Ages 18-24? Explore Prime for Young Adults and see if you are eligible

Ignition trouble can turn a cozy evening chilly when a pilot flame refuses to spark or repeatedly cuts out. Maintaining heatilator novus natural gas fireplaces requires matching the exact pilot mechanism built into your firebox, whether you operate an intermittent pilot ignition (IPI) module or a traditional standing pilot assembly. A worn thermocouple, oxidized thermopile, or brittle copper supply line often leads to sudden burner dropouts right when supplemental heat matters most. Checking valve styles across direct-vent heating units, much like evaluating setups for see-through flush mount gas fireplaces, ensures you select hardware rated specifically for natural gas fuel rather than propane.

Replacing a failing pilot bracket does not mean overhauling the whole firebox when you verify part numbers like 2090-012, 4021-732, or 25660 before ordering. Taking time to inspect existing burner brackets, wire lengths, and gas-line fittings prevents leaks and frustrating installation delays. Slight variations in pilot hood angles or mounting holes determine whether a replacement fits securely beside your burner tube. Selecting durable replacement assemblies protects your main gas valve, ensures consistent flame stability, and keeps your room comfortable all season long.

1
Best Seller

AMECA Natural Gas SIT Pilot Assembly 30200

AMECA
9.9 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The AMECA 30200 Natural Gas SIT Pilot Assembly is a complete replacement ignition cluster designed for Heatilator direct-vent fireplaces, bundling pilot tubing, an electrode, a thermocouple, and a thermopile. It provides a direct solution for homeowners and technicians needing to restore reliable pilot operation and millivolt valve performance on compatible models.
Pros & Cons

Pros

  • Bundles all four critical ignition and sensing components in a single pre-assembled unit
  • Direct fit replacement for part number 30200 across dozens of Heatilator direct-vent models
  • Configured specifically for natural gas installations using standard SIT mounting brackets
  • Eliminates the time and guesswork of diagnosing and replacing worn sensors individually

Cons

  • Configured exclusively for natural gas and is not compatible with liquid propane setups
  • Requires gas line disassembly, connection tightening, and thorough leak testing during installation
  • Fireplace model list is extensive and must be verified against your specific appliance rating plate
Detailed Review

The AMECA Natural Gas SIT Pilot Assembly (part number 30200) is a dedicated replacement component designed for homeowners, property managers, and service technicians maintaining compatible Heatilator direct-vent gas fireplaces. When an older direct-vent fireplace suffers from a pilot flame that will not stay lit, weak spark generation, or a burner that shuts down unexpectedly, the pilot assembly is frequently the source of the issue. This unit replaces the entire pilot bracket and sensor array in one pre-configured assembly.

This assembly provides all four primary operational elements: the pilot fuel tubing, the piezo spark electrode, a thermocouple, and a thermopile. In standard millivolt gas fireplace systems, the thermocouple acts as the primary safety mechanism by holding open the internal pilot safety magnet once heated. The thermopile generates the low-voltage electrical current required to operate the main gas valve when triggered by a wall switch or remote control. Supplying both sensors together ensures the entire millivolt circuit operates with fresh, corrosion-free connections.

Construction follows the standard SIT side-mount format, which aligns the gas hood, electrode, and sensors at precise factory angles. Proper positioning is critical for direct-vent appliances because the pilot flame must reliably bathe the thermocouple and thermopile tips while ensuring smooth cross-ignition to the main burner. The pre-installed leads and flexible gas line match standard SIT control valve layouts for direct replacement.

Installation requires shutting off the gas supply and disconnecting the old pilot line, millivolt spade terminals, and ignition wire from the control valve under the firebox. While mounting the bracket and securing the fittings requires standard hand tools, working with gas connections demands care. Every gas joint should be checked with an approved non-corrosive gas leak detection fluid prior to relighting the appliance.

A critical consideration for buyers is fuel type and valve compatibility. This assembly is designed strictly for Natural Gas (NG) systems and should not be used on Liquid Propane (LP) fireplaces without proper, manufacturer-approved conversion hardware. Additionally, because Heatilator used different pilot and valve suppliers across various production runs of the same model name, verifying the 30200 part number against your fireplace manual is an essential step before purchase.

