Ages 18-24? Explore Prime for Young Adults and see if you are eligible

Drafty flues let conditioned indoor air escape right up the masonry stack, leaving your living space chilly and driving up heating costs. Installing a reliable top-mounted seal stops conditioned air from leaking while keeping rain, downdrafts, and outdoor pests out of the flue. The us fireplace 13 x 18 dst1318 seal tight damper delivers an airtight lock directly at the chimney top for traditional wood-burning setups. Homeowners planning a hearth renovation alongside units like heatilator caliber 42 fireplaces often look for this exact dual-gasket design to restore energy efficiency. It gives your home dependable draft protection throughout every season.

Standard throat dampers sit lower in the firebox, but they rarely seal tightly against outdoor temperature swings. Modern top dampers solve this problem with cast aluminum frames, stainless steel hardware, and precision silicone gaskets that close tight when the hearth rests idle. Looking closely at manufacturer specifications helps you match the exact 13 inch by 18 inch dimensions to your clay flue tile before installation. While some rooms benefit from modern electric units like a touchstone sideline 40 flush mount electric fireplace, open masonry hearths require dedicated top-sealing caps to stop heat loss. Selecting the right chimney cap ensures reliable performance, lower utility bills, and clean airflow.

1
Best Seller

US Fireplace Products Seal Tight Damper 13" x 13"

US Fireplace Products
9.8 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The US Fireplace Products Seal Tight Damper 13" x 13" is a top-sealing chimney damper designed to eliminate downdrafts and heat loss in open wood-burning masonry fireplaces. Homeowners looking to replace leaky throat dampers will appreciate its dual-gasket airtight seal and preassembled design, though it cannot be used on chimneys serving vented gas logs.
Pros & Cons

Pros

  • Airtight dual-gasket construction seals significantly better than traditional cast-iron throat dampers
  • Comes completely preassembled and ready to mount on compatible 13-inch by 13-inch masonry flues
  • Does not require a separate fire safety device for standard open wood-burning applications
  • Lightweight 3.53-pound build makes handling on the roof safer and easier

Cons

  • Strictly prohibited for use on chimneys serving vented gas log sets
  • Requires safe rooftop flue access and precise measurement of outer flue tile dimensions before purchase
  • Included operating cable length and exact hardware mounting specifics are not detailed in the product data
Detailed Review

The US Fireplace Products Seal Tight Damper 13" x 13" is a top-sealing flue damper engineered to replace or upgrade inefficient, warped throat dampers inside traditional masonry fireplaces. For owners of open, wood-burning hearths, an unsealed or poorly fitting throat damper can function like an open window, allowing expensive heated or cooled indoor air to continuously escape up the chimney stack. This top-mounted unit moves the closure point all the way to the chimney crown, stopping air transfer before it ever enters the flue.

Thermal retention and draft control are achieved through a high-tech dual-gasket sealing system. The primary gasket sits securely inside an internal channel molded into the damper frame, while a secondary liquid gasket rests beneath the front portion of the damper lid. When the damper is pulled shut, these two components work in unison to form an airtight barrier that effectively halts chimney draft siphonage, keeps cold winter downdrafts out of the room, and blocks summer humidity and chimney odors from descending into the living space.

Constructed in a durable black finish, the damper weighs a manageable 3.53 pounds. This lightweight design is particularly beneficial when carrying equipment up a ladder and positioning it across the chimney crown. US Fireplace Products supplies the unit fully assembled and ready for installation, which minimizes preparation time. Furthermore, the design operates cleanly without requiring a supplemental fire safety device, streamlining both its mechanical function and everyday operation.

In terms of placement and sizing, this damper is built for 13-inch by 13-inch masonry flue tiles. Because installation occurs at the chimney termination, buyers should ensure safe rooftop access and verify that the flue liner extends far enough above the chimney crown to seat the damper frame securely. Top-mount dampers generally rely on a control cable routed down the flue into the firebox, so the chimney flue should be professionally swept and inspected for interior obstructions or heavy creosote buildup prior to running the line.

