Locating exact replacement components that match prefabricated firebox dimensions often feels like an uphill battle. Factory labels fade, model codes get obscured, and generic hardware rarely aligns with factory mounting brackets. Owners of existing majestic fireplaces routinely face heat loss from worn glass gaskets, sluggish air circulation from aging fans, or pilot assemblies that refuse to stay lit. Selecting hardware engineered specifically for factory sheet-metal fireboxes ensures proper draft containment and efficient heat distribution. Whether you manage older wood-burning units or modern direct-vent gas fireplace designs, maintaining exact factory tolerances prevents draft issues and costly retrofits.
Upgrading your hearth setup with dedicated accessories restores performance without requiring a complete firebox tear-out. Key replacement parts like blower fan kits, factory-spec fireplace glass doors, and calibrated pilot assemblies improve convective airflow while protecting interior living spaces from unwanted room drafts. Evaluating exact model tags, gas supply configurations, and mounting rails before ordering keeps your hearth reliable throughout every heating season.
Pros
- Complete package includes the blower motor, bracket, magnetic thermal switch, rheostat controller, and 3-prong power cord
- Class H motor insulation is rated to withstand high heat levels up to 392 degrees Fahrenheit
- Magnetic thermostat switch enables automated, hands-free operation as the fireplace heats up and cools down
- Noise-reduction padding helps dampen mechanical vibration against the metal firebox base
- Variable speed controller allows users to balance airflow volume against operational fan sound
Cons
- Compatibility is limited to specific gas fireplace models and requires cavity dimensions to be checked before purchasing
- Requires an accessible 115-volt grounded electrical outlet inside or near the fireplace lower access panel
- Circulates ambient fireplace heat only and does not generate independent warmth without an active flame
The Aipoilk FK24 Fireplace Blower Fan Kit is a specialized aftermarket heating accessory designed for owners of compatible gas fireplaces, including popular units from Majestic, Vermont Castings, Temco, and Northern Flame. In many factory gas fireplace installations, heat naturally rises into wall cavities or remains trapped within the lower and rear sheet-metal chambers. This kit addresses that issue by providing active convection, drawing cooler room air underneath the firebox, passing it over heated exchange surfaces, and pushing warm air directly into the living area.
Airflow performance centers around a 100 percent ball-bearing motor that produces up to 130 CFM at 3000 RPM. Rather than running continuously at a single fixed output, the kit includes two key operational controls: a magnetic thermostat sensor and a full-range rheostat. The magnetic sensor attaches directly to the metal firebox floor, automatically closing the circuit once operating temperatures are reached and shutting the fan off after the fire goes out and the unit cools. The variable speed rheostat gives the user direct manual control over fan speed, making it straightforward to prioritize maximum airflow during cold snaps or slower, quieter circulation during movie nights.
Construction quality is tailored for the harsh thermal environment found beneath a gas fireplace burner pan. The motor features Class H insulation rated up to 392 degrees Fahrenheit (200 degrees Celsius), guarding against thermal degradation during extended burn cycles. The assembly utilizes counter-clockwise rotation and is mounted on a galvanized metal bracket. To minimize hum and rattling, the bracket is pre-fitted with noise-reduction padding, ensuring that vibration is isolated from the fireplace frame.
Regarding dimensions and setup, the complete assembly measures 14.9 inches long, 4.15 inches wide, and 3.3 inches high when mounted to its bracket, with an air discharge opening of 9.57 inches. The bare blower measures 12.5 inches by 3.73 inches by 3.23 inches. It plugs into a standard 115-volt grounded receptacle via an included heavy-duty 3-prong power cord, drawing a modest 35 watts and 0.35 amps. Installation generally involves sliding the blower into the lower access cavity beneath the burner pan, positioning the magnetic thermostat in contact with the warm firebox bottom, and plugging into the fireplace junction box.