For owners of compatible Heatilator fireplaces experiencing ignition failures or millivolt dropouts, this all-in-one replacement package offers a practical, targeted repair solution. Sourcing an assembly that includes the tubing, igniter, thermocouple, and thermopile together simplifies maintenance and restores reliable seasonal heating performance.

Replacement Compatibility

This pilot assembly is designed to replace factory part number 30200 on Heatilator direct-vent natural gas fireplaces equipped with SIT side-mount pilot assemblies.

Compatible models referenced in manufacturer documentation include Heatilator Novus series models (such as NB4236, NBV-B, NBV3630I-B, and NOVi30L), as well as ND4842, GNDC30, GNDC33, GCDC80E, CD4842IR-C, CD4236MR, CNXT90ILH, CNXT4842IH, and NNXT4236IF.

Additional compatible models include GNDH30, GNDH30L, GNRH36, GNRH36L, GNBC33, GNBC33L, GNRC33, GNRC33L, GNRC36, GNRC36L, GNRH33, GC150, GC150L, A36R, GBCL36, CFL-30NG-C, and multiple SILH variants (including SILH20E-B, SILH30E, SILH30E-B, SILH50E, SILH50E-B, SILH50EV, SILH50EV-B, SILH60E, SILH60E-B, SILH60EV, SILH60EV-B, SILH60ENH, and SILH60ENH-B).

Because fireplace manufacturers frequently update valve assemblies and pilot styles between model revisions, confirm your specific model number, serial number, and manual part list before ordering.

Installation & Fuel Notes

This pilot assembly is configured specifically for Natural Gas (NG) direct-vent fireplace installations. It is not compatible with Liquid Propane (LP) systems without appropriate conversion parts.

Working on gas-fired hearth appliances requires shutting off the upstream gas supply and turning the main gas control valve to the OFF position before starting work.

After securing the pilot mounting bracket and connecting the gas pilot tube, thermocouple, thermopile, and igniter leads, all gas fittings must be leak-tested using a certified gas leak detector fluid before operating the unit.

2
Editor's Pick

Criditpid 2090-012 Natural Gas IPI Pilot Assembly

Criditpid
9.9 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The Criditpid 2090-012 is a direct-fit replacement natural gas intermittent pilot ignition (IPI) assembly designed for select Heatilator, Heat-N-Glo, Quadra-Fire, and Majestic gas fireplaces. It is best suited for homeowners and technicians seeking an affordable, component-level repair to resolve non-lighting pilots, weak pilot flames, or flame-sensing issues on compatible NG appliances.
Pros & Cons

Pros

  • Direct fit for multiple Hearth & Home Technologies brands using part numbers 2090-012 or SRV2090-012.
  • Includes pilot burner hood, bracket, spark electrode, and flame sensor in one pre-assembled unit.
  • Significantly less expensive than original manufacturer OEM replacement kits.
  • Resolves common IPI failure symptoms like sparking without lighting or failing to sense a pilot flame.

Cons

  • Strictly for Natural Gas (NG) configurations and cannot be used on Liquid Propane (LP) fireplaces.
  • Requires careful installation as the thin copper gas tube can kink or crack if bent too sharply.
  • Incompatible with older standing continuous pilot fireplaces or hot surface ignition (HSI) modules.
Detailed Review

The Criditpid 2090-012 IPI Pilot Assembly is an aftermarket replacement part designed specifically for natural gas fireplaces built with electronic Intermittent Pilot Ignition systems. Rather than maintaining a continuous standing flame, IPI fireplaces electronically spark the pilot only when heat is demanded, lighting the main burner and extinguishing when switched off. This replacement kit serves homeowners, landlords, and hearth repair professionals dealing with failed ignition, pilot spark failures, or worn flame sensors across Hearth & Home Technologies brands like Heatilator, Heat-N-Glo, Majestic, and Quadra-Fire.

Functionally, this assembly houses the pilot burner orifice, the spark electrode, the flame sensor, and the mounting bracket in a single unified component. When your fireplace control board calls for ignition, the electrode generates a high-voltage spark to ignite the incoming natural gas stream at the pilot hood. Once lit, the integrated sensor verifies the pilot flame presence and signals the gas valve to release fuel to the main burner. Replacing a worn pilot assembly directly resolves common operational headaches such as continuous spark clicking without ignition, pilot flame blow-out, or main burners failing to engage due to weak microamp flame rectification signals.

