Ages 18-24? Explore Prime for Young Adults and see if you are eligible

Drafty traditional masonry fireplaces pull conditioned indoor air right up the chimney, turning what should be a cozy hearth into a major source of heat loss. Upgrading an open firebox with modern natural gas fireplace inserts provides powerful supplemental zone heating without the continuous mess of split firewood or stubborn soot buildup. Factory-built fireboxes and dedicated burner chassis slide directly into existing masonry cavities or zero-clearance framing, delivering immediate warmth through steady gas lines. Deciding between complete firebox assemblies and freestanding gas log burners depends entirely on your existing firebox depth, clearance dimensions, and chimney setup. Many homeowners also pair their appliances with matching fireplace insert trim surrounds to seal gaps cleanly around rough brick openings.

Heating performance across current models ranges from 26,000 BTU to 33,000 BTU for vent-free designs, while vented burner packages can reach up to 90,000 BTU for robust radiant flame display. Ventless appliances deliver up to 99.9% heating efficiency directly into your living room because no warm air escapes out an open flue. Still, you must verify room square footage, clearance requirements, and local municipal heating codes before scheduling your line connection. Reliable thermostatic remotes and built-in oxygen depletion safety sensors ensure stable temperature management while keeping indoor air quality fully protected.

1
Best Seller

Real Fyre 24-Inch Live Oak Vented Natural Gas Log

RealFyre
9.9 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The Real Fyre 24-Inch Live Oak Vented Gas Log Set converts a traditional wood-burning fireplace into a clean-burning natural gas hearth delivering up to 90,000 BTU of radiant warmth. It is best suited for existing fireplace owners seeking lively flames and authentic wood aesthetics without the chore of handling real firewood.
Pros & Cons

Pros

  • High 90,000 BTU output provides generous radiant warmth and tall, dynamic flames
  • All-in-one package includes burner, grate, media, and connection hardware for straightforward installation
  • Steel-reinforced ceramic logs provide realistic bark detail and long-term heat resistance
  • Upgrade-ready design accepts optional manual safety pilot or remote control kits later

Cons

  • Restricted strictly to natural gas in fully vented fireplaces and cannot be used with liquid propane or vent-free fireboxes
  • Base match-lit configuration requires manual lighting with a long match or lighter unless an optional pilot kit is added
  • Substantial 67-pound total weight and tapered firebox opening requirements demand precise pre-purchase measurements
Detailed Review

The Real Fyre 24-Inch Live Oak Vented Gas Log Set is designed for homeowners wanting to convert an existing masonry or factory-built wood-burning fireplace into a convenient natural gas feature. By eliminating the smoke, ash, and routine cleanup associated with cordwood, this kit provides an accessible hearth upgrade. It is specifically tailored for households connected to a natural gas line that already possess a fully functional chimney and flue system.

Heat generation and flame presentation are the standout characteristics of this burner system. Producing up to 90,000 BTU, the vented burner creates full, active flames that wrap around the log stack to generate substantial radiant heat across the living space. The included glowing embers and silica sand help diffuse the gas flow across the burner pan, producing an authentic ember bed glow that mirrors an established wood fire.

Construction quality centers on six hand-painted ceramic logs reinforced internally with steel rods. This internal reinforcement helps prevent cracking and degradation from repeated exposure to intense burner flames. The accompanying grate holds the logs securely in an authentic stacked arrangement, while the included damper clamp ensures the chimney flue remains propped open during operation for proper draft and combustion exhaust.

Installation requires careful attention to firebox dimensions and local building codes. The logs measure 13 by 23 by 15 inches, with a total kit weight of 67 pounds. A match-lit installation requires a minimum firebox opening of roughly 28 inches wide at the front, 23 inches wide at the rear, 13 inches deep, and 17 inches high. The included gas line connection kit facilitates hookup to an existing gas stub, though professional installation is strongly encouraged for all fuel-line connections.

A primary limitation of this set is its specific operational scope. It is built strictly for natural gas and cannot be installed in liquid propane setups or unvented fireboxes. In its standard out-of-the-box configuration, lighting is entirely manual via match or long lighter. Homeowners desiring push-button ignition, a standing pilot, or handheld remote control will need to purchase and install an add-on safety pilot kit, such as the Real Fyre SPK-26 or APK-17, which also requires additional firebox width.

For owners of vented wood-burning hearths seeking powerful supplemental radiant warmth and a classic fire look, this Real Fyre Live Oak set offers a durable and comprehensive solution. As long as your firebox dimensions meet the minimum clearance guidelines and your fuel supply is natural gas, it provides a dependable, mess-free alternative to traditional cordwood.

Fit & Firebox Requirements

Careful measurement of the existing fireplace interior is necessary before choosing a 24-inch gas log set. For this match-lit configuration, the firebox must provide a minimum opening width of 28 inches at the front and taper to at least 23 inches wide at the rear wall.

Depth and height requirements are equally critical for flame clearance and burner placement. The firebox must measure at least 13 inches deep from the front opening to the back wall and offer at least 17 inches of vertical clearance from the hearth floor to the lowest point of the opening.

Buyers planning to add optional safety pilot kits or remote control valves should plan for additional interior width. Adding a valve assembly to the burner side typically demands an extra 3 to 4 inches of firebox width beyond the standard match-lit dimensions.

Fuel & Venting

This Real Fyre log set is factory-configured strictly for natural gas supplies. It is not compatible with liquid propane tanks or cylinders, and gas conversion should never be attempted without manufacturer-approved conversion parts.