While this kit fits a wide range of Majestic models such as the 36BDVR, 33BDVR, 39BDVR, 36LDVR, and DVB series, it is not a universal blower. Homeowners must verify their specific fireplace model number and measure their lower access compartment before ordering. Additionally, the installation requires that your gas fireplace has a functioning 115V power receptacle installed in the control compartment. Like any forced-air fan, it does not produce heat by itself, nor will it alter the factory BTU rating of your gas burner.
For homeowners looking to maximize the heating effectiveness of an existing Majestic, Vermont Castings, or Temco gas fireplace, the Aipoilk FK24 kit provides a practical, full-featured solution. By combining automated thermostatic control, adjustable speed settings, and heat-resistant construction, it helps transform an ambiance-heavy gas fireplace into an effective zone-heating asset.
Compatibility verification is essential before purchasing the Aipoilk FK24 kit. This blower assembly is manufactured to fit an extensive list of Majestic gas fireplace models, including 33XDV, 36XDV, 39XDV, 360DVS, 36CFDV, 33BDVR, 36BDVR, 39BDVR, 43BDVR, 33BDVT, 36BDVT, 39BDVT, 43BDVT, 36CDVX, 36CDVZ, A232, BC36, BC36i, BC42, BC42i, BHDR36, BHDT36, D232, DBR33, DBR36, DBR39, DBT33, DBT36, DBT39, 300DVB, 400DVB, 500DVB, 600DVB, 300DVBH, 400DVBH, DVB4136, DVR33, DVR36, DVR39, DVBR36, DVBR42, DVRT36, DVRT39, DVRT41, DVRT43, DVT36, DVT39, DVT43, DVTS2, DVRSL, DVRSR, FSUV, DV360, DV580, 33LDVR, 36LDVR, 39LDVR, 43LDVR, 33LDVT, 36LDVT, 39LDVT, and 43LDVT models.
The unit also cross-references multiple industry replacement part numbers, including FK24, Rotom HB-RB65, R7-RB65, 54103, EM3030LH-85, HEB30, and QLN65/2400-3030. Always confirm the model number on your fireplace rating plate located in the lower control compartment to ensure proper alignment and physical clearance.
The Aipoilk FK24 operates on a standard 115-volt AC supply at 60 Hz, pulling approximately 0.35 amps and consuming 35 watts of electricity. The included heavy-duty grounded power cord features a standard North American 3-prong plug designed to connect directly into the factory junction box found in most gas fireplace base cavities.
The fan motor runs up to 3000 RPM, producing a rated airflow capacity of 130 CFM through a 9.57-inch discharge opening. Thermal durability is supported by Class H motor insulation rated up to 392 degrees Fahrenheit (200 degrees Celsius), ensuring long-term resilience against radiant heat generated by the firebox above.
Pros
- Direct compatibility with Majestic MBU36, MBU36I, MBUC36, and MBUC36I models
- Comes complete with dedicated upper and lower track rails
- Clean black finish matches existing factory fireplace frames
- Saves time compared to modifying universal aftermarket fireplace door kits
Cons
- Strict model-specific fit with zero compatibility for non-listed Majestic models or other brands
- Requires buyers to locate and verify the metal firebox rating plate prior to ordering
- Manufacturer data does not specify glass thickness or detailed hardware fastener specifications
The KEZATAAK Fireplace Glass Doors in black finish are engineered specifically as direct replacement doors for select factory-built Majestic fireplaces. If you own an existing home with a Majestic MBU36, MBU36I, MBUC36, or MBUC36I firebox and have cracked glass, bent frames, or missing doors, this dedicated kit provides an exact fit without requiring custom metal fabrication or universal door modifications.
Proper fit is the most critical factor when replacing glass doors on manufactured fireplaces. Factory-built fireboxes require doors engineered to snap into their specific track dimensions, and these KEZATAAK replacement doors come complete with the matching upper and lower rails needed to establish the mounting tracks. This inclusion allows you to replace worn or damaged original tracks alongside the door assemblies, restoring smooth opening and closing functionality.
In terms of appearance and construction, the black finish offers a clean, traditional look that integrates neatly with the interior sheet metal and exterior face of the Majestic firebox. Enclosing the fireplace with glass doors when the unit is not burning also helps present a tidier hearth, preventing the empty interior of the firebox from remaining completely exposed to the living room.