Build quality matches standard aftermarket service components, utilizing a rigid stamped mounting bracket, a brass orifice holder, a formed copper pilot hood, and heat-rated electrical wire leads. The included pilot feed line is crafted from soft copper tubing, which allows minor positioning adjustments to align with the firebox burner floor. However, installers must take care during handling because copper tubing can kink, collapse, or fracture at the fittings if bent abruptly, which could cause a hazardous gas leak or restrict fuel flow.

Installation is straightforward for experienced DIYers or gas technicians familiar with Hearth & Home chassis layouts. The assembly mounts directly to the burner pan using the factory screw locations, while the electrical spade terminals connect directly into the module harness. Before ordering, verify that your fireplace is set up for Natural Gas (NG) and not Liquid Propane (LP). Propane uses different orifice sizes and gas pressures, and this unit is strictly sized for standard residential natural gas service. It is also completely incompatible with continuous standing pilot models or direct spark ignition (DSI) systems.

Buyers should double-check their fireplace unit serial numbers and exact model tags before purchasing. While it covers a wide variety of units like the Heat-N-Glo Mezzo series, Heatilator Crave models, and Quadra-Fire Sapphire stoves, some older model revisions (such as the Heatilator Aztec or Heat-N-Glo Bravo) only accept this part after specific serial break points. Always inspect the part number listed in your fireplace user manual to confirm that 2090-012, 2198-012, or SRV2090-012 is specified.

For owners facing an intermittent or dead pilot on an IPI natural gas fireplace, this Criditpid replacement assembly provides a reliable, budget-conscious repair path. It eliminates the need to replace entire burner plates or expensive gas control valves, restoring fast, consistent ignition to keep your hearth running smoothly through the heating season.

Replacement Compatibility

This pilot assembly replaces OEM part numbers 2090-012, 2198-012, and SRV2090-012 across Hearth & Home Technologies brands. It is designed for Natural Gas (NG) intermittent pilot ignition models only.

Compatible Heatilator models include ADVR3428I, ADVR3428IL, ADVT3428I, ADVT3428IL, Aztec (after serial # 002882484), CD4236-MOD, CD4842-MOD, Crave series (CRAVE4836, CRAVE6048, CRAVE7260, CRAVE8472 and see-through ST variants), EDV3633I, EDV3633IL, EHS3633I, Eclipse-32, Eclipse-36, GBFL4136I, GBST4336I, and GDST3831I.

Compatible Heat-N-Glo models include Bravo (after serial # 002881385), LCOR-36TRB-IPI, PIER-36TR-IPI, PIER-36TRB-IPI, RCOR-36TRB-IPI, RED40ST, ST-36TR-IPI, ST-36TRB-IPI, ST-36TVB-IPI, ST-550T-IPI, ST-550TM-IPI, 6000 series (6000CF-OAK-IPI, 6000CMOD-IPI, 6000GBV-IPI, 6000GCF-IPI, 6000G-IPI), Escape-42DV, LUX60, Mezzo series (36, 48, 60, 72 and ST see-through versions), Paloma, and Paloma-MOD.

Compatible Quadra-Fire models include QV36A-FB Expression units manufactured after February 2006, Garnet-IPI, Garnet-IPI-B, Sapphire-IPI, and Topaz-IPI. Also fits Majestic model OXDV30-IPI and Outdoor Lifestyles models ODPALG-48 and Twilight-II series (II, II-B, II-C, II-MOD).

Installation & Handling

Always shut off the main gas supply line and disconnect electrical power to the fireplace before attempting to service the pilot assembly or open the firebox glass.

Handle the soft copper pilot tubing with care. Avoid sharp 90-degree bends or crushing the line with pliers, as kinking the tube will obstruct the fuel orifice and over-bending can lead to metal fatigue or gas leakage.

After securing the pilot mounting bracket and threading the gas compression fitting, verify all gas joints using an approved non-corrosive gas leak detection fluid or electronic sniffer prior to lighting the appliance.

If you are unfamiliar with gas line connections, microamp flame rectification testing, or IPI control modules, hire a certified hearth specialist or licensed gas fitter to perform the replacement.

