Maintaining reliable heat distribution and firebox performance often comes down to tracking down exact components that fit your specific hearth system. When upgrading or repairing your firebox setup, sourcing proper heatilator extensions for birmingham fireplace installations helps ensure smooth airflow, steady pilot ignition, and long-term durability. Gas and wood hearth appliances require tight tolerances, meaning a standard aftermarket blower or replacement thermocouple needs precise model matching before you begin any retrofit work. Pairing these upgrades with compatible Heatilator fireplace accessories creates a safer, far more functional hearth area.
Homeowners often run into issues when blower kits vibrate excessively or replacement pilot assemblies fail to match their ignition control system. Investing in components with proper thermal ratings, magnetic thermostats, and pre-wired harnesses simplifies setup while eliminating irritating rattles against sheet metal. Evaluating airflow specifications like CFM ratings alongside exact part numbers saves time and prevents unnecessary returns. Careful inspection of your unit’s serial plate ensures your heating upgrades restore steady warmth across chilly evenings.
Pros
- Complete pre-wired kit includes motor, 3-prong cord, snap-disc thermostat, and variable-speed rheostat
- Ball-bearing motor delivers 130 CFM at 3000 RPM with low vibration design
- Magnetic mounting pads simplify positioning in lower fireplace access cavities without drilling
- Automatic thermal snap disc prevents blowing unheated room air during fireplace startup
Cons
- Requires an existing 120V outlet or powered junction box inside the fireplace lower cavity
- Fits specific Heatilator and compatible models; lower cavity dimensions and access clearances must be verified before purchase
- Operating at maximum 3000 RPM produces noticeable air movement sound depending on rheostat setting
The FireplaceBlowersOnline GFK4, GFK4A, and FK4 Blower Fan Kit is a specialized aftermarket heating accessory designed to enhance air circulation for Heatilator gas fireplaces and similarly configured units. Rather than letting heat escape up the flue or remain trapped behind decorative metal panels, this blower pushes warm air directly into your living room or family room. It serves as an ideal solution for homeowners replacing a worn, noisy factory blower or adding forced-air circulation to an existing gas fireplace to maximize supplemental heat distribution.
In terms of airflow performance, the blower assembly utilizes a ball-bearing motor rated at 3000 RPM to generate up to 130 CFM of forced air. This steady volume moves trapped heat out of the lower and rear heat-exchange channels and into the living space. Thermal automation is managed by an included snap-disc thermostat, which attaches magnetically to the base of the firebox. The thermostat prevents cold drafts by waiting until the fireplace reaches operating temperature before activating the fan, and it automatically powers off once the firebox cools down after shutdown.
Build quality centers on durability and vibration dampening. Ball-bearing motors offer improved wear resistance and longevity compared to traditional sleeve bearings, especially inside the high-temperature environment of a fireplace chassis. The kit incorporates noise reduction padding along the contact points and utilizes high-strength neodymium-style mounting magnets, which secure the blower firmly against the metal floor of the fireplace cavity to minimize vibration rattles during operation.
Installation is designed for straightforward DIY setup because the system comes fully assembled and pre-wired. The package includes a standard 3-prong grounded power cord that plugs directly into the pre-installed 120V electrical junction box commonly found in the bottom cavity of gas fireplaces. Users also receive a dial rheostat for manual speed adjustment, allowing you to fine-tune the airflow rate to find the right balance between maximum air delivery and quiet operation.
Potential buyers should keep a few practical considerations in mind before ordering. The blower assembly measures 12.5 inches wide by 3.23 inches deep by 3.73 inches high, meaning you must verify that the access opening beneath your fireplace louvers provides sufficient clearance for insertion. Additionally, your gas fireplace must already have an active, powered 120V electrical outlet beneath the firebox. While the ball-bearing motor is engineered for smooth operation, running any 130 CFM fan at its maximum 3000 RPM speed will naturally produce noticeable airflow noise in a quiet room.
For owners of compatible Heatilator fireplaces seeking better heat circulation, this pre-wired blower kit offers an accessible, feature-complete upgrade. With its magnetic mounting, built-in thermal snap disc, and variable speed control, it eliminates the need for custom wiring while significantly improving the comfort of your living space during cold winter months.
The blower kit is powered by a high-velocity ball-bearing motor delivering up to 3000 RPM and 130 CFM of forced airflow. This performance level is designed to draw cooler room air beneath the fireplace, cycle it across heated metal heat exchangers, and exhaust warm air outward into the room.
To manage sound and airflow, the kit includes an inline rheostat that enables smooth, variable speed adjustment. Running the motor at lower speeds provides continuous, quiet circulation, while dialing up the rheostat maximizes warm air delivery during cold spells. The included snap-disc thermostat ensures hands-free operation by sensing firebox heat, turning the blower on only after the fireplace warms up and shutting it off after cooling.
With physical dimensions of 12.5 inches wide, 3.23 inches deep, and 3.73 inches high, this blower kit is sized to fit through standard lower access louvers on Heatilator FK4, GFK4, and GFK4A gas fireplace models. Buyers should measure their lower firebox cavity and clearance paths to confirm adequate clearance before purchasing.