The system is classified as a vented gas appliance and must be installed only in a working wood-burning fireplace connected to an open chimney flue. It is strictly prohibited for use in vent-free fireboxes or closed-flue environments.

Proper venting requires that the included damper clamp be permanently installed on the fireplace damper blade. This hardware keeps the damper open to ensure exhaust gases and combustion byproducts exit safely through the chimney at all times.

2
Editor's Pick

Duluth Forge FNF300T Ventless Natural Gas

Duluth Forge
9.9 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The Duluth Forge FNF300T is a zero-clearance ventless natural gas fireplace insert that delivers up to 26,000 BTUs of supplemental heat for spaces up to 1,350 square feet. It is an ideal heating solution for homeowners seeking chimney-free warmth with thermostatic control that can be recessed directly into wall framing or installed in a mantel.
Pros & Cons

Pros

  • High 26,000 BTU heating capacity provides powerful supplemental warmth for living areas up to 1,350 square feet
  • Zero-clearance design allows flexible installation into standard framing or compatible mantel surrounds
  • Integrated thermostat automatically maintains selected comfort levels without continuous manual adjustments
  • Battery-assisted Piezo ignition works independently of household electrical power
  • Built-in Oxygen Depletion Sensor (ODS) provides an automatic safety shut-off feature

Cons

  • Configured strictly for natural gas and does not include liquid propane conversion parts
  • Ventless gas fireplaces are subject to local code restrictions and may not be permitted in all municipalities or room types
  • Rough framing and cutout dimensions will vary from exterior product dimensions and require manual verification
Detailed Review

The Duluth Forge Model FNF300T is a ventless natural gas fireplace insert engineered to provide robust supplemental zone heat without requiring an exterior chimney, flue, or venting pipe. Designed for remodelers, new home builders, and homeowners with access to an active natural gas supply line, this unit suits living rooms, basements, or open living areas where running an exhaust chimney is structurally difficult or budget prohibitive.

Performance centers on a high-efficiency heating system capable of generating up to 26,000 BTUs. Duluth Forge rates this unit to heat living areas up to 1,350 square feet at 99.9 percent fuel efficiency, circulating generated heat directly into the living space. The integrated thermostat control continuously monitors room temperature, cycling the burner on and off automatically to preserve comfort. Starting the fire is straightforward thanks to a battery-assisted Piezo ignition system that lights the pilot without relying on household 120-volt electrical circuits.

Visually, the firebox delivers a traditional masonry aesthetic through a dual precision-ported gas burner. The package includes five hand-painted ceramic fiber logs designed to radiate heat and display a full-bodied flame pattern. When illuminated, the dancing flames interact with the textured log bark to provide realistic fireplace ambiance without ash handling, spark management, or firewood storage.

Installation is aided by the customizable zero-clearance firebox design, which measures 29.1 inches wide, 13.9 inches deep, and 23.9 inches high. This structural format allows the insert to be recessed into combustible wall framing when adhering to clearances, or integrated into a compatible Duluth Forge mantel surround. It requires a dedicated, hard-piped natural gas supply line, and professional gas-line installation is recommended to guarantee airtight fittings and compliant gas pressure.

Important limitations involve fuel and venting regulations. This unit is dedicated exclusively to natural gas; product data does not support or include propane conversion hardware. Furthermore, while the built-in Oxygen Depletion Sensor (ODS) automatically shuts off gas flow if oxygen levels fall below safe standards, unvented gas appliances are subject to regional building codes. Prospective buyers must confirm local ordinances regarding vent-free installations, especially regarding room volume restrictions or installations in confined spaces.

For homeowners permitted to install unvented gas appliances, the Duluth Forge FNF300T provides an efficient, high-output zone heating option. Its reliable thermostatic control, flexible zero-clearance chassis, and detailed ceramic log set make it an attractive and functional hearth upgrade for chilly open-concept living spaces.

Fuel & Venting

This fireplace insert is factory-configured specifically for natural gas and operates as a vent-free appliance, eliminating the need for exterior venting, chimneys, or roof penetrations. By exhausting combustion heat directly into the room, it operates at a manufacturer-listed 99.9 percent efficiency.

Because ventless appliances use indoor air for combustion, buyers must verify that local municipal codes permit vent-free gas appliances in their planned installation area. To protect indoor air quality, the insert includes a factory-installed Oxygen Depletion Sensor (ODS) with an automatic shut-off mechanism that halts the gas supply if ambient oxygen levels drop.

Installation & Fit

The Duluth Forge FNF300T measures 29.1 inches wide, 13.9 inches deep, and 23.9 inches high. Featuring a zero-clearance cabinet construction, it can be framed directly into a wall cavity or housed within an approved mantel surround, offering versatile architectural flexibility for living rooms and remodel projects.

Prospective buyers should note that rough opening and cutout requirements differ from external dimensions to ensure proper heat dissipation and safe combustible clearances. Always consult the official manufacturer installation manual to confirm rough framing dimensions, gas line rough-in locations, and required clearances to mantels or finished wall materials prior to installation.