Installation requires verifying your specific model number before proceeding with setup. As the manufacturer explicitly highlights, these doors will only fit the four designated Majestic models. Homeowners can locate their unit model number, manufacturing date, and serial number on the metal specification tag, which is typically riveted or attached to the inside sheet metal wall of the firebox or behind the lower louver area.
A clear limitation of this product is its lack of universal flexibility. These doors cannot be used on other 36-inch models within the Majestic lineup or on fireplaces from other brands like Superior, Heatilator, or Martin. In addition, detailed specifications regarding glass thickness, hinge hardware, and included screw fasteners are not listed in the product data, meaning you may need to reuse existing firebox screws depending on your current installation.
For owners of Majestic MBU36, MBU36I, MBUC36, or MBUC36I fireplaces, this KEZATAAK door set provides a straightforward, model-matched replacement option. As long as you take the time to confirm your firebox model on the interior rating tag, this kit offers a dependable way to refresh and complete your hearth.
Compatibility for these replacement glass doors is strictly limited to four specific Majestic fireplace models: MBU36, MBU36I, MBUC36, and MBUC36I. They are not universal fireplace doors and should not be purchased for any other model, size, or brand.
To confirm compatibility before buying, check the inside sheet metal wall of your firebox for a metal identification plate or rating tag. This tag lists the manufacturer make, exact model number, and manufacturing date. If your model tag does not show MBU36, MBU36I, MBUC36, or MBUC36I, these doors will not mount properly.
This replacement door package includes both the upper and lower mounting rails, which serve as the alignment tracks for the glass door assembly. Having both rails included ensures that worn, bent, or missing original tracks can be replaced at the same time.
Installation generally involves securing the upper and lower rails directly into the pre-drilled or designated mounting points on the Majestic firebox frame before inserting the door pivot pins or rollers into place. Always verify that your fireplace is cool and that the tracking rails are level and parallel before securing the glass panels.
Pros
- Exact-match replacement for hard-to-fit zero-clearance Majestic 36-inch fireplace models
- Smooth-gliding bi-fold doors swing open a full 90 degrees for tending fires and cleaning ash
- Matte black anodized-aluminum frame provides clean styling and resists corrosion
- Includes 3/16-inch tempered safety glass with safe, finished edge work
Cons
- Strict model restriction: will not fit any fireplace make or model outside the specified Majestic list
- Doors must remain fully open while a fire is actively burning to prevent heat buildup and glass damage
- Requires checking the interior metal firebox identification plate before purchasing to confirm model match
The EZ-FIT Prefab Fireplace Door is an inside-fit replacement door assembly engineered specifically for homeowners with select 36-inch Majestic zero-clearance, factory-built fireplaces. Finding aftermarket doors that correctly fit older prefabricated fireboxes can be challenging, and this unit solves that problem by matching factory dimensions for a targeted group of Majestic models. It serves existing fireplace owners looking to upgrade damaged doors, modernize an open hearth, or cut down on room drafts when the fireplace is not in use.
Compatibility is strictly restricted to Majestic model numbers MBU36, MBU36I, MBUC36I, MB36, MBUC36, RC36, and R36. The published dimensions of 36 inches wide by 21 1/2 inches high reflect the actual firebox opening size rather than the outer frame of the door itself. The manufacturer crafts the door frame up to 1/4 inch smaller than the opening to provide necessary clearance during installation and allow for thermal expansion. Spaced gaps along the sides are intentionally built into the design to maintain airflow balance and assist in reducing chimney heat loss when closed.
Structural durability comes from a 1 1/8-inch matte black anodized-aluminum frame paired with 3/16-inch clear tempered safety glass. The anodized finish resists scratching, corrosion, and discoloration from standard hearth exposure, while the tempered glass features smoothed, finished edges for safe daily handling. The doors utilize a smooth tracked bi-fold mechanism that folds neatly out of the way, opening to a full 90 degrees so the firebox remains unobstructed for loading logs and cleaning ashes.