The unit features a pre-wired configuration with a standard 3-prong grounded power cord, eliminating the need for wire splicing. Heavy-duty neodymium-style mounting magnets hold the blower securely to the bottom sheet metal without drilling or sheet metal screws, while noise reduction padding isolates motor vibrations from the fireplace frame.
Pros
- Direct fit for multiple Hearth & Home Technologies brands using part numbers 2090-012 or SRV2090-012.
- Includes pilot burner hood, bracket, spark electrode, and flame sensor in one pre-assembled unit.
- Significantly less expensive than original manufacturer OEM replacement kits.
- Resolves common IPI failure symptoms like sparking without lighting or failing to sense a pilot flame.
Cons
- Strictly for Natural Gas (NG) configurations and cannot be used on Liquid Propane (LP) fireplaces.
- Requires careful installation as the thin copper gas tube can kink or crack if bent too sharply.
- Incompatible with older standing continuous pilot fireplaces or hot surface ignition (HSI) modules.
The Criditpid 2090-012 IPI Pilot Assembly is an aftermarket replacement part designed specifically for natural gas fireplaces built with electronic Intermittent Pilot Ignition systems. Rather than maintaining a continuous standing flame, IPI fireplaces electronically spark the pilot only when heat is demanded, lighting the main burner and extinguishing when switched off. This replacement kit serves homeowners, landlords, and hearth repair professionals dealing with failed ignition, pilot spark failures, or worn flame sensors across Hearth & Home Technologies brands like Heatilator, Heat-N-Glo, Majestic, and Quadra-Fire.
Functionally, this assembly houses the pilot burner orifice, the spark electrode, the flame sensor, and the mounting bracket in a single unified component. When your fireplace control board calls for ignition, the electrode generates a high-voltage spark to ignite the incoming natural gas stream at the pilot hood. Once lit, the integrated sensor verifies the pilot flame presence and signals the gas valve to release fuel to the main burner. Replacing a worn pilot assembly directly resolves common operational headaches such as continuous spark clicking without ignition, pilot flame blow-out, or main burners failing to engage due to weak microamp flame rectification signals.
Build quality matches standard aftermarket service components, utilizing a rigid stamped mounting bracket, a brass orifice holder, a formed copper pilot hood, and heat-rated electrical wire leads. The included pilot feed line is crafted from soft copper tubing, which allows minor positioning adjustments to align with the firebox burner floor. However, installers must take care during handling because copper tubing can kink, collapse, or fracture at the fittings if bent abruptly, which could cause a hazardous gas leak or restrict fuel flow.
Installation is straightforward for experienced DIYers or gas technicians familiar with Hearth & Home chassis layouts. The assembly mounts directly to the burner pan using the factory screw locations, while the electrical spade terminals connect directly into the module harness. Before ordering, verify that your fireplace is set up for Natural Gas (NG) and not Liquid Propane (LP). Propane uses different orifice sizes and gas pressures, and this unit is strictly sized for standard residential natural gas service. It is also completely incompatible with continuous standing pilot models or direct spark ignition (DSI) systems.
Buyers should double-check their fireplace unit serial numbers and exact model tags before purchasing. While it covers a wide variety of units like the Heat-N-Glo Mezzo series, Heatilator Crave models, and Quadra-Fire Sapphire stoves, some older model revisions (such as the Heatilator Aztec or Heat-N-Glo Bravo) only accept this part after specific serial break points. Always inspect the part number listed in your fireplace user manual to confirm that 2090-012, 2198-012, or SRV2090-012 is specified.
For owners facing an intermittent or dead pilot on an IPI natural gas fireplace, this Criditpid replacement assembly provides a reliable, budget-conscious repair path. It eliminates the need to replace entire burner plates or expensive gas control valves, restoring fast, consistent ignition to keep your hearth running smoothly through the heating season.
This pilot assembly replaces OEM part numbers 2090-012, 2198-012, and SRV2090-012 across Hearth & Home Technologies brands. It is designed for Natural Gas (NG) intermittent pilot ignition models only.
Compatible Heatilator models include ADVR3428I, ADVR3428IL, ADVT3428I, ADVT3428IL, Aztec (after serial # 002882484), CD4236-MOD, CD4842-MOD, Crave series (CRAVE4836, CRAVE6048, CRAVE7260, CRAVE8472 and see-through ST variants), EDV3633I, EDV3633IL, EHS3633I, Eclipse-32, Eclipse-36, GBFL4136I, GBST4336I, and GDST3831I.
Compatible Heat-N-Glo models include Bravo (after serial # 002881385), LCOR-36TRB-IPI, PIER-36TR-IPI, PIER-36TRB-IPI, RCOR-36TRB-IPI, RED40ST, ST-36TR-IPI, ST-36TRB-IPI, ST-36TVB-IPI, ST-550T-IPI, ST-550TM-IPI, 6000 series (6000CF-OAK-IPI, 6000CMOD-IPI, 6000GBV-IPI, 6000GCF-IPI, 6000G-IPI), Escape-42DV, LUX60, Mezzo series (36, 48, 60, 72 and ST see-through versions), Paloma, and Paloma-MOD.