3
Limited Time

Duluth Forge FDI32R Dual Fuel Ventless Gas

Duluth Forge
9.9 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The Duluth Forge FDI32R is a 32,000 BTU dual-fuel ventless gas fireplace insert that operates on either natural gas or liquid propane without requiring an exterior chimney or flue. It is an ideal heating solution for homeowners and remodelers looking to heat spaces up to 1,500 square feet with realistic ceramic fiber logs and convenient remote operation.
Pros & Cons

Pros

  • Patented dual-fuel capability provides the flexibility to connect to natural gas or liquid propane lines
  • Potent 32,000 BTU output easily supplements heat across large rooms and open floor plans up to 1,500 square feet
  • Zero-clearance enclosure simplifies custom built-in framing and mantel installations
  • Complete hearth package includes nine ceramic fiber logs, iron grate, protective mesh screen, and remote control

Cons

  • Ventless gas appliances are restricted by local building codes in select states, municipalities, and specific rooms
  • Flame height modulation is manual at the unit rather than adjustable directly through the remote control
  • Substantial 88.2-pound chassis and dedicated gas line requirements require planned installation and professional gas fitting
Detailed Review

The Duluth Forge FDI32R Dual Fuel Ventless Gas Fireplace Insert is designed for homeowners and remodelers seeking dependable supplemental heat and traditional hearth ambiance without the expense of building a chimney. Rated at 32,000 BTUs, this vent-free gas unit delivers heat directly into living rooms, finished basements, or open-concept living areas up to 1,500 square feet. By utilizing patented dual-fuel technology, the insert gives buyers the flexibility to connect either to a residential natural gas supply line or to a dedicated liquid propane tank setup.

Heat delivery is exceptionally effective because the ventless design prevents warm air from escaping through an exterior exhaust pipe or chimney. The manufacturer lists the unit at 99.9% heating efficiency, maximizing fuel value inside the home. A standing pilot system supports the included LCD remote control, allowing users to cycle the main burner on or off from across the room. While the remote manages ignition cycling, flame height adjustment is handled manually via the unit control knob, providing direct tactile control over fuel consumption and heat output.

Construction quality focuses on durability and authentic visual design, centered around a zero-clearance steel firebox with a black finish. Inside the hearth, nine hand-painted ceramic fiber faux logs rest on an iron grate to emulate split firewood. A fine mesh screen fronts the firebox, shielding the burner assembly while preserving an unobstructed view of the flame. The zero-clearance firebox design means the chassis can be installed directly against framing or recessed into walls and custom mantels where a gas supply is present.

Installation planning requires close attention to manufacturer clearances and rough dimensions. The chassis measures 36.38 inches wide, 33.27 inches high, and 18.38 inches deep, with a total weight of 88.2 pounds. A critical safety specification requires at least 42 inches of vertical clearance from the top of the firebox to the ceiling. Because ignition relies on a battery-powered push-button Piezo system and the receiver operates on batteries, the fireplace does not require a hardwired 120-volt household electrical circuit to generate heat.

Potential buyers must verify municipal codes and local regulations prior to purchase, as vent-free gas appliances are restricted or prohibited in certain jurisdictions, as well as in confined rooms like bedrooms or bathrooms. Because ventless combustion releases moisture and combustion byproducts directly into indoor air, proper room volume and adequate ventilation are essential. Proper gas line sizing and leak testing are required, making professional installation by a certified gas technician the safest approach.

Overall, the Duluth Forge FDI32R is a practical choice for anyone seeking high-output supplemental heating without the architectural footprint of an exterior flue. For households with appropriate room volume, verified code compliance, and proper ceiling clearances, this insert combines dual-fuel versatility, substantial 32,000 BTU output, and classic fireplace styling in a single package.

Fuel & Venting

The Duluth Forge FDI32R utilizes patented dual-fuel technology, allowing the appliance to operate on either natural gas or liquid propane without purchasing separate conversion kits. This feature provides flexibility whether your home connects to municipal gas lines or relies on propane tanks.

As a ventless heating appliance, this unit does not require a chimney, flue pipe, or exterior ductwork. All heat generated remains inside the living area, which supports the manufacturer-listed 99.9% heating efficiency rating. However, buyers must verify that vent-free appliances are permitted under their local municipal building codes and state regulations before ordering.

Fit & Dimensions

The exterior chassis measures 36.38 inches in width, 33.27 inches in height, and 18.38 inches in depth, weighing 88.2 pounds. These dimensions make it suitable for spacious fireplace openings or purpose-built zero-clearance wall enclosures.

The zero-clearance firebox rating allows the unit to be recessed directly into wall framing accessible to a gas supply line. The manufacturer mandates a minimum clearance of 42 inches from the top of the fireplace insert to the ceiling to ensure safe heat dissipation.

Remote & Controls

The fireplace insert features a battery-operated push-button Piezo ignition system that lights the standing pilot reliably without requiring connection to your home electrical grid. This ensures heating capability even during household power outages.

An included handheld remote control features an LCD screen and manages burner on and off functions remotely. Fine-tuning flame height is managed manually via the control knob located on the insert firebox.

4
Top Rated

Duluth Forge FNF300R Ventless Natural Gas

Duluth Forge
9.8 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The Duluth Forge FNF300R is a 26,000 BTU ventless natural gas fireplace insert designed to heat spaces up to 1,350 square feet without requiring a chimney or external ductwork. Equipped with a thermostatic remote control, zero-clearance housing, and an oxygen depletion safety sensor, it is an ideal choice for homeowners and remodelers looking to build a custom mantel or recessed wall hearth with natural gas.
Pros & Cons

Pros

  • High heat output of 26,000 BTUs covers large living areas up to 1,350 square feet without ductwork
  • Vent-free 99.9% efficient operation keeps heat inside the home and eliminates expensive chimney installation costs
  • Handheld remote control includes thermostatic temperature adjustments for convenient comfort control
  • Zero-clearance design allows flush-to-wall framing or custom pairing with standard fireplace mantels
  • Built-in Oxygen Depletion Sensor with auto-shutoff delivers essential indoor air safety monitoring