3
Limited Time

Hiorucet 2090-012 Natural Gas IPI Pilot Assembly

Hiorucet
9.8 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The Hiorucet 2090-012 is a direct-replacement natural gas IPI pilot assembly designed to restore reliable electronic ignition on select Heatilator, Heat-N-Glo, Quadra-Fire, and Majestic fireplaces. It is an ideal fit for fireplace owners and technicians needing an exact replacement for part numbers 2090-012 or SRV2090-012 without modifying existing burner brackets.
Pros & Cons

Pros

  • Direct replacement fit for part numbers 2090-012, 2198-012, and SRV2090-012
  • Generous 24-inch pilot tube and lead wires facilitate straightforward routing
  • Includes pre-assembled burner mounting bracket for precise flame alignment
  • Broad compatibility covering multiple major gas fireplace brands

Cons

  • Configured for Natural Gas only and cannot be used with Liquid Propane (LP)
  • Incompatible with standing pilot, Direct Spark (DSI), or Hot Surface Ignition (HSI) systems
  • Copper pilot tube is fragile and prone to damage if bent too sharply during installation
Detailed Review

The Hiorucet 2090-012 Natural Gas IPI Pilot Assembly is an aftermarket replacement part engineered for gas fireplaces experiencing failure to spark, delayed pilot ignition, or flame-sensing dropouts. Designed specifically for appliances utilizing electronic Intermittent Pilot Ignition (IPI), this unit directly replaces factory part numbers 2090-012, 2198-012, and SRV2090-012. It serves homeowners, property managers, and service technicians seeking to restore reliable seasonal operation on select Heatilator, Heat-N-Glo, Quadra-Fire, Majestic, and Outdoor Lifestyles gas fireplace models.

Fuel and ignition compatibility represent the most critical operational parameters for this replacement part. This assembly is factory-configured strictly for natural gas fuel supplies and should never be installed in liquid propane units without appropriate factory conversion hardware. Additionally, this kit is dedicated solely to electronic IPI controls. It cannot be used to service standing pilot systems with continuous pilot lights, nor will it work with Direct Spark Ignition (DSI) or Hot Surface Ignition (HSI) control setups.

The build incorporates standard pilot hardware components, featuring an integrated pilot hood, spark electrode, flame sensor, and burner mounting bracket. Connected to the pilot head are 24-inch lead wires and a 24-inch copper pilot gas delivery tube. The copper line is designed to route through the fireplace chassis to the main gas control valve, but the material is inherently delicate. Installers must handle the tubing with care, as excessive bending or kinking can restrict natural gas flow or create micro-fractures that lead to dangerous fuel leaks.

Replacing a fireplace pilot assembly involves specific mechanical and safety steps. Prior to servicing, the gas supply line to the fireplace must be shut off completely, and power to the electronic ignition module must be disconnected. The included bracket mounts adjacent to the main burner to ensure proper spark delivery and pilot flame impingement onto the main gas stream. After installation, all disturbed gas connections must be verified with an approved gas-leak detector solution before firing the fireplace or reinstalling decorative media and glass.

Buyers should confirm exact appliance compatibility against their fireplace data plate prior to ordering. The Hiorucet 2090-012 supports a wide selection of popular models, such as the Heatilator CRAVE, CD, and NDV series, as well as the Heat-N-Glo 6000 series and SL series. However, because manufacturers frequently updated ignition systems across different production dates and serial numbers, matching the physical part number from the existing pilot assembly remains essential for ensuring a proper fit.

For owners of compatible natural gas fireplaces facing intermittent ignition faults, worn electrodes, or degraded pilot flame sensors, this assembly provides a practical, direct-fit solution. By including the appropriate mounting bracket and ample 24-inch line lengths, it delivers the necessary hardware to restore clean, reliable ignition to a central living room or family room fireplace.

Replacement Compatibility

This pilot assembly directly replaces original equipment part numbers 2090-012, 2198-012, and SRV2090-012 across several Hearth & Home Technologies fireplace brands.

Supported Heatilator models include ADVR3428I, ADVR3428IL, ADVT3428I, ADVT3428IL, AZTEC (serial numbers after 002882484), CD4236-MOD, CD4842-MOD, CRAVE series (4836, 4836ST, 6048, 6048ST, 7260, 7260ST, 8472, 8472ST), EDV3633I, EDV3633IL, EHS3633I, ECLIPSE-32, ECLIPSE-36, GBFL4136I, GBST4336I, GDST3831I, NDV4236I, and NBV series (NBV3630I, NBV3933I, NBV4236I, NBV4842I).

