Maintaining a factory-built hearth requires matching replacement blowers, doors, and ignition components directly to your firebox model tag. Factory-built installations like heatilator accelerator herringbone fireplaces combine decorative interior masonry panels with specific clearance and airflow designs. Installing the wrong glass doors or forcing an incompatible blower into the lower cavity can disrupt circulation or pose safety risks. Reviewing manufacturer manuals, physical opening measurements, and electrical ratings helps ensure that any replacement part functions smoothly without modifying the factory firebox. If you appreciate classic styling, you might also compare these setups to decorative herringbone liners found in specialized hearth inserts.
Gas and wood systems demand precise replacement components to keep warmth moving into living spaces instead of escaping up the flue. Adding a dual-bearing blower kit can circulate heated room air across the metal exterior of your firebox, while a matched bi-fold glass door curbs drafts when the unit sits idle. For gas setups with intermittent pilot ignition, pairing the correct valve control module with an authentic natural gas pilot assembly keeps startup reliable and avoids costly ignition lockouts. Unlike standalone options like freestanding wood-burning fireplaces, zero-clearance units require hardware built specifically for factory enclosure clearances. Careful verification of sub-assemblies protects both your hearth investment and your daily comfort.
Pros
- Complete pre-wired kit includes motor, 3-prong cord, snap-disc thermostat, and variable-speed rheostat
- Ball-bearing motor delivers 130 CFM at 3000 RPM with low vibration design
- Magnetic mounting pads simplify positioning in lower fireplace access cavities without drilling
- Automatic thermal snap disc prevents blowing unheated room air during fireplace startup
Cons
- Requires an existing 120V outlet or powered junction box inside the fireplace lower cavity
- Fits specific Heatilator and compatible models; lower cavity dimensions and access clearances must be verified before purchase
- Operating at maximum 3000 RPM produces noticeable air movement sound depending on rheostat setting
The FireplaceBlowersOnline GFK4, GFK4A, and FK4 Blower Fan Kit is a specialized aftermarket heating accessory designed to enhance air circulation for Heatilator gas fireplaces and similarly configured units. Rather than letting heat escape up the flue or remain trapped behind decorative metal panels, this blower pushes warm air directly into your living room or family room. It serves as an ideal solution for homeowners replacing a worn, noisy factory blower or adding forced-air circulation to an existing gas fireplace to maximize supplemental heat distribution.
In terms of airflow performance, the blower assembly utilizes a ball-bearing motor rated at 3000 RPM to generate up to 130 CFM of forced air. This steady volume moves trapped heat out of the lower and rear heat-exchange channels and into the living space. Thermal automation is managed by an included snap-disc thermostat, which attaches magnetically to the base of the firebox. The thermostat prevents cold drafts by waiting until the fireplace reaches operating temperature before activating the fan, and it automatically powers off once the firebox cools down after shutdown.
Build quality centers on durability and vibration dampening. Ball-bearing motors offer improved wear resistance and longevity compared to traditional sleeve bearings, especially inside the high-temperature environment of a fireplace chassis. The kit incorporates noise reduction padding along the contact points and utilizes high-strength neodymium-style mounting magnets, which secure the blower firmly against the metal floor of the fireplace cavity to minimize vibration rattles during operation.
Installation is designed for straightforward DIY setup because the system comes fully assembled and pre-wired. The package includes a standard 3-prong grounded power cord that plugs directly into the pre-installed 120V electrical junction box commonly found in the bottom cavity of gas fireplaces. Users also receive a dial rheostat for manual speed adjustment, allowing you to fine-tune the airflow rate to find the right balance between maximum air delivery and quiet operation.
Potential buyers should keep a few practical considerations in mind before ordering. The blower assembly measures 12.5 inches wide by 3.23 inches deep by 3.73 inches high, meaning you must verify that the access opening beneath your fireplace louvers provides sufficient clearance for insertion. Additionally, your gas fireplace must already have an active, powered 120V electrical outlet beneath the firebox. While the ball-bearing motor is engineered for smooth operation, running any 130 CFM fan at its maximum 3000 RPM speed will naturally produce noticeable airflow noise in a quiet room.
For owners of compatible Heatilator fireplaces seeking better heat circulation, this pre-wired blower kit offers an accessible, feature-complete upgrade. With its magnetic mounting, built-in thermal snap disc, and variable speed control, it eliminates the need for custom wiring while significantly improving the comfort of your living space during cold winter months.
The blower kit is powered by a high-velocity ball-bearing motor delivering up to 3000 RPM and 130 CFM of forced airflow. This performance level is designed to draw cooler room air beneath the fireplace, cycle it across heated metal heat exchangers, and exhaust warm air outward into the room.
