Ages 18-24? Explore Prime for Young Adults and see if you are eligible

Upgrading Your Contemporary Hearth Setup

Achieving the sleek aesthetic of a modern gas hearth takes careful planning around clearances, gas supply, and venting paths. Homeowners pursuing the look of napoleon vector linear direct vent gas fireplaces often balance complete unit installations with critical replacement hardware like pilot assemblies and specialized termination caps. A modern linear setup demands airtight coaxial venting and exact gas pressure matching, whether your home runs on natural gas or liquid propane. If you are comparing full setups with alternative systems like a contemporary gas unit, confirming framing depths and clearance to combustibles remains the top priority.

Proper maintenance also keeps high-efficiency direct-vent systems burning clean season after season. Sourcing the right components, such as a dedicated millivolt remote or an OEM side-mount pilot assembly, restores reliable flame ignition without costly guesswork. Comparing compatible gear for napoleon vector linear direct vent gas fireplaces requires matching exact part numbers, burner styles, and electrical ignition types. Whether you want to install a fresh horizontal termination or revive an existing direct-vent burner, checking manufacturer schematics ensures your fireplace operates safely and heats effectively.

1
Best Seller

Napoleon WS-100-38 Natural Gas Pilot Assembly

Napoleon
9.9 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The Napoleon WS-100-38 Natural Gas Pilot Assembly is an OEM direct-fit replacement designed for side-mount installation in direct-vent gas fireplaces. It is best suited for homeowners and technicians looking to restore reliable natural gas pilot ignition using factory-spec 24-inch component leads.
Pros & Cons

Pros

  • Direct-fit OEM replacement engineered under Napoleon part number WS-100-38
  • Integrated 24-inch lead components allow easy routing to the gas valve manifold
  • Factory-configured specifically for direct-vent natural gas applications
  • Side-mount bracket matches original equipment mounting locations

Cons

  • Configured strictly for natural gas and cannot be used in propane systems without proper conversion
  • Requires verifying your specific Napoleon direct-vent fireplace model manual before purchase
  • Gas appliance servicing typically requires professional handling for leak checking and safe operation
Detailed Review

The Napoleon WS-100-38 Natural Gas Pilot Assembly is an OEM-specified replacement component designed for direct-vent gas fireplaces. Manufactured by Allparts Equipment to meet factory specifications, this pilot assembly is intended for homeowners, landlords, or maintenance technicians working to repair an existing direct-vent Napoleon fireplace that suffers from pilot lighting issues, loose connections, or worn ignition components.

This pilot assembly functions as the critical ignition and flame-sensing source within a natural gas fireplace system. Because it is specifically built for direct-vent natural gas applications, the orifice and burner hood are calibrated for standard natural gas delivery, avoiding the soot buildup or delayed ignition that can happen with mismatched fuel components. It features a side-mount design that positions the pilot flame properly against the main burner for smooth ignition cycles.

Construction details reflect durable black-finished metal housing and components sized to handle the continuous heat of an active direct-vent firebox. The overall package dimensions measure 8 x 2 x 5 inches, and the assembly is fitted with 24-inch components, providing ample reach for routing thermopile, thermocouple, or spark wiring down through the firebox base to the lower control valve area.

Installation requires access to the fireplace burner tray and gas valve manifold. The integrated side bracket aligns with existing screw locations on compatible direct-vent fireboxes, while the 24-inch lead lengths eliminate tension on the wiring during positioning. Working on fuel lines requires turning off the gas supply and ensuring leak-free connections according to the fireplace manufacturer's maintenance procedures.

A key consideration is fuel compatibility. This unit is strictly engineered for natural gas direct-vent fireplaces and is not compatible with liquid propane setups without explicit factory conversion kits. Additionally, because Napoleon produces diverse fireplace series with distinct mounting brackets and lead lengths, buyers should cross-reference part number WS-100-38 with their appliance's original user manual or parts list prior to purchase.

For homeowners maintaining an older or malfunctioning direct-vent Napoleon natural gas fireplace, the WS-100-38 assembly provides a dependable direct-fit solution. Its OEM specifications and pre-sized 24-inch components eliminate guesswork, making it a solid replacement choice to restore reliable seasonal heating and ambiance.

Replacement Compatibility

Confirming part numbers is essential before ordering gas fireplace hardware. The WS-100-38 assembly is designed specifically as an OEM replacement for compatible Napoleon direct-vent gas fireplaces. Check your fireplace model rating plate or owner manual to verify that WS-100-38 is listed under the replacement parts diagram.

This pilot assembly features a side-mounting bracket and 24-inch components. If your direct-vent fireplace uses a top-mount pilot bracket or requires longer leads to reach the gas valve, verify fitment against the appliance manufacturer specifications before starting installation.

Fuel & Venting

This pilot assembly is configured exclusively for direct-vent fireplaces fueled by natural gas. Natural gas and liquid propane operate at different manifold pressures and require different orifice sizes, meaning this pilot should never be installed on a propane system without certified conversion equipment.