Supported Heat-N-Glo models include BRAVO (serial numbers after 002881385), LCOR-36TRB-IPI, PIER-36TR-IPI, PIER-36TRB-IPI, RCOR-36TRB-IPI, RED40ST, ST-36TR-IPI, ST-36TRB-IPI, ST-36TVB-IPI, ST-550T-IPI, ST-550TM-IPI, 6000CF-OAK-IPI, 6000CMOD-IPI, SL-350TRS-IPI, SL-550BE-IPI, SL-550BE-IPI-B, SL-550BE-M-IPI, and SL-550F.

Supported Quadra-Fire, Majestic, and Outdoor Lifestyles models include the QV36A-FB (Expression units made after February 2006), GARNET-IPI, GARNET-IPI-B, SAPPHIRE-IPI, TOPAZ-IPI, Majestic OXDV30-IPI, and Outdoor Lifestyles ODPALG-48 and TWILIGHT-II variants.

System limitation: This part is compatible solely with Intermittent Pilot Ignition (IPI) using Natural Gas. It will not work with liquid propane (LP), standing pilot systems, Direct Spark Ignition (DSI), or Hot Surface Ignition (HSI) fireplaces.

Installation & Handling

Always shut off the gas supply feeding the appliance and disconnect electrical power from the electronic control board before beginning installation work.

The pilot feed line is manufactured from soft copper tubing. Take extra care when uncoiling and guiding the 24-inch tube to avoid kinks, sharp bends, or flattening, which can restrict fuel delivery or induce fractures that lead to gas leaks.

Mount the integrated bracket securely beside the burner using original mounting screws to maintain factory spacing between the spark tip, flame sensor, and main burner ports.

Once connected, test every threaded connection with an approved non-corrosive gas leak detection fluid while the gas supply is active before attempting to reignite the pilot or replace decorative media.

4
Top Rated

Viefow Natural Gas Standing Pilot Assembly

Viefow
9.8 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The Viefow 4021-732 Natural Gas Pilot Assembly is an all-in-one standing pilot replacement kit designed to restore reliable burner ignition in select Heatilator, Heat-N-Glo, and Quadrafire direct-vent gas fireplaces. It is an ideal fix for homeowners and maintenance personnel seeking a pre-assembled unit with the thermopile, thermocouple, electrode, and mounting bracket ready to install.
Pros & Cons

Pros

  • Includes all vital pilot components in one pre-assembled unit, saving time during ignition repairs
  • Direct OEM cross-reference support for part numbers 4021-732, 25660, and SRV4021-732
  • Durable copper pilot construction and rigid bracket maintain proper sensor spacing inside direct-vent fireboxes
  • Standardized direct-vent fit avoids the need to bend, modify, or fabricate custom mounting brackets

Cons

  • Strictly designed for natural gas systems and cannot be used with liquid propane (LP) fuel
  • Incompatible with SIT valves and electronic direct spark ignition (DSI) systems
  • Requires exact model, series, and serial number verification before ordering to guarantee proper fit
Detailed Review

The Viefow Natural Gas Pilot Assembly Replacement (part numbers 4021-732 and 25660) is an all-in-one repair assembly engineered for direct-vent gas fireplaces and inserts experiencing pilot ignition or flame-sensing failure. This complete unit is targeted at gas fireplace owners, property managers, and repair technicians seeking to restore dependable operation to natural gas standing pilot systems. Because it bundles the thermopile, thermocouple, pilot tubing, sparker electrode, and mounting bracket into a single assembly, it removes the guesswork of ordering and assembling individual ignition hardware.

Functionally, this pilot assembly provides the flame stability and millivolt generation required to keep a standing pilot gas valve operating properly. Direct-vent standing pilot systems depend on the pilot flame to continuously bathe both the thermocouple (which holds the safety valve open) and the thermopile (which produces the electrical current needed to switch on the main burner). Replacing an aged, soot-covered, or mechanically degraded pilot assembly restores reliable flame contact across these sensors, resolving common problems like pilot lights that extinguish when the knob is released or main burners that fail to ignite.

In terms of construction, the unit utilizes copper pilot components paired with a heavy-duty fixed mounting bracket designed to handle repeated high-temperature heating cycles. The silvery metal bracket holds the electrode, pilot hood, and sensor probes in strict alignment relative to the burner flame path. By preserving the factory-specified spatial relationship out of the box, the assembly ensures clean spark ignition from the electrode and uniform flame impingement across both the thermocouple and thermopile.