Cons

  • Configured strictly for natural gas connections and does not support propane conversion out of the box
  • Vent-free gas appliances are subject to local building code restrictions and are prohibited in certain states, cities, or bedrooms
  • Framing cutouts, gas plumbing connections, and combustible clearances must be carefully verified prior to installation
Detailed Review

The Duluth Forge FNF300R is a zero-clearance ventless natural gas fireplace insert engineered for homeowners, remodelers, and builders who want substantial supplemental warmth and traditional hearth ambiance without the expense of a masonry chimney or direct-vent flue. Designed specifically for households with an active natural gas supply, this unit fits cleanly into a custom-built mantel, recessed wall cavity, or existing fireplace opening that meets the manufacturer's clearance criteria.

Heating capability is a central highlight of this model, producing up to 26,000 BTUs of thermal energy. Duluth Forge rates this output to warm spaces up to 1,350 square feet. Because the insert operates on a ventless cycle, virtually all the fuel energy is converted directly into usable indoor heat, which the manufacturer rates at 99.9% efficiency. The included multi-function remote control allows users to turn the firebox on and off while also dialing in a target room temperature from the comfort of a couch or chair.

Visual ambiance is generated through five hand-painted ceramic fiber logs positioned across a dual precision ported gas burner. The burner layout directs natural gas flames around the ceramic logs to simulate the depth, glow, and movement of a traditional cordwood fire. The ceramic fiber material retains warmth, assisting in heat transfer while providing a classic hearth aesthetic whether viewed from directly in front or across a larger family room.

From a construction and installation standpoint, the firebox measures 29.1 inches wide, 13.9 inches deep, and 23.9 inches high. Its zero-clearance chassis design allows flush-to-wall drywall framing or clean integration into prefabricated wood mantels without requiring specialized standoffs. However, buyers should recognize that unit dimensions differ from required rough-opening cutouts. Proper planning for gas supply line routing, non-combustible hearth protection where mandated, and adequate room volume is necessary before starting construction.

Safety considerations are paramount when installing any unvented gas heater. The FNF300R features a factory-calibrated Oxygen Depletion Sensor (ODS) paired with an automatic shut-off mechanism that shuts down the gas supply if room oxygen drops below safe levels. Ventless gas appliances are governed by strict local municipal and state regulations; certain areas, including California and various local jurisdictions, restrict or prohibit vent-free gas installations, and square footage minimums typically apply. Additionally, this insert is factory-configured strictly for natural gas and cannot be interchanged with liquid propane unless explicitly stated by the manufacturer.

Overall, the Duluth Forge FNF300R is a dependable, high-output heating option for buyers looking to add a primary hearth feature or bolster room warmth without chimney maintenance. When matched with an approved natural gas line and installed according to local building codes, it offers an effective balance of classic flame aesthetics, convenient thermostatic remote operation, and high-efficiency supplemental heat.

Fuel & Venting

This Duluth Forge insert is configured specifically to run on residential natural gas lines and should only be connected to an approved natural gas supply meeting manufacturer pressure specifications. It is not compatible with liquid propane tanks or conversion kits unless explicitly authorized and supplied by the manufacturer.

The vent-free configuration eliminates the need for venting pipes, B-vent chimneys, direct-vent terminations, or existing masonry flues. By exhausting clean combustion byproducts directly into the living space, it achieves an estimated 99.9% heating efficiency.

Buyers must verify local mechanical and building codes prior to purchase. Ventless gas appliances require specific minimum room cubic-foot volumes to ensure proper combustion air, and many jurisdictions restrict ventless units from being installed in bedrooms, bathrooms, or tightly sealed modern construction.

Fit & Installation

Exterior unit dimensions measure 29.1 inches in width, 13.9 inches in depth, and 23.9 inches in height. These are outer casing dimensions and should not be used as rough framing opening dimensions.

The zero-clearance cabinet allows framing materials to come into direct contact with specified chassis surfaces, simplifying flush wall installations and integration into custom mantel packages. Always consult the manufacturer installation manual for specific framing cutouts, header heights, and combustible clearances.

Professional installation by a licensed gas technician or mechanical contractor is strongly advised to verify gas line sizing, pressure testing, shutoff valve accessibility, and leak detection before lighting the burner for the first time.

Safety Features

The FNF300R is equipped with a standard Oxygen Depletion Sensor (ODS) integrated into the pilot assembly. If the oxygen concentration in the room drops below safe operating thresholds, the ODS system automatically shuts off the gas supply to extinguish the burner.

An automatic thermal shut-off valve acts as a secondary failsafe against unsafe operating conditions, closing the main burner valve if pilot flame failure or irregular combustion is detected.

While built-in sensors provide critical operational safety, homeowners should always maintain working carbon monoxide detectors and smoke alarms in rooms containing fuel-burning appliances, as well as ensure adequate room air circulation during extended burn periods.