Because direct-vent fireplaces utilize a sealed combustion chamber, proper pilot alignment and tight sealing around wiring penetrations are critical for maintaining draft integrity and safe combustion.

2
Editor's Pick

WS-100-38 Direct Vent Natural Gas Pilot Assembly

Generic
9.9 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
This WS-100-38 natural gas pilot assembly is an aftermarket SIT side-mount replacement designed for compatible direct-vent gas fireplaces and Napoleon stoves. It includes the pilot tubing, spark electrode, thermocouple, and thermopile, making it a practical complete kit for homeowners and repair technicians troubleshooting pilot outage or ignition failure.
Pros & Cons

Pros

  • Includes every core ignition component: pilot hood, gas line, electrode, thermocouple, and thermopile
  • Matches an extensive list of direct-vent replacement part numbers across Napoleon and SIT systems
  • Cost-effective aftermarket alternative to purchasing individual flame sensors separately
  • Dedicated natural gas orifice setup ensures appropriate pilot flame pattern when installed in compatible appliances

Cons

  • Configured strictly for natural gas and cannot be used with propane systems without verified conversion components
  • As an unbranded replacement part, exact bracket alignment and connector threads must be matched against your existing unit prior to ordering
  • Working with gas lines and combustion components requires careful safety precautions or professional installation
Detailed Review

The WS-100-38 natural gas pilot assembly is an aftermarket replacement part engineered for direct-vent gas fireplaces, gas fireplace inserts, and freestanding gas stoves that utilize a side-mount SIT pilot bracket. This component is specifically aimed at existing gas fireplace owners, property managers, and repair technicians dealing with common pilot issues, such as a pilot flame that will not stay lit, weak millivolt output to the gas control valve, or a failed spark igniter.

In gas fireplace operation, the pilot assembly serves as the foundational safety and ignition hub. This particular unit includes the spark electrode for ignition, a thermocouple to keep the safety magnet open in manual valves, and a thermopile (generator) that produces the electrical current required to operate main burner valves and wall switches. When installed in compatible natural gas appliances, it produces the targeted pilot flame required to envelop both sensor probes while smoothly bridging the flame to the main burner tube.

The build consists of a durable metal side-mount bracket finished in silver, designed to hold the pilot hood, sensors, and ignition lead rigidly in place against combustion draft and thermal cycles. Because direct-vent fireboxes undergo repeated heating and cooling, the pre-crimped sensor leads, threaded thermocouple connection, and flexible aluminum pilot tubing provide standard mechanical connections that correspond to standard SIT gas train layouts.

Installation involves removing the glass door barrier of the direct-vent fireplace, disconnecting the old pilot tube and wiring leads from the gas valve, unbolting the side-mount bracket from the burner base, and securing this unit in the identical orientation. Because it replaces several individual components simultaneously, it eliminates the need to diagnose whether an ignition failure stems from a deteriorating thermocouple, an oxidized thermopile, or a cracked ceramic electrode insulator.

Important limitations center on fuel and mechanical fit. This pilot assembly is explicitly manufactured for natural gas fuel supplies and direct-vent setups; it must not be used on liquid propane systems without verified, appliance-approved conversions. Furthermore, while the manufacturer lists cross-compatibility with several part numbers including 30200, 700-088, 69L17, 904405, H3466, RPA020, WS100-38, 0199702, and 910-034, buyers should physically compare the mounting bracket configuration and pilot hood angle against their original equipment to verify a precise match.

Overall, this replacement pilot assembly offers a practical, budget-friendly repair solution when an existing Napoleon or SIT-equipped natural gas direct-vent fireplace suffers from pilot failure. For homeowners comfortable with gas appliance maintenance, or technicians seeking an all-in-one replacement package, it provides the essential components needed to restore reliable hearth heating without the expense of full burner replacement.

Replacement Compatibility

Compatibility verification is essential before purchasing replacement gas fireplace components. This SIT side-mount pilot assembly is listed to replace OEM part numbers 30200, 700-088 (700088), 69L17 (69L1701, 69L17_0), 904405, H3466, RPA020, WS-100-38 (WS100-38), 0199702, and 910-034.

It is commonly matched to select Napoleon gas burning stoves and direct-vent gas fireplaces utilizing standard side-mounting SIT pilot brackets. Buyers should check their appliance rating plate, owner manual, or existing pilot bracket geometry to confirm that both the mounting footprint and the natural gas designation match before beginning repairs.

Fuel & Venting

This pilot assembly is designated exclusively for natural gas direct-vent appliances. Natural gas and liquid propane operate at different line pressures and require specific orifice dimensions to maintain correct air-fuel combustion, meaning this assembly cannot be installed in propane fireplaces without factory-approved adjustments.