Measuring approximately 10 by 1.2 by 1.2 inches and weighing under half a pound, the assembly matches standard direct-vent fireplace mounting footprints. It is engineered to follow standard gas fireplace replacement procedures without requiring bracket cutting or custom metalwork. While installation is straightforward for those familiar with gas hearth maintenance, the process involves disconnecting gas supply lines and sensor leads, making leak checking essential. Homeowners unfamiliar with direct-vent gas line connections or electrical millivolt circuits should hire a qualified gas professional.

A critical consideration with this pilot assembly is its strict fuel and component compatibility limits. This replacement is designed exclusively for natural gas (NG) standing pilot appliances and cannot be used on liquid propane (LP) systems. Furthermore, it is not compatible with SIT gas valves or direct spark ignition (DSI) electronic ignition setups. Buyers must inspect their fireplace data plate to verify the manufacturer, exact model line, serial number, and valve brand prior to purchase.

Overall, the Viefow 4021-732 Natural Gas Pilot Assembly offers a practical, budget-conscious solution for reviving compatible Heatilator, Heat-N-Glo, and Quadrafire direct-vent gas fireplaces. If your natural gas fireplace suffers from a finicky pilot flame, weak millivoltage, or failed spark generation, this direct-fit assembly delivers all the necessary components in a durable, ready-to-mount format.

Replacement Compatibility

Compatibility for the Viefow pilot assembly is governed by specific OEM part numbers, fuel configuration, and fireplace series. This unit directly replaces factory part numbers 4021-732, 25660, SRV4021-732, 25174, and SRV25174 across direct-vent gas fireplaces and inserts.

Supported hearth brands include Heatilator, Heat-N-Glo (particularly models within the R-CAST series), and Quadrafire (specifically DV series direct-vent units). Because mounting hole patterns and probe lengths vary across manufacturing runs, verifying the exact serial number range on your fireplace rating plate is strongly advised before ordering.

This pilot assembly features explicit exclusions. It does not fit appliances equipped with SIT brand gas valves, direct spark ignition (DSI) control modules, or intermittent pilot ignition (IPI) electronic packs. Always confirm your firebox uses a continuous standing pilot valve system rather than an electronic module.

Fuel & Venting

This pilot assembly is configured strictly for natural gas (NG) operation. It cannot be used with liquid propane (LP) without risking severe sooting, improper flame size, or safety hazards, as pilot orifice sizes differ substantially between fuel types.

The assembly is intended for direct-vent gas hearth appliances, which pull combustion air from outdoors and exhaust flue gases through a sealed, co-axial or co-linear venting system. The fixed bracket design helps maintain correct pilot flame stability inside the sealed combustion chamber characteristic of direct-vent fireboxes.

Ensure your home fuel supply matches the natural gas specification of your fireplace. If your appliance is connected to a propane tank or an unvented firebox, this assembly is not suitable.

5

Palart Natural Gas Pilot Assembly for Heatilator

palart
9.8 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The palart natural gas pilot assembly is a direct replacement component engineered for select Heatilator standing pilot stoves and fireplaces requiring part numbers 25660 or 4021-732. It provides a focused repair solution for homeowners restoring reliable burner ignition, provided the appliance operates on natural gas and does not utilize an SIT valve.
Pros & Cons

Pros

  • Direct cross-reference to OEM Heatilator part numbers 25660 and 4021-732
  • Pre-configured specifically for natural gas fuel lines
  • Cost-effective alternative to complete burner pan or valve replacements
  • Clear manufacturer compatibility restriction regarding SIT valves prevents ordering mistakes

Cons

  • Explicitly incompatible with SIT valve assemblies
  • Designed only for natural gas (NG) and not interchangeable with liquid propane (LP)
  • Requires professional gas service or experienced mechanical knowledge to install safely
Detailed Review

The palart Natural Gas Pilot Assembly (parts 25660 and 4021-732) is a specialized replacement component designed for select Heatilator gas fireplaces and stoves. This assembly is specifically geared toward homeowners, property managers, and maintenance personnel looking to service an existing standing pilot appliance that struggles to stay lit or ignite properly. Rather than replacing an entire hearth system, sourcing an exact-fit pilot mechanism provides a practical path to restoring standard burner ignition.