Mounting is designed to be straightforward for homeowners, requiring only a standard drill and a screwdriver to complete the inside-fit attachment. Because the unit weighs approximately 35 pounds and mounts entirely within the interior perimeter of the firebox, no exterior masonry demolition or facing alteration is necessary. Maintaining the glass involves routine wiping with non-abrasive fireplace glass cleaner once the panels have cooled completely.
Operating safety requires strict adherence to manufacturer clearance and burning guidelines. The glass bi-fold doors must remain fully opened whenever a fire is actively burning in the firebox, as closing them during combustion can cause severe heat buildup and potential glass failure. Additionally, buyers must locate and verify the metal data plate stamped inside the firebox wall before ordering, as this door will not mount properly on other brands or non-listed Majestic models.
Overall, the EZ-FIT replacement door provides a high-value, model-exact solution for restoring functionality and visual appeal to compatible Majestic 36-inch fireplaces. Backed by a 2-year warranty on materials, workmanship, and glass, and manufactured in the USA, it delivers reliable fitment and clean lines without the expense of custom metal fabrication.
This door system is designed strictly for inside-fit installation within specific 36-inch Majestic zero-clearance fireboxes. The 36-inch by 21 1/2-inch specification represents the interior opening dimension of the fireplace.
Actual product dimensions may be up to 1/4 inch smaller to provide necessary installation tolerance and allow proper alignment. Small, evenly spaced gaps on the sides are an intentional design feature engineered to accommodate thermal expansion and prevent frame binding.
Safety regulations require that the bi-fold doors remain completely opened whenever a fire is burning. Closing the tempered glass doors while wood or fuel is actively combusting traps extreme heat, which risks shattering the glass or damaging the prefab firebox.
The panels are fabricated from 3/16-inch clear tempered safety glass with smoothed finished edges, minimizing the risk of sharp edge exposure during cleaning, log handling, or daily use.
The EZ-FIT door includes a 2-year manufacturer warranty covering defects in materials, workmanship, and the tempered glass panels.
Crafted in the USA, the assembly offers dedicated fitment assistance for buyers needing help locating their firebox model tag prior to installation.
Pros
- Complete kit containing the remote, RF module, auxiliary control module, and power wiring
- Direct compatibility with select IntelliFire Touch models across Majestic, Heat N Glo, and Quadra-Fire brands
- Includes four AAA batteries and a docking station for convenient handheld placement
- Packaged with manufacturer installation instructions for proper component pairing
Cons
- Restricted to compatible IntelliFire Touch systems and will not work with standard millivolt or non-HHT fireplaces
- Requires physical access and wiring into the fireplace control compartment to connect the auxiliary and RF modules
- Carries a higher initial cost than generic universal on-off remotes due to specialized system integration
The Majestic RC400 IntelliFire Touch Remote Control (Part #IFT-RC400) is a specialized wireless management kit engineered for compatible gas and hearth appliances manufactured across Hearth and Home Technologies brands, including Majestic, Heat N Glo, and Quadra-Fire. This package best suits homeowners, remodelers, or maintenance shoppers who need to replace a lost or malfunctioning remote, or who are outfitting an IntelliFire Touch fireplace with compatible handheld and module controls.
Designed to interact directly with the IntelliFire Touch operating platform, this kit expands physical fireplace control beyond basic wall switches. The RC400 package pairs a handheld wireless transmitter with a dedicated radio frequency module to communicate commands directly to the hearth setup. The included docking station offers a stationary resting place on a wall or nearby surface when the handheld unit is not in active use.
The package is built around genuine components specified for IntelliFire Touch platforms. Inside the box, buyers receive the primary IFT-RC400 remote control (part SRV2326-110) in a black casing, the wall-mount radio frequency module (IFT-RFM, part SRV2326-120), four AAA batteries, the auxiliary control module (IFT-ACM, part SRV2326-150), and the dedicated power cable (part SRV2326-152) that connects the AC receptacle to the auxiliary module. The remote housing and dock feature clean lines intended to sit unobtrusively on a mantel, side table, or wall cradle.