Because direct-vent fireplaces operate with sealed combustion chambers, maintaining an airtight firebox seal and leak-free gas connections after installing this pilot assembly is mandatory for safe operation. A gas leak test should always be performed on all fittings prior to reigniting the appliance.

3
Limited Time

Napoleon WS-100-39 Propane Gas Pilot Assembly

Napoleon
9.8 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The Napoleon WS-100-39 is a dedicated replacement propane gas pilot assembly engineered for compatible Napoleon direct-vent fireplaces utilizing a side-mount configuration. It is an ideal fix for homeowners and technicians seeking to restore reliable ignition and stable pilot flame performance on LP-fueled direct-vent hearth systems.
Pros & Cons

Pros

  • Genuine Napoleon part engineered to match factory side-mount specifications and alignment
  • Configured specifically for liquid propane direct-vent fireplace installations
  • Complete assembly format simplifies swapping out aging, corroded, or malfunctioning pilot parts
  • Restores consistent pilot flame generation and smooth main burner ignition

Cons

  • Restricted exclusively to propane gas systems and cannot be used for natural gas configurations
  • Requires fireplace owners to verify part number WS-100-39 against their specific model manual prior to purchase
  • Gas supply line connection typically requires installation by a qualified service professional
Detailed Review

The Napoleon WS-100-39 Propane Gas Pilot Assembly is an authentic replacement part designed specifically for select Napoleon direct-vent gas fireplaces fueled by liquid propane (LP). This complete assembly is intended for homeowners, property managers, and hearth technicians who need to resolve recurring pilot outages, weak ignition flames, or worn thermocouple and thermopile components on an existing side-mounted pilot bracket.

As an essential ignition component, this pilot assembly delivers the steady pilot flame required to safely ignite the main gas burner and energize the millivolt safety circuit. Because the assembly is factory-configured for liquid propane, the internal orifice is sized precisely for propane operating pressures. In sealed direct-vent fireplaces, having an exact-fit pilot assembly is vital for maintaining balanced combustion airflow and dependable flame-sensing operation.

Constructed with durable metal brackets and high-temperature ignition leads, the unit features a classic black bracket finish and measures approximately 8 by 2 by 5 inches with an overall weight of roughly 0.81 pounds. The side-mount design matches designated Napoleon firebox footprints, keeping the pilot hood and flame sensor positioned at the correct angle relative to the burner ports for smooth flame transfer.

Installing this side-mount pilot assembly requires accessing the lower firebox, shutting off the gas supply, and disconnecting the pilot tubing and wiring harnesses from the gas control valve. Because this replacement component connects directly to a pressurized gas line inside a sealed combustion chamber, leak testing is mandatory, and installation by a qualified gas technician or certified hearth professional is strongly recommended.

The main limitation of this assembly is its strict fuel and mounting specificity. It is engineered exclusively for liquid propane direct-vent models and cannot be adapted for natural gas systems without proper manufacturer conversion hardware. Furthermore, the side-mount bracket will not work in Napoleon fireplaces requiring a top-mount or rear-mount pilot bracket. Buyers should inspect their fireplace rating plate and owner manual schematics to verify that part number WS-100-39 matches their appliance requirements.

For owners of compatible Napoleon direct-vent propane fireplaces struggling with ignition failure or an uncooperative pilot flame, the WS-100-39 pilot assembly provides a direct, cost-effective replacement. It restores reliable pilot operation and burner ignition without the expense of replacing the entire fireplace burner assembly.

Fuel & Venting

The Napoleon WS-100-39 is engineered strictly for liquid propane (LP) applications. Propane operates under significantly higher manifold pressure than natural gas and requires a smaller pilot orifice to ensure clean, safe combustion. This assembly should never be connected to a natural gas line.

Direct-vent fireplaces utilize a completely sealed combustion chamber that draws fresh air from outdoors and vents exhaust outside through dedicated venting pipe. Maintaining an exact factory-spec pilot assembly inside this sealed environment ensures that draft pressures remain balanced and the pilot flame does not pull away from the sensor during operation.

Replacement Compatibility

Compatibility for the Napoleon WS-100-39 relies on three critical factors: brand, fuel type, and mounting geometry. This component is designed specifically for Napoleon direct-vent gas fireplaces that use liquid propane and call for factory part number WS-100-39.

Before ordering, check the user manual or exploded parts diagram on the appliance data plate located inside your fireplace control compartment. Verify that your unit utilizes a side-mount pilot bracket rather than a rear or bottom bracket, as bracket styles are not interchangeable across different firebox designs.