5

EROMMY 24-Inch Ventless Natural Gas Log Set

EROMMY
9.7 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The EROMMY 24-inch ventless natural gas log set delivers up to 32,000 BTUs of supplemental heat with thermostatic remote control, making it a strong choice for homeowners seeking efficient zone heating in an existing fireplace. It requires a dedicated natural gas line and a minimum firebox opening of 32 inches wide by 14 inches deep by 24 inches high.
Pros & Cons

Pros

  • High heat output rated at 32,000 BTUs with manufacturer-listed supplemental warmth up to 1,100 square feet
  • Feature-rich wireless remote supports ambient thermostat settings, child lock, and automatic shutoff safety logic
  • Built-in Oxygen Depletion Sensor (ODS) adds a critical automatic fuel shutoff layer
  • Complete decorative hearth package including six ceramic logs, burner base, receiver box, and lava rock

Cons

  • Configured strictly for natural gas with no factory propane conversion support
  • Requires a relatively large minimum firebox opening of 32 inches front width and 24 inches height
  • Vent-free gas appliances are restricted by municipal building codes in certain U.S. jurisdictions and specific rooms
Detailed Review

The EROMMY 24-Inch Ventless Fireplace Log Set is an indoor gas appliance designed for homeowners looking to convert a masonry or pre-existing firebox into a supplemental zone heater. Engineered strictly for natural gas connections, this vent-free set eliminates the requirement for an exterior flue or chimney, allowing all generated warmth to stay inside the living area. It suits living rooms, family rooms, and open floor plans where an existing fireplace opening meets the manufacturer sizing requirements.

Heating capability is a central highlight of this burner assembly, which produces up to 32,000 BTUs of output. According to manufacturer specifications, the vent-free burner operates at 99.9% heating efficiency and provides supplemental warmth across areas up to 1,100 square feet. Operation is managed via a pulse ignition system and a multifunctional wireless remote. The remote offers both manual burner control and a thermostat mode that cycles heat based on ambient room temperature, alongside child lock capability and an auto-shutoff safeguard if signal connection is interrupted.

Visual ambiance centers on six hand-painted ceramic logs molded to replicate the texture of South American silk floss wood. Ceramic materials are chosen for high-temperature resilience, ensuring the logs retain structural form and finish under repeated flame contact. A bag of natural lava rock is included to mask the burner chassis and disperse the flame pattern naturally across the floor of the firebox. For mechanical protection, the burner includes an integrated Oxygen Depletion Sensor (ODS) that cuts off the gas supply if indoor oxygen levels fall below safe operating standards.

Installation planning requires exact measurement of your existing enclosure before purchasing. The log set requires a minimum firebox opening of 32 inches wide across the front, tapering to at least 22 inches wide at the rear, with a minimum depth of 14 inches and a vertical clearance of 24 inches. A critical operating instruction from the manufacturer specifies that any existing glass doors on the fireplace must remain fully open during operation to prevent extreme heat buildup and dangerous incomplete combustion.

Prospective buyers must account for notable code and fuel limitations before ordering. This system cannot be used with liquid propane, and the manufacturer provides no support for aftermarket fuel conversion orifices or valves. Additionally, vent-free gas appliances are governed by strict municipal, regional, and state regulations across the U.S., with some jurisdictions prohibiting ventless gas appliances in specific living spaces such as bedrooms or tightly sealed modern construction.

For owners of natural-gas-equipped homes seeking a clean-burning alternative to wood fires, the EROMMY 24-inch log set delivers robust heat output and remote thermostatic convenience. Verifying your firebox dimensions and local building codes is the essential first step, followed by professional installation by a licensed gas fitter to guarantee proper line pressure and gas-tight fittings.

Fit & Dimensions

Careful measurement of your firebox is mandatory before purchasing this 24-inch log set. The manufacturer specifies minimum interior firebox dimensions of 32 inches wide across the front opening, narrowing down to at least 22 inches wide along the rear wall.

Vertical clearance requires at least 24 inches from the firebox floor to the lowest ceiling point of the opening. Depth clearance requires a minimum of 14 inches from front to back to provide safe spacing for the burner tray, ceramic logs, and gas connection piping.

Fuel & Venting

This appliance is configured strictly for natural gas fuel lines. It cannot be used with liquid propane tanks or lines, and unapproved fuel conversions pose severe safety risks.

Because this is a vent-free unit, it discharges heat directly into the living space without venting through an exterior chimney. Homeowners must verify that vent-free gas appliances are permitted under local municipal building codes in their area. Any fireplace glass doors must remain fully opened whenever the burner is active.

Remote & Controls

The included handheld remote control connects to an included receiver box and operates in either manual mode or thermostat mode. In thermostat mode, the user sets a desired temperature to regulate burner cycling automatically.

The remote also features a built-in child lock (CP lock) to prevent unauthorized button presses, selectable Fahrenheit and Celsius display readouts, and an automatic safety shutoff that powers down after two hours if no signal is received for 15 minutes.

Safety Features

Combustion safety is monitored by an integrated Oxygen Depletion Sensor (ODS), which acts as an automatic pilot shutoff if ambient room oxygen falls below safe levels.

Reliable startup is facilitated by an electric pulse ignition system, eliminating the need to light the burner with an open match. Safe operation still depends on adequate room ventilation and maintaining required clearances from combustible hearth surrounds.

6

Duluth Forge 18-Inch Ventless Natural Gas Log Set

Duluth Forge
9.6 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The Duluth Forge DLS-N18T-2 is an 18-inch ventless natural gas log set delivering up to 30,000 BTUs of supplemental heat with built-in thermostatic cycling and an Oxygen Depletion Sensor. It is an ideal heating upgrade for homeowners with an existing natural-gas-ready fireplace looking for realistic wood-like ambiance without the heat loss of a chimney.
Pros & Cons

Pros

  • Produces strong supplemental warmth with up to 30,000 BTUs and 99.9% vent-free efficiency.
  • Integrated thermostat manages room temperature automatically without needing a remote control or batteries.
  • Eight-piece ceramic fiber stacked oak log set provides realistic bark texture and natural fire ambiance.
  • Oxygen Depletion Sensor (ODS) with automatic shut-off provides essential indoor combustion safety.
  • PFS approved and ANSI certified for compliant indoor residential installations.