Setup involves more than simply inserting batteries into the handheld unit. Because the package includes both the RF module and the auxiliary control module, installation requires accessing the fireplace control compartment or junction area to properly connect the wiring harness and power cables according to the included RC400 installation manual. Fireplace owners should ensure safe power isolation prior to connecting control modules, or consider consulting a qualified hearth technician if unfamiliar with appliance electrical compartments.
The primary limitation of the RC400 kit is its strict compatibility boundary. It is engineered exclusively for units utilizing the IntelliFire Touch control architecture and will not operate standard millivolt valves, legacy standing pilot systems, or non-HHT electronic ignition systems. Before purchasing, owners must consult their appliance rating plate, model number, and existing control board configuration to verify that the unit accepts the IFT-RC400, IFT-RFM, and IFT-ACM components.
For owners of compatible Majestic, Heat N Glo, or Quadra-Fire fireplaces with IntelliFire Touch systems, the RC400 kit represents an authentic, comprehensive control replacement. Its inclusion of the auxiliary module, RF module, power cable, and batteries provides the core hardware required in a single package, eliminating the guesswork of sourcing individual replacement sub-assemblies.
Compatibility for the RC400 kit is strictly limited to Hearth and Home Technologies (HHT) appliances equipped with the IntelliFire Touch (IFT) system. Supported brands explicitly include Majestic, Heat N Glo, and Quadra-Fire units designed for IFT integration.
This kit includes specific part numbers: IFT-RC400 Remote Control (SRV2326-110), Wall Mount Radio Frequency Module IFT-RFM (SRV2326-120), IntelliFire Touch Auxiliary Control Module IFT-ACM (SRV2326-150), and the AC power connection cable (SRV2326-152). Buyers should check their fireplace user manual or component label to confirm these exact part numbers match their appliance requirements before ordering.
Installation of the Majestic RC400 kit requires integrating the auxiliary control module (IFT-ACM) and radio frequency module (IFT-RFM) into the fireplace appliance control cavity. The included power cable connects the AC receptacle directly to the IFT-ACM module.
The handheld remote operates on the four included AAA batteries and rests within the provided docking station. Always follow the included RC400 Remote Install Manual for specific wiring, module mounting, and initial pairing procedures, and disconnect electrical power to the hearth appliance before performing any component wiring.
Pros
- Authentic OEM HHT component guarantees direct fit without bracket modification on compatible models
- Supports multiple major brands including Majestic, Monessen, Temco, and Vermont Castings
- Specifically calibrated for natural gas operating requirements
- Restores dependable pilot ignition on older or malfunctioning gas fireplace units
Cons
- Engineered strictly for natural gas and cannot be used on liquid propane (LP) lines without manufacturer-approved conversion
- Not a universal pilot assembly, requiring buyers to verify part number 10002264 in their appliance manual
- Gas line disconnection and installation typically require a qualified gas professional to ensure leak-free operation
The Majestic 10002264 Pilot Assembly NG is an original equipment manufacturer (OEM) replacement part produced by Hearth & Home Technologies (HHT) for natural gas fireplaces, stoves, and inserts. Designed to service select models across the Majestic, Monessen, Temco, and Vermont Castings brand lines, this pilot assembly is best suited for homeowners, property managers, or service technicians seeking a direct-fit factory component to restore proper ignition and steady pilot flame performance.
Functionally, the pilot assembly serves as the ignition heart of a gas fireplace burner system. When an existing pilot assembly suffers from carbon accumulation, damaged wiring, or bent brackets, the fireplace may struggle to ignite or fail to keep the pilot lit. Because this unit is designated specifically for natural gas (NG), it features factory-calibrated fuel delivery suited to standard natural gas pressures, providing the dependable ignition flame necessary to engage the main burner smoothly.
In terms of construction, this component is an authentic HHT assembly built to factory standards. It measures approximately 5.12 inches long, 3.54 inches wide, and 0.83 inches deep, with a total weight of roughly 0.5 pounds. The bracket is finished with a durable black protective coating, designed to withstand the high-temperature environment of the gas burner pan while keeping the pilot hood and sensor leads firmly secured in their intended orientation.