Compatible Quadra-Fire models include QV36A-FB Expression units manufactured after February 2006, Garnet-IPI, Garnet-IPI-B, Sapphire-IPI, and Topaz-IPI. Also fits Majestic model OXDV30-IPI and Outdoor Lifestyles models ODPALG-48 and Twilight-II series (II, II-B, II-C, II-MOD).
Always shut off the main gas supply line and disconnect electrical power to the fireplace before attempting to service the pilot assembly or open the firebox glass.
Handle the soft copper pilot tubing with care. Avoid sharp 90-degree bends or crushing the line with pliers, as kinking the tube will obstruct the fuel orifice and over-bending can lead to metal fatigue or gas leakage.
After securing the pilot mounting bracket and threading the gas compression fitting, verify all gas joints using an approved non-corrosive gas leak detection fluid or electronic sniffer prior to lighting the appliance.
If you are unfamiliar with gas line connections, microamp flame rectification testing, or IPI control modules, hire a certified hearth specialist or licensed gas fitter to perform the replacement.
Pros
- Complete kit includes thermostat sensor and speed rheostat without needing wall switch wiring
- Ball-bearing construction provides smooth, balanced motor rotation and long-term durability
- Standard 120-volt 3-prong plug connects directly to existing fireplace junction box outlets
- Automatic thermal activation prevents the fan from blowing cold air during initial fire startup
- Broad compatibility across popular Heatilator, Majestic, and Vermont Castings gas fireplace models
Cons
- Will not start spinning immediately upon lighting the fire until the thermodisc warms up to approximately 120 degrees Fahrenheit
- Requires careful measurement of the fireplace bottom cavity to ensure the 12.5 x 3.73 x 3.23 inch frame fits
- Not a universal blower and will not fit fireplaces outside of supported chassis dimensions and model series
The Hongso GFK4 fireplace blower fan kit is an aftermarket replacement and upgrade assembly designed to circulate warm air from compatible gas and wood-burning fireplaces into living rooms and family rooms. It suits homeowners who own compatible Heatilator, Majestic, Vermont Castings, Monessen, or CFM models and want to distribute warmth trapped inside the fireplace cavity without relying solely on passive radiant heat.
Air circulation performance is driven by a 2050 RPM motor rated to push up to 118 CFM of airflow through a 9.5-inch flange opening. The system includes an automatic magnetic thermodisc sensor that prevents cold air circulation by keeping the blower turned off until the fireplace heats up to approximately 120 degrees Fahrenheit. Once engaged, the included variable-speed rheostat allows users to dial in their preferred airflow and manage ambient operational sound.
Motor construction features ball bearings designed for balanced rotation, paired with an aluminum and galvanized steel housing built for durability inside hot hearth environments. The unit holds a Class H insulation rating capable of handling temperatures up to 392 degrees Fahrenheit. Electrically, the blower operates on a standard 120-volt, 60Hz supply at 0.6 amps, consuming an energy-efficient 31 watts during continuous operation.
Installation is straightforward for fireplaces with an existing 120-volt outlet inside the lower access cavity, requiring no separate wall switch. The kit supplies a 3-prong grounded power cord, connecting wires, Velcro mounting strips for vibration reduction, and the necessary control modules. Physical dimensions measure 12.5 inches in length, 3.73 inches in width, and 3.23 inches in height, fitting beneath the firebox when adequate clearance is available.
Buyers must verify their fireplace model numbers and measure the available clearance inside the lower compartment before ordering, as tight enclosures can make positioning difficult. Additionally, first-time users should remember that the fan will not turn on instantly upon lighting the fire; the thermodisc requires the firebox to reach roughly 120 degrees Fahrenheit before activating the motor.
For owners of compatible Heatilator series like NDV4236 or Majestic BC units, this complete fan kit offers an economical way to restore or add forced-air circulation to an existing hearth. Provided your fireplace has the necessary clearance, internal power outlet, and compatible chassis, it represents a practical and cost-effective heating accessory upgrade.
The blower motor operates at 2050 RPM and produces a rated airflow of 118 CFM, moving warm air through a 9.5-inch discharge flange. It is constructed with ball bearings for smooth, quiet rotation and longevity inside enclosed fireplace spaces.
Electrical ratings specify 120V AC, 60Hz, 0.6 amps, and a power draw of 31 watts. The motor is insulated to Class H standards, providing thermal resistance rated up to 392 degrees Fahrenheit to safely withstand heat inside the fireplace base.
This kit cross-references part numbers GFK4, FK4, GFK4A, GFK4B, em3030lh-85, NDV4236I, NDV4236i-b, R7-RB74K, HB-RB74K, SkyTech FK-165-ESC, and 98240.
Direct fit compatibility includes Majestic models such as BC36, BC36i, BC42, and BC42i, as well as dozens of Heatilator models including the NDV4236, NDV3933, NDV4842, GNDC33, GNDC36, GNRC33, GNRC36, SL-550TRS-IPI-E, and SL-750TRS series. Always check your original blower size and fireplace manual before purchase.
The kit includes an automatic magnetic thermodisc sensor designed to attach to the bottom or back of the firebox. The blower will remain off until the sensor detects a temperature of approximately 120 degrees Fahrenheit, preventing cold drafts.
A manual rheostat control allows full variable-speed adjustment of fan speed and airflow. Because the assembly plugs into a standard 120-volt fireplace outlet using the included 3-prong cord, a separate wall switch is not required.