To manage sound and airflow, the kit includes an inline rheostat that enables smooth, variable speed adjustment. Running the motor at lower speeds provides continuous, quiet circulation, while dialing up the rheostat maximizes warm air delivery during cold spells. The included snap-disc thermostat ensures hands-free operation by sensing firebox heat, turning the blower on only after the fireplace warms up and shutting it off after cooling.
With physical dimensions of 12.5 inches wide, 3.23 inches deep, and 3.73 inches high, this blower kit is sized to fit through standard lower access louvers on Heatilator FK4, GFK4, and GFK4A gas fireplace models. Buyers should measure their lower firebox cavity and clearance paths to confirm adequate clearance before purchasing.
The unit features a pre-wired configuration with a standard 3-prong grounded power cord, eliminating the need for wire splicing. Heavy-duty neodymium-style mounting magnets hold the blower securely to the bottom sheet metal without drilling or sheet metal screws, while noise reduction padding isolates motor vibrations from the fireplace frame.
Pros
- Direct fit for multiple Hearth & Home Technologies brands using part numbers 2090-012 or SRV2090-012.
- Includes pilot burner hood, bracket, spark electrode, and flame sensor in one pre-assembled unit.
- Significantly less expensive than original manufacturer OEM replacement kits.
- Resolves common IPI failure symptoms like sparking without lighting or failing to sense a pilot flame.
Cons
- Strictly for Natural Gas (NG) configurations and cannot be used on Liquid Propane (LP) fireplaces.
- Requires careful installation as the thin copper gas tube can kink or crack if bent too sharply.
- Incompatible with older standing continuous pilot fireplaces or hot surface ignition (HSI) modules.
The Criditpid 2090-012 IPI Pilot Assembly is an aftermarket replacement part designed specifically for natural gas fireplaces built with electronic Intermittent Pilot Ignition systems. Rather than maintaining a continuous standing flame, IPI fireplaces electronically spark the pilot only when heat is demanded, lighting the main burner and extinguishing when switched off. This replacement kit serves homeowners, landlords, and hearth repair professionals dealing with failed ignition, pilot spark failures, or worn flame sensors across Hearth & Home Technologies brands like Heatilator, Heat-N-Glo, Majestic, and Quadra-Fire.
Functionally, this assembly houses the pilot burner orifice, the spark electrode, the flame sensor, and the mounting bracket in a single unified component. When your fireplace control board calls for ignition, the electrode generates a high-voltage spark to ignite the incoming natural gas stream at the pilot hood. Once lit, the integrated sensor verifies the pilot flame presence and signals the gas valve to release fuel to the main burner. Replacing a worn pilot assembly directly resolves common operational headaches such as continuous spark clicking without ignition, pilot flame blow-out, or main burners failing to engage due to weak microamp flame rectification signals.
Build quality matches standard aftermarket service components, utilizing a rigid stamped mounting bracket, a brass orifice holder, a formed copper pilot hood, and heat-rated electrical wire leads. The included pilot feed line is crafted from soft copper tubing, which allows minor positioning adjustments to align with the firebox burner floor. However, installers must take care during handling because copper tubing can kink, collapse, or fracture at the fittings if bent abruptly, which could cause a hazardous gas leak or restrict fuel flow.
Installation is straightforward for experienced DIYers or gas technicians familiar with Hearth & Home chassis layouts. The assembly mounts directly to the burner pan using the factory screw locations, while the electrical spade terminals connect directly into the module harness. Before ordering, verify that your fireplace is set up for Natural Gas (NG) and not Liquid Propane (LP). Propane uses different orifice sizes and gas pressures, and this unit is strictly sized for standard residential natural gas service. It is also completely incompatible with continuous standing pilot models or direct spark ignition (DSI) systems.
Buyers should double-check their fireplace unit serial numbers and exact model tags before purchasing. While it covers a wide variety of units like the Heat-N-Glo Mezzo series, Heatilator Crave models, and Quadra-Fire Sapphire stoves, some older model revisions (such as the Heatilator Aztec or Heat-N-Glo Bravo) only accept this part after specific serial break points. Always inspect the part number listed in your fireplace user manual to confirm that 2090-012, 2198-012, or SRV2090-012 is specified.
For owners facing an intermittent or dead pilot on an IPI natural gas fireplace, this Criditpid replacement assembly provides a reliable, budget-conscious repair path. It eliminates the need to replace entire burner plates or expensive gas control valves, restoring fast, consistent ignition to keep your hearth running smoothly through the heating season.
This pilot assembly replaces OEM part numbers 2090-012, 2198-012, and SRV2090-012 across Hearth & Home Technologies brands. It is designed for Natural Gas (NG) intermittent pilot ignition models only.
Compatible Heatilator models include ADVR3428I, ADVR3428IL, ADVT3428I, ADVT3428IL, Aztec (after serial # 002882484), CD4236-MOD, CD4842-MOD, Crave series (CRAVE4836, CRAVE6048, CRAVE7260, CRAVE8472 and see-through ST variants), EDV3633I, EDV3633IL, EHS3633I, Eclipse-32, Eclipse-36, GBFL4136I, GBST4336I, and GDST3831I.