Installing a replacement gas pilot assembly involves disconnecting the appliance from the gas supply line, unthreading the pilot tube fitting, and detaching the mounting bracket from the burner base. Because natural gas lines and combustible components are involved, proper safety protocol requires shutting off the gas supply and verifying all connections with a bubble leak check or combustible gas detector before re-lighting the fireplace. Homeowners uncertain about gas line work should engage a licensed gas technician to complete the swap.
The primary limitation of this component is fuel specificity and model compatibility. This assembly is engineered strictly for natural gas and is not compatible with liquid propane (LP) systems unless designated by an approved conversion configuration. Additionally, while it fits many Majestic, Monessen, Temco, and Vermont Castings units, it is not a universal part for all models under those brands. Verifying the exact part number 10002264 against your fireplace user manual or rating plate is essential prior to purchase.
For owners of compatible HHT gas appliances experiencing pilot flame degradation or ignition failures, the Majestic 10002264 pilot assembly offers a straightforward path back to dependable operation. Choosing a genuine OEM assembly eliminates mounting guesswork and restores the precise component geometry required for safe, reliable natural gas hearth heating.
Compatibility for part number 10002264 is tied directly to select natural gas fireplaces, stoves, and inserts manufactured under the Hearth & Home Technologies umbrella, including Majestic, Monessen, Temco, and Vermont Castings. Because pilot brackets and sensor geometries differ across various fireplace vintages, you should always check the parts list in your unit manual or cross-reference the data rating tag located near the control compartment before ordering.
This part is not a universal gas pilot assembly. Using it on unlisted brands or incompatible chassis designs may prevent proper burner ignition or lead to incorrect flame impingement. Always confirm that your appliance specifically calls for OEM part number 10002264.
This pilot assembly is configured specifically for natural gas (NG) installations. Natural gas operates under different line pressures and requires different orifice sizing than liquid propane (LP), meaning this part must never be installed on a propane fuel line without manufacturer-approved conversion hardware.
Working on gas fireplace components requires closing the shutoff valve and ensuring the appliance is completely cool. After securing the assembly to the burner chassis and tightening the gas pilot tube, an approved non-corrosive leak detection solution should be applied to all gas joints to verify a leak-free seal before lighting the pilot.
Pros
- Specifically engineered to fit select 42-inch Majestic zero-clearance fireplace models
- Package includes the necessary upper and lower replacement mounting rails
- Classic black finish matches standard factory firebox frames
- Clear compatibility guidelines help prevent ordering errors on incompatible 'A' series models
Cons
- Strictly non-universal and incompatible with any model not explicitly listed
- Does not fit popular revision models including the Majestic SR42A or SC42A
- Requires inspecting the inner firebox metal tag prior to purchase to confirm exact model designation
Pathline Products replacement fireplace glass doors in black are engineered specifically for homeowners and property managers maintaining select 42-inch Majestic factory-built fireplaces. Rather than attempting to force a universal-fit door onto a pre-engineered zero-clearance cabinet, this set serves as a direct hardware replacement for specific discontinued or older Majestic models, including the BR42, BC42, and SC42 series.
In terms of practical functionality, fireplace glass doors help complete the front profile of a manufactured firebox while helping restrict open-hearth drafts when the fireplace is not actively burning. This set comes equipped with dedicated upper and lower mounting rails, allowing the glass panels to guide smoothly along the designated factory path within the fireplace frame.
The build centers on framed glass panels coated in a standard black finish designed to blend seamlessly with the interior sheet-metal surround of the Majestic fireplace. The inclusion of matching top and bottom track components ensures that homeowners replacing bent, corroded, or missing factory tracks receive a complete mounting framework alongside the glass panels.
Installation requires matching the hardware to the pre-existing mounting configuration of your specific firebox. To ensure a correct fit, buyers must locate the manufacturer rating plate typically stamped on the inner sheet-metal sidewall of the firebox. Models confirmed to fit this assembly include the BR42, BC42, BE42, SR42, SC42, NVBC42, NVBR42, NVSC42, and NVSR42.