Operating performance centers on maintaining a steady standing pilot flame for natural gas combustion. In compatible Heatilator standing pilot configurations, the pilot assembly delivers the small, continuous flame needed to reliably ignite the main burner when the wall switch or thermostat calls for heat. Over years of regular heating seasons, factory pilot orifices can corrode, carbon up, or suffer from weak flame patterns, making a fresh assembly essential for smooth, dependable operation.

Construction features standard gas appliance pilot components configured to match the original 25660 and 4021-732 specifications. While palart lists the primary finish as black, the assembly includes the necessary mounting structure, pilot hood, and feed tubing connections required for standard drop-in positioning on compatible Heatilator burner pans. The build provides direct mechanical alignment for standard standing pilot brackets used in original factory setups.

Installation requires careful mechanical and fuel-line management. Servicing any natural gas component demands completely shutting off the gas supply before disassembly, checking for leaks using approved detection fluid after reconnection, and verifying steady flame characteristics prior to closing the fireplace doors. Homeowners should consult their fireplace user manual or hire a qualified gas professional if they lack experience working with pressurized fuel lines and draft hoods.

Clear compatibility boundaries are the primary limitation of this part. The manufacturer explicitly states that this pilot is designed for standing pilot units only and does not work with SIT valve systems. Additionally, this assembly is manufactured exclusively for natural gas (NG) and is not cross-compatible with liquid propane (LP) configurations without specific manufacturer-approved conversion hardware that is not included here.

For owners of compatible Heatilator standing pilot fireplaces requiring part numbers 25660 or 4021-732, this replacement pilot assembly offers a focused and cost-effective repair part. Always verify your fireplace model number, existing gas valve type, and fuel supply line before ordering to ensure correct fit and safe hearth performance.

Replacement Compatibility

This replacement pilot assembly corresponds to Heatilator part numbers 25660 and 4021-732. It is intended strictly for select Heatilator natural gas (NG) stoves and fireplaces operating on a continuous standing pilot system.

Crucial exclusions apply: this component does not work with SIT gas valves and is not rated for propane (LP) installations. Before purchasing, check your fireplace rating plate or parts manual to confirm both the exact part number and the valve brand installed inside your hearth.

6

Pellethead 4021-736 Natural Gas Pilot Burner

Pellethead
9.5 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The Pellethead 4021-736 Natural Gas Pilot Burner Assembly is a direct replacement component engineered for select Heatilator, Heat N Glo, and Quadra-Fire gas fireplaces. Backed by a 2-year warranty, it offers an OEM-quality solution for homeowners seeking to resolve pilot ignition issues on compatible natural gas setups.
Pros & Cons

Pros

  • Direct replacement cross-reference for OEM part numbers 4021-736 and 485-510A
  • Specifically designed for natural gas (NG) fireplaces
  • Comes with a 2-year manufacturer warranty for reliability
  • Sturdy steel construction built for everyday hearth conditions

Cons

  • Configured strictly for natural gas and cannot be used in propane (LP) configurations
  • Requires cross-referencing your exact fireplace model and serial tag before purchasing
  • Working with gas lines and ignition systems may require professional installation
Detailed Review

The Pellethead 4021-736 Natural Gas Pilot Burner Assembly is a targeted replacement component designed for existing gas fireplaces across the Heatilator, Heat N Glo, and Quadra-Fire product lines. It serves homeowners, property managers, and repair technicians troubleshooting pilot lighting failures, weak pilot flames, or worn ignition hardware. If your fireplace uses natural gas and calls for OEM part number 4021-736 or 485-510A, this assembly provides a direct repair avenue to get your hearth running again.

Functionally, a pilot burner assembly is the core of your fireplace ignition sequence, maintaining the standing or intermittent flame required to safely ignite the main burner. Over seasons of use, factory pilot assemblies can suffer from carbon buildup, clogged orifices, or corrosion from combustion byproducts. Replacing the worn assembly with this dedicated natural gas unit helps re-establish a stable, clean flame that reliably warms the thermopile or sensor, allowing the fireplace to start without sputtering or clicking out.