Compatible Heat-N-Glo models include Bravo (after serial # 002881385), LCOR-36TRB-IPI, PIER-36TR-IPI, PIER-36TRB-IPI, RCOR-36TRB-IPI, RED40ST, ST-36TR-IPI, ST-36TRB-IPI, ST-36TVB-IPI, ST-550T-IPI, ST-550TM-IPI, 6000 series (6000CF-OAK-IPI, 6000CMOD-IPI, 6000GBV-IPI, 6000GCF-IPI, 6000G-IPI), Escape-42DV, LUX60, Mezzo series (36, 48, 60, 72 and ST see-through versions), Paloma, and Paloma-MOD.
Compatible Quadra-Fire models include QV36A-FB Expression units manufactured after February 2006, Garnet-IPI, Garnet-IPI-B, Sapphire-IPI, and Topaz-IPI. Also fits Majestic model OXDV30-IPI and Outdoor Lifestyles models ODPALG-48 and Twilight-II series (II, II-B, II-C, II-MOD).
Always shut off the main gas supply line and disconnect electrical power to the fireplace before attempting to service the pilot assembly or open the firebox glass.
Handle the soft copper pilot tubing with care. Avoid sharp 90-degree bends or crushing the line with pliers, as kinking the tube will obstruct the fuel orifice and over-bending can lead to metal fatigue or gas leakage.
After securing the pilot mounting bracket and threading the gas compression fitting, verify all gas joints using an approved non-corrosive gas leak detection fluid or electronic sniffer prior to lighting the appliance.
If you are unfamiliar with gas line connections, microamp flame rectification testing, or IPI control modules, hire a certified hearth specialist or licensed gas fitter to perform the replacement.
Pros
- Genuine OEM construction ensures exact bracket fit and proper electrode alignment on supported models
- Direct replacement for part numbers SRV593-512 and 593-512A
- Engineered specifically for IPI systems to maintain proper flame-sensing and electronic ignition function
- Resolves intermittent ignition and pilot startup failures on compatible natural gas fireplaces
Cons
- Configured strictly for natural gas and not compatible with liquid propane without verified factory conversion kits
- Incompatible with standing pilot, direct spark ignition (DSI), or hot surface ignition (HSI) systems
- Fit is limited to a specific list of Heat & Glo models and requires checking fireplace serial numbers
The HHT Heat & Glo SRV593-512 is an authentic replacement natural gas pilot assembly engineered specifically for select Hearth & Home Technologies (HHT) gas fireplaces. Designed for owners dealing with ignition failure, weak pilot flames, or worn flame sensors, this component serves as a direct factory fix for intermittent pilot ignition (IPI) hearth systems. It is best suited for homeowners, property managers, and service technicians seeking to restore reliable starting performance in specific Heat & Glo gas appliances without replacing the complete burner mechanism.
Operational performance centers around the intermittent pilot ignition cycle, which lights the pilot flame electronically on demand rather than burning gas continuously. This assembly provides the proper ignition spark and flame-rectification sensing required by compatible IPI control modules to safely open the main gas valve. Because this unit is configured exclusively for natural gas delivery, it maintains the appropriate orifice sizing and pilot shield geometry needed to sustain a stable flame over the sensor probe under standard residential gas line pressures.
Build quality reflects OEM standards, ensuring that mounting brackets, spark electrodes, flame rectification rods, and pilot gas tubing integrate properly with factory hearth chassis. As an updated replacement for both part number SRV593-512 and 593-512A, the assembly eliminates the fitment risks and erratic flame-sensing behaviors often associated with generic aftermarket components. The pre-aligned electrode spacing and secure bracket design help preserve consistent ignition spark placement near the pilot gas stream.
Setup and servicing involve precise gas and electrical connections that demand careful handling. Replacing a fireplace pilot assembly requires disconnecting the gas supply line, pilot tubing, and ignition wiring from the pilot valve and control module. Because working with natural gas components and electronic ignition systems carries inherent risks, installation should follow the manufacturer instructions in the fireplace service manual, and consulting a qualified gas technician is strongly advised to verify gas-tight connections and proper ignition sequencing.
Compatibility limitations represent the primary purchasing constraint with this component. This pilot assembly is strictly engineered for natural gas appliances and will not function safely on liquid propane without manufacturer-approved conversion hardware. Furthermore, it is engineered solely for IPI systems and cannot replace components in standing pilot, direct spark ignition (DSI), or hot surface ignition (HSI) fireplaces. Exact fireplace model verification is essential, as fit is restricted to models like the CFX-Diamond, Dakota 42 series, Grand-50-D, and Everest units produced after serial number 5000.