Pros
- Automated magnetic thermal switch turns the fan on and off based on firebox heat
- Includes a dial rheostat for fine-tuning fan speed and sound levels
- Class H motor insulation is rated for high-heat environments up to 392 degrees Fahrenheit
- Foam isolation pads help prevent metal-on-metal vibration noise against the fireplace back wall
- Long 83-inch 3-prong power cord easily reaches existing factory junction outlets
Cons
- Requires an existing 120V factory electrical outlet inside or beneath the fireplace cavity
- Physical installation can be awkward in fireplaces with narrow lower service louver openings
- Compatibility is restricted to specific cross-referenced models rather than being a universal fit
The Adviace GFK4 Replacement Fireplace Blower Kit is an aftermarket forced-air circulation package designed specifically for select Heatilator, Majestic, Lennox, and Temco gas fireplaces. Many gas hearth units rely on natural convection alone, which often leaves significant heat trapped around the firebox casing rather than circulating into the room. This complete kit targets existing-fireplace owners looking to replace a worn factory fan or install a blower into a factory-prepared cavity to improve heat delivery throughout the living area.
Airflow performance centers on a single cross-flow blower assembly rated at 130 cubic feet per minute (CFM) running at up to 3000 RPM. A blower does not generate heat or alter burner BTU output; instead, it draws cooler room air across the heated outer shell of the firebox and discharges it back into the living space. Circulation control is automated by an included magnetic thermostat switch that closes to engage the fan at approximately 120 degrees Fahrenheit and opens to shut it off around 90 degrees Fahrenheit (+/- 5 degrees tolerance). A separate manual rheostat knob allows users to dial in continuous fan speeds from low to high.
Build quality is suited for the challenging thermal environment of a fireplace undercarriage. The fan motor is equipped with Class H insulation rated to withstand temperatures up to 392 degrees Fahrenheit, helping safeguard internal windings from high operating heat. To address common metallic rattling, the kit includes three adhesive foam pads (two for the rear and one for the bottom) that decouple the blower chassis from the thin sheet metal walls of the fireplace housing.
Physical installation requires matching the 12.5-inch length, 3.73-inch width, and 3.23-inch height dimensions to your fireplace base access area. The air discharge port measures 9.57 inches in length. Wiring is largely plug-and-play thanks to a pre-assembled harness and an 83-inch, standard 3-prong power cord designed to plug directly into the factory 120V receptacle located beneath the firebox. The magnetic thermostat attaches directly to the underside of the firebox floor without drilling, while the speed control knob mounts inside the lower access panel for easy reach.
A primary limitation is model-specific clearance and power availability. Homeowners must verify that a powered 120V outlet is already wired and functioning in the lower fireplace cavity, as this kit relies on a standard plug. Additionally, while the blower cross-references standard part numbers such as GFK4, GFK4A, FK4, HB-RB74K, and R7-RB74K, it is not a universal design. Tight working clearances inside lower louver access panels may also require patience and careful alignment during placement.
For owners of compatible Heatilator or Majestic gas fireplaces experiencing cold spots or facing a failed original blower, this Adviace assembly offers a practical, feature-complete solution. The inclusion of both automatic thermal cycling and manual speed regulation makes it a functional upgrade for maximizing room warmth from an existing hearth setup.
Compatibility verification is essential before purchase because fireplace chassis dimensions and bracket layouts vary widely. This blower kit is engineered to replace factory part numbers GFK4, GFK4A, FK4, Rotom HB-RB74K, and R7-RB74K.
Supported Heatilator models include 116DV3732NE, 116DV3732NV, 116DV3732PE, 116DV3732PV, 116DV4136N, 116DV4136NV, 116DV4136PE, 116DV4136PV, BV4236, BV4236DBI, BV4236DBILP, BV4842, BV4842DBI, BV4842DBILP, CB4236, CB4236ILR, CB4236ILR-C, CB4236IR, CB4236IR-C, CB4236MILR, CB4236MIR, CB4236MLR, GNBC33, NDV4236I, and ND3933, among other listed units.
Always measure your fireplace's lower mechanical cavity and consult the manufacturer owner manual to ensure your specific sub-model accommodates a 12.5-inch blower assembly before ordering.
The blower motor operates on standard residential electricity at 120 volts and 60 Hz, drawing approximately 31 watts under normal operation. The included 3-prong grounded power cord measures 83 inches in length to easily reach interior cavity receptacles.
Airflow reaches up to 130 CFM with a motor rotational speed of 3000 RPM. The cross-flow blower housing measures 12.5 inches long, 3.73 inches wide, and 3.23 inches high, with an air discharge opening spanning 9.57 inches.
Temperature management is handled by a magnetic snap switch rated to close at roughly 120 degrees Fahrenheit and open at roughly 90 degrees Fahrenheit. Motor windings feature Class H thermal insulation rated up to 392 degrees Fahrenheit.