A critical limitation to note is fuel and appliance compatibility. The manufacturer explicitly states that the Seal Tight Damper is intended strictly for open, wood-burning masonry chimneys and is not suitable for chimneys serving vented gas logs. Vented gas appliances require a permanently open flue path to prevent dangerous combustion byproduct accumulation, making an airtight sealing lid unsafe for that configuration. Additionally, buyers with non-standard or unusually tall chimneys should confirm operating cable requirements before proceeding.

Overall, the US Fireplace Products Seal Tight Damper is a practical, targeted upgrade for wood-burning masonry fireplace owners experiencing stubborn room drafts or runaway energy loss. Provided your chimney tile measures 13 inches by 13 inches and vents a dedicated open wood fire, this preassembled dual-gasket damper delivers a dependable, tight seal to keep your home comfortable year-round.

Chimney & Flue Accessories

Top-sealing dampers represent a modern alternative to traditional cast-iron throat dampers located just above the firebox. Traditional throat dampers are notorious for warping, rusting, and leaving gaps that permit conditioned indoor air to leak out while allowing cold air, rain, and debris to enter the flue. By sealing the chimney at the very top, the Seal Tight Damper keeps the entire flue column warm and dry, reducing the cold-flue draft issues that often cause smoke to spill into the room during initial fire startups.

Before ordering any top-mount damper, accurate measurement of the chimney flue is essential. The 13-inch by 13-inch designation corresponds to standard nominal exterior flue tile dimensions. Buyers should measure both the length and width of their existing flue tile at the chimney top to ensure proper seating. If your flue is unlined, cracked, or uneven, masonry repair or an adapter may be necessary to achieve a secure, stable installation.

Replacement Compatibility

Compatibility for the US Fireplace Products Seal Tight Damper is strictly defined by the manufacturer. It is engineered exclusively for open, wood-burning masonry fireplaces. It cannot be adapted for factory-built zero-clearance metal fireplaces, pellet stoves, wood-burning stove pipes, or chimneys connected to vented gas log sets. Gas log appliances require a permanent flue opening or damper stop under standard residential safety codes, making an airtight lid incompatible.

For homeowners currently dealing with a missing, broken, or rusted-out throat damper in an open wood fireplace, this 13x13 unit serves as an ideal external replacement. Rather than attempting an expensive internal masonry tear-out to repair an old throat mechanism, installing this top-sealing damper allows the old damper to remain fully open while the new top lid provides complete draft control.

2
Editor's Pick

US Fireplace Products Seal Tight Chimney Damper

US Fireplace Products
9.8 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The US Fireplace Products Seal Tight Damper (13" x 18") is a top-sealing chimney damper designed to eliminate drafts and retain heat in wood-burning masonry chimneys. Equipped with a dual-gasket air-tight seal and pre-assembled construction, it is an ideal energy-saving retrofit for homeowners with open masonry fireplaces who do not use vented gas logs.
Pros & Cons

Pros

  • Dual-gasket mechanism delivers an air-tight seal to prevent cold downdrafts and heat loss.
  • Comes completely pre-assembled and ready to mount on compatible masonry flue tiles.
  • Eliminates the draftiness common with warped or loose traditional throat dampers.
  • Designed specifically to fit standard 13-inch by 18-inch masonry flue dimensions.

Cons

  • Strictly prohibited for use on chimneys venting gas logs due to safety regulations.
  • Installation requires rooftop access and proper safety precautions on the chimney crown.
  • Dimensions are fixed at 13 inches by 18 inches, requiring precise flue tile measurement prior to purchase.
Detailed Review

The US Fireplace Products Seal Tight Damper 13" x 18" is a top-sealing chimney damper designed to replace or bypass inefficient traditional throat dampers in open, wood-burning masonry fireplaces. Installed at the very top of the chimney stack, this accessory closes off the entire flue when the fireplace is not in use. It is engineered for homeowners who experience persistent cold drafts dropping down into the hearth area or notice heated living room air escaping unchecked up an open flue.