For property owners managing a compatible Heat & Glo natural gas fireplace with ignition trouble, this OEM assembly is a practical and direct replacement option. It provides factory-level fit and reliable flame detection, provided the user verifies model numbers, serial cutoffs, and system ignition types against their fireplace rating plate prior to ordering.
Compatibility for the HHT SRV593-512 pilot assembly is restricted to specific Hearth & Home Technologies and Heat & Glo models utilizing an Intermittent Pilot Ignition (IPI) system. It directly replaces factory part numbers SRV593-512 and 593-512A.
Confirmed compatible models include Heat & Glo CFX-DIAMOND, DAKOTA42, DAKOTA42H, DAKOTA42-B, DAKOTA42H-B, and GRAND-50-D. For the Heat & Glo EVEREST model, this part is compatible only with units manufactured after serial number 5000.
This part will not function with standing pilot fireplaces that use a continuous pilot light, nor will it work with direct spark ignition (DSI) or hot surface ignition (HSI) control systems. Always cross-reference the fireplace rating plate and parts manual before ordering.
This pilot assembly is configured specifically for natural gas (NG) systems. Fuel types are not interchangeable, and installing a natural gas pilot assembly into a liquid propane (LP) appliance without verified manufacturer conversion components can cause severe ignition malfunctions.
Because pilot assembly replacement involves natural gas lines, electrical leads, and safety shutoff controls, proper installation requires adherence to manufacturer guidelines and local building codes. Homeowners should shut off the main gas supply and electrical power before servicing, and hiring a qualified gas professional is recommended to check for gas leaks and test ignition cycling.
Pros
- Direct functional equivalent for the OEM SRV593-592 / GM-6KA ignition board
- Extensive compatibility across numerous Heat & Glo, Heatilator, and Quadra-Fire gas fireplaces
- Addresses frequent no-spark, intermittent lighting, and pilot ignition failures directly
- Significantly more affordable than full valve-and-control retrofit assemblies
Cons
- Requires careful cross-referencing against exact appliance model numbers and revisions prior to purchase
- Generic aftermarket component rather than an original manufacturer-branded part
- Installation involves accessing gas appliance wiring, which may require professional technician assistance
The SRV593-592 Electronic IPI Control Module is a specialized gas fireplace replacement component manufactured to restore reliable spark ignition in select Hearth & Home Technologies (HHT) products. Designed specifically as a functional equivalent to the factory GM-6KA and SRV593-592 modules, this part targets existing gas fireplace owners, property managers, and repair technicians. If your gas fireplace fails to generate an ignition spark, clicks without lighting, or experiences intermittent pilot dropouts, replacing an aged or malfunctioning control module is frequently the required fix.
In terms of real-world functionality, this module manages the Intermittent Pilot Ignition (IPI) sequence. Unlike older standing pilot systems that burn gas continuously, an IPI system electronically generates a spark to ignite the pilot only when warmth is requested. This module controls the timing, electrode spark, and low-voltage signal sent to the pilot gas valve. Supported models include widely installed units such as the Heat & Glo 6000 series (including 6000BEC-IPI, 6000TRI-IPI, 6000TRXI-IPI), the 8000 series, Cerona-36, Cerona-42, Escape series, and various CFL and GO gas log burner assemblies.
Regarding construction, the unit features a durable protective silver-toned housing that encloses the internal electronic printed circuit board. It incorporates designated multi-pin wire harness terminals arranged to align with original factory wiring layouts. While it is an aftermarket generic replacement rather than an original OEM part from Hearth & Home Technologies, the module is engineered to provide identical electronic switching and spark frequency parameters necessary for proper firebox ignition.
Installation requires working within the lower mechanical cavity of your gas fireplace or stove. The replacement process generally involves disconnecting electrical power to the fireplace, shutting off the gas supply line, and carefully transferring wiring harness plugs from the old module to the new terminals one by one. Homeowners tackling this repair should take photographs of the original wire configuration beforehand to ensure exact pin alignment. Those uncomfortable handling low-voltage electrical connections or working near gas lines should hire a certified gas fireplace technician.
A realistic limitation of this module is its strict model specificity. It is engineered strictly for intermittent pilot electronic ignition systems and will not function in standing pilot millivolt fireplaces, continuous pilot systems, or fireplaces using newer IntelliFire Touch (IFT) controls. Buyers must also note that pilot failure can sometimes stem from worn flame sensors, severed wiring, or pilot burner clogs rather than the module itself, making proper electrical troubleshooting essential before ordering.
Overall, the SRV593-592 ignition module offers dependable value for anyone troubleshooting a non-responsive Heat & Glo, Heatilator, or Quadra-Fire IPI fireplace. By addressing the electronic heart of the pilot lighting system at a fraction of the cost of a full valve overhaul, it provides a practical path toward restoring reliable warmth and ambiance to your living space.