Cons

  • Configured exclusively for natural gas and cannot be used with liquid propane without approved conversion hardware.
  • Ventless gas appliances are restricted or prohibited by local building codes in certain municipalities and bedroom locations.
  • Lacks a remote control, requiring manual adjustment directly on the chassis-mounted thermostat dial.
Detailed Review

The Duluth Forge DLS-N18T-2 is an 18-inch vent-free natural gas log set engineered to provide supplemental warmth and realistic hearth ambiance. Designed for existing masonry fireplaces or certified vent-free firebox enclosures, this system suits homeowners who want an effective heat source without losing conditioned air up an open chimney flue. Because it runs on natural gas, it is purpose-built for households with an existing plumbed natural gas supply looking to replace messy cordwood or outdated burner assemblies.

Heating capability is a primary strength of this unit, generating up to 30,000 BTUs to warm areas up to a manufacturer-rated 1,100 square feet. The 99.9% vent-free design directs nearly all generated heat into the living area rather than venting it outside. Everyday operation is regulated by a chassis-integrated mechanical thermostat that cycles the burner on and off automatically. This provides hands-off temperature maintenance without the need to replace handset batteries or manage misplaced remotes, though all adjustments must be made directly at the hearth.

Visual ambiance is driven by an eight-piece ceramic fiber log arrangement molded from genuine oak timber. Each log features hand-painted detailing that replicates authentic bark texture and stacked wood characteristics. Underneath, a two-row U-burner flame system mounted in a durable black powder-coated chassis distributes flames across multiple levels. This dual-row configuration allows the fire to wrap around the logs, creating depth and a glowing ember effect reminiscent of a traditional wood fire without producing soot or ash.

Safety and indoor air protection are handled by an integrated Oxygen Depletion Sensor (ODS) that features an automatic shut-off mechanism if room oxygen levels fall below safe standards. The entire assembly is ANSI certified and PFS approved for indoor residential use. Installation requires a plumbed natural gas connection and adequate firebox clearance. Given the gas line sizing, pressure checks, and combustion air requirements involved, installation by a licensed gas professional is strongly recommended.

Before buying, verify local building codes and room dimensions. Some local jurisdictions and specific room types, such as bedrooms or confined spaces, restrict or prohibit the use of unvented gas appliances. Furthermore, this model is built specifically for natural gas and cannot run on liquid propane without dedicated, manufacturer-supported conversion components. Buyers must also measure their existing firebox to confirm that the 18 x 13 x 12.5-inch chassis and log profile fit comfortably with proper clearances.

For homeowners with compatible firebox dimensions and code approval, the Duluth Forge DLS-N18T-2 delivers a sensible blend of high heat efficiency and classic hearth appeal. Its sturdy powder-coated frame, automatic thermostatic cycling, and realistic ceramic oak logs make it a dependable supplemental heating upgrade for cold-weather living spaces.

Fuel & Venting

This log set is engineered exclusively for natural gas supplies and is not configured for liquid propane out of the box. Proper fuel supply pressure and dedicated gas pipe sizing must be verified prior to hookup to ensure safe burner operation.

Operating as a vent-free system with a 99.9% listed efficiency rating, the unit does not require an open chimney damper, chimney liner, or exterior vent pipe. However, ventless gas appliances are governed by strict local codes, so homeowners must verify local municipal regulations and room-volume ventilation guidelines before installation.

Thermostat & Heat Settings

The system generates up to 30,000 BTUs of supplemental heat output, which the manufacturer rates for room areas up to 1,100 square feet depending on room insulation, ceiling height, and local climate.

Temperature regulation is handled via an integrated mechanical thermostat that turns the burner on and off to maintain a consistent comfort level. Because control is handled directly on the chassis dial, operation does not depend on handheld remotes, Wi-Fi connections, or electrical power outages.

Safety Features

Indoor operating safety is anchored by an integrated Oxygen Depletion Sensor (ODS) coupled with an automatic safety shut-off valve that halts gas flow if ambient oxygen levels dip below certified thresholds.

The unit carries ANSI certification and PFS approval for residential indoor heating. These listings verify compliance with national safety standards when the appliance is installed and operated according to manufacturer clearances and instructions.

7

Duluth Forge Dual Fuel Ventless Gas Fireplace

Duluth Forge
9.5 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The Duluth Forge FDF400RT-ZC is a 32,000 BTU ventless gas fireplace insert engineered to run on either natural gas or liquid propane, heating spaces up to 1,500 square feet without a chimney. It is an ideal fit for remodelers and homeowners seeking high-efficiency supplemental heat with zero-clearance installation flexibility and convenient remote burner control.
Pros & Cons

Pros

  • Dual-fuel system supports both natural gas and liquid propane connections out of the box
  • Zero-clearance firebox framing simplifies recessing into walls or existing openings
  • Ventless 99.9% efficiency keeps all generated heat inside the living area without chimney draft loss
  • Complete set includes remote control, 6 ceramic logs, iron grate, and protective mesh double doors

Cons

  • Ventless gas appliances are subject to regional building code restrictions and room ventilation requirements
  • Remote control handles burner on/off cycling while flame height must be adjusted manually on the unit
  • Requires a strict minimum vertical clearance of 42 inches from the top of the firebox to the ceiling
Detailed Review

The Duluth Forge FDF400RT-ZC is a ventless gas fireplace insert engineered to deliver robust supplemental warmth to living rooms, family rooms, and open living spaces. Operating with patented dual-fuel technology, this insert suits homeowners, builders, and remodelers who need the freedom to fuel their hearth with either natural gas or liquid propane. Because it requires no outside flue, ductwork, or masonry chimney, it provides a practical solution for finishing new construction framing or retrofitting an existing fireplace opening where exterior venting is structurally impractical.