The defining performance feature of this unit is its dual-gasket sealing system. Unlike metal-on-metal throat plates that frequently warp and leak, this damper provides an air-tight seal utilizing two distinct gasket elements. The primary gasket sits inside a formed channel within the damper frame, while a secondary liquid gasket rests beneath the front portion of the lid. When pulled shut, these components compress together to create a reliable barrier against air exchange, helping keep conditioned indoor warmth inside your living space.

In terms of construction, the unit comes finished in black and weighs 5.13 pounds, balancing structural durability with manageable rooftop handling. The design does not require an auxiliary fire safety device and is manufactured from heavy-duty materials intended to withstand outdoor rooftop exposure. The mechanical hinge and lid assembly are engineered for fluid operation, allowing smooth opening before lighting a fire and positive latching once the hearth has fully cooled.

Setup is facilitated by the fact that the damper arrives completely assembled and ready to install directly over a 13-inch by 18-inch masonry flue tile. With packaged outer dimensions of 24 x 24 x 12 inches, the hardware sits squarely atop the chimney crown. Because mounting requires working at the chimney termination point, homeowners should ensure comfortable roof access and appropriate adhesive or mounting hardware, or arrange for installation by a local chimney technician.

A critical limitation to evaluate before buying is appliance compatibility. The manufacturer explicitly restricts the Seal Tight Damper to open, wood-burning masonry fireplace chimneys. It is not suitable for chimneys serving vented gas logs, which require a permanently open or mechanically blocked flue to prevent the accumulation of combustion byproducts. Verifying the exact outer dimensions of your clay flue liner is also essential, as it will not fit round metal liners or flues with differing cross-sections.

For owners of open wood-burning fireplaces with compatible 13-inch by 18-inch masonry chimneys, the US Fireplace Products Seal Tight Damper offers a direct, highly effective remedy for flue drafts. Its dual-gasket barrier provides a significant upgrade over worn cast-iron throat dampers, making it a sensible investment for whole-house draft reduction and seasonal energy conservation.

Compatibility & Flue Sizing

This chimney damper is built exclusively for open, wood-burning masonry fireplace chimneys with nominal 13-inch by 18-inch rectangular flue dimensions. It is not designed to fit prefabricated metal chimneys, round flue pipes, or zero-clearance factory-built fireplaces.

This damper must not be installed on any chimney serving vented gas logs. Vented gas sets produce combustion gases that require an unobstructed vent path at all times, making air-tight top-sealing dampers a code violation and safety hazard in those specific applications. Always measure the outside edge of your existing flue tile before ordering to ensure correct fitment.

Installation & Safety

Because the Seal Tight Damper mounts at the very top of your chimney, installation requires working on the roof. Proper rooftop fall protection, ladder stabilization, and basic masonry sealing materials are necessary to secure the frame to the chimney tile.

The unit ships completely assembled, eliminating on-site mechanical alignment. Once installed, the damper must always be checked and placed in the fully open position before lighting any fire in the hearth. Homeowners should only close the damper when the fire is completely extinguished and all ashes have cooled.

3
Limited Time

US Fireplace Products 13x18 Energy Top Chimney

US Fireplace Products
9.7 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The US Fireplace Products Energy Top Damper is a 13-inch by 18-inch top-sealing damper and low-profile cap designed for wood-burning fireplaces. It is an ideal solution for homeowners looking to stop cold downdrafts, prevent conditioned air loss, and protect their chimney flue from rain and animal intrusion.
Pros & Cons

Pros

  • Serves double duty as an energy-saving damper and an animal-blocking chimney cap
  • Stainless steel construction provides long-term weather and corrosion resistance
  • Low-profile aesthetic sits cleanly on the chimney crown without looking bulky
  • Helps stabilize room temperatures by sealing the flue at the roofline