Pros
- Genuine OEM construction ensures exact bracket fit and proper electrode alignment on supported models
- Direct replacement for part numbers SRV593-512 and 593-512A
- Engineered specifically for IPI systems to maintain proper flame-sensing and electronic ignition function
- Resolves intermittent ignition and pilot startup failures on compatible natural gas fireplaces
Cons
- Configured strictly for natural gas and not compatible with liquid propane without verified factory conversion kits
- Incompatible with standing pilot, direct spark ignition (DSI), or hot surface ignition (HSI) systems
- Fit is limited to a specific list of Heat & Glo models and requires checking fireplace serial numbers
The HHT Heat & Glo SRV593-512 is an authentic replacement natural gas pilot assembly engineered specifically for select Hearth & Home Technologies (HHT) gas fireplaces. Designed for owners dealing with ignition failure, weak pilot flames, or worn flame sensors, this component serves as a direct factory fix for intermittent pilot ignition (IPI) hearth systems. It is best suited for homeowners, property managers, and service technicians seeking to restore reliable starting performance in specific Heat & Glo gas appliances without replacing the complete burner mechanism.
Operational performance centers around the intermittent pilot ignition cycle, which lights the pilot flame electronically on demand rather than burning gas continuously. This assembly provides the proper ignition spark and flame-rectification sensing required by compatible IPI control modules to safely open the main gas valve. Because this unit is configured exclusively for natural gas delivery, it maintains the appropriate orifice sizing and pilot shield geometry needed to sustain a stable flame over the sensor probe under standard residential gas line pressures.
Build quality reflects OEM standards, ensuring that mounting brackets, spark electrodes, flame rectification rods, and pilot gas tubing integrate properly with factory hearth chassis. As an updated replacement for both part number SRV593-512 and 593-512A, the assembly eliminates the fitment risks and erratic flame-sensing behaviors often associated with generic aftermarket components. The pre-aligned electrode spacing and secure bracket design help preserve consistent ignition spark placement near the pilot gas stream.
Setup and servicing involve precise gas and electrical connections that demand careful handling. Replacing a fireplace pilot assembly requires disconnecting the gas supply line, pilot tubing, and ignition wiring from the pilot valve and control module. Because working with natural gas components and electronic ignition systems carries inherent risks, installation should follow the manufacturer instructions in the fireplace service manual, and consulting a qualified gas technician is strongly advised to verify gas-tight connections and proper ignition sequencing.
Compatibility limitations represent the primary purchasing constraint with this component. This pilot assembly is strictly engineered for natural gas appliances and will not function safely on liquid propane without manufacturer-approved conversion hardware. Furthermore, it is engineered solely for IPI systems and cannot replace components in standing pilot, direct spark ignition (DSI), or hot surface ignition (HSI) fireplaces. Exact fireplace model verification is essential, as fit is restricted to models like the CFX-Diamond, Dakota 42 series, Grand-50-D, and Everest units produced after serial number 5000.
For property owners managing a compatible Heat & Glo natural gas fireplace with ignition trouble, this OEM assembly is a practical and direct replacement option. It provides factory-level fit and reliable flame detection, provided the user verifies model numbers, serial cutoffs, and system ignition types against their fireplace rating plate prior to ordering.
Compatibility for the HHT SRV593-512 pilot assembly is restricted to specific Hearth & Home Technologies and Heat & Glo models utilizing an Intermittent Pilot Ignition (IPI) system. It directly replaces factory part numbers SRV593-512 and 593-512A.
Confirmed compatible models include Heat & Glo CFX-DIAMOND, DAKOTA42, DAKOTA42H, DAKOTA42-B, DAKOTA42H-B, and GRAND-50-D. For the Heat & Glo EVEREST model, this part is compatible only with units manufactured after serial number 5000.
This part will not function with standing pilot fireplaces that use a continuous pilot light, nor will it work with direct spark ignition (DSI) or hot surface ignition (HSI) control systems. Always cross-reference the fireplace rating plate and parts manual before ordering.
This pilot assembly is configured specifically for natural gas (NG) systems. Fuel types are not interchangeable, and installing a natural gas pilot assembly into a liquid propane (LP) appliance without verified manufacturer conversion components can cause severe ignition malfunctions.
Because pilot assembly replacement involves natural gas lines, electrical leads, and safety shutoff controls, proper installation requires adherence to manufacturer guidelines and local building codes. Homeowners should shut off the main gas supply and electrical power before servicing, and hiring a qualified gas professional is recommended to check for gas leaks and test ignition cycling.
Pros
- Direct drop-in replacement matching OEM specifications for Heatilator Constitution C40 and standard Heat & Glo Northstar models
- Rated up to 2100°F using safer ceramic fiber alternative materials rather than traditional hazardous fibers
- Complete two-piece kit includes both the rigidized board and the pre-cut trapezoidal blanket
- Made in the USA with rigidized gray board coating for enhanced durability inside the firebox
Cons
- Not compatible with Heat & Glo Northstar-C fireplaces
- Model-specific dimensions prevent use in universal or non-compatible wood stoves
- Requires careful handling during installation to prevent chipping edges or tearing insulation
The Lynn Manufacturing 2394C Baffle Fiberboard and Blanket Kit is a direct replacement firebox component engineered specifically for owners of Heat & Glo Northstar and Heatilator Constitution C40 wood-burning fireplaces. Over seasons of high-heat burning, factory internal baffles and blankets degrade, crack, or thin out, allowing excess heat to escape up the flue rather than circulating back into the secondary combustion zone. This aftermarket kit bundles both necessary components, replacing factory part numbers SRV480-0510 and SRV480-0760 to help restore designed firebox heat retention and clean-burning draft performance.