Heating performance centers around a 32,000 BTU burner rated at 99.9% fuel efficiency, providing manufacturer-guided heating coverage for areas up to 1,500 square feet. Vent-free operation directs all produced heat directly into the living quarters rather than losing energy through a chimney draft. The system utilizes a standing pilot arrangement paired with push-button Piezo ignition for straightforward starting. Once lit, the included LCD remote control cycles the burner on and off from the comfort of your seat, while flame height can be tuned manually at the control valve.

Aesthetically, the insert delivers classic hearth detailing inside a durable black enclosure weighing 69.5 pounds. The interior firebox features a sprayed brick liner that provides depth behind six hand-painted ceramic fiber logs resting on an iron grate. Protective mesh double doors enclose the front of the unit, creating an authentic fireplace profile while shielding the internal burner assembly. These components are designed to withstand high temperatures and maintain a realistic appearance whether the flame is active or unlit.

Installation is facilitated by the zero-clearance firebox chassis, which measures 29.1 inches wide by 15.6 inches high by 29.5 inches deep. This zero-clearance rating allows the chassis to be built directly into standard wood or metal wall framing or set flush against any wall where a certified gas line can be routed. When laying out the framing, you must maintain at least 42 inches of clearance between the top of the fireplace and the ceiling. Because the pilot and receiver run on battery power (including 1 AAA battery for the remote), the fireplace does not require an electrical outlet connection.

Buyers should account for certain code and operational considerations before choosing this insert. Vent-free appliances are restricted or regulated by municipal codes in certain jurisdictions and are generally not permitted in small, enclosed rooms like standard bedrooms or bathrooms. In addition, while the handheld remote turns the flame on and off, fine adjustments to flame intensity require opening the mesh doors to use the manual knob. Gas line sizing and operating pressure must always be verified by a qualified professional to ensure proper burner combustion.

For homeowners and remodelers looking to add substantial supplemental heat without the heavy expense of exterior venting, the Duluth Forge FDF400RT-ZC offers a dependable, fuel-flexible hearth system. Its zero-clearance firebox, realistic ceramic log set, and high-efficiency dual-fuel burner deliver strong value for open living areas requiring reliable warmth.

Fuel & Venting

The Duluth Forge FDF400RT-ZC features patented dual-fuel technology that allows the unit to run on either Natural Gas or Liquid Propane. This provides flexibility for properties that may transition between municipal natural gas and tank-based propane supplies.

Because it is a ventless design, 99.9% of the fuel consumed is converted directly into room heat without loss through an exhaust flue. Buyers should verify local municipal regulations before purchase, as vent-free gas appliances are subject to specific room size limits and regional building codes.

Installation & Clearances

The zero-clearance firebox is engineered for mounting against or recessing directly into standard wall framing, provided an accessible gas line is available. The exterior chassis measures 29.1 inches wide, 15.6 inches high, and 29.5 inches deep, with a total weight of 69.5 pounds.

Installers must observe the manufacturer requirement of at least 42 inches of vertical clearance between the top of the fireplace insert and the ceiling. Proper gas line connections, pressure checks, and framing clearances should always be handled by a licensed professional.

Remote & Controls

This insert incorporates a standing pilot ignited via a manual push-button Piezo system. Because ignition and flame controls operate independently of household line voltage, the unit can supply supplemental heat during electrical power outages.

An included wireless remote control with an LCD screen pairs with the internal receiver to turn the main burner on and off from across the room. Adjustments to flame height and heat output are handled manually at the control valve behind the mesh double doors.

8

Duluth Forge 24-Inch Ventless Natural Gas Log Set

Duluth Forge
9.4 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The Duluth Forge DLS-N24R-1 is a 24-inch ventless natural gas log set delivering up to 33,000 BTUs of supplemental heat with an included LCD thermostat remote. It is an ideal fit for homeowners looking to convert a compatible existing firebox into an efficient heat source without losing warmth up a chimney flue.
Pros & Cons

Pros

  • High 33,000 BTU output capable of supplemental heating for areas up to 1,300 square feet
  • Thermostatic LCD remote allows hands-free temperature regulation and flame management
  • Realistic hand-painted 9-piece ceramic fiber log stack with glowing ember bed effects
  • 99.9% vent-free efficiency keeps almost all generated heat inside the home
  • Meets ANSI and PFS standards and includes an Oxygen Depletion Sensor for safety

Cons

  • Configured strictly for natural gas fuel lines and cannot be used with propane without verified conversion equipment
  • Ventless gas appliances have strict room size and local code limitations that must be verified prior to installation
  • Requires plumbing into an existing natural gas supply line, which typically calls for professional installation
Detailed Review

The Duluth Forge 24-inch ventless natural gas log set (model DLS-N24R-1) is designed for homeowners seeking to upgrade an existing masonry fireplace or approved vent-free firebox into an efficient zone-heating appliance. Operating entirely on natural gas without the need for an open chimney flue or external ductwork, this system directs generated warmth into the living area rather than venting it outside. It is especially well-suited for living rooms, family spaces, and open-concept floor plans where traditional wood fires prove drafty or labor-intensive.