Cons

  • Requires safe rooftop access and firebox cable routing for complete installation
  • Fits only 13-inch by 18-inch flues and will not accommodate round or mismatch-sized openings
  • Specified strictly for wood-burning fireplaces and not intended for gas log or pellet stove flues
Detailed Review

The US Fireplace Products Energy Top Damper is a dedicated combination chimney cap and top-sealing damper engineered for wood-burning fireplaces with 13-inch by 18-inch flues. This accessory directly serves homeowners dealing with drafty living rooms, high winter heating losses, or failing throat dampers that allow conditioned indoor air to escape straight up the chimney.

Operating at the top of the flue instead of inside the firebox provides distinct thermal benefits. Traditional throat dampers leave the entire masonry chimney column exposed to outdoor temperatures, chilling the brickwork and leaking drafts into the home. By sealing the chimney at the roofline, this top damper traps warm air inside the house, stops chilly downdrafts, and protects the entire length of the flue from freezing temperatures when no fire is burning.

Rooftop installations face direct weather exposure, and this damper cap is built from durable stainless steel with a black finish to ensure long-term durability against rain, snow, and sun. The low-profile silhouette provides a clean, understated aesthetic on the chimney crown while still leaving sufficient clearance for wood smoke to vent freely when the mechanism is open.

The unit measures 18 by 13 by 9 inches overall, matching standard 13-inch by 18-inch rectangular clay flues. Setup involves mounting the base to the chimney top and dropping an operational cable down the interior of the flue into the fireplace firebox, where a manual bracket allows you to open or latch the damper shut. Homeowners should physically measure both the outer and inner dimensions of their chimney flue tile before ordering to ensure proper seating.

A critical consideration is fireplace fuel compatibility. This top damper is designed specifically for wood-burning fireplace flues and should not be used on gas log sets with standing pilots or appliances that require continuous, unblockable venting according to local mechanical codes. Proper clearance from combustible roofing components and routine sweeping access must also be maintained.

For owners of open-masonry, wood-burning hearths seeking to solve draft issues and replace an inefficient throat damper, the US Fireplace Products Energy Top Damper offers a durable, dual-purpose solution. It delivers reliable weather protection and pest defense while helping preserve indoor heating efficiency throughout the year.

Chimney & Flue Accessories

Top-sealing dampers provide an effective barrier against chimney-related heat loss compared to low-mounted cast-iron throat dampers. When a traditional damper closes right above the firebox, the cold exterior air still fills the entire chimney liner, cooling down the surrounding interior walls of the home. Sealing the flue at the rooftop maintains warmer flue temperatures and helps eliminate cold-air siphoning into living spaces.

In addition to draft control, this unit acts as a permanent chimney cap. The exterior hood keeps rain, snow, downdrafts, and nesting wildlife out of the flue, protecting the masonry and chimney liner from water damage and blockages even when the damper is left open during fireplace use.

Fit & Dimensions

This chimney cap damper is sized for 13-inch by 18-inch rectangular flues, with overall product dimensions measuring 18 inches long, 13 inches wide, and 9 inches high. It is designed to mount directly to the top clay flue tile or chimney crown.

Always verify the exact dimensions of your existing chimney tile before ordering, as actual outer measurements can differ slightly from nominal trade sizes. A clean, structurally sound flue top and crown surface are necessary to ensure a secure mechanical fit and a tight rooftop seal.