The primary limitation of this product is its strict lack of universal compatibility. Factory-built fireplaces have precise engineering tolerances, and Pathline explicitly warns that these doors will not fit revised model variants such as the Majestic SR42A or SC42A. Attempting to install them on unlisted Majestic models or other fireplace brands will result in hardware misalignment.
For owners of the exact supported Majestic 42-inch units, this Pathline Products door set provides a straightforward way to refresh an aging hearth front without undertaking expensive firebox modifications. Verifying your firebox model tag before purchasing remains the essential step to ensure proper track fit and door operation.
Confirmed compatible models include Majestic BR42, BC42, BE42, SR42, SC42, NVBC42, NVBR42, NVSC42, and NVSR42.
Explicit incompatible models include the Majestic SR42A and SC42A revisions, as well as any other firebox brand or series not listed in the specifications.
To verify compatibility before purchasing, locate the metal rating plate attached to the inside sheet metal wall of your fireplace firebox and confirm your exact model code matches one of the approved models.
This kit includes both the upper and lower replacement rails required to install the glass doors within the factory-built firebox opening.
Because manufactured fireplaces rely on precise track alignment, installing the included rails into the designated mounting positions ensures proper door glide and alignment with the fireplace frame.
Pros
- Complete all-in-one replacement package eliminates the need to source thermocouple and thermopile parts separately.
- Comes ready for liquid propane but includes a natural gas orifice for flexible fuel conversion.
- Generous lead lengths provide sufficient reach for firebox routing on standard hearth appliances.
- Durable copper pilot hood and sturdy mounting bracket promote dependable spark positioning.
Cons
- Requires manual nozzle replacement to convert from propane to natural gas operation.
- Not a universal fit; exact fireplace model numbers must be verified against original parts manuals.
- Gas component installation carries inherent safety risks and may require a qualified gas technician.
The Lamudo Propane and Natural Gas Pilot Assembly is an aftermarket replacement part built for homeowners and technicians repairing select gas fireplaces and freestanding stoves. Designed to replace original equipment part numbers 10002265 and 10002264, this assembly serves as a direct drop-in solution when an existing pilot fails to stay lit, cannot produce enough voltage to open the gas valve, or suffers from a damaged ignitor. It is tailored for appliances manufactured under the Majestic, Temco, Vermont Castings, HHT, Dutchwest, and Monessen brands.
Functionally, this 3-way pilot assembly restores the critical link between your gas valve and ignition system. The package includes an 18-inch flexible aluminum pilot gas line, a 26-inch thermocouple, a 33-inch thermopile generator, and a 26-inch piezo ignitor wire. When lit, the pilot flame heats both the thermocouple (which holds the pilot valve open) and the thermopile (which generates the millivolt electrical current required to trigger the main burner). Replacing all of these components simultaneously prevents the common frustration of diagnosing intermittent voltage drops across aged individual sensors.
Construction quality centers on reliable heat tolerance inside the firebox. The assembly features a stamped mounting bracket for secure attachment, paired with a durable copper pilot hood designed to direct targeted flame branches across the sensor tips and toward the burner carryover port. The wiring is insulated against ambient firebox heat, and the leads provide enough length to snake through standard hearth floor grommets to reaching underneath control compartments.
Installation is straightforward for users with basic mechanical aptitude, though safety precautions are mandatory. Before servicing any gas appliance, the gas supply shutoff valve must be turned off completely. The assembly arrives pre-fitted with a liquid propane (LPG) orifice, reflecting part number 10002265. Homeowners operating on natural gas must swap out the pre-installed nozzle for the included natural gas orifice to reflect part number 10002264. After threading the lines, securing the bracket, and connecting the spade terminals, testing all gas fittings with an approved leak detection solution is essential before lighting the appliance.
While this assembly offers broad brand support, it does have limitations that require careful verification. It does not fit every model produced by Majestic or Vermont Castings, as gas valve configurations, bracket styles, and tube lengths vary across production years. Buyers must compare the mounting flange shape, component orientation, and original part numbers in their appliance manual rather than relying solely on brand names.