4
Top Rated

Lennox IHP 62L12 OEM Natural Gas Pilot Assembly

Pro Parts Plus
9.8 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The 62L12 Lennox IHP OEM natural gas pilot assembly restores reliable ignition to direct-vent fireplaces using an integrated 750mV thermopile generator. It is ideal for homeowners and service technicians repairing compatible Lennox and IHP natural gas appliances that specify part number 62L12.
Pros & Cons

Pros

  • Authentic OEM Lennox and IHP replacement part built to factory specifications
  • Includes the 750mV thermopile thermo-generator for standard millivolt control valve operation
  • Compact 1 x 4 x 1.5-inch dimensions match original direct-vent mounting brackets
  • Eliminates guesswork when servicing compatible Lennox natural gas direct-vent fireplaces

Cons

  • Configured exclusively for natural gas and cannot be used in liquid propane setups without verified conversion parts
  • Requires checking your fireplace model and owner manual to ensure exact part number 62L12 compatibility
  • Gas line and electrical pilot replacement requires careful handling and may necessitate qualified professional service
Detailed Review

The 62L12 Lennox IHP OEM Natural Gas Pilot Assembly is a factory-designated replacement component for Lennox and Innovative Hearth Products (IHP) direct-vent gas fireplaces. If an existing natural gas unit experiences a weak pilot flame, fails to generate sufficient voltage to open the gas valve, or will not stay lit, this assembly serves as an exact-fit replacement. It best suits homeowners, landlords, and hearth maintenance specialists looking to restore an existing appliance rather than replacing the complete firebox.

Regarding performance and electrical output, this assembly features a 750mV thermopile thermo-generator. Direct-vent millivolt systems depend on the heat of the pilot flame striking the thermopile to produce millivoltage, which in turn holds open the safety magnet and triggers the main gas valve upon command. Supplying standard 750mV generation ensures reliable communication with wall switches, remotes, and millivolt wall thermostats.

The build quality reflects OEM manufacturing standards for Lennox and IHP hearth equipment. Measuring roughly 1 x 4 x 1.5 inches with a dark finish, it integrates cleanly into the burner pan assembly without altering the visual appearance of the ember bed. Its pilot hood, bracket, and thermopile construction are specifically designed to endure the high internal operating temperatures of sealed direct-vent fireboxes.

Setup involves accessing the fireplace burner floor behind the direct-vent glass panel. Because this replacement component connects directly to the pilot gas tube and millivolt control valve terminals, careful alignment and proper gas leak testing are critical steps during installation. Routine maintenance is straightforward and typically involves keeping the pilot orifice and thermopile clear of dust, lint, and carbon residue during annual inspections.

The primary limitation is fuel specificity. This assembly is factory-built strictly for natural gas (NG) applications and is not compatible with liquid propane (LP) systems without appropriate factory-approved conversion hardware. In addition, direct-vent fireplace models vary widely in bracket geometry and tube length, meaning buyers must consult their fireplace rating plate and user manual to confirm that 62L12 is the correct part number.

For owners troubleshooting a malfunctioning Lennox or IHP direct-vent hearth appliance, the OEM 62L12 pilot assembly delivers a dependable, factory-standard solution. Once natural gas fuel compatibility and part number requirements are verified, this assembly provides an effective way to restore smooth ignition and dependable warmth to your living space.

Replacement Compatibility

This pilot assembly matches Lennox and IHP part number 62L12. It is engineered specifically as an original equipment manufacturer replacement for designated direct-vent natural gas fireboxes across the Lennox and IHP family of brands.

Direct-vent fireplace models utilize specific pilot brackets, tube routings, and orifice sizes. Before ordering, locate the rating plate inside your fireplace control compartment or consult your owner manual to confirm that part number 62L12 is explicitly listed for your exact model.

Fuel & Venting

This pilot assembly is configured exclusively for natural gas (NG). It should not be connected to liquid propane (LP) fuel supplies unless documented conversion procedures and authorized conversion orifices are utilized.

The assembly is rated for direct-vent hearth applications, which feature a sealed glass front and coaxial venting that draws combustion air from outdoors while expelling exhaust gases outside the home.

5

Napoleon F45 Hand Held Fireplace Remote Control

Napoleon
9.8 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The Napoleon F45 is a handheld remote control kit designed specifically for millivolt gas valve fireplaces, providing straightforward wireless on/off operation and an integrated room temperature display. It is an ideal solution for gas fireplace owners looking to replace a lost controller or add convenient armchair operation to a compatible hearth.
Pros & Cons

Pros

  • Dedicated on/off wireless control tailored specifically for millivolt gas valve fireplaces
  • Includes both transmitter and receiver for a complete replacement or initial setup
  • Built-in digital display provides at-a-glance room temperature readings
  • Simple push-button layout makes everyday fireplace operation straightforward

Cons

  • Designed strictly for millivolt gas valves and will not function with IPI or 120V electric units
  • Limited to standard on/off functionality without advanced flame modulation or thermostatic cycling
  • Specific fireplace valve terminals and wiring compatibility must be confirmed prior to purchase
Detailed Review

The Napoleon F45 Hand Held Fireplace Remote is a dedicated wireless control kit engineered specifically for gas hearth appliances equipped with millivolt gas valves. Combining a handheld transmitter with a matching receiver, this package allows homeowners to start and shut down their fireplace flame from the comfort of a chair. It is especially well suited for existing fireplace owners replacing a failed controller, remodelers completing a millivolt gas insert setup, or anyone wanting to avoid bending down to reach lower fireplace access switches.