4
Top Rated

US Fireplace Products Top Damper Plus 13" x 18"

US Fireplace Products
9.6 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The US Fireplace Products Top Damper Plus (13" x 18") is a top-sealing chimney cap and damper combination designed to seal in conditioned air and block downdrafts at the chimney flue exit. It is best suited for homeowners with compatible 13-inch by 18-inch masonry flues looking to replace leaky throat dampers and reduce household energy loss.
Pros & Cons

Pros

  • Airtight top-sealing design stops warm air escape far more effectively than traditional firebox throat dampers
  • Durable combination of cast-aluminum and stainless steel stands up to flue gases and harsh outdoor weather
  • Arrives fully assembled to minimize assembly time on the roof
  • Strong internal spring ensures reliable opening when tension is released at the hearth cable
  • Supported by manufacturer limited lifetime warranty coverage

Cons

  • Requires exact measurement because it is designed specifically for 13-inch by 18-inch flues and will not fit other sizes
  • Installation requires safe access to the chimney crown on the roof and dropping an operating cable down the flue
  • Does not eliminate the need for regular flue clearance checks and professional chimney sweeping
Detailed Review

The US Fireplace Products Top Damper Plus 13" x 18" is an exterior, top-sealing chimney cap and damper combination designed for wood-burning masonry chimneys. Traditional throat dampers located just above the fireplace firebox frequently warp, rust, or fail to seal completely, which allows heated interior air in winter and cooled air in summer to escape up the chimney column. This unit is tailored for homeowners looking to cap and seal their flue at the chimney top to reduce drafts, keep out external moisture and debris, and improve whole-home energy retention.

Operating at the flue termination rather than the hearth throat, this top-sealing damper establishes a tight physical barrier against outdoor weather extremes. When closed, the cast-aluminum lid sits securely to block cold downdrafts in the winter and humid exterior air in the summer, helping maintain stable living-space temperatures. The built-in spring assembly provides the necessary tension to lift the lid open fully when the fireplace is in use, facilitating natural draft flow while venting combustion gases safely out of the home.

Construction centers on a combination of a cast-aluminum lid and stainless steel hardware, offering corrosion resistance against precipitation and flue gases. The gray finish blends cleanly with exterior masonry crowns and clay chimney liners. The design incorporates a reinforced spring that facilitates consistent opening and closing action, minimizing sticking or binding common in older top-mounted dampers. Additionally, the manufacturer notes that this unit does not require a fusible link or specialized fire safety device, streamlining the mechanical assembly.

Installation involves securing the unit atop a 13-inch by 18-inch flue tile, running the operational cable down the interior of the chimney flue, and fastening the control bracket in or near the fireplace firebox. Because the unit ships completely assembled, rooftop assembly of individual linkages is eliminated. Daily operation is straightforward: releasing the hearth-mounted cable lever allows the heavy-duty spring to lift the lid open before lighting a fire, while pulling and latching the cable seals the lid shut once the fire and coals are completely cold.

Buyers must verify the exact outer and inner dimensions of their chimney flue tile prior to ordering, as a 13-inch by 18-inch damper will not seal correctly on flues with differing nominal dimensions or cracked clay liners. The installation also requires safe access to the roof and proper cable routing through any remaining throat damper assembly down to the hearth. As with any flue modification, homeowners should confirm chimney sweeping and structural soundness before mounting a top-mount damper.

For homeowners with a compatible 13-inch by 18-inch flue who want to eliminate stubborn fireplace drafts and upgrade leaky throat dampers, the US Fireplace Products Top Damper Plus offers a practical, heavy-duty solution. Backed by a limited lifetime warranty and durable dual-metal construction, it delivers reliable draft control and all-season protection when installed according to manufacturer instructions.

Fit & Dimensions

The Top Damper Plus is engineered specifically for chimneys with 13-inch by 18-inch nominal flue openings. Homeowners should measure the exterior and interior perimeter of their clay flue liner at the chimney top to verify compatibility before purchase. A proper fit ensures an airtight perimeter seal and prevents water or debris from bypassing the damper lid.

Chimney & Flue Accessories

As a top-mounted chimney damper, this accessory mounts at the flue exit on the chimney crown rather than inside the lower throat area above the firebox. It includes a cast-aluminum lid, a stainless steel mounting frame, and an internal spring mechanism designed for smooth cable actuation from the hearth below. When properly installed, it functions as both an energy-saving seal and a protective weather cap.