Build quality centers on durable steel components engineered to withstand continuous exposure to pilot flame temperatures. Pellethead backs this replacement with a 2-year warranty, which provides extra reassurance over standard generic replacement parts. The factory-style mounting points and brackets are built to line up with the original manufacturer specifications, ensuring proper orientation toward the main burner tube.

Installation involves working directly with fireplace gas tubing and sensitive electrical or pilot connections. While seasoned DIYers with gas appliance experience can swap out the assembly, working with fuel-gas components requires strict adherence to local building codes. Turning off the gas supply and verifying gas-tight connections with leak-detection solution is mandatory, and consulting a licensed gas technician is strongly advised if you are uncomfortable servicing gas lines.

The primary limitation is strict fuel and model specificity. This pilot burner is strictly designed for natural gas (NG) units and cannot be used with liquid propane (LP) without risking unsafe operation or improper combustion. Additionally, exact fit depends entirely on your fireplace model; it is not a universal pilot assembly and should never be forced into non-compatible fireboxes.

For owners of compatible Heatilator, Heat N Glo, or Quadra-Fire natural gas fireplaces, the Pellethead 4021-736 assembly is a sensible, practical investment. Its 2-year warranty, sturdy steel build, and direct OEM cross-referencing make it an excellent repair part to restore dependable warmth and ambiance to your living space.

Replacement Compatibility

Cross-referencing part numbers is essential before ordering any gas fireplace replacement component. This assembly directly replaces OEM part numbers 4021-736 and 485-510A across supported Heatilator, Heat N Glo, and Quadra-Fire gas fireplace models.

Do not assume compatibility based on visual similarity alone. Check the rating plate located inside your fireplace control compartment or consult your owner manual to verify both the original part number and the approved fuel source.

Fuel & Safety

This pilot burner assembly is manufactured strictly for natural gas (NG) appliances. Natural gas and liquid propane operate under different pressures and require specific orifice sizing, meaning this part must never be installed in a propane fireplace.

Always shut off the gas supply and electrical power before inspecting or servicing any fireplace component. Because improper gas installation carries serious safety risks, local codes may require installation and pressure testing by a certified gas professional.

Frequently Asked Questions About Gas Fireplace Maintenance

How do I know if my Heatilator Novus fireplace uses an IPI or standing pilot assembly?

Check whether your fireplace has a continuous burning flame or an electronic sparker that clicks on demand. Standing pilot systems keep a flame burning constantly and rely on a thermocouple and thermopile to generate millivolts for the gas valve. In contrast, intermittent pilot ignition (IPI) units like the 2090-012 use an electronic module to light the pilot only when calling for heat. Inspecting the model tag behind the lower access panel confirms your factory ignition type.

Can I install a natural gas pilot assembly in a propane fireplace?

No, natural gas pilot assemblies cannot be installed in propane units without the correct conversion orifice. Natural gas operates at different manifold pressures than liquid propane, meaning pilot injector orifices differ in size to maintain a balanced flame. Using an incompatible pilot assembly creates severe soot accumulation, incomplete combustion, or ignition failure. Always verify whether your fireplace rating plate specifies natural gas (NG) or liquid propane (LP) before ordering parts.

Why does the pilot flame fail to stay lit on my gas fireplace?

A weakened thermocouple or thermopile is typically responsible for a pilot flame dropping out once you release the control knob. Over time, metal degradation prevents these safety sensors from generating enough millivoltage to keep the gas valve open. While clearing minor carbon build-up can help temporarily, replacing the worn assembly is often necessary to restore steady operation across contemporary gas fireplaces and older direct-vent models.

Do replacement pilot assemblies for heatilator novus natural gas fireplaces include brackets and wiring?

Yes, most complete replacement kits include the fixed mounting bracket, spark igniter electrode wire, pilot gas tubing, and thermocouple. Products such as the Hiorucet 2090-012 feature 24-inch wire leads and copper tubing designed to route through standard firebox floor openings. While pre-assembled kits simplify replacement, take care not to bend the copper line excessively during installation to avoid gas leaks.

How often should I inspect the pilot burner and hearth area?

Inspecting your fireplace components at least once a year before the winter heating season begins ensures safe, efficient operation. Clearing dust, pet hair, and carbon debris away from the burner tray prevents delayed ignition and erratic pilot flames. Making sure your installation area maintains proper clearances alongside sturdy fireplace hearths protects surrounding flooring while delivering reliable supplemental warmth.