For owners of compatible Majestic, Temco, Monessen, or Vermont Castings gas hearths dealing with unlit pilots or burner failure, the Lamudo Pilot Assembly represents a cost-effective, comprehensive repair kit. By packaging the pilot tube, ignitor, thermocouple, and thermopile together with dual-fuel flexibility, it eliminates guesswork and provides dependable operation backed by a 1-year manufacturer warranty.
This pilot assembly directly replaces OEM part numbers 10002265 (liquid propane / LPG) and 10002264 (natural gas / NG). It is listed as compatible with select gas fireplaces, fireplace inserts, and freestanding gas stoves from brands including Majestic, Vermont Castings, Monessen, Temco, Dutchwest, and Hearth & Home Technologies (HHT).
Because individual fireplace models utilize differing valve brackets and lead lengths, verify the exact part number listed in your fireplace owner's manual before ordering. This assembly is designed specifically for millivolt standing pilot systems and is not compatible with intermittent pilot ignition (IPI) or electronic spark-to-pilot systems.
Always shut off the main gas supply line and disconnect electrical power to the fireplace before beginning installation. Work should be completed with appropriate hand tools, taking care not to kink the copper sensor leads or the 18-inch pilot tube during routing.
When utilizing natural gas, replace the pre-installed propane nozzle with the provided natural gas orifice prior to mounting the assembly. Once installation is finished, perform a complete soap bubble or electronic gas leak check on all loosened joints before igniting the pilot. If you are unfamiliar with gas line repairs, hiring a licensed gas professional or certified hearth technician is strongly recommended.
The manufacturer provides a 1-year replacement warranty covering material defects and workmanship on the pilot assembly components. In the event of an operational issue or fitment question, customer support provides assistance within 24 hours.
Frequently Asked Questions
How do you locate the exact model number on Majestic Fireplaces?
Check the metal rating plate attached directly to the interior sheet-metal wall of the firebox or tucked behind the lower control access louver. Prefabricated zero-clearance enclosures stamp critical model codes, such as MBU36, BR42, or 36BDVR, on this tag to prevent buyers from ordering mismatched replacement doors or blowers.
Can you install glass doors on any prefab firebox from Majestic?
No, replacement glass doors only fit the exact cabinet series and opening dimensions specified on your firebox rating plate. Products like the EZ-FIT framed bi-fold assembly are engineered exclusively for specific 36-inch openings, while distinct 42-inch track systems accommodate BR42 and BC42 enclosures. Much like planning custom fireplace front options, verifying frame track alignment and factory opening dimensions is required before ordering.
What does the FK24 fireplace blower fan kit do for gas models?
The FK24 blower circulates air around the external firebox chassis using a 130 CFM ball-bearing motor to push convective warmth directly into your room. It utilizes an automatic magnetic thermostat sensor that turns the fan on only after the firebox warms up, along with a variable rheostat dial to adjust motor speed.
Are natural gas and propane pilot assemblies interchangeable for Majestic Fireplaces?
No, natural gas and liquid propane pilot assemblies operate under different fuel delivery pressures and orifice diameters. While convertible units like the Lamudo assembly provide an interchangeable burner nozzle for switching fuels, factory units such as part number 10002264 are strictly calibrated for dedicated natural gas lines.
Must fireplace glass doors remain open while burning fuel?
Yes, bi-fold glass doors installed on factory-built prefab fireplaces must remain fully opened whenever a fire is actively burning. Operating a unit with closed glass doors traps intense radiant heat within the firebox, which can shatter tempered glass panels or cause structural warping of the outer sheet metal.
How does the IntelliFire Touch RC400 remote integrate with Majestic Fireplaces in 2026?
The RC400 kit links to compatible electronic ignition systems using an auxiliary control module and radio frequency receiver. This setup delivers wireless handheld management of pilot lighting, flame height modulation, and compatible hearth accessories without requiring traditional hardwired wall switches.


Write Your Review
No reviews yet. Be the first to share your experience!