Warranty & Support

US Fireplace Products backs this 13x18 Top Damper Plus with a limited lifetime warranty covering manufacturing and material defects. Buyers should consult the included manufacturer documentation for specific installation guidelines, operational care, and warranty claim procedures.

5

US Fireplace Products 9x13 Seal Tight Damper

US Fireplace Products
9.6 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The US Fireplace Products 9" x 13" Seal Tight Damper is an airtight, top-mounted chimney damper designed to eliminate draft loss and retain heat in open masonry wood-burning fireplaces. Featuring a specialized dual-gasket system, it is an ideal energy-saving upgrade for homeowners seeking to replace leaky cast-iron throat dampers.
Pros & Cons

Pros

  • Airtight dual-gasket design seals the flue tightly to maximize indoor heat retention and block drafts
  • Arrives fully assembled and ready to install directly onto compatible masonry chimney tops
  • Does not require the addition of a separate fire safety device for wood-burning installations
  • Lightweight design at just under 3 pounds facilitates easier handling and mounting

Cons

  • Strictly prohibited for use on chimneys serving vented gas log sets
  • Requires physical rooftop access and accurate chimney flue measuring for proper installation
  • Restricted exclusively to open masonry fireplaces matching the 9" x 13" nominal size
Detailed Review

The US Fireplace Products 9" x 13" Seal Tight Damper is an exterior, top-sealing chimney cap damper designed for homeowners looking to eliminate draftiness and reduce conditioned air loss through open masonry fireplaces. Traditional wood-burning fireplaces frequently lose valuable indoor warmth through warped, ill-fitting, or missing throat dampers located just above the firebox. By sealing the chimney flue tightly at the very top of the stack, this damper stops the escape of heated indoor air and prevents cold downdrafts from entering the living space.

Energy retention centers on the manufacturer's specialized high-tech dual-gasket sealing configuration. The primary gasket sits embedded within a channel inside the damper frame, while a secondary liquid gasket is placed directly underneath the front portion of the damper lid. When closed, this two-part seal creates an airtight barrier that delivers superior thermal efficiency compared to traditional metal-to-metal throat dampers, keeping living areas more comfortable when the fireplace is not in active use.

Crafted with durable materials in a standard black finish, the unit weighs an accessible 2.98 pounds, making rooftop handling straightforward. The damper comes completely assembled right out of the box, eliminating the need to piece together loose hardware before securing it to the chimney top. In addition, the manufacturer specifies that the damper does not require an auxiliary fire safety device, ensuring simple, unobstructed operation through standard manual controls.

Proper installation requires exact sizing verification prior to ordering. Designed specifically for 9" x 13" masonry chimney flues, the unit mounts directly to the top clay flue tile. Homeowners should verify their exterior tile dimensions and wall thickness to confirm the frame will seat cleanly without gaps. Because chimney top installation involves working at roof height, property owners should take appropriate safety precautions or consult a chimney professional if comfortable rooftop access is not available.

A critical operational restriction is fuel compatibility. The manufacturer explicitly states that the Seal Tight Damper is made exclusively for open, wood-burning masonry chimneys and is not suitable for chimneys serving vented gas logs. Vented gas hearth appliances require a permanent flue opening or fixed damper clamp to prevent combustion byproducts from accumulating in the home, making airtight dampers unsafe for vented gas applications.

For homeowners operating standard open masonry wood fireplaces, the US Fireplace Products 9" x 13" Seal Tight Damper provides an effective way to resolve persistent winter drafts and seasonal energy loss. As long as flue measurements match the 9" x 13" specification and the fireplace strictly burns cordwood rather than vented gas logs, this pre-assembled damper serves as a practical, high-efficiency sealing upgrade.

Chimney & Flue Accessories

Top-sealing dampers function as both an energy-saving closure and an environmental barrier for masonry flues. By locating the seal at the chimney termination rather than inside the throat, the entire chimney flue remains warmer and protected against cold exterior drafts when closed.