Compatibility is the most critical consideration when purchasing a gas fireplace electronic ignition module. This SRV593-592 / GM-6KA module is engineered strictly for select Hearth & Home Technologies brands featuring Intermittent Pilot Ignition (IPI) assemblies, primarily Heat & Glo, Heatilator, and Quadra-Fire units.
Specifically verified Heat & Glo models include the 6000 series (6000BEC-IPI, 6000BE-IPI, 6000CF-OAK-IPI, 6000GBV-IPI, 6000GCF-IPI, 6000G-IPI, 6000GL-IPI-R, 6000GL-IPI-S, 6000GLX-IPI-R, 6000GLX-IPI-S, 6000PLUS, 6000TRI-IPI, 6000TR-OAK-IPI, 6000TRXI-IPI, 6000TV-OAK-IPI), 6100PLUS and 6100PLUS-LP, as well as the 8000 series (8000CF-OAK-IPI, 8000TRD-IPI, 8000TR-OAK-IPI, 8000TVD-IPI, 8000TV-OAK-IPI).
Additional compatible models include the BCBV36I, BE-36-CIPI, BE-41B-IPI, BE-41IPIC, CERONA-36, CERONA-42, DV3732, DV3732SBi, ESC-42ST, ESCAPE-36DV, ESCAPE-42DV, GEM-36, GEM-36B, GEM-42, GEM-42B, and CFL / GO series gas log burners (CFL-24NG-IPI, CFL-24LP-IPI, GO24, GO30, GO318, GO324, GO330 in natural gas or liquid propane versions). Always verify the metal rating plate inside your fireplace control compartment prior to ordering.
Working on any gas-fired hearth appliance requires strict adherence to manufacturer safety protocols. Before attempting to inspect or replace this ignition control module, ensure that both the AC electrical power source and the backup battery pack (if equipped) are completely disconnected. In addition, turn the manual gas shutoff valve to the closed position.
Take note of all terminal labels and wire colors prior to removing the defective module. Transferring each lead individually prevents cross-wiring that could damage the circuit board or prevent ignition. Ensure all spade and multi-pin connectors fit snugly onto the module terminals without loose contact.
If you lack experience with low-voltage wiring, multimeter diagnostics, or gas appliance components, schedule service with a qualified gas technician or certified hearth specialist. After completing installation, always conduct a standard gas leak check around any disturbed fittings and follow the manufacturer lighting instructions to verify proper pilot sparking and main burner ignition.
Pros
- Exact model-specific inside fit for 14 designated 36-inch Heatilator prefabricated models
- Smooth-gliding bi-fold doors fold back a full 90 degrees during fire operation
- Rigid 1 1/8-inch anodized-aluminum frame with clear 3/16-inch tempered glass
- Easy home installation requiring only basic tools such as a drill and screwdriver
- Includes a 2-year manufacturer warranty covering materials, workmanship, and glass
Cons
- Fits only listed 36-inch Heatilator zero-clearance units and will not fit masonry or other fireplace brands
- Glass doors must remain fully open whenever a fire is actively burning
- Requires drilling into the fireplace opening perimeter for inside mounting
The EZ-FIT Prefab Fireplace Door is an inside-fit glass enclosure engineered specifically for homeowners with select 36-inch prefabricated Heatilator zero-clearance fireplaces. Rather than attempting to adapt a generic screen to a factory-built firebox, this assembly provides a custom-tailored replacement solution. It suits existing-fireplace owners who need to replace damaged, missing, or worn doors while preserving the precise fit required by factory-built fireboxes.
Model compatibility is the most critical aspect of this door assembly. It is strictly manufactured to fit Heatilator model numbers DX36, DX36AI, E36, EC36, HB36A, HB36AI, HD36B, HD36BI, HR36, HC36, ST36D, T588, T3600, and TD36B. Designed to align with a fireplace opening measuring 36 inches wide by 20 15/16 inches high, the unit mounts directly inside the firebox. Homeowners must verify the metal identification tag located inside their firebox before ordering, as this door will not mount securely or safely to unlisted models or masonry hearths.
Build quality focuses on dependable resilience and a clean, modern aesthetic. The outer frame is crafted from 1 1/8-inch matte black anodized aluminum, offering structural rigidity and heat resistance without adding excessive weight to the firebox opening. The tracked bi-fold panels utilize 3/16-inch clear tempered safety glass with finished edges to guard against chipping. The bi-fold mechanism glides smoothly along top and bottom channels, swinging open a full 90 degrees to ensure wide-open firebox operation.
Installation is designed for straightforward DIY setup using standard household tools, requiring only a screwdriver and a power drill. The physical frame dimensions may measure up to 1/4 inch smaller than the listed 36 by 20 15/16-inch opening to provide necessary installation clearance. The evenly spaced gaps on either side of the doors are intentionally engineered to accommodate normal thermal expansion and draft behavior rather than representing manufacturing flaws.