Regarding practical performance, the F45 focuses on dependable on/off command execution. In addition to switching the burner flame, the handheld unit features a large, easy-to-read digital screen that displays both operating status and current ambient room temperature. This dual readout allows users to monitor living room comfort levels at a glance without having to navigate complicated multi-tier programming menus.

The physical construction of the transmitter features a neutral black finish that blends easily with typical family room electronics and mantel surrounds. With a listed weight of approximately 0.01 pounds, the remote is exceptionally light and manageable for daily use. The listed packaging dimensions measure 9 by 5 by 9 inches, housing both the wireless transmitter and the corresponding receiver module.

Installation requires connecting the receiver unit to the appropriate millivolt terminals on the fireplace gas valve. Because millivolt valve systems rely on low-voltage currents generated by a standing pilot thermopile, proper wiring to the appliance terminals is necessary for safe and reliable signaling. Fireplace owners should review their appliance manual or work with a qualified gas technician during installation to ensure all manufacturer clearances and wiring protocols are met.

While this system delivers reliable wireless operation, buyers should keep specific technical limitations in mind. The F45 provides straightforward on/off control rather than automated thermostatic flame regulation, adjustable flame height, or programmable timer modes. Additionally, it is intended solely for millivolt gas systems and is incompatible with electronic intermittent pilot ignition (IPI) systems or standard line-voltage electric fireplaces.

For homeowners operating a compatible millivolt gas fireplace, the Napoleon F45 offers a reliable, user-friendly remote control upgrade. Its dedicated receiver, lightweight handheld transmitter, and built-in room temperature display deliver everyday comfort and practical convenience. Buyers should verify their fireplace valve type and terminal configuration before ordering to ensure seamless compatibility.

Remote & Controls

The Napoleon F45 system provides direct, handheld control tailored for gas fireplace operation. By pairing a wireless handheld transmitter with a dedicated receiver, the kit allows users to activate or extinguish the flame with simple push-button commands.

The integrated digital screen shows both system activation status and real-time room temperature. This layout gives homeowners immediate feedback on their room environment while keeping fireplace management quick and intuitive.

Replacement Compatibility

Compatibility for the Napoleon F45 is specifically restricted to gas fireplaces, stoves, and inserts utilizing a standard millivolt gas valve. Millivolt systems generate their own low-voltage power via a pilot thermopile to operate the control circuit.

This remote kit does not support electronic intermittent pilot ignition (IPI) systems, 120-volt electric fireplaces, or wood-burning appliances. Owners should confirm their appliance gas valve specifications and wiring terminal labels before purchasing.

6

Empire Boulevard 48-Inch Direct Vent Linear

Empire Comfort Systems
9.6 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The Empire Boulevard 48-inch is a direct-vent linear propane gas fireplace delivering 34,000 BTUs of supplemental heat with an included multi-function thermostat remote, matte black liner, and barrier screen. It is an ideal fit for homeowners and remodelers building a contemporary propane hearth wall who want high heating output and clean architectural lines.
Pros & Cons

Pros

  • Substantial 34,000 BTU output provides strong supplemental zone heating performance
  • Includes a multi-function thermostat remote control and matte black liner out of the box
  • Sealed direct-vent system pulls combustion air from outside to preserve indoor air quality
  • Built-in barrier screen provides essential contact protection without obstructing flame visibility

Cons

  • Crushed decorative glass media is required for operation but must be purchased separately
  • Dedicated propane configuration cannot run on natural gas without verified manufacturer conversion kits
  • Requires substantial 21 1/2-inch framing depth and licensed gas professional installation
Detailed Review

The Empire Boulevard 48-Inch Direct Vent Linear Fireplace is a built-in propane hearth appliance designed for homeowners and remodelers seeking a contemporary, wide-format focal point. Configured specifically for liquid propane systems, this linear model combines a clean 48-inch viewing area with practical heating utility. It suits modern living rooms, finished basements, and open-concept layouts where a dedicated propane supply line is accessible and a sleek architectural profile is desired.

Performance centers on a capable 34,000 BTU burner system engineered to deliver substantial supplemental warmth across living zones. Operation is managed via the included multi-function thermostat remote, allowing users to regulate target comfort levels from anywhere in the seating area. The direct-vent system operates on a sealed combustion loop, drawing exterior air for burning and expelling exhaust gases safely outdoors through dedicated venting pipe to maintain indoor air quality.

Construction quality highlights durable heavy-gauge materials suited for high-temperature gas operation. The package includes a matte black liner that lines the firebox interior, creating a deep backdrop that accentuates active flames. A factory-installed barrier screen sits over the glass opening to guard against accidental contact with hot surfaces while maintaining an unobstructed view of the burner area.