The dual-gasket system on this model utilizes both a channel-mounted primary gasket and a forward liquid gasket. This configuration stops the chimney from acting as a giant exhaust vent for central household heating when the firebox is dark.

Note that this accessory is solely intended for masonry chimneys serving open wood-burning fireplaces. It must never be installed on flues connected to vented gas log sets, as gas appliances require continuous or mechanically restricted flue pathways to meet safety standards.

Fit & Dimensions

The US Fireplace Products Seal Tight Damper is manufactured to fit nominal 9" x 13" rectangular masonry chimney flue tiles. Before purchasing, verify the exterior length, width, and lip profile of your existing chimney tile.

Weighing approximately 2.98 pounds, the unit is lightweight enough to transport safely up a ladder to the chimney crown. It arrives completely assembled, minimizing work needed while positioned on the roof.

Ensure your chimney structure is a traditional open masonry build. This damper is not designed for factory-built zero-clearance metal chimneys or chimneys venting alternative fuel appliances.

6

US Fireplace Products 13x18 Top Chimney Damper

US Fireplace Products
9.6 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The US Fireplace Products 13" x 18" Top Damper combines an exterior chimney cap with a top-sealing flue damper to block downdrafts, moisture, and conditioned air loss on wood-burning masonry chimneys. It is an excellent upgrade for homeowners needing to replace a drafty throat damper on a compatible 13-inch by 18-inch flue tile.
Pros & Cons

Pros

  • Provides a tight seal at the top of the chimney to stop cold drafts and conditioned room air loss
  • Rust-free cast aluminum and stainless steel components prevent staining on the chimney exterior
  • Arrives completely assembled and ready to install without needing auxiliary safety add-ons
  • Low-profile profile remains discreet and out of sight from the yard when in the closed position

Cons

  • Requires exact flue tile sizing, as the fixed 13-inch by 18-inch frame cannot adjust to irregular masonry
  • Requires rooftop access and routing an operating cable down the flue into the firebox
  • Designed strictly for wood-burning fireplace flues and is not suitable for gas appliances requiring permanently open venting
Detailed Review

The US Fireplace Products Top Damper is an exterior, top-sealing chimney cap and damper combination engineered for wood-burning masonry fireplaces. Built to fit flues measuring 13 inches by 18 inches, this unit provides a practical upgrade for homeowners looking to replace leaky, warped throat dampers or cap an open flue tile. By closing off the chimney passage at the very top of the stack rather than down in the firebox, it creates a complete thermal barrier that stops cold downdrafts and keeps heated or air-conditioned indoor air inside the living space.

In terms of practical performance, this top damper resolves both weather protection and air leakage in one assembly. When closed, the cast-aluminum lid seals tightly against the frame to keep out rain, sleet, snow, and debris that could otherwise deteriorate mortar joints and steel firebox components. When an open flue is needed for a fire, the lightweight lid opens higher than standard heavy iron units, allowing combustion gases to vent freely without restricting draft or allowing smoke to roll back into the room.

Durability is an essential factor for any rooftop chimney accessory, and this unit uses rust-resistant materials suited for long-term weather exposure. The lid is cast aluminum while the frame and mechanical components rely on stainless steel, ensuring the damper will not corrode or produce rust stains down the face of exterior brick or stone. At a total weight of 10 pounds and a low 5-inch profile height, the assembly sits securely on top of the chimney crown while remaining virtually invisible from the ground when shut.

Installation is straightforward because the damper arrives fully assembled and ready to mount directly onto the flue tile without requiring an additional fire safety device. The installation process typically involves securing the damper base to the top of the 13-inch by 18-inch clay liner with suitable chimney adhesive, followed by dropping the control cable down the interior of the chimney into the firebox. Homeowners will need clear, unobstructed chimney access to drop the cable and mount the firebox handle bracket at an accessible height.