Operational awareness is essential for maintaining safety and equipment longevity. Fireplace doors on prefabricated zero-clearance systems must remain fully opened whenever an active fire is burning. Closing the tempered glass doors during a live fire can trap excessive heat inside the firebox, risking glass breakage and frame deformation. Additionally, this is an inside-fit door kit and does not replace the need for an existing spark screen if one is required for open burning.
For owners of a confirmed 36-inch Heatilator prefab fireplace, the EZ-FIT enclosure offers a reliable, model-specific upgrade at a practical price point. Made in the USA and backed by a 2-year manufacturer warranty covering materials, workmanship, and glass, it provides an exact-fit aesthetic refresh for aging factory-built hearths.
Compatibility for this door assembly is strictly model-specific. It is engineered exclusively for 36-inch prefabricated Heatilator fireplaces carrying the following model numbers: DX36, DX36AI, E36, EC36, HB36A, HB36AI, HD36B, HD36BI, HR36, HC36, ST36D, T588, T3600, and TD36B.
Before purchasing, buyers must check the metal rating tag riveted to the inside wall or upper interior baffle of the firebox to confirm model designation. This unit will not fit non-listed Heatilator sizes, other prefabricated fireplace brands, or traditional site-built masonry fireplaces.
This door is built as an inside-fit enclosure designed for a nominal opening of 36 inches wide by 20 15/16 inches high. The actual finished frame dimensions may measure up to 1/4 inch smaller than the listed dimensions to permit proper positioning and installation adjustments within the firebox opening.
Evenly spaced perimeter gaps between the doors and frame edges are engineered intentionally. These clearances reduce heat stress, prevent binding, and accommodate the natural expansion of materials during regular fireplace operation.
Safety guidelines require that the bi-fold glass doors remain fully opened to a complete 90-degree position whenever a fire is actively burning. Closing the glass doors while burning wood traps intense heat, which can damage the zero-clearance firebox and cause tempered glass to shatter.
The door panels are constructed with 3/16-inch clear tempered safety glass with safe finished edges. The entire unit is backed by a 2-year manufacturer warranty covering defects in materials, workmanship, and glass.
Pros
- Direct plug-compatible replacement for common OEM numbers 2166-347 and 2166-307
- Restores intermittent pilot ignition sequence on compatible gas fireplaces
- One-year warranty provides added post-purchase protection
- Broad compatibility across major Hearth and Home Technologies brands with H3V valves
Cons
- Strictly limited to 6V IPI systems and will not work with standing pilot, DSI, or HSI units
- Requires verifying exact part numbers, valve types, and wiring terminals prior to purchase
- Gas fireplace electrical work may require professional installation depending on local codes
The JDZHYR 6V Electronic Ignition IPI Fireplace Control Module is a targeted replacement component designed for gas fireplace owners dealing with ignition failures. Rather than replacing an entire hearth system or complete gas train, this module addresses ignition breakdown at the control level. It is built specifically for select residential gas fireplaces manufactured under the Heatilator, Heat N Glo, and Quadra-Fire brands that rely on intermittent pilot ignition (IPI) assemblies.
Functionally, this module manages the 6-volt intermittent pilot sequence, sending the necessary electrical signals to spark the pilot and open the pilot valve when heat is called for. By replacing worn or malfunctioning original modules, it restores dependable ignition cycling and safe burner start-up. It acts as a direct substitute for original equipment manufacturer part numbers 2166-347 and 2166-307, specifically interfacing with H3V gas valve systems using GM8K-1 or GM8K1-OC control units.
The module features a standard compact black housing designed to seat inside the lower access panel or control compartment beneath the fireplace firebox. The terminal configuration aligns with OEM harness connections, allowing existing wiring plugs to connect directly to the replacement board without requiring wire splicing or custom adapters.
Installation involves accessing the fireplace control bay, disconnecting the existing module, and transferring wire harnesses directly to the corresponding terminals on the new board. Before performing any work, homeowners must shut off both electrical power and the gas supply to the appliance. While the physical swap is straightforward for experienced DIYers, gas fireplace servicing carries inherent safety risks, and local codes often recommend having a qualified gas professional handle internal electrical and valve components.
A critical limitation of this module is its strict system compatibility. It is engineered exclusively for 6-volt intermittent pilot ignition systems and is completely incompatible with direct spark ignition (DSI), hot surface ignition (HSI), or traditional standing pilot setups. Buyers must inspect their current control board and verify part numbers on their existing valve system before purchasing to avoid compatibility errors.
For owners of compatible Heatilator, Heat N Glo, or Quadra-Fire gas fireplaces needing to resolve ignition faults, the JDZHYR module offers an economical and direct fix. Backed by a one-year warranty, it serves as a practical repair solution to get a cold gas fireplace sparking reliably again.
