lead wire, thermocouple, thermopile, and aluminum pilot gas tubing. Many complete kits feature 24-inch component leads to reach the gas valve beneath the firebox. When servicing dedicated supplemental heating units, replacing the entire pilot assembly at once prevents having to disassemble the firebox again if a secondary sensor fails soon after.
How does a side-mount pilot bracket differ from a top-mount bracket?
Side-mount brackets attach to the burner pan or chassis from the side, while top-mount brackets fasten vertically directly onto the pilot base plate. Using the wrong bracket orientation positions the pilot flame incorrectly relative to the burner ports. Check your fireplace manual and existing bracket style before purchasing a Napoleon Burner Assembly For Vittoria Fireplace to ensure proper ignition alignment.
Does my fireplace require an SIT Nova or PSE style ignition wire?
Compatibility depends on your exact fireplace serial number and factory valve setup. SIT 0.199 series pilot assemblies generally utilize a black ignition wire, whereas PSE style assemblies feature an orange wire. Verifying your existing ignition wire color and comparing it with heating replacement hardware ensures proper push-button or electronic spark connection.
Can universal burner pans replace an original direct-vent burner?
Only if the dimensions, gas line connections, and air mixer configurations strictly match the direct-vent firebox specifications. Universal burner pans like two-pipe vented pans often cater to open hearth log sets rather than sealed direct-vent units. Direct-fit OEM parts remain the safest choice to maintain proper combustion seals and prevent dangerous exhaust leakage.


Write Your Review
No reviews yet. Be the first to share your experience!