A critical consideration before ordering is verifying the physical dimensions of the clay liner. Because this unit has a rigid 13-inch by 18-inch footprint, it requires accurate outside flue measurements; it cannot flex to accommodate oversized, undersized, or damaged flue corners. Additionally, because this damper is intended for wood-burning fireplaces where manual flue control is permitted, it should not be installed on flues serving vented gas logs unless modified to meet local codes that mandate fixed-open venting.

For owners of wood-burning masonry fireplaces looking to eliminate drafts, reduce utility loss, and protect their chimney liner from moisture damage, the US Fireplace Products 13x18 Top Damper is an efficient, well-built choice. Its combination of rust-proof materials, high-opening lid, and fully assembled delivery makes it a solid investment for chimney maintenance and hearth comfort.

Fit & Dimensions

This damper is designed specifically for rectangular masonry flue tiles with nominal 13-inch by 18-inch outside dimensions. The total assembled dimensions measure 13 inches wide, 18 inches long, and 5 inches high, with an overall weight of 10 pounds.

Homeowners must measure the exterior length and width of the exposed clay flue tile at the chimney top before purchasing. Proper clearance around the tile is required to allow the cast-aluminum lid to open freely without contacting adjacent flues, masonry crowns, or decorative chimney shrouds.

Chimney & Flue Accessories

Top-sealing dampers serve as a modern replacement for traditional cast-iron throat dampers located directly above the firebox. Sealing the flue at the top prevents the entire chimney column from becoming cold and damp, which helps reduce downdrafts and odors when the fireplace is not in use.

The US Fireplace Products damper includes an operating cable system that routes through the flue to a bracket mounted inside the firebox. When closed, it keeps out precipitation and pests, and when released, it lifts open to provide unrestricted exhaust ventilation for wood fires.

Frequently Asked Questions About Chimney Dampers

How does the us fireplace 13 x 18 dst1318 seal tight damper create an airtight seal?

The damper relies on an advanced two-gasket system engineered to minimize heat loss. A primary gasket sits securely inside a channel along the damper frame, while a secondary liquid gasket rests beneath the front lid. This dual barrier shuts out cold downdrafts and keeps conditioned air inside whenever your fireplace is dormant.

Can you use a top sealing damper on chimneys serving vented gas logs?

No, manufacturer specifications state this damper is designed only for open, wood-burning masonry chimneys. It is not suitable for flues serving vented gas logs, which require permanent ventilation to avoid carbon monoxide buildup. Always verify your appliance fuel type and flue setup before ordering a top-mounted cap.

What chimney flue dimensions fit the Us Fireplace 13 X 18 Dst1318 Seal Tight Damper?

This model is engineered specifically for nominal 13-inch by 18-inch rectangular clay flue tiles on masonry chimneys. Measuring the outer and inner rim of your existing flue liner ensures proper clearance and gasket seating. Selecting the matching size prevents smoke restriction when the damper lid is fully open.

Does the Us Fireplace 13 X 18 Dst1318 Seal Tight Damper require an extra fire safety device?

No, the unit does not require a separate fire safety device or fusible link for standard operation. It ships completely assembled and ready to mount directly onto the chimney crown. While complex heating equipment might use a modine 5h0725910003 fireplace part, this damper uses a simple mechanical spring and cable assembly.

How does a top-mounted damper compare to an original cast-iron throat damper?

Top-mounted units seal the chimney at the roofline rather than inside the lower firebox throat. Metal-on-metal throat plates warp over time, allowing conditioned air to escape constantly. Placing the seal at the chimney top protects the entire flue against rain, ice, and animals while eliminating indoor drafts.

How do you operate the damper from inside your home?

The damper operates through a stainless steel cable that drops down the flue into the firebox. A bracket and handle mount securely to the interior brickwork within easy reach. Pulling the handle closes and locks the lid, while releasing it allows the heavy-duty spring to open the damper for fires.