This control module serves as a direct replacement for part numbers 2166-347 and 2166-307. It is engineered for gas fireplaces utilizing H3V valve platforms equipped with GM8K-1 or GM8K1-OC modules.
Supported fireplace brands include Heatilator, Heat N Glo, and Quadra-Fire models using compatible IPI systems. It does not fit or function on units utilizing standing pilot assemblies, direct spark ignition (DSI), or hot surface ignition (HSI) systems. Always check your existing fireplace manual or inspect the label on your existing control board prior to ordering.
The JDZHYR 6V Electronic Ignition IPI Fireplace Control Module includes a one-year manufacturer warranty covering defects in materials and workmanship under standard operating conditions.
To ensure proper performance and maintain warranty coverage, the module must be installed in accordance with manufacturer specifications on compatible 6V IPI systems. If you encounter issues during installation or operation, reach out to the manufacturer or seller with your fireplace model number and original part details for assistance.
Pros
- Complete all-in-one kit includes the blower, pre-wired harness, magnetic thermostat, and variable speed switch.
- Heavy-duty Class H motor insulation is rated to withstand firebox ambient temperatures up to 392°F.
- Foam mounting pads isolate motor vibration against the steel chassis to help prevent casing resonance.
- Provides effective supplemental air movement with 130 CFM while consuming only 31 watts of electricity.
Cons
- Requires an accessible 120V electrical outlet inside or near the fireplace lower service compartment.
- Compatibility is restricted to specific fireplace models, requiring buyers to verify cavity dimensions and model numbers prior to ordering.
- Operating at maximum 3000 RPM airflow will generate noticeable sound from air movement.
The Hiorucet GFK4B Blower Fan Kit is a targeted aftermarket replacement component designed to restore or enhance air circulation in specific factory-built gas fireplaces. Rather than letting usable convective heat escape up the chase or linger inside the outer firebox cavity, this tangential fan assembly directs heated air outward into the living space. It is specifically suited for homeowners, property managers, and remodelers maintaining compatible Heatilator, Majestic, Lennox, and Temco gas fireplace installations.
Airflow performance is driven by a 120V motor operating at up to 3000 RPM, delivering an airflow rating of 130 CFM while drawing a modest 31 watts. The system operates on a dual-control architecture combining automated temperature regulation with manual speed fine-tuning. The included magnetic thermostat switch mounts directly to the firebox floor or wall, turning the fan on as the fireplace warms up to roughly 120°F and powering down once the unit cools below 90°F. For custom comfort, an in-line rheostat dial allows users to regulate motor speed between whisper-quiet low circulation and full 130 CFM output.
Build quality focuses on thermal resilience and noise reduction. Fireplace blower compartments experience severe heat soaking, and this unit features Class H insulation rated to withstand operating temperatures up to 392°F. The kit includes three double-stick foam dampening pads positioned along the rear and bottom of the housing. These pads prevent direct metal-to-metal contact with the fireplace enclosure, keeping the sheet metal chassis from acting as an acoustic amplifier for normal motor vibrations.
Installation is designed for straightforward placement in the bottom cavity underneath the fireplace burner pan. The kit comes pre-wired with a standard 3-prong grounded power cord, eliminating the need for complex wire splicing. The entire assembly measures 12.5 inches in length, 3.23 inches in width, and 3.73 inches in height, with an air discharge opening measuring 9.57 inches. The magnetic thermal sensor simplifies positioning by clinging securely to any clean ferrous surface on the firebox exterior.
Clear verification of your fireplace model and electrical setup is necessary before ordering. This blower requires an energized 120V wall outlet inside the fireplace control bay, which is common in millivolt or electronic ignition fireplaces but not present in all builder-grade setups. Additionally, while the kit matches standard GFK4 and FK4 part specifications, buyers must verify available clearance beneath the firebox floor to avoid interference with gas lines, valves, or pilot assemblies.
For owners of supported Heatilator, Majestic, Temco, or Lennox fireplaces dealing with a failed factory fan or looking to extract more warmth from their existing gas hearth, the Hiorucet GFK4B kit is a practical, value-oriented solution. Its inclusion of an automatic thermal switch, speed control knob, and vibration-isolating pads makes it an effective drop-in airflow upgrade.
Compatibility for the Hiorucet GFK4B kit depends on matching specific factory part numbers or designated gas fireplace models. This blower assembly directly cross-references common OEM part designations including GFK4, GFK4A, GFK4B, FK4, and Rotom replacement numbers HB-RB74K and R7-RB74K. It is engineered to drop into factory mounting locations that share these reference specifications.
