Drafting an outdoor seating zone often brings frustrating trade-offs between open views and smoke protection. Traditional fire pits let embers blow across furniture, while standard chimineas block sightlines. The Rb73 Fennek 50 4 Sided Glass Fireplace balances both needs using an enclosed four-sided glass fire chamber built from 3mm CorTen steel. Homeowners comparing outdoor wood burners against enclosed propane fireplace setups appreciate clear flame views without blowing ash. Dutch designer Roderick Vos shaped this architectural centerpiece to deliver clean combustion and broad warmth across open terraces.
Patio installations also demand solid weather resistance so stone and pavers avoid heat scorch or rust stains. Sturdy elevated legs with stainless steel bolts raise the hearth off ground level, while the 119.29-inch height channels exhaust well above seated guests. Unlike indoor options or plug-in linear electric models, this freestanding wood burner relies on natural convection, concrete hearth insulation, and manual draft regulation. Reviewing manufacturer specifications confirms that burning seasoned hardwood helps maintain the pristine 360-degree glass view on chilly nights.
Pros
- Thick 3mm CorTen steel forms a self-protecting patina that holds up against harsh outdoor weather conditions
- Enclosed heat-resistant glass allows open flame viewing while containing logs and floating embers on the patio
- Tall nearly 10-foot exhaust stack channels wood smoke overhead rather than drifting into patio seating
- Fire-resistant concrete base provides a robust thermal foundation for high-temperature firewood combustion
- Elevated leg stance with stainless steel hardware reduces direct contact rust transfer onto terrace flooring
Cons
- Substantial 220-pound total weight and tall vertical profile require multiple people and careful logistics to assemble and place
- Natural CorTen steel runoff during the initial weathering stage can stain porous, light-colored stone or concrete pavers
- Manufacturer does not specify measured BTU output or square-foot heating coverage, meaning warmth depends on wood fuel and local weather
The RB73 Fennek 50 is a premium freestanding wood-burning outdoor fireplace created by Dutch designer Roderick Vos. Combining an enclosed glass-paneled firebox with an architectural chimney flue, this chiminea-style fireplace is tailored for homeowners, outdoor remodelers, and landscape designers who want a sophisticated, durable wood-burning focal point for spacious backyards, stone patios, and open terraces.
Construction quality centers around robust 3mm-thick CorTen steel, an alloy specifically prized for its ability to develop a dense, protective outer rust patina that seals the underlying metal against ongoing atmospheric decay. Inside the firebox, the unit features a deep fire bed lined with durable fire-resistant concrete, giving the base the structural resilience needed to handle direct firewood burning and intense thermal cycles without warping the frame.
Combustion airflow and draft control are integrated directly into the steel housing. Side panels feature precision air slots that supply oxygen to the bed while promoting clean glass surfaces by circulating airflow along the viewing windows. For additional draft tuning, an adjustable valve built into the lower flue section allows you to physically regulate airflow and control burn rate, while the tapered top exhaust helps prevent rain from penetrating the chimney.
Managing placement requires forethought regarding weight and height. At 220 pounds and standing nearly 10 feet tall (119.29 inches), this fireplace provides an imposing presence with a compact ground footprint of approximately 22 by 22 inches. The elevated legs use stainless steel bolts to raise the bottom off the ground, a practical inclusion intended to reduce direct contact rust stains on outdoor terrace surfaces.
A realistic consideration with any CorTen steel product is the initial weathering phase. As the steel reacts with rain and humidity to form its seasoned patina, surface runoff can cause minor rust marks on porous, light-colored pavers, meaning placement over dark stone, gravel, or protective pads is wise. Additionally, the manufacturer does not publish formal BTU numbers or square-foot heat ratings, so perceived warmth will depend largely on firewood selection and ambient outdoor wind conditions.
For buyers who appreciate modern industrial architecture and prefer the aroma and warmth of real firewood over gas burners, the RB73 Fennek 50 is a well-engineered patio investment. Its heavy 3mm steel plate, enclosed safety glass, and towering exhaust stack make it an exceptional statement piece built for years of outdoor gatherings.
The RB73 Fennek 50 features an exterior footprint of 22.05 inches in width by 22.05 inches in depth, making it relatively compact at ground level while making full use of vertical patio clearance. Its total assembled height is 119.29 inches, which measures just under 10 feet from the base of the legs to the tapered chimney top.
Given its 220-pound weight and tall center of gravity, this wood-burning fireplace requires a firm, completely level, non-combustible foundation such as poured concrete, heavy paving stones, or structural terrace hardscaping. Buyers should also verify that overhead clearances are completely free of low tree canopies, patio covers, pergolas, or eaves prior to positioning the unit.
Engineered from 3mm CorTen steel, the Fennek 50 is built specifically for permanent outdoor installation without requiring liquid rust sealants or protective paint coatings. As the material weathers, it naturally oxidizes into a seasoned brown patina that serves as a self-renewing barrier against deep structural corrosion.
The firebox interior is reinforced with a custom cast fire-resistant concrete floor that insulates the bottom housing from extreme fire temperatures. The viewing windows utilize certified heat-resistant glass to withstand direct flame contact, while stainless steel hardware on the support feet provides clean, corrosion-free contact points with your patio surface.
Frequently Asked Questions About the Rb73 Fennek 50 4 Sided Glass Fireplace
How tall is the Rb73 Fennek 50 4 Sided Glass Fireplace, and how does its height manage smoke?
The unit stands 119.29 inches tall, using an extended chimney stack to route exhaust high above patio seating. A tapered smoke exhaust cap tops the flue pipe to block rainwater from entering the firebox during storms. This elevation encourages natural thermal draft, keeping smoke clear of conversation zones. For small spaces where tall outdoor flues are impractical, homeowners often choose compact alternatives like table-top linear units instead.
What material is used for the exterior body of the RB73 Fennek?
The exterior body is built from 3mm CorTen steel, an alloy that develops a protective oxidized patina over time. This natural rust-colored coating seals the steel against rain, snow, and patio humidity without degrading structural integrity. Stainless steel bolts on the elevated support legs keep the steel off moist ground and help prevent rust transfer onto stone terraces.
How does the four-sided glass system stay clean during wood burning?
Side panel air slots create an air-wash barrier that channels fresh air across the heat-resistant glass to reduce soot. An adjustable valve on the lower pipe lets you fine-tune flame intensity and combustion airflow. Using seasoned dry firewood remains necessary, as green or wet wood creates excess smoke that coats glass surfaces regardless of airflow.
What type of base or hearth bed does the RB73 Fennek 50 feature?
A deep fire bed made of fire-resistant concrete lines the bottom to support glowing coals and wood logs. This refractory layer shields the base from intense thermal cycles while storing heat for stable burning. Similar to refractory linings in gas models or modular fireplace panel kits, this concrete bed protects surrounding metal from direct thermal fatigue.
Can the Rb73 Fennek 50 4 Sided Glass Fireplace be installed indoors or under a covered patio?
No, this unit is strictly an outdoor wood-burning fireplace engineered for open-air terraces and patios. Wood combustion produces real smoke, high heat, and carbon monoxide, requiring unrestricted exterior airflow. Installing this unit indoors or beneath low combustible awnings poses severe safety hazards. Always follow local open-burning rules and maintain clear setbacks from combustible walls.


Write Your Review
No reviews yet. Be the first to share your experience!