Heating capability is a primary strength of this log set, which produces up to 33,000 BTUs of supplemental heat and carries manufacturer coverage guidance for areas up to 1,300 square feet. The burner system pairs a single row of dancing yellow flames with an ember bed and loose ember material, producing a convincing impression of a glowing bed of coals. Because it is rated at 99.9% vent-free efficiency, the appliance converts nearly all of its fuel energy into usable indoor warmth.

Convenience is elevated by the included handheld LCD thermostat remote control. Rather than relying on basic manual valve toggling, users can select a preferred ambient room temperature. The thermostat system then monitors conditions and cycles flame operation automatically to maintain consistent comfort. For safety, the burner is equipped with an Oxygen Depletion Sensor (ODS) and automatic shut-off mechanism that continuously measures room oxygen levels, complying with both ANSI and PFS indoor appliance standards.

Log aesthetics show solid attention to detail through nine individual ceramic fiber logs molded from natural timber. Each log features hand-painted surface treatments, including deep bark textures, exposed split wood, and realistic charring. Ceramic fiber is lightweight yet highly heat-tolerant, allowing the logs to withstand direct flame contact while radiating stored warmth outward. With overall chassis dimensions of 24 inches wide, 12.5 inches deep, and 11.5 inches high, the set fills standard medium-sized hearth openings comfortably.

Prospective buyers should take note of critical pre-installation requirements. This log set is factory-configured strictly for natural gas and cannot be connected to liquid propane without approved manufacturer equipment. Additionally, ventless gas hearth products are subject to regional building codes, room-volume formulas, and local restrictions that must be verified before purchase. Professional installation by a qualified gas technician is recommended to guarantee proper gas line sizing, secure fittings, and correct firebox clearances.

For households with an approved hearth opening, an available natural gas line, and a desire to reduce central furnace demand, the Duluth Forge DLS-N24R-1 offers dependable performance. Combining 33,000 BTUs of steady zone heat, realistic split oak aesthetics, and automated remote thermostat control, it represents a practical, high-value alternative to wood-burning maintenance.

Fuel & Venting

This Duluth Forge log set is built strictly for natural gas fuel systems and operates on a vent-free principle. Because it requires no chimney, flue, or venting pipe, 99.9% of the thermal energy produced stays inside your living space.

Before purchasing, buyers must check local building codes and municipal regulations, as some areas restrict or prohibit vent-free gas appliances in certain spaces. Ensure your home has a dedicated natural gas supply line at the hearth and do not attempt to operate this unit with liquid propane.

Thermostat & Controls

The included LCD remote control features integrated thermostat functionality, allowing you to select and maintain your target room temperature without getting up from the couch.

The system monitors ambient air temperature and automatically regulates flame operation to maintain the set comfort level, helping prevent overheating in spaces up to 1,300 square feet.

Safety Features

Safety is managed by an integrated Oxygen Depletion Sensor (ODS) and an automatic shut-off safety valve. If indoor oxygen levels fall below safe thresholds, the system shuts down gas flow immediately.

The appliance carries official ANSI and PFS safety certifications for indoor residential use, confirming adherence to established mechanical and combustion safety standards when installed according to the manufacturer manual.

Frequently Asked Questions About Natural Gas Fireplace Inserts

Can a ventless natural gas fireplace insert be installed without a chimney?

Yes, ventless units do not require an outside chimney or flue duct because they operate at 99.9% fuel efficiency. Models engineered with zero-clearance fireboxes can mount directly into a framed wall or pair with a dedicated cabinet mantel. You must verify local building codes and room volume requirements first, as certain regional jurisdictions prohibit vent-free gas appliances in specific living areas.

What is the difference between vented gas logs and vent-free gas inserts?

Vented log sets require an open chimney damper to exhaust combustion byproducts outside, whereas vent-free inserts release warmth directly into the living space. A vented burner set generates larger radiant flames up to 90,000 BTU inside a fully functional wood-burning firebox. Vent-free inserts maintain lower outputs between 26,000 and 33,000 BTU to manage indoor air quality safely. If you prefer sealed combustion with dedicated wall piping rather than an open damper, modern direct vent fireplaces provide an alternative venting design.

How do you measure an existing fireplace to verify insert fit?

You must measure the front opening width, rear cavity width, interior depth, and vertical opening height. Minimum firebox requirements always exceed nominal burner sizes, as seen with 24-inch log assemblies that require at least 32 inches of front clearance and 14 inches of depth. Never equate outer chassis dimensions with rough opening requirements, because clearance margins and gas line fittings need extra space.

Can a natural gas fireplace insert operate on liquid propane?

Conversion is only supported if the manufacturer explicitly designates the appliance as dual fuel. Dual fuel inserts include patented valves calibrated to accept either natural gas or liquid propane connections safely. Dedicated natural gas burners cannot run on propane without complete burner and regulator replacement because fuel delivery pressures differ significantly.

What safety features protect indoor air quality with ventless gas appliances?

Vent-free gas fireplace inserts integrate an Oxygen Depletion Sensor (ODS) directly into the pilot assembly to monitor ambient oxygen levels. If oxygen in the room drops below safe operating thresholds, the safety mechanism instantly cuts off the main gas flow. Certified units also utilize automatic shut-off valves and Piezo ignition systems to prevent unburned gas accumulation during startup.