Manufacturer-listed compatible models include Heatilator NDV4236I, Lennox EDR3530 and EDT3530, as well as Majestic BC36, BC36i, BC42, and BC42i fireplaces. It also fits an extensive lineup of Temco direct-vent models, including the 33RDV, 33RDVD, 33TDV, 33TDVD, 33TDVN, 33TDVP, 36CDVR, 36CDVX, 36RDV, 36RDVD, 36TDV, 36TDVD, 36TDVN, 36TDVP, 39RDV, 39RDVD, 39TDV, 39TDVD, 39TDVN, 39TDVP, and 41DV series, alongside select CFM, Monessen, and Vermont Castings units that use the GFK4 platform.
Always verify your existing blower dimensions and model label inside your fireplace access panel before purchase. Even when a fireplace brand matches, specific sub-models or revisions can alter the lower cavity spacing, gas manifold routing, or mounting tab locations.
The blower assembly utilizes a tangential cross-flow wheel engineered to produce an airflow volume of 130 CFM at an operating speed of 3000 RPM. Unlike standard axial fans that direct air in a narrow cone, the 9.57-inch discharge vent produces a wide, uniform air sheet across the convective heat channels of the firebox.
Speed management is handled via the included rotary rheostat dial. This control allows users to dial back the motor speed when low background noise is preferred during quiet living room use, or turn it up to full velocity when fast heat distribution is needed across a larger room.
Thermal durability is supported by Class H electrical insulation, rated for safe operation in ambient conditions up to 392°F. This high thermal rating is critical for longevity, as blowers situated directly beneath gas burners must tolerate ongoing radiant heat exposure during long heating cycles.
The Hiorucet GFK4B operates on standard 120V, 60 Hz alternating current with a rated power draw of 31 watts. The unit is pre-wired to a grounded 3-prong electrical plug, designed to plug straight into the factory electrical junction box located in the fireplace control compartment.
Mounting utilizes three supplied double-stick foam pads (two positioned on the back wall and one on the bottom of the blower housing). These adhesive pads secure the fan chassis to the fireplace walls while providing acoustic isolation to minimize vibration transfer to the exterior sheet metal.
The included magnetic thermostat simplifies wiring and placement. Because it adheres magnetically to the metal surface of the firebox, it can be positioned near the hottest zone of the lower firebox without requiring screw fasteners or drilling into the fireplace casing.
Frequently Asked Questions
Can you install aftermarket glass doors on Heatilator Accelerator models?
Yes, but only if the replacement door explicitly lists your specific firebox model number on its compatibility list. Prefab units such as 36-inch Heatilator boxes require an inside-fit frame that accounts for factory sheet metal tolerances. The EZ-FIT Heatilator Prefab Fireplace Door fits models like the HB36A, HB36AI, EC36, and E36, but you must keep tracked bi-fold doors fully open while burning firewood to prevent glass breakage.
How do you choose between GFK4 and GFK4B blower kits for your fireplace?
The choice depends on your fireplace cavity depth and whether your lower firebox includes a pre-wired electrical junction box. The FireplaceBlowersOnline GFK4 kit and the Hiorucet GFK4B both deliver 130 CFM at 3000 RPM using a 120V ball-bearing motor. Both kits include magnetic thermostats and variable rheostats that automatically cycle the fan on at roughly 120 degrees Fahrenheit and off below 90 degrees.
Will the Criditpid 2090-012 natural gas pilot assembly work on propane fireplaces?
No, the Criditpid 2090-012 and HHT SRV593-512 assemblies are engineered strictly for natural gas configurations. Running a natural gas pilot assembly on liquid propane creates an incorrect fuel-to-air mixture and soot buildup due to differing orifice dimensions. Also, these assemblies are built exclusively for intermittent pilot ignition (IPI) systems and will not function with standing pilot or direct spark systems.
What symptoms indicate a failed IPI electronic control module?
A fireplace that clicks repeatedly without sparking, fails to open the main gas valve, or loses pilot flame signal typically indicates a malfunctioning ignition module. Replacement units like the SRV593-592 and JDZHYR 6V module restore communication between the wall switch, valve system, and flame sensor. You should always confirm whether your system operates on a 3V or 6V module before swapping electronic boards.
Do blowers increase the heat output of Heatilator Accelerator Herringbone Fireplaces in 2026?
No, a fireplace blower does not increase total heat output, but it dramatically improves heat circulation into the living area. Convection blowers pull cool room air under the firebox, pass it over the heated outer metal jacket, and blow it back out into the room at up to 130 CFM. Managing ash cleanout with a heavy-duty fireplace tool set also keeps the lower vents clear so airflow stays unobstructed.
Where can you find the exact model number on your Heatilator firebox?
The model and serial number tag is riveted inside the firebox cavity, usually on the upper interior wall or behind the lower access panel. Checking this metal rating plate is mandatory before ordering replacement doors, blowers, or ignition assemblies for Heatilator Accelerator Herringbone Fireplaces. Never rely on exterior decorative dimensions alone because trim styles like herringbone brick patterns can appear across multiple different cabinet sizes.


Write Your Review
No reviews yet. Be the first to share your experience!