Thermal endurance is central to internal fireplace baffles, and both items in this kit are rated to withstand temperatures up to 2100°F. Rather than traditional refractory ceramic fiber, Lynn Manufacturing utilizes high-temperature ceramic fiber alternative insulation comparable to Superwool Plus, SuperMag, and Insulfrax. This formulation provides identical thermal stability directly over intense wood flames while avoiding the carcinogenic hazard classifications associated with legacy ceramic fibers, making handling during routine maintenance substantially safer for homeowners.
Construction quality is tailored for the high-friction environment above secondary air tubes. The fiberboard measures 20-3/4 inches long by 11-1/2 inches wide with a 1/2-inch thickness, finished in a rigidized gray coating that reinforces structural rigidity against sagging and direct flame impingement. The accompanying soft blanket measures 27-1/2 inches long by 12-3/8 inches wide with a 1-inch thickness in a pre-shaped trapezoidal cut, designed to drape smoothly across the top of the rigid board to seal thermal bypass gaps.
Installation is straightforward for anyone familiar with basic wood fireplace maintenance, though careful handling is essential. After letting the firebox completely cool and clearing out remaining ashes and compromised baffle fragments, the new rigid board rests directly on the support brackets and secondary air tubes, with the blanket positioned evenly across the top. Because high-temperature fiberboard can chip if forced against firebox corners, patience and gentle alignment ensure a secure, flush fit without structural damage.
A critical limitation of the 2394C kit is its strict fireplace model compatibility. While it fits the standard Heat & Glo Northstar and the Heatilator Constitution C40, it does not fit the Heat & Glo Northstar-C revision. Fireplace owners should verify the exact model designation on their unit data plate or inside the original user manual prior to purchasing, as firebox dimensions and tube layouts vary across product revisions.
For homeowners maintaining a compatible Heatilator Constitution C40 or original Heat & Glo Northstar fireplace, this Lynn Manufacturing kit offers a practical, made-in-the-USA maintenance solution. Bundling both the rigid board and tailored blanket eliminates the hassle of tracking down separate parts, providing a reliable way to maintain fireplace safety and combustion efficiency ahead of cold weather.
This kit directly replaces Heat & Glo and Heatilator factory part numbers SRV480-0510 (fiber baffle board) and SRV480-0760 (ceramic insulation blanket).
Verified compatible fireplace models include the Heat & Glo Northstar and the Heatilator Constitution C40 wood-burning fireplaces.
This kit is explicitly not compatible with the Heat & Glo Northstar-C. Always inspect your fireplace rating plate to confirm model designations before ordering replacement internal components.
The rigid fiberboard measures 20-3/4 inches in length, 11-1/2 inches in width, and 1/2 inch in thickness, matching OEM firebox placement over air tubes.
The pre-cut trapezoidal insulation blanket measures 27-1/2 inches in length, 12-3/8 inches in width, and 1 inch in thickness for complete coverage over the board.
Total packaged shipping weight is approximately 4 pounds, packaged within a 22.7 x 12.8 x 2.6 inch container to protect the rigidized board edges during transit.
Pros
- Direct replacement compatibility with Robertshaw 446-511 and part numbers 34820 and 72956
- 27-inch overall length provides ample slack for routing in most direct-vent fireplace lower cavities
- Constructed with standard copper lead for effective heat transfer and signal conductivity
- Fine-thread terminal nut fits Robertshaw and specific SIT 820 NOVA valve connections
Cons
- Only fits fine-thread valve ports and will not work on gas valves requiring coarse threads
- Does not replace thermopiles or pilot generator assemblies that produce higher millivolt outputs for wall switches
- Requires careful physical comparison with the existing thermocouple before ordering to verify thread size and lead length
The Fixitshop 27-Inch Direct Vent Fireplace Thermocouple is a targeted replacement part designed for gas hearth appliances experiencing pilot retention trouble. If a direct-vent gas fireplace pilot lights manually but immediately goes out the moment the control knob is released, a worn or faulty thermocouple is often the underlying cause. This component serves homeowners, rental property managers, and DIY repairers looking for a direct-fit fix for worn safety sensors on compatible Heatilator, Heat & Glo, and similar gas fireplace systems.
Functionally, this thermocouple acts as an analog safety sensor within the pilot assembly. When engulfed in the standing pilot flame, the copper probe tip generates a small millivolt charge that signals the internal magnet of the gas control valve to remain open. Product specifications confirm that this unit directly replaces Robertshaw part 446-511, along with cross-reference part numbers 34820 and 72956. It is specifically designed to mate with Robertshaw valves as well as select SIT 820 NOVA gas valves that use fine thread connectors.
In terms of materials and construction, the unit features a copper line and sensor head measuring 27 inches in length, weighing just under 0.1 pounds. The copper tubing provides both thermal conductivity and enough flexibility to be gently guided through burner base grommets or tight valve access openings without crimping. The terminal end is fitted with a fine-thread nut designed to thread securely into the back of the compatible control valve head.