Installation requires precise rough enclosure preparation and professional gas utility hookup. The manufacturer framing specifications call for rough dimensions of 47 3/8 inches high, 67 5/8 inches wide, and 21 1/2 inches deep. Because direct-vent wall penetrations, fuel pressure guidelines, and combustible clearances must strictly follow local mechanical codes, installation by a certified gas technician is strongly advised prior to enclosing the wall framing.

A few purchasing considerations should be planned for in advance. The fireplace does not come with decorative crushed glass, which must be selected and purchased separately before operating the burner tray. Optional enhancements such as an internal circulating blower kit, accent lighting, and exterior trim packages are also sold separately. Buyers must also ensure their fuel source matches the designated propane configuration.

For homeowners with propane service looking to build a clean, contemporary media wall or living room centerpiece, the Empire Boulevard 48-inch represents a well-engineered solution. The combination of 34,000 BTU heating capacity, an included thermostat remote control, and a factory barrier screen delivers reliable heating and modern ambiance, provided the necessary media and installation requirements are budgeted accordingly.

Framing & Dimensions

Rough framing requirements for this 48-inch linear unit specify an enclosure opening of 47 3/8 inches high, 67 5/8 inches wide, and 21 1/2 inches deep. Builders and remodelers should verify all combustible clearance requirements in the official manufacturer installation manual before assembling wall studs.

The 48-inch linear view area is tailored for wide accent walls and modern open-concept floor plans. Adequate structural wall depth and appropriate non-combustible wall-board backing are required around the perimeter of the opening.

Fuel & Venting

This fireplace model is engineered specifically for liquid propane (LP) fuel systems and operates with a rated input of 34,000 BTUs. It requires professional gas piping and proper regulator line pressure verified during installation.

The direct-vent configuration relies on a sealed coaxial pipe system that exhausts combustion byproducts through an exterior wall or roof while drawing fresh air from outside. This configuration eliminates indoor drafts and maintains balanced room air quality.

Controls & Accessories

The package comes complete with a multi-function thermostat remote control, providing convenient fingertip access to flame modulation and target temperature settings from across the room.

Crushed glass media must be purchased separately to cover the burner platform. Additional manufacturer options such as forced-air blower kits, internal accent lighting, and decorative finishing trim kits are available separately to customize airflow and final aesthetics.

7

Napoleon Ascent B36 Direct Vent Clean Face Natural

AMS FIREPLACE INC.
9.5 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The Napoleon Ascent B36 (SKU: B36NTRE-1) is a direct-vent natural gas fireplace featuring a clean-face design, realistic PHAZER log set, and an electronic ignition with backup power-failure controls. It is an ideal built-in solution for homeowners and remodelers seeking a reliable, permanent gas hearth for living rooms or media spaces.
Pros & Cons

Pros

  • Louver-free clean face profile provides a modern look that integrates smoothly with custom hearth surrounds
  • Battery-backed control system provides dependable heat during winter storms and electrical power cuts
  • Adjustable flame and heat output lets you balance ambiance and supplemental warmth as conditions change
  • Exclusive PHAZER logs and glowing ember bed deliver an authentic wood-fire look without the mess of firewood

Cons

  • Configured specifically for natural gas; using liquid propane requires verifying a compatible conversion kit
  • Requires professional direct-vent pipe routing, custom framing, and licensed gas line installation
  • Product listing does not detail exact framing dimensions or BTU ratings, requiring verification with the manufacturer manual
Detailed Review

The Napoleon Ascent B36 (model B36NTRE-1) is a built-in direct-vent natural gas fireplace designed for homeowners, builders, and remodelers seeking an attractive, permanent hearth centerpiece. Styled with a clean-face frame that eliminates exterior metal louvers, this unit allows finishing materials like stone, tile, or drywall to frame right up to the firebox. It best suits property owners planning a permanent living room, family room, or media space installation connected to a residential natural gas line.

Burner performance and visual ambiance center on Napoleon's pan-style burner, which distributes gas evenly under the exclusive PHAZER log set and glowing ember bed. The included logs and ember media replicate the warm, organic glow of real firewood without requiring any ash disposal or chimney cleaning. Thanks to the built-in flame and heat adjustment controls, you can decrease the flame height on warmer evenings or increase output when supplemental comfort is needed.

For everyday operation, the electronic ignition system provides straightforward, energy-conscious startups without keeping a standing pilot flame running constantly. A critical advantage of this control layout is the backup power system, which maintains functionality during electrical blackouts. For homeowners in cold-weather regions vulnerable to winter storm outages, this feature provides practical peace of mind by keeping an active heat source operational when the main grid fails.

Because the B36 Ascent is a direct-vent appliance, it operates within a sealed combustion loop, bringing in fresh outside air for burning while safely expelling exhaust outdoors via direct-vent pipe. Planning the installation requires proper rough-framing cutouts, gas supply line plumbing, and appropriate vent pipe clearances through an exterior wall or roof. Due to the technical nature of gas lines and sealed venting, installation should be handled by a licensed professional following local building and mechanical codes.