Installation involves routing the sensor end into the pilot burner bracket next to the pilot hood and tightening the threaded connection at the valve port. Because the copper line is 27 inches long, it provides enough reach for most standard direct-vent fireplace configurations where the valve sits beneath the firebox floor. Installers must take care not to over-tighten the fine brass threads at the valve or bend the copper line at sharp 90-degree angles, as crushing the internal lead can interrupt the electrical signal.
The primary limitation of this part is connection specificity. Gas fireplaces utilize both fine-thread and coarse-thread fittings, and this unit is strictly built for fine-thread Robertshaw and select SIT 820 NOVA connections. Furthermore, a thermocouple should not be confused with a two-lead thermopile (pilot generator); this single-lead thermocouple solely monitors the pilot to keep the valve open, rather than powering remote wall switches or blowers. Buyers should inspect their current pilot assembly and valve specifications prior to purchasing.
For owners of compatible Heatilator, Heat & Glo, or Robertshaw-equipped direct-vent fireplaces facing pilot outage issues, this Fixitshop replacement offers a practical, low-cost repair part. When verified against your appliance manual for thread type and lead length, it delivers the exact physical and electrical interface required to restore dependable fireplace ignition.
Compatibility for this thermocouple depends entirely on thread type and valve model. This part is identified as a replacement for Robertshaw part number 446-511, as well as interchangeable part numbers 34820 and 72956 commonly found in Heatilator and Heat & Glo direct-vent gas fireplaces.
The terminal end features a fine-thread connection designed to seat into Robertshaw control valves and select SIT 820 NOVA series gas valves. It will not fit valves engineered for coarse-threaded thermocouple nuts or quick-drop coaxial fittings. Always verify the part number in your fireplace owner manual or check the thread pitch on your existing failed sensor before ordering.
When servicing any gas fireplace component, the gas supply to the appliance must be shut off completely before beginning work. Ensure the fireplace and all pilot components are completely cool to the touch.
Take care when routing the 27-inch copper tubing from the pilot bracket to the valve compartment. Avoid sharp kinks, tight bends, or pinching the copper line against sharp sheet metal edges. Thread the connector nut into the valve port by hand first to avoid cross-threading, then snug it gently with a small wrench without over-torquing the fine threads. If you are uncomfortable working around gas lines or burner assemblies, consult a qualified gas service professional.
Pros
- Complete all-in-one kit includes the blower, pre-wired harness, magnetic thermostat, and variable speed switch.
- Heavy-duty Class H motor insulation is rated to withstand firebox ambient temperatures up to 392°F.
- Foam mounting pads isolate motor vibration against the steel chassis to help prevent casing resonance.
- Provides effective supplemental air movement with 130 CFM while consuming only 31 watts of electricity.
Cons
- Requires an accessible 120V electrical outlet inside or near the fireplace lower service compartment.
- Compatibility is restricted to specific fireplace models, requiring buyers to verify cavity dimensions and model numbers prior to ordering.
- Operating at maximum 3000 RPM airflow will generate noticeable sound from air movement.
The Hiorucet GFK4B Blower Fan Kit is a targeted aftermarket replacement component designed to restore or enhance air circulation in specific factory-built gas fireplaces. Rather than letting usable convective heat escape up the chase or linger inside the outer firebox cavity, this tangential fan assembly directs heated air outward into the living space. It is specifically suited for homeowners, property managers, and remodelers maintaining compatible Heatilator, Majestic, Lennox, and Temco gas fireplace installations.
Airflow performance is driven by a 120V motor operating at up to 3000 RPM, delivering an airflow rating of 130 CFM while drawing a modest 31 watts. The system operates on a dual-control architecture combining automated temperature regulation with manual speed fine-tuning. The included magnetic thermostat switch mounts directly to the firebox floor or wall, turning the fan on as the fireplace warms up to roughly 120°F and powering down once the unit cools below 90°F. For custom comfort, an in-line rheostat dial allows users to regulate motor speed between whisper-quiet low circulation and full 130 CFM output.
Build quality focuses on thermal resilience and noise reduction. Fireplace blower compartments experience severe heat soaking, and this unit features Class H insulation rated to withstand operating temperatures up to 392°F. The kit includes three double-stick foam dampening pads positioned along the rear and bottom of the housing. These pads prevent direct metal-to-metal contact with the fireplace enclosure, keeping the sheet metal chassis from acting as an acoustic amplifier for normal motor vibrations.
Installation is designed for straightforward placement in the bottom cavity underneath the fireplace burner pan. The kit comes pre-wired with a standard 3-prong grounded power cord, eliminating the need for complex wire splicing. The entire assembly measures 12.5 inches in length, 3.23 inches in width, and 3.73 inches in height, with an air discharge opening measuring 9.57 inches. The magnetic thermal sensor simplifies positioning by clinging securely to any clean ferrous surface on the firebox exterior.
Clear verification of your fireplace model and electrical setup is necessary before ordering. This blower requires an energized 120V wall outlet inside the fireplace control bay, which is common in millivolt or electronic ignition fireplaces but not present in all builder-grade setups. Additionally, while the kit matches standard GFK4 and FK4 part specifications, buyers must verify available clearance beneath the firebox floor to avoid interference with gas lines, valves, or pilot assemblies.