Buyers should keep in mind that this unit is dedicated to natural gas use, and any potential conversion to liquid propane requires verifying the availability of an approved conversion kit before purchase. Additionally, exact framing dimensions, clearances to combustibles, and specific BTU ratings are not detailed in the raw listing data and must be verified in Napoleon's official product documentation before framing begins.

For remodelers and homeowners looking for a reputable direct-vent gas fireplace that blends clean architectural lines with emergency power-outage readiness, the Napoleon Ascent B36 delivers dependable warmth and a classic fire view.

Fuel & Venting

The Napoleon Ascent B36 (SKU: B36NTRE-1) is factory-configured to run on natural gas and requires a dedicated gas supply line. Direct-vent technology uses a co-axial or co-linear sealed pipe system that pulls fresh combustion air from outside the home while venting combustion gases directly outdoors, protecting indoor air quality.

Because venting routes must conform to strict horizontal and vertical length limits specified by the manufacturer, buyers should verify framing depth, chase clearances, and exterior termination locations with a certified gas professional prior to installation.

Flame & Controls

This fireplace utilizes an electronic ignition mechanism paired with a pan-style burner for smooth, reliable ignition. Inside the sealed combustion chamber, Napoleon's PHAZER log set and glowing ember bed create a natural flame pattern with realistic depth and glow.

Flame and heat adjustment controls allow users to tailor both the flame height and heating output to match room comfort requirements. An integrated backup control system ensures that the fireplace remains functional during electrical outages, delivering dependable heat when household power is lost.

8

Zhenx 46DVA-HC 4" x 6 5/8" Direct Vent Horizontal

Zhenx
9.4 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The Zhenx 46DVA-HC Horizontal Square Termination Cap is a heavy-gauge galvanized steel vent cover engineered for 4-inch by 6-5/8-inch coaxial direct-vent gas fireplaces and stoves. It is an ideal exterior venting solution for homeowners and remodelers needing a sturdy, weather-resistant replacement cap for horizontal wall terminations.
Pros & Cons

Pros

  • Heavy-duty galvanized steel build with double-welded seams provides dependable resistance against outdoor weather and heat.
  • Thick 0.07-inch spigot wall and 13.7-pound weight minimize wind rattle and structural flexing.
  • Pre-drilled 12-hole flange with oversized clearance holes allows straightforward leveling and alignment on exterior surfaces.
  • Directly matches the 4-inch by 6-5/8-inch coaxial dimensions commonly utilized in 46DVA-HC venting runs.

Cons

  • Limited strictly to 4-inch by 6-5/8-inch coaxial pipe runs; will not fit 5-inch by 8-inch direct-vent or standard B-vent setups.
  • Does not include wall thimbles, firestops, or internal pipe lengths, which must be purchased separately.
  • At nearly 14 pounds, secure structural backing or heavy-duty anchors are required on exterior wall sidings.
Detailed Review

The Zhenx 46DVA-HC Horizontal Square Termination Cap is an exterior duct termination designed specifically for direct-vent gas fireplaces and gas-fired heating stoves. Tailored for homeowners, remodelers, and property managers completing a horizontal venting setup, this cap serves as the critical exterior junction that seals your appliance's venting circuit while allowing proper combustion exhaust and fresh air intake.

Functionally, direct-vent gas appliances rely on a coaxial design where combustion air enters through the outer 6-5/8-inch diameter ring while exhaust exits through the inner 4-inch pipe. This horizontal square cap maintains that balanced airflow while shielding the wall penetration from rain, exterior debris, and adverse downdrafts. The aerodynamic louvered housing keeps exhaust gases moving away from exterior wall finishes without choking burner draw.

Build quality is a distinct asset on this unit. Rather than utilizing lightweight stamped aluminum, Zhenx constructs this cap from heavy-gauge galvanized steel. All critical stress points feature double-welded seams to resist warping under hot exhaust conditions or cold outdoor weather. The round spigot features a sturdy 0.07-inch wall thickness, bringing the overall weight of the assembly to 13.7 pounds for superior rigidity and impact resistance.

Installation is configured around a bolt-on perimeter flange measuring 13-1/2 inches square, with an overall cap depth of 12-1/2 inches. The mounting flange includes 12 pre-tapped holes, three per side, backed by slightly oversized clearance openings that make leveling easy against uneven exterior surfaces like siding, brick, or stucco. The included fastener kit handles mounting directly to structural framing.

Before purchasing, homeowners must verify their vent piping system dimensions. This cap is designed for 4-inch by 6-5/8-inch direct-vent piping (such as 46DVA-HC runs) and is entirely incompatible with 5x8 direct vent lines, B-vent chimneys, or wood-burning stove pipes. Exterior wall thimbles and interior pipe sections are not included and must match the clearance requirements outlined in your gas fireplace manual.