For owners of supported Heatilator, Majestic, Temco, or Lennox fireplaces dealing with a failed factory fan or looking to extract more warmth from their existing gas hearth, the Hiorucet GFK4B kit is a practical, value-oriented solution. Its inclusion of an automatic thermal switch, speed control knob, and vibration-isolating pads makes it an effective drop-in airflow upgrade.
Compatibility for the Hiorucet GFK4B kit depends on matching specific factory part numbers or designated gas fireplace models. This blower assembly directly cross-references common OEM part designations including GFK4, GFK4A, GFK4B, FK4, and Rotom replacement numbers HB-RB74K and R7-RB74K. It is engineered to drop into factory mounting locations that share these reference specifications.
Manufacturer-listed compatible models include Heatilator NDV4236I, Lennox EDR3530 and EDT3530, as well as Majestic BC36, BC36i, BC42, and BC42i fireplaces. It also fits an extensive lineup of Temco direct-vent models, including the 33RDV, 33RDVD, 33TDV, 33TDVD, 33TDVN, 33TDVP, 36CDVR, 36CDVX, 36RDV, 36RDVD, 36TDV, 36TDVD, 36TDVN, 36TDVP, 39RDV, 39RDVD, 39TDV, 39TDVD, 39TDVN, 39TDVP, and 41DV series, alongside select CFM, Monessen, and Vermont Castings units that use the GFK4 platform.
Always verify your existing blower dimensions and model label inside your fireplace access panel before purchase. Even when a fireplace brand matches, specific sub-models or revisions can alter the lower cavity spacing, gas manifold routing, or mounting tab locations.
The blower assembly utilizes a tangential cross-flow wheel engineered to produce an airflow volume of 130 CFM at an operating speed of 3000 RPM. Unlike standard axial fans that direct air in a narrow cone, the 9.57-inch discharge vent produces a wide, uniform air sheet across the convective heat channels of the firebox.
Speed management is handled via the included rotary rheostat dial. This control allows users to dial back the motor speed when low background noise is preferred during quiet living room use, or turn it up to full velocity when fast heat distribution is needed across a larger room.
Thermal durability is supported by Class H electrical insulation, rated for safe operation in ambient conditions up to 392°F. This high thermal rating is critical for longevity, as blowers situated directly beneath gas burners must tolerate ongoing radiant heat exposure during long heating cycles.
The Hiorucet GFK4B operates on standard 120V, 60 Hz alternating current with a rated power draw of 31 watts. The unit is pre-wired to a grounded 3-prong electrical plug, designed to plug straight into the factory electrical junction box located in the fireplace control compartment.
Mounting utilizes three supplied double-stick foam pads (two positioned on the back wall and one on the bottom of the blower housing). These adhesive pads secure the fan chassis to the fireplace walls while providing acoustic isolation to minimize vibration transfer to the exterior sheet metal.
The included magnetic thermostat simplifies wiring and placement. Because it adheres magnetically to the metal surface of the firebox, it can be positioned near the hottest zone of the lower firebox without requiring screw fasteners or drilling into the fireplace casing.
Frequently Asked Questions
How do I know which blower kit fits my Heatilator Birmingham or direct-vent unit?
Check your fireplace data plate inside the lower control cavity to match the exact model number and cross-reference part numbers like GFK4, GFK4A, or FK4. Most aftermarket blower kits measure 12.5 inches in length and include magnetic mounting thermostats designed to snap onto steel firebox bases. Verifying your unit has an existing internal 120-volt receptacle is essential before purchasing an electric fan kit.
Can I install an IPI pilot assembly on a standing pilot Heatilator fireplace?
No, an intermittent pilot ignition (IPI) pilot assembly will not operate on a standing pilot or direct spark ignition (DSI) system. Intermittent systems rely on specific electronic control modules and natural gas pilot valves designed strictly for intermittent sparking. Installing the wrong assembly risks gas valve damage and ignition failure, so you should always confirm your ignition type before ordering replacements.
Why does a replacement fireplace blower need a magnetic snap disc thermostat?
Magnetic snap disc thermostats prevent the blower from circulating cold room air by only activating once the firebox reaches approximately 120 degrees Fahrenheit. The switch automatically shuts the fan off when firebox temperatures drop below 90 degrees Fahrenheit. This automated thermal control protects the motor and ensures only warm, useful air is pushed into the living space.
What should I check if my natural gas pilot flame will not stay lit?
Inspect the thermocouple or flame sensor connection first to confirm it generates adequate millivoltage to hold the gas valve open. On direct-vent gas units, worn thermocouples like standard 27-inch replacements often fail to signal the safety valve after years of continuous pilot heat. Adding protective measures like sturdy protective fireplace screens also shields the hearth exterior while you perform routine diagnostic maintenance.
Do ceramic fiber baffle boards require replacement over time?
Yes, high-temperature fiber baffle boards and ceramic blankets degrade after repeated thermal cycling and require replacement when cracked or crumbling. These boards withstand temperatures up to 2100 degrees Fahrenheit to retain combustion heat and protect internal steel firebox components. Inspecting the baffle assembly annually ensures your wood or gas system operates efficiently without unnecessary heat loss.


Write Your Review
No reviews yet. Be the first to share your experience!