For owners of compatible direct-vent gas fireplaces seeking a rugged, wind-resistant replacement cap or remodeling component, this Zhenx horizontal termination cap offers solid structural reliability. Its heavy-duty steel body and reinforced mounting frame provide lasting protection for your home's exterior venting penetration.

Fit & Dimensions

This horizontal termination cap is engineered for direct-vent gas appliances requiring 4-inch inner exhaust and 6-5/8-inch outer intake coaxial piping. The round spigot connector measures 6-5/8 inches in outer diameter to interface directly with standard 46DVA-HC duct profiles.

The square exterior base plate measures 13-1/2 inches wide by 13-1/2 inches high, while the overall exterior depth from the mounting surface to the front edge of the hood is 12-1/2 inches. Total unit weight is 13.7 pounds, reflecting its heavy-gauge steel construction.

Always verify the outer pipe diameter of your existing gas fireplace or stove pipe before ordering, as termination caps must match the appliance manufacturer's specified venting diameter exactly to maintain safe combustion.

Fuel & Venting

This termination cap is designated exclusively for direct-vent natural gas and liquid propane appliances. Direct-vent configurations operate as sealed combustion systems, drawing fresh outdoor air through the outer collar while venting combustion byproducts through the center pipe.

This component must never be used with vent-free appliances, wood-burning fireplaces, pellet stoves, or Type B gas vent systems. Modifying this cap to fit non-coaxial venting can cause severe drafting issues or hazardous exhaust leaks.

Ensure your installation complies with the appliance manufacturer's minimum and maximum horizontal venting lengths, rise-to-run ratios, and termination clearances relative to doors, windows, and soffits.

Installation & Mounting

Mounting is accomplished via a bolt-on perimeter base featuring 12 pre-drilled holes, divided evenly with three holes on each side. The oversized clearance design accommodates minor shifting during alignment against exterior wall studs or backing blocks.

An exterior wall thimble should be installed in the wall framing to maintain required clearances to combustible materials before attaching this exterior cap. High-temperature exterior silicone sealant is generally recommended around the mounting perimeter to prevent water intrusion into the wall cavity.

Because the unit weighs 13.7 pounds, mounting screws must bite securely into solid exterior framing or wall anchors rather than hanging solely from vinyl or aluminum siding.

Frequently Asked Questions

How does direct vent technology work in linear gas fireplaces?

Direct vent systems pull 100 percent of their combustion air from outdoors through a sealed coaxial pipe while expelling exhaust gases through the inner pipe. This sealed design prevents indoor air heat loss and stops combustion byproducts from entering your living space. For napoleon vector linear direct vent gas fireplaces, this balanced venting permits flexible horizontal venting runs through exterior walls without requiring a traditional vertical masonry chimney.

Can you convert a natural gas pilot assembly to propane for napoleon vector linear direct vent gas fireplaces?

No, natural gas and propane pilot assemblies use different orifice sizes and cannot be interchanged without correct fuel-specific hardware. Propane operates under higher pressure and requires a smaller orifice than natural gas to ensure safe combustion. Installing a dedicated propane assembly, such as the WS-100-39, prevents dangerous soot buildup and delayed ignition issues.

What venting size is required for horizontal direct-vent termination caps?

Most residential direct-vent units utilize a 4-inch inner exhaust pipe surrounded by a 6-5/8-inch outer air intake pipe. A heavy-gauge square termination cap, such as the 46DVA-HC, connects directly to this coaxial pipe size on an exterior wall. Checking your specific fireplace manual ensures the termination cap matches the exact duct diameter and weather clearance specs. For rooms where venting through an exterior wall is not feasible, considering a linear wall mount electric unit offers zero-vent installation flexibility.

Will a millivolt remote control work with electronic ignition direct-vent fireplaces?

No, standard millivolt remotes like the Napoleon F45 require a self-generating thermopile millivolt gas valve and are not directly compatible with intermittent electronic ignition (IPI) control boards. Electronic ignition units rely on household electrical wiring or battery modules to trigger a spark electrode. Always match your handheld transmitter to the exact valve system listed on your fireplace rating plate.

How do framing dimensions differ between linear and traditional direct-vent fireplaces?

Linear direct-vent fireplaces require significantly wider and shallower wall openings compared to standard square or clean-face units. A 48-inch linear unit often requires framing widths exceeding 67 inches to accommodate internal heat barriers and clearance zones. Traditional clean-face boxes prioritize vertical height over width. Always verify rough-opening framing dimensions in the manufacturer manual before cutting studs.

What causes a direct-vent gas pilot light to shut off after releasing the knob?

A worn thermopile or loose thermocouple connection is the most common reason a pilot extinguishes once the control knob is released. The sensor must generate adequate millivolts to signal the safety magnet in the gas valve to stay open. Inspecting the lead wires and clearing carbon buildup from the pilot hood usually resolves the issue; otherwise, replacing the entire pilot